! Started logfile: J1105-2659_S_2017_10_21_pus_uvs.log on Sat May 11 20:56:59 2019 obs J1105-2659_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1105-2659_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.605784 visibilities/baseline/integration-bin. ! Found source: J1105-2659 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12736 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1105-2659_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 338 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 591 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 490 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 925 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000956Jy sigma=0.007444 ! Fit after self-cal, rms=0.941231Jy sigma=0.007022 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=13.78 mas, bpa=-23.55 degrees ! Estimated noise=1513.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500678 Jy ! Component: 100 - total flux cleaned = 0.0611465 Jy ! Total flux subtracted in 100 components = 0.0611465 Jy ! Clean residual min=-0.004940 max=0.005300 Jy/beam ! Clean residual mean=-0.000010 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.0611465 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0611465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100760Jy sigma=0.000680 ! Fit after self-cal, rms=0.099612Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=15.76 mas, bpa=-23.13 degrees ! Estimated noise=1053.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461956 Jy ! Component: 100 - total flux cleaned = 0.00680522 Jy ! Component: 150 - total flux cleaned = 0.00747908 Jy ! Component: 200 - total flux cleaned = 0.00761109 Jy ! Total flux subtracted in 200 components = 0.00761109 Jy ! Clean residual min=-0.003810 max=0.003339 Jy/beam ! Clean residual mean=-0.000017 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0687576 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0687576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099378Jy sigma=0.000670 ! Fit after self-cal, rms=0.099301Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.92 KP 1.17 ! LA 1.06 MK 0.97 NL 1.09 OV 1.01 ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.89 KP 1.15 ! LA 1.06 MK 1.05 NL 1.05 OV 1.14 ! PT 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.92 KP 1.13 ! LA 0.85 MK 1.03 NL 1.19 OV 1.02 ! PT 0.84 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.85 KP 1.00* ! LA 1.04 MK 1.07 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.099301Jy sigma=0.000670 ! Fit after self-cal, rms=0.096945Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=15.71 mas, bpa=-22.65 degrees ! Estimated noise=1056.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128008 Jy ! Component: 100 - total flux cleaned = 0.000223263 Jy ! Component: 150 - total flux cleaned = 0.00029395 Jy ! Component: 200 - total flux cleaned = 0.000308678 Jy ! Total flux subtracted in 200 components = 0.000308678 Jy ! Clean residual min=-0.002071 max=0.002770 Jy/beam ! Clean residual mean=-0.000002 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0690663 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.0690663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096930Jy sigma=0.000667 ! Fit after self-cal, rms=0.097121Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097121Jy sigma=0.000666 ! Fit after self-cal, rms=0.098599Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=15.69 mas, bpa=-22.58 degrees ! Estimated noise=1062.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402687 Jy ! Component: 100 - total flux cleaned = 0.000446412 Jy ! Component: 150 - total flux cleaned = 0.000491791 Jy ! Component: 200 - total flux cleaned = 0.000518373 Jy ! Total flux subtracted in 200 components = 0.000518373 Jy ! Clean residual min=-0.002158 max=0.002752 Jy/beam ! Clean residual mean=-0.000002 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0695846 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.0695847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098589Jy sigma=0.000666 ! Fit after self-cal, rms=0.098812Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026581 Jy ! Component: 100 - total flux cleaned = 0.000249989 Jy ! Component: 150 - total flux cleaned = 0.000221605 Jy ! Component: 200 - total flux cleaned = 0.000208709 Jy ! Total flux subtracted in 200 components = 0.000208709 Jy ! Clean residual min=-0.002059 max=0.002512 Jy/beam ! Clean residual mean=-0.000006 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0697934 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.0697934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098805Jy sigma=0.000666 ! Fit after self-cal, rms=0.098814Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098814Jy sigma=0.000666 ! Fit after self-cal, rms=0.099368Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=15.58 mas, bpa=-22.55 degrees ! Estimated noise=1066.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364465 Jy ! Component: 100 - total flux cleaned = 0.000420857 Jy ! Component: 150 - total flux cleaned = 0.000464658 Jy ! Component: 200 - total flux cleaned = 0.000488534 Jy ! Total flux subtracted in 200 components = 0.000488534 Jy ! Clean residual min=-0.002111 max=0.002768 Jy/beam ! Clean residual mean=-0.000004 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0702819 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.0702819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099358Jy sigma=0.000665 ! Fit after self-cal, rms=0.099581Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (76, -52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192857 Jy ! Component: 100 - total flux cleaned = 0.00193153 Jy ! Component: 150 - total flux cleaned = 0.00202643 Jy ! Component: 200 - total flux cleaned = 0.00198639 Jy ! Total flux subtracted in 200 components = 0.00198639 Jy ! Clean residual min=-0.002048 max=0.002069 Jy/beam ! Clean residual mean=-0.000004 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0722683 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.0722683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099489Jy sigma=0.000664 ! Fit after self-cal, rms=0.099455Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099455Jy sigma=0.000664 ! Fit after self-cal, rms=0.099682Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.796 mas, bmaj=27.48 mas, bpa=-11.01 degrees ! Estimated noise=1306.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159286 Jy ! Component: 100 - total flux cleaned = 0.00195204 Jy ! Component: 150 - total flux cleaned = 0.00218036 Jy ! Component: 200 - total flux cleaned = 0.00218137 Jy ! Total flux subtracted in 200 components = 0.00218137 Jy ! Clean residual min=-0.001731 max=0.001948 Jy/beam ! Clean residual mean=-0.000005 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0744497 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.0744497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099640Jy sigma=0.000663 ! Fit after self-cal, rms=0.099731Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737021 Jy ! Component: 100 - total flux cleaned = 0.000765356 Jy ! Component: 150 - total flux cleaned = 0.000767024 Jy ! Component: 200 - total flux cleaned = 0.000744544 Jy ! Total flux subtracted in 200 components = 0.000744544 Jy ! Clean residual min=-0.001688 max=0.001909 Jy/beam ! Clean residual mean=-0.000006 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0751942 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 120 components and 0.0751942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099712Jy sigma=0.000663 ! Fit after self-cal, rms=0.099709Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=15.5 mas, bpa=-22.55 degrees ! Estimated noise=1065.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.178 x 15.5 at -22.55 degrees (North through East) ! Clean map min=-0.0021053 max=0.060828 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=13.47 mas, bpa=-23.13 degrees ! Estimated noise=1515.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0502691 Jy ! Component: 100 - total flux cleaned = 0.0615999 Jy ! Component: 150 - total flux cleaned = 0.0668938 Jy ! Component: 200 - total flux cleaned = 0.0707798 Jy ! Total flux subtracted in 200 components = 0.0707798 Jy ! Clean residual min=-0.003616 max=0.003351 Jy/beam ! Clean residual mean=0.000003 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.0707798 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0707798 Jy ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=15.5 mas, bpa=-22.55 degrees ! Estimated noise=1065.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227746 Jy ! Component: 100 - total flux cleaned = 0.00293756 Jy ! Component: 150 - total flux cleaned = 0.00358672 Jy ! Component: 200 - total flux cleaned = 0.00370635 Jy ! Total flux subtracted in 200 components = 0.00370635 Jy ! Clean residual min=-0.002055 max=0.001990 Jy/beam ! Clean residual mean=-0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0744862 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.0744862 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.796 mas, bmaj=27.48 mas, bpa=-11.01 degrees ! Estimated noise=1306.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558886 Jy ! Component: 100 - total flux cleaned = 0.000683699 Jy ! Component: 150 - total flux cleaned = 0.000718863 Jy ! Component: 200 - total flux cleaned = 0.000717904 Jy ! Total flux subtracted in 200 components = 0.000717904 Jy ! Clean residual min=-0.001783 max=0.001941 Jy/beam ! Clean residual mean=-0.000008 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0752041 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.0521e-05 Jy ! Component: 100 - total flux cleaned = -5.76869e-05 Jy ! Component: 150 - total flux cleaned = -8.37589e-05 Jy ! Component: 200 - total flux cleaned = -0.000108881 Jy ! Total flux subtracted in 200 components = -0.000108881 Jy ! Clean residual min=-0.001713 max=0.001957 Jy/beam ! Clean residual mean=-0.000007 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0750952 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 85 components and 0.0750952 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=15.5 mas, bpa=-22.55 degrees ! Estimated noise=1065.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.03669e-05 Jy ! Component: 100 - total flux cleaned = -0.000195442 Jy ! Component: 150 - total flux cleaned = -0.000166216 Jy ! Component: 200 - total flux cleaned = -0.000166081 Jy ! Total flux subtracted in 200 components = -0.000166081 Jy ! Clean residual min=-0.001983 max=0.001900 Jy/beam ! Clean residual mean=-0.000003 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0749291 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 0.0749291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099685Jy sigma=0.000663 ! Fit after self-cal, rms=0.099699Jy sigma=0.000663 wmodel J1105-2659_S_2017_10_21_pus_map.mod ! Writing 110 model components to file: J1105-2659_S_2017_10_21_pus_map.mod wobs J1105-2659_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1105-2659_S_2017_10_21_pus_uvs.fits wwins J1105-2659_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1105-2659_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.3859e-05 Jy ! Component: 100 - total flux cleaned = 0.000187792 Jy ! Component: 150 - total flux cleaned = 0.000249291 Jy ! Component: 200 - total flux cleaned = 0.000278419 Jy ! Component: 250 - total flux cleaned = 0.00033454 Jy ! Component: 300 - total flux cleaned = 0.000280716 Jy ! Component: 350 - total flux cleaned = 0.000149858 Jy ! Component: 400 - total flux cleaned = 9.91566e-05 Jy ! Component: 450 - total flux cleaned = 4.90228e-05 Jy ! Component: 500 - total flux cleaned = -4.83502e-05 Jy ! Component: 550 - total flux cleaned = -0.00016658 Jy ! Component: 600 - total flux cleaned = -0.000212792 Jy ! Component: 650 - total flux cleaned = -0.000280946 Jy ! Component: 700 - total flux cleaned = -0.000368837 Jy ! Component: 750 - total flux cleaned = -0.000324832 Jy ! Component: 800 - total flux cleaned = -0.000281923 Jy ! Component: 850 - total flux cleaned = -0.000323514 Jy ! Component: 900 - total flux cleaned = -0.00030287 Jy ! Component: 950 - total flux cleaned = -0.000363889 Jy ! Component: 1000 - total flux cleaned = -0.000403422 Jy ! Component: 1050 - total flux cleaned = -0.000344675 Jy ! Component: 1100 - total flux cleaned = -0.000325234 Jy ! Component: 1150 - total flux cleaned = -0.00036352 Jy ! Component: 1200 - total flux cleaned = -0.000325902 Jy ! Component: 1250 - total flux cleaned = -0.000251685 Jy ! Component: 1300 - total flux cleaned = -0.000288327 Jy ! Component: 1350 - total flux cleaned = -0.000179738 Jy ! Component: 1400 - total flux cleaned = -0.000162039 Jy ! Component: 1450 - total flux cleaned = -0.000126568 Jy ! Component: 1500 - total flux cleaned = -3.93521e-05 Jy ! Component: 1550 - total flux cleaned = 1.24434e-05 Jy ! Component: 1600 - total flux cleaned = 0.000114473 Jy ! Component: 1650 - total flux cleaned = 0.000181654 Jy ! Component: 1700 - total flux cleaned = 0.000347605 Jy ! Component: 1750 - total flux cleaned = 0.000413227 Jy ! Component: 1800 - total flux cleaned = 0.0004294 Jy ! Component: 1850 - total flux cleaned = 0.000621844 Jy ! Component: 1900 - total flux cleaned = 0.000700979 Jy ! Component: 1950 - total flux cleaned = 0.00079533 Jy ! Component: 2000 - total flux cleaned = 0.000872892 Jy ! Component: 2050 - total flux cleaned = 0.00101131 Jy ! Component: 2100 - total flux cleaned = 0.00107216 Jy ! Component: 2150 - total flux cleaned = 0.00120794 Jy ! Component: 2200 - total flux cleaned = 0.00126762 Jy ! Component: 2250 - total flux cleaned = 0.001371 Jy ! Component: 2300 - total flux cleaned = 0.00140034 Jy ! Component: 2350 - total flux cleaned = 0.00145828 Jy ! Component: 2400 - total flux cleaned = 0.00150152 Jy ! Component: 2450 - total flux cleaned = 0.001587 Jy ! Component: 2500 - total flux cleaned = 0.00161514 Jy ! Component: 2550 - total flux cleaned = 0.00168505 Jy ! Component: 2600 - total flux cleaned = 0.0016992 Jy ! Component: 2650 - total flux cleaned = 0.00175424 Jy ! Component: 2700 - total flux cleaned = 0.00174056 Jy ! Component: 2750 - total flux cleaned = 0.00178134 Jy ! Component: 2800 - total flux cleaned = 0.00179498 Jy ! Component: 2850 - total flux cleaned = 0.00179499 Jy ! Component: 2900 - total flux cleaned = 0.00183473 Jy ! Component: 2950 - total flux cleaned = 0.00182144 Jy ! Component: 3000 - total flux cleaned = 0.00182134 Jy ! Component: 3050 - total flux cleaned = 0.00184726 Jy ! Component: 3100 - total flux cleaned = 0.00186014 Jy ! Component: 3150 - total flux cleaned = 0.00191117 Jy ! Component: 3200 - total flux cleaned = 0.0018857 Jy ! Component: 3250 - total flux cleaned = 0.00191098 Jy ! Component: 3300 - total flux cleaned = 0.00189846 Jy ! Component: 3350 - total flux cleaned = 0.00196052 Jy ! Component: 3400 - total flux cleaned = 0.00200962 Jy ! Component: 3450 - total flux cleaned = 0.0020094 Jy ! Component: 3500 - total flux cleaned = 0.00199729 Jy ! Component: 3550 - total flux cleaned = 0.00198522 Jy ! Component: 3600 - total flux cleaned = 0.00202109 Jy ! Component: 3650 - total flux cleaned = 0.00200912 Jy ! Component: 3700 - total flux cleaned = 0.00203279 Jy ! Component: 3750 - total flux cleaned = 0.00203275 Jy ! Component: 3800 - total flux cleaned = 0.00203263 Jy ! Component: 3850 - total flux cleaned = 0.00203256 Jy ! Component: 3900 - total flux cleaned = 0.00197474 Jy ! Component: 3950 - total flux cleaned = 0.00203224 Jy ! Component: 4000 - total flux cleaned = 0.00203208 Jy ! Component: 4050 - total flux cleaned = 0.00199794 Jy ! Total flux subtracted in 4096 components = 0.00200927 Jy ! Clean residual min=-0.000751 max=0.000641 Jy/beam ! Clean residual mean=-0.000002 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.0769383 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 352 components and 0.0769383 Jy ![Exited script file: muppet] wmap "J1105-2659_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.178 x 15.5 at -22.55 degrees (North through East) ! Clean map min=-0.0022665 max=0.061421 Jy/beam ! Writing clean map to FITS file: J1105-2659_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0614215 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206796 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01005 1.01005 2.0201 4.04021 8.08042 16.1608 32.3217 64.6434 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.178 x 15.5 at -22.55 degrees (North through East) ! Clean map min=-0.0022665 max=0.061421 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1105-2659_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:57:04 2019