! Started logfile: J1105-2659_S_2017_01_21_pus_uvs.log on Sun May 5 15:53:11 2019 obs J1105-2659_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1105-2659_S_2017_01_21_pus_uva.fits ! AN table 1: 94 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.760934 visibilities/baseline/integration-bin. ! Found source: J1105-2659 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 10300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1105-2659_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009382Jy sigma=0.005967 ! Fit after self-cal, rms=0.940556Jy sigma=0.005580 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.287 mas, bmaj=6.311 mas, bpa=-5.493 degrees ! Estimated noise=2336.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0532206 Jy ! Component: 100 - total flux cleaned = 0.0662702 Jy ! Total flux subtracted in 100 components = 0.0662702 Jy ! Clean residual min=-0.008022 max=0.007895 Jy/beam ! Clean residual mean=0.000002 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 0.0662702 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0662702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121586Jy sigma=0.000632 ! Fit after self-cal, rms=0.119854Jy sigma=0.000621 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=7.103 mas, bpa=-4.644 degrees ! Estimated noise=1296.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334065 Jy ! Component: 100 - total flux cleaned = 0.0035062 Jy ! Component: 150 - total flux cleaned = 0.00335109 Jy ! Component: 200 - total flux cleaned = 0.00321203 Jy ! Total flux subtracted in 200 components = 0.00321203 Jy ! Clean residual min=-0.004175 max=0.003815 Jy/beam ! Clean residual mean=0.000011 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.0694822 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.0694822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119684Jy sigma=0.000621 ! Fit after self-cal, rms=0.119628Jy sigma=0.000621 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.89 LA 1.06 ! MK 0.96 NL 1.08 OV 1.01 PT 1.27 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* HN 0.94 LA 1.01 ! MK 1.01 NL 1.09 OV 1.16 PT 1.02 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.97 LA 0.97 ! MK 1.05 NL 0.95 OV 1.01 PT 1.13 ! SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 1.00* HN 0.66 LA 0.97 ! MK 0.94 NL 1.00* OV 0.89 PT 1.09 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.119628Jy sigma=0.000621 ! Fit after self-cal, rms=0.112881Jy sigma=0.000618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.684 mas, bmaj=7.121 mas, bpa=-5.246 degrees ! Estimated noise=1294.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263319 Jy ! Component: 100 - total flux cleaned = 0.000305287 Jy ! Component: 150 - total flux cleaned = 0.00034238 Jy ! Component: 200 - total flux cleaned = 0.000358695 Jy ! Total flux subtracted in 200 components = 0.000358695 Jy ! Clean residual min=-0.003278 max=0.003619 Jy/beam ! Clean residual mean=-0.000023 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0698409 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0698409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112873Jy sigma=0.000618 ! Fit after self-cal, rms=0.112564Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112564Jy sigma=0.000617 ! Fit after self-cal, rms=0.111510Jy sigma=0.000616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=7.106 mas, bpa=-5.278 degrees ! Estimated noise=1296.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658222 Jy ! Component: 100 - total flux cleaned = 0.000695305 Jy ! Component: 150 - total flux cleaned = 0.000729711 Jy ! Component: 200 - total flux cleaned = 0.000729669 Jy ! Total flux subtracted in 200 components = 0.000729669 Jy ! Clean residual min=-0.003336 max=0.003536 Jy/beam ! Clean residual mean=-0.000021 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.0705706 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.0705706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111502Jy sigma=0.000616 ! Fit after self-cal, rms=0.111464Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48.5, 78). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263205 Jy ! Component: 100 - total flux cleaned = 0.002875 Jy ! Component: 150 - total flux cleaned = 0.00287544 Jy ! Component: 200 - total flux cleaned = 0.00283911 Jy ! Total flux subtracted in 200 components = 0.00283911 Jy ! Clean residual min=-0.003308 max=0.002625 Jy/beam ! Clean residual mean=-0.000012 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.0734097 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 41 components and 0.0734097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111387Jy sigma=0.000615 ! Fit after self-cal, rms=0.111335Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111335Jy sigma=0.000615 ! Fit after self-cal, rms=0.110794Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=7.093 mas, bpa=-5.251 degrees ! Estimated noise=1289.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014806 Jy ! Component: 100 - total flux cleaned = 0.00136259 Jy ! Component: 150 - total flux cleaned = 0.00129121 Jy ! Component: 200 - total flux cleaned = 0.00125894 Jy ! Total flux subtracted in 200 components = 0.00125894 Jy ! Clean residual min=-0.003038 max=0.002768 Jy/beam ! Clean residual mean=-0.000014 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0746687 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.0746687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110758Jy sigma=0.000614 ! Fit after self-cal, rms=0.110752Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927845 Jy ! Component: 100 - total flux cleaned = 0.00085362 Jy ! Component: 150 - total flux cleaned = 0.000753774 Jy ! Component: 200 - total flux cleaned = 0.000631797 Jy ! Total flux subtracted in 200 components = 0.000631797 Jy ! Clean residual min=-0.003193 max=0.002735 Jy/beam ! Clean residual mean=-0.000011 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0753005 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.0753005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110726Jy sigma=0.000614 ! Fit after self-cal, rms=0.110686Jy sigma=0.000613 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110686Jy sigma=0.000613 ! Fit after self-cal, rms=0.110807Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.576 mas, bmaj=16.6 mas, bpa=3.33 degrees ! Estimated noise=1825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767834 Jy ! Component: 100 - total flux cleaned = 0.000974876 Jy ! Component: 150 - total flux cleaned = 0.00114307 Jy ! Component: 200 - total flux cleaned = 0.0012943 Jy ! Total flux subtracted in 200 components = 0.0012943 Jy ! Clean residual min=-0.004388 max=0.002699 Jy/beam ! Clean residual mean=-0.000048 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0765948 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.0765948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110804Jy sigma=0.000613 ! Fit after self-cal, rms=0.110837Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001507 Jy ! Component: 100 - total flux cleaned = 0.000314382 Jy ! Component: 150 - total flux cleaned = 0.000446278 Jy ! Component: 200 - total flux cleaned = 0.000463064 Jy ! Total flux subtracted in 200 components = 0.000463064 Jy ! Clean residual min=-0.004265 max=0.002745 Jy/beam ! Clean residual mean=-0.000048 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0770578 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.0770578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110836Jy sigma=0.000613 ! Fit after self-cal, rms=0.110833Jy sigma=0.000613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=7.096 mas, bpa=-5.297 degrees ! Estimated noise=1286.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.666 x 7.096 at -5.297 degrees (North through East) ! Clean map min=-0.0030184 max=0.067711 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.268 mas, bmaj=6.392 mas, bpa=-6.334 degrees ! Estimated noise=2213.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535645 Jy ! Component: 100 - total flux cleaned = 0.0669463 Jy ! Component: 150 - total flux cleaned = 0.071769 Jy ! Component: 200 - total flux cleaned = 0.0747525 Jy ! Total flux subtracted in 200 components = 0.0747525 Jy ! Clean residual min=-0.006359 max=0.006455 Jy/beam ! Clean residual mean=-0.000011 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.0747525 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0747525 Jy ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=7.096 mas, bpa=-5.297 degrees ! Estimated noise=1286.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192274 Jy ! Component: 100 - total flux cleaned = 0.00226763 Jy ! Component: 150 - total flux cleaned = 0.00241012 Jy ! Component: 200 - total flux cleaned = 0.00235357 Jy ! Total flux subtracted in 200 components = 0.00235357 Jy ! Clean residual min=-0.003247 max=0.002974 Jy/beam ! Clean residual mean=-0.000016 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0771061 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.0771061 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.576 mas, bmaj=16.6 mas, bpa=3.33 degrees ! Estimated noise=1825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000173171 Jy ! Component: 100 - total flux cleaned = 2.11909e-06 Jy ! Component: 150 - total flux cleaned = 9.24178e-05 Jy ! Component: 200 - total flux cleaned = 0.000118954 Jy ! Total flux subtracted in 200 components = 0.000118954 Jy ! Clean residual min=-0.004294 max=0.002818 Jy/beam ! Clean residual mean=-0.000047 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.077225 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.52069e-05 Jy ! Component: 100 - total flux cleaned = 4.4658e-05 Jy ! Component: 150 - total flux cleaned = 8.13558e-05 Jy ! Component: 200 - total flux cleaned = 9.8146e-05 Jy ! Total flux subtracted in 200 components = 9.8146e-05 Jy ! Clean residual min=-0.004204 max=0.002732 Jy/beam ! Clean residual mean=-0.000047 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.0773232 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 71 components and 0.0773232 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=7.096 mas, bpa=-5.297 degrees ! Estimated noise=1286.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100964 Jy ! Component: 100 - total flux cleaned = 0.000101289 Jy ! Component: 150 - total flux cleaned = 0.000100694 Jy ! Component: 200 - total flux cleaned = 6.33773e-05 Jy ! Total flux subtracted in 200 components = 6.33773e-05 Jy ! Clean residual min=-0.003223 max=0.002904 Jy/beam ! Clean residual mean=-0.000017 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0773866 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.0773866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110838Jy sigma=0.000613 ! Fit after self-cal, rms=0.110841Jy sigma=0.000613 wmodel J1105-2659_S_2017_01_21_pus_map.mod ! Writing 89 model components to file: J1105-2659_S_2017_01_21_pus_map.mod wobs J1105-2659_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1105-2659_S_2017_01_21_pus_uvs.fits wwins J1105-2659_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1105-2659_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116698 Jy ! Component: 100 - total flux cleaned = -0.00163033 Jy ! Component: 150 - total flux cleaned = -0.00177269 Jy ! Component: 200 - total flux cleaned = -0.00186221 Jy ! Component: 250 - total flux cleaned = -0.001819 Jy ! Component: 300 - total flux cleaned = -0.00181795 Jy ! Component: 350 - total flux cleaned = -0.00181707 Jy ! Component: 400 - total flux cleaned = -0.00189297 Jy ! Component: 450 - total flux cleaned = -0.00189294 Jy ! Component: 500 - total flux cleaned = -0.00196527 Jy ! Component: 550 - total flux cleaned = -0.00196568 Jy ! Component: 600 - total flux cleaned = -0.00196618 Jy ! Component: 650 - total flux cleaned = -0.00199928 Jy ! Component: 700 - total flux cleaned = -0.00199902 Jy ! Component: 750 - total flux cleaned = -0.00209356 Jy ! Component: 800 - total flux cleaned = -0.00206259 Jy ! Component: 850 - total flux cleaned = -0.00209278 Jy ! Component: 900 - total flux cleaned = -0.00209307 Jy ! Component: 950 - total flux cleaned = -0.00212203 Jy ! Component: 1000 - total flux cleaned = -0.0020924 Jy ! Component: 1050 - total flux cleaned = -0.00206449 Jy ! Component: 1100 - total flux cleaned = -0.00203752 Jy ! Component: 1150 - total flux cleaned = -0.00206471 Jy ! Component: 1200 - total flux cleaned = -0.00206436 Jy ! Component: 1250 - total flux cleaned = -0.00211592 Jy ! Component: 1300 - total flux cleaned = -0.0021925 Jy ! Component: 1350 - total flux cleaned = -0.00216666 Jy ! Component: 1400 - total flux cleaned = -0.00226571 Jy ! Component: 1450 - total flux cleaned = -0.00231436 Jy ! Component: 1500 - total flux cleaned = -0.00243418 Jy ! Component: 1550 - total flux cleaned = -0.00245706 Jy ! Component: 1600 - total flux cleaned = -0.00250368 Jy ! Component: 1650 - total flux cleaned = -0.00257252 Jy ! Component: 1700 - total flux cleaned = -0.0026175 Jy ! Component: 1750 - total flux cleaned = -0.00266205 Jy ! Component: 1800 - total flux cleaned = -0.0026619 Jy ! Component: 1850 - total flux cleaned = -0.00270518 Jy ! Component: 1900 - total flux cleaned = -0.00268334 Jy ! Component: 1950 - total flux cleaned = -0.00270425 Jy ! Component: 2000 - total flux cleaned = -0.00264178 Jy ! Component: 2050 - total flux cleaned = -0.00260153 Jy ! Component: 2100 - total flux cleaned = -0.00266235 Jy ! Component: 2150 - total flux cleaned = -0.00266249 Jy ! Component: 2200 - total flux cleaned = -0.00268194 Jy ! Component: 2250 - total flux cleaned = -0.00264319 Jy ! Component: 2300 - total flux cleaned = -0.00254727 Jy ! Component: 2350 - total flux cleaned = -0.0025289 Jy ! Component: 2400 - total flux cleaned = -0.00252924 Jy ! Component: 2450 - total flux cleaned = -0.00252912 Jy ! Component: 2500 - total flux cleaned = -0.00243765 Jy ! Component: 2550 - total flux cleaned = -0.00240146 Jy ! Component: 2600 - total flux cleaned = -0.00234793 Jy ! Component: 2650 - total flux cleaned = -0.00231313 Jy ! Component: 2700 - total flux cleaned = -0.00229556 Jy ! Component: 2750 - total flux cleaned = -0.0022784 Jy ! Component: 2800 - total flux cleaned = -0.00221032 Jy ! Component: 2850 - total flux cleaned = -0.0021939 Jy ! Component: 2900 - total flux cleaned = -0.00217745 Jy ! Component: 2950 - total flux cleaned = -0.00211171 Jy ! Component: 3000 - total flux cleaned = -0.00206294 Jy ! Component: 3050 - total flux cleaned = -0.00203072 Jy ! Component: 3100 - total flux cleaned = -0.00198318 Jy ! Component: 3150 - total flux cleaned = -0.00199908 Jy ! Component: 3200 - total flux cleaned = -0.00196781 Jy ! Component: 3250 - total flux cleaned = -0.00193681 Jy ! Component: 3300 - total flux cleaned = -0.00190625 Jy ! Component: 3350 - total flux cleaned = -0.00187597 Jy ! Component: 3400 - total flux cleaned = -0.00187599 Jy ! Component: 3450 - total flux cleaned = -0.0018461 Jy ! Component: 3500 - total flux cleaned = -0.00180196 Jy ! Component: 3550 - total flux cleaned = -0.00180179 Jy ! Component: 3600 - total flux cleaned = -0.00177268 Jy ! Component: 3650 - total flux cleaned = -0.00178696 Jy ! Component: 3700 - total flux cleaned = -0.00177256 Jy ! Component: 3750 - total flux cleaned = -0.00170204 Jy ! Component: 3800 - total flux cleaned = -0.00166015 Jy ! Component: 3850 - total flux cleaned = -0.00161884 Jy ! Component: 3900 - total flux cleaned = -0.00166016 Jy ! Component: 3950 - total flux cleaned = -0.00160557 Jy ! Component: 4000 - total flux cleaned = -0.00160572 Jy ! Component: 4050 - total flux cleaned = -0.00156547 Jy ! Total flux subtracted in 4096 components = -0.00151223 Jy ! Clean residual min=-0.000793 max=0.000703 Jy/beam ! Clean residual mean=-0.000004 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0758744 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 355 components and 0.0758744 Jy ![Exited script file: muppet] wmap "J1105-2659_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.666 x 7.096 at -5.297 degrees (North through East) ! Clean map min=-0.0017698 max=0.067507 Jy/beam ! Writing clean map to FITS file: J1105-2659_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0675075 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228347 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01476 1.01476 2.02953 4.05906 8.11811 16.2362 32.4725 64.9449 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.666 x 7.096 at -5.297 degrees (North through East) ! Clean map min=-0.0017698 max=0.067507 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1105-2659_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:53:15 2019