! Started logfile: J1110+4817_S_2017_02_24_pus_uvs.log on Sat May 4 11:25:33 2019 obs J1110+4817_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1110+4817_S_2017_02_24_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.854078 visibilities/baseline/integration-bin. ! Found source: J1110+4817 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 26596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1110+4817_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 656 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.865404Jy sigma=0.008046 ! Fit after self-cal, rms=0.857653Jy sigma=0.007984 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=4.262 mas, bpa=-6.434 degrees ! Estimated noise=1018.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10697 Jy ! Component: 100 - total flux cleaned = 0.1425 Jy ! Total flux subtracted in 100 components = 0.1425 Jy ! Clean residual min=-0.020494 max=0.074143 Jy/beam ! Clean residual mean=0.000020 rms=0.005332 Jy/beam ! Combined flux in latest and established models = 0.1425 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.1425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149941Jy sigma=0.001215 ! Fit after self-cal, rms=0.149981Jy sigma=0.001213 ! Inverting map ! Added new window around map position (-13.5, -18). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0605917 Jy ! Component: 100 - total flux cleaned = 0.0879431 Jy ! Total flux subtracted in 100 components = 0.0879431 Jy ! Clean residual min=-0.012515 max=0.019362 Jy/beam ! Clean residual mean=0.000026 rms=0.002844 Jy/beam ! Combined flux in latest and established models = 0.230443 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.230443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117770Jy sigma=0.000885 ! Fit after self-cal, rms=0.114501Jy sigma=0.000848 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243089 Jy ! Component: 100 - total flux cleaned = 0.0404655 Jy ! Total flux subtracted in 100 components = 0.0404655 Jy ! Clean residual min=-0.008240 max=0.016803 Jy/beam ! Clean residual mean=0.000014 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 0.270909 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 47 components and 0.270909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106291Jy sigma=0.000766 ! Fit after self-cal, rms=0.106004Jy sigma=0.000762 ! Inverting map ! Added new window around map position (-2.5, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016226 Jy ! Component: 100 - total flux cleaned = 0.0264851 Jy ! Total flux subtracted in 100 components = 0.0264851 Jy ! Clean residual min=-0.005807 max=0.006532 Jy/beam ! Clean residual mean=0.000007 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 0.297394 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.297394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102198Jy sigma=0.000724 ! Fit after self-cal, rms=0.102065Jy sigma=0.000722 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.284 mas, bmaj=5.044 mas, bpa=0.1097 degrees ! Estimated noise=511.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123738 Jy ! Component: 100 - total flux cleaned = 0.0210624 Jy ! Component: 150 - total flux cleaned = 0.0276858 Jy ! Component: 200 - total flux cleaned = 0.032885 Jy ! Total flux subtracted in 200 components = 0.032885 Jy ! Clean residual min=-0.004316 max=0.006167 Jy/beam ! Clean residual mean=-0.000014 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.330279 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 95 components and 0.330279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099440Jy sigma=0.000701 ! Fit after self-cal, rms=0.099376Jy sigma=0.000700 ! Inverting map ! Added new window around map position (2.5, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620717 Jy ! Component: 100 - total flux cleaned = 0.0104541 Jy ! Component: 150 - total flux cleaned = 0.0139132 Jy ! Component: 200 - total flux cleaned = 0.016797 Jy ! Total flux subtracted in 200 components = 0.016797 Jy ! Clean residual min=-0.003610 max=0.003780 Jy/beam ! Clean residual mean=-0.000012 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.347076 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 125 components and 0.347076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098591Jy sigma=0.000695 ! Fit after self-cal, rms=0.098541Jy sigma=0.000694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.02 KP 0.98 ! LA 0.94 MK 0.98 NL 1.00 OV 1.04 ! PT 0.99 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 1.04 KP 0.94 ! LA 0.92 MK 0.98 NL 0.98 OV 1.09 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.02 KP 1.04 ! LA 1.04 MK 0.99 NL 1.09 OV 1.00 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.01 KP 1.00* ! LA 1.06 MK 1.24 NL 1.00* OV 1.04 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.098541Jy sigma=0.000694 ! Fit after self-cal, rms=0.094490Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.292 mas, bmaj=5.057 mas, bpa=1.675 degrees ! Estimated noise=512.122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251938 Jy ! Component: 100 - total flux cleaned = 0.00428382 Jy ! Component: 150 - total flux cleaned = 0.00564379 Jy ! Component: 200 - total flux cleaned = 0.00675561 Jy ! Total flux subtracted in 200 components = 0.00675561 Jy ! Clean residual min=-0.002984 max=0.002666 Jy/beam ! Clean residual mean=-0.000008 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.353831 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 150 components and 0.353831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094298Jy sigma=0.000683 ! Fit after self-cal, rms=0.094293Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094293Jy sigma=0.000683 ! Fit after self-cal, rms=0.090558Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=5.058 mas, bpa=1.783 degrees ! Estimated noise=515.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160344 Jy ! Component: 100 - total flux cleaned = 0.00281204 Jy ! Component: 150 - total flux cleaned = 0.00378032 Jy ! Component: 200 - total flux cleaned = 0.00454514 Jy ! Total flux subtracted in 200 components = 0.00454514 Jy ! Clean residual min=-0.001799 max=0.002100 Jy/beam ! Clean residual mean=-0.000007 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.358376 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 165 components and 0.358376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090464Jy sigma=0.000679 ! Fit after self-cal, rms=0.090445Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605107 Jy ! Component: 100 - total flux cleaned = 0.000958716 Jy ! Component: 150 - total flux cleaned = 0.00115313 Jy ! Component: 200 - total flux cleaned = 0.00131102 Jy ! Total flux subtracted in 200 components = 0.00131102 Jy ! Clean residual min=-0.001767 max=0.002059 Jy/beam ! Clean residual mean=-0.000007 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.359687 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 178 components and 0.359687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090416Jy sigma=0.000679 ! Fit after self-cal, rms=0.090415Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090415Jy sigma=0.000679 ! Fit after self-cal, rms=0.091063Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.282 mas, bmaj=5.055 mas, bpa=2.353 degrees ! Estimated noise=518.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130673 Jy ! Component: 100 - total flux cleaned = 0.00223297 Jy ! Component: 150 - total flux cleaned = 0.002982 Jy ! Component: 200 - total flux cleaned = 0.0034444 Jy ! Total flux subtracted in 200 components = 0.0034444 Jy ! Clean residual min=-0.001805 max=0.002026 Jy/beam ! Clean residual mean=-0.000008 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.363132 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 183 components and 0.363132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090984Jy sigma=0.000679 ! Fit after self-cal, rms=0.090982Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356241 Jy ! Component: 100 - total flux cleaned = 0.000681315 Jy ! Component: 150 - total flux cleaned = 0.000894808 Jy ! Component: 200 - total flux cleaned = 0.00105552 Jy ! Total flux subtracted in 200 components = 0.00105552 Jy ! Clean residual min=-0.001815 max=0.002015 Jy/beam ! Clean residual mean=-0.000008 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.364187 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 186 components and 0.364187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090959Jy sigma=0.000679 ! Fit after self-cal, rms=0.090958Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090958Jy sigma=0.000679 ! Fit after self-cal, rms=0.091690Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.944 mas, bmaj=8.63 mas, bpa=21.92 degrees ! Estimated noise=635.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193621 Jy ! Component: 100 - total flux cleaned = 0.00314372 Jy ! Component: 150 - total flux cleaned = 0.00400582 Jy ! Component: 200 - total flux cleaned = 0.00465125 Jy ! Total flux subtracted in 200 components = 0.00465125 Jy ! Clean residual min=-0.002494 max=0.002289 Jy/beam ! Clean residual mean=-0.000018 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.368838 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 200 components and 0.368838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091607Jy sigma=0.000679 ! Fit after self-cal, rms=0.091604Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643493 Jy ! Component: 100 - total flux cleaned = 0.00109625 Jy ! Component: 150 - total flux cleaned = 0.00144286 Jy ! Component: 200 - total flux cleaned = 0.00171081 Jy ! Total flux subtracted in 200 components = 0.00171081 Jy ! Clean residual min=-0.002491 max=0.002247 Jy/beam ! Clean residual mean=-0.000017 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.370549 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 217 components and 0.370549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091590Jy sigma=0.000679 ! Fit after self-cal, rms=0.091590Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.278 mas, bmaj=5.053 mas, bpa=2.863 degrees ! Estimated noise=522.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.278 x 5.053 at 2.863 degrees (North through East) ! Clean map min=-0.0018934 max=0.14293 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=4.262 mas, bpa=-3.421 degrees ! Estimated noise=1042.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121928 Jy ! Component: 100 - total flux cleaned = 0.180994 Jy ! Component: 150 - total flux cleaned = 0.21948 Jy ! Component: 200 - total flux cleaned = 0.246845 Jy ! Total flux subtracted in 200 components = 0.246845 Jy ! Clean residual min=-0.007506 max=0.015461 Jy/beam ! Clean residual mean=0.000008 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 0.246846 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.246846 Jy ! Inverting map and beam ! Estimated beam: bmin=4.278 mas, bmaj=5.053 mas, bpa=2.863 degrees ! Estimated noise=522.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.027458 Jy ! Component: 100 - total flux cleaned = 0.0464107 Jy ! Component: 150 - total flux cleaned = 0.0601164 Jy ! Component: 200 - total flux cleaned = 0.0705754 Jy ! Total flux subtracted in 200 components = 0.0705754 Jy ! Clean residual min=-0.003540 max=0.006196 Jy/beam ! Clean residual mean=-0.000021 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.317421 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 73 components and 0.317421 Jy ! Inverting map ! Added new window around map position (-9.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00839842 Jy ! Component: 100 - total flux cleaned = 0.0152728 Jy ! Component: 150 - total flux cleaned = 0.0209398 Jy ! Component: 200 - total flux cleaned = 0.0256549 Jy ! Total flux subtracted in 200 components = 0.0256549 Jy ! Clean residual min=-0.002430 max=0.003079 Jy/beam ! Clean residual mean=-0.000015 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.343076 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 114 components and 0.343076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.944 mas, bmaj=8.63 mas, bpa=21.92 degrees ! Estimated noise=635.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663084 Jy ! Component: 100 - total flux cleaned = 0.0112564 Jy ! Component: 150 - total flux cleaned = 0.014693 Jy ! Component: 200 - total flux cleaned = 0.0173746 Jy ! Total flux subtracted in 200 components = 0.0173746 Jy ! Clean residual min=-0.002517 max=0.002526 Jy/beam ! Clean residual mean=-0.000023 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.360451 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214384 Jy ! Component: 100 - total flux cleaned = 0.00388082 Jy ! Component: 150 - total flux cleaned = 0.00529758 Jy ! Component: 200 - total flux cleaned = 0.00645901 Jy ! Total flux subtracted in 200 components = 0.00645901 Jy ! Clean residual min=-0.002323 max=0.002338 Jy/beam ! Clean residual mean=-0.000019 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.36691 Jy ! Adding 169 model components to the UV plane model. ! The established model now contains 269 components and 0.36691 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.278 mas, bmaj=5.053 mas, bpa=2.863 degrees ! Estimated noise=522.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688449 Jy ! Component: 100 - total flux cleaned = 0.00128936 Jy ! Component: 150 - total flux cleaned = 0.00188189 Jy ! Component: 200 - total flux cleaned = 0.00219817 Jy ! Total flux subtracted in 200 components = 0.00219817 Jy ! Clean residual min=-0.002000 max=0.002140 Jy/beam ! Clean residual mean=-0.000008 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.369108 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 284 components and 0.369108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091615Jy sigma=0.000679 ! Fit after self-cal, rms=0.091607Jy sigma=0.000679 wmodel J1110+4817_S_2017_02_24_pus_map.mod ! Writing 284 model components to file: J1110+4817_S_2017_02_24_pus_map.mod wobs J1110+4817_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1110+4817_S_2017_02_24_pus_uvs.fits wwins J1110+4817_S_2017_02_24_pus_map.win ! wwins: Wrote 5 windows to J1110+4817_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112317 Jy ! Component: 100 - total flux cleaned = -0.000464933 Jy ! Component: 150 - total flux cleaned = -0.000710023 Jy ! Component: 200 - total flux cleaned = -0.000916144 Jy ! Component: 250 - total flux cleaned = -0.00108717 Jy ! Component: 300 - total flux cleaned = -0.00119833 Jy ! Component: 350 - total flux cleaned = -0.00127958 Jy ! Component: 400 - total flux cleaned = -0.00133234 Jy ! Component: 450 - total flux cleaned = -0.0014096 Jy ! Component: 500 - total flux cleaned = -0.00158531 Jy ! Component: 550 - total flux cleaned = -0.00168401 Jy ! Component: 600 - total flux cleaned = -0.0018049 Jy ! Component: 650 - total flux cleaned = -0.00182874 Jy ! Component: 700 - total flux cleaned = -0.00187574 Jy ! Component: 750 - total flux cleaned = -0.0019217 Jy ! Component: 800 - total flux cleaned = -0.00187641 Jy ! Component: 850 - total flux cleaned = -0.00194277 Jy ! Component: 900 - total flux cleaned = -0.00196443 Jy ! Component: 950 - total flux cleaned = -0.00200716 Jy ! Component: 1000 - total flux cleaned = -0.00204955 Jy ! Component: 1050 - total flux cleaned = -0.00202832 Jy ! Component: 1100 - total flux cleaned = -0.00211135 Jy ! Component: 1150 - total flux cleaned = -0.00217238 Jy ! Component: 1200 - total flux cleaned = -0.00217195 Jy ! Component: 1250 - total flux cleaned = -0.00223181 Jy ! Component: 1300 - total flux cleaned = -0.00219242 Jy ! Component: 1350 - total flux cleaned = -0.00219266 Jy ! Component: 1400 - total flux cleaned = -0.00219262 Jy ! Component: 1450 - total flux cleaned = -0.00223054 Jy ! Component: 1500 - total flux cleaned = -0.00223049 Jy ! Component: 1550 - total flux cleaned = -0.00223028 Jy ! Component: 1600 - total flux cleaned = -0.00215765 Jy ! Component: 1650 - total flux cleaned = -0.00224742 Jy ! Component: 1700 - total flux cleaned = -0.00221195 Jy ! Component: 1750 - total flux cleaned = -0.00224688 Jy ! Component: 1800 - total flux cleaned = -0.00215995 Jy ! Component: 1850 - total flux cleaned = -0.00221179 Jy ! Component: 1900 - total flux cleaned = -0.00214365 Jy ! Component: 1950 - total flux cleaned = -0.00219446 Jy ! Component: 2000 - total flux cleaned = -0.00226128 Jy ! Component: 2050 - total flux cleaned = -0.00226115 Jy ! Component: 2100 - total flux cleaned = -0.00224482 Jy ! Component: 2150 - total flux cleaned = -0.00227729 Jy ! Component: 2200 - total flux cleaned = -0.00227732 Jy ! Component: 2250 - total flux cleaned = -0.00230878 Jy ! Component: 2300 - total flux cleaned = -0.00224558 Jy ! Component: 2350 - total flux cleaned = -0.00227694 Jy ! Component: 2400 - total flux cleaned = -0.00229227 Jy ! Component: 2450 - total flux cleaned = -0.00230757 Jy ! Component: 2500 - total flux cleaned = -0.0022926 Jy ! Component: 2550 - total flux cleaned = -0.0023379 Jy ! Component: 2600 - total flux cleaned = -0.00236786 Jy ! Component: 2650 - total flux cleaned = -0.00235314 Jy ! Component: 2700 - total flux cleaned = -0.0023973 Jy ! Component: 2750 - total flux cleaned = -0.00236805 Jy ! Component: 2800 - total flux cleaned = -0.00235371 Jy ! Component: 2850 - total flux cleaned = -0.00233941 Jy ! Component: 2900 - total flux cleaned = -0.00239636 Jy ! Component: 2950 - total flux cleaned = -0.00234002 Jy ! Component: 3000 - total flux cleaned = -0.00238197 Jy ! Component: 3050 - total flux cleaned = -0.00240962 Jy ! Component: 3100 - total flux cleaned = -0.00234074 Jy ! Component: 3150 - total flux cleaned = -0.00228623 Jy ! Component: 3200 - total flux cleaned = -0.00235405 Jy ! Component: 3250 - total flux cleaned = -0.00234063 Jy ! Component: 3300 - total flux cleaned = -0.00236726 Jy ! Component: 3350 - total flux cleaned = -0.00231428 Jy ! Component: 3400 - total flux cleaned = -0.00230103 Jy ! Component: 3450 - total flux cleaned = -0.00230106 Jy ! Component: 3500 - total flux cleaned = -0.0022622 Jy ! Component: 3550 - total flux cleaned = -0.00227517 Jy ! Component: 3600 - total flux cleaned = -0.00228811 Jy ! Component: 3650 - total flux cleaned = -0.00226253 Jy ! Component: 3700 - total flux cleaned = -0.00226262 Jy ! Component: 3750 - total flux cleaned = -0.00233807 Jy ! Component: 3800 - total flux cleaned = -0.00233807 Jy ! Component: 3850 - total flux cleaned = -0.00232578 Jy ! Component: 3900 - total flux cleaned = -0.00235048 Jy ! Component: 3950 - total flux cleaned = -0.00227704 Jy ! Component: 4000 - total flux cleaned = -0.00236228 Jy ! Component: 4050 - total flux cleaned = -0.00239849 Jy ! Total flux subtracted in 4096 components = -0.00235051 Jy ! Clean residual min=-0.000707 max=0.000700 Jy/beam ! Clean residual mean=-0.000004 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.366758 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 585 components and 0.366758 Jy ![Exited script file: muppet] wmap "J1110+4817_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.278 x 5.053 at 2.863 degrees (North through East) ! Clean map min=-0.0013476 max=0.14486 Jy/beam ! Writing clean map to FITS file: J1110+4817_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144865 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000223697 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.463253 0.463253 0.926506 1.85301 3.70602 7.41205 14.8241 29.6482 59.2964 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.278 x 5.053 at 2.863 degrees (North through East) ! Clean map min=-0.0013476 max=0.14486 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1110+4817_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:25:39 2019