! Started logfile: J1104+7932_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:39:09 2019 obs J1104+7932_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1104+7932_S_2017_03_27_pus_uva.fits ! AN table 1: 229 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88491 visibilities/baseline/integration-bin. ! Found source: J1104+7932 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 36476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1104+7932_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 832 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.750197Jy sigma=0.006165 ! Fit after self-cal, rms=0.711385Jy sigma=0.005822 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=4.509 mas, bpa=76.06 degrees ! Estimated noise=837.139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.221039 Jy ! Component: 100 - total flux cleaned = 0.312215 Jy ! Total flux subtracted in 100 components = 0.312215 Jy ! Clean residual min=-0.013737 max=0.053010 Jy/beam ! Clean residual mean=-0.000047 rms=0.004364 Jy/beam ! Combined flux in latest and established models = 0.312215 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.312215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148129Jy sigma=0.001199 ! Fit after self-cal, rms=0.147050Jy sigma=0.001191 ! Inverting map ! Added new window around map position (-6, -2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557396 Jy ! Component: 100 - total flux cleaned = 0.0891171 Jy ! Total flux subtracted in 100 components = 0.0891171 Jy ! Clean residual min=-0.009504 max=0.023233 Jy/beam ! Clean residual mean=-0.000030 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.401333 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 0.401332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117024Jy sigma=0.000896 ! Fit after self-cal, rms=0.115807Jy sigma=0.000885 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251112 Jy ! Component: 100 - total flux cleaned = 0.0414511 Jy ! Total flux subtracted in 100 components = 0.0414511 Jy ! Clean residual min=-0.006658 max=0.011837 Jy/beam ! Clean residual mean=-0.000022 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 0.442784 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.442784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108429Jy sigma=0.000805 ! Fit after self-cal, rms=0.108170Jy sigma=0.000803 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129468 Jy ! Component: 100 - total flux cleaned = 0.021694 Jy ! Total flux subtracted in 100 components = 0.021694 Jy ! Clean residual min=-0.006036 max=0.006640 Jy/beam ! Clean residual mean=-0.000018 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.464478 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.464478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106131Jy sigma=0.000779 ! Fit after self-cal, rms=0.106073Jy sigma=0.000778 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=5.356 mas, bpa=75.96 degrees ! Estimated noise=485.769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103328 Jy ! Component: 100 - total flux cleaned = 0.0163331 Jy ! Component: 150 - total flux cleaned = 0.0201579 Jy ! Component: 200 - total flux cleaned = 0.0226745 Jy ! Total flux subtracted in 200 components = 0.0226745 Jy ! Clean residual min=-0.005248 max=0.006585 Jy/beam ! Clean residual mean=-0.000031 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.487152 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.487152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105274Jy sigma=0.000767 ! Fit after self-cal, rms=0.105235Jy sigma=0.000766 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.98 KP 1.00 ! LA 0.97 MK 1.03 NL 0.95 OV 1.01 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.02 KP 0.97 ! LA 0.94 MK 1.03 NL 0.99 OV 1.04 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.01 KP 0.96 ! LA 0.99 MK 1.07 NL 0.96 OV 0.96 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.08 HN 1.02 KP 1.00* ! LA 1.05 MK 0.99 NL 1.00* OV 3.17 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.105235Jy sigma=0.000766 ! Fit after self-cal, rms=0.117463Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=5.364 mas, bpa=75.65 degrees ! Estimated noise=487.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137021 Jy ! Component: 100 - total flux cleaned = 0.00160273 Jy ! Component: 150 - total flux cleaned = 0.00167816 Jy ! Component: 200 - total flux cleaned = 0.00171307 Jy ! Total flux subtracted in 200 components = 0.00171307 Jy ! Clean residual min=-0.002360 max=0.002711 Jy/beam ! Clean residual mean=0.000013 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.488865 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.488865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117430Jy sigma=0.000680 ! Fit after self-cal, rms=0.117872Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117872Jy sigma=0.000680 ! Fit after self-cal, rms=0.119258Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.761 mas, bmaj=5.353 mas, bpa=75.65 degrees ! Estimated noise=486.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648114 Jy ! Component: 100 - total flux cleaned = 0.000581296 Jy ! Component: 150 - total flux cleaned = 0.000610596 Jy ! Component: 200 - total flux cleaned = 0.000610035 Jy ! Total flux subtracted in 200 components = 0.000610035 Jy ! Clean residual min=-0.001482 max=0.001402 Jy/beam ! Clean residual mean=0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.489475 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 92 components and 0.489475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119244Jy sigma=0.000664 ! Fit after self-cal, rms=0.119276Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.04544e-06 Jy ! Component: 100 - total flux cleaned = -3.73409e-06 Jy ! Component: 150 - total flux cleaned = -3.64726e-06 Jy ! Component: 200 - total flux cleaned = -2.49387e-05 Jy ! Total flux subtracted in 200 components = -2.49387e-05 Jy ! Clean residual min=-0.001473 max=0.001379 Jy/beam ! Clean residual mean=0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.48945 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 94 components and 0.48945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119270Jy sigma=0.000663 ! Fit after self-cal, rms=0.119266Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119266Jy sigma=0.000663 ! Fit after self-cal, rms=0.119251Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=5.353 mas, bpa=75.79 degrees ! Estimated noise=486.126 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282786 Jy ! Component: 100 - total flux cleaned = 0.000305659 Jy ! Component: 150 - total flux cleaned = 0.000327199 Jy ! Component: 200 - total flux cleaned = 0.000347308 Jy ! Total flux subtracted in 200 components = 0.000347308 Jy ! Clean residual min=-0.001447 max=0.001284 Jy/beam ! Clean residual mean=0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.489797 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.489798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119244Jy sigma=0.000663 ! Fit after self-cal, rms=0.119244Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.36546e-06 Jy ! Component: 100 - total flux cleaned = 3.33133e-05 Jy ! Component: 150 - total flux cleaned = 3.29844e-05 Jy ! Component: 200 - total flux cleaned = 3.28889e-05 Jy ! Total flux subtracted in 200 components = 3.28889e-05 Jy ! Clean residual min=-0.001443 max=0.001249 Jy/beam ! Clean residual mean=0.000001 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.48983 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 0.48983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119240Jy sigma=0.000663 ! Fit after self-cal, rms=0.119239Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119239Jy sigma=0.000663 ! Fit after self-cal, rms=0.119239Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.12 mas, bmaj=9.72 mas, bpa=78.96 degrees ! Estimated noise=602.585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235381 Jy ! Component: 100 - total flux cleaned = 0.000274266 Jy ! Component: 150 - total flux cleaned = 0.000304698 Jy ! Component: 200 - total flux cleaned = 0.000329002 Jy ! Total flux subtracted in 200 components = 0.000329002 Jy ! Clean residual min=-0.001373 max=0.001359 Jy/beam ! Clean residual mean=0.000003 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.490159 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 102 components and 0.490159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119238Jy sigma=0.000663 ! Fit after self-cal, rms=0.119238Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.89527e-05 Jy ! Component: 100 - total flux cleaned = -1.01859e-05 Jy ! Component: 150 - total flux cleaned = 5.34886e-06 Jy ! Component: 200 - total flux cleaned = 5.29113e-06 Jy ! Total flux subtracted in 200 components = 5.29113e-06 Jy ! Clean residual min=-0.001370 max=0.001353 Jy/beam ! Clean residual mean=0.000003 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.490165 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.490165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119239Jy sigma=0.000663 ! Fit after self-cal, rms=0.119238Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=5.354 mas, bpa=75.92 degrees ! Estimated noise=485.909 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 5.354 at 75.92 degrees (North through East) ! Clean map min=-0.0014225 max=0.28462 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=4.509 mas, bpa=76.17 degrees ! Estimated noise=839.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222535 Jy ! Component: 100 - total flux cleaned = 0.320753 Jy ! Component: 150 - total flux cleaned = 0.376361 Jy ! Component: 200 - total flux cleaned = 0.410033 Jy ! Total flux subtracted in 200 components = 0.410033 Jy ! Clean residual min=-0.005652 max=0.017889 Jy/beam ! Clean residual mean=-0.000018 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.410033 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.410033 Jy ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=5.354 mas, bpa=75.92 degrees ! Estimated noise=485.909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0306772 Jy ! Component: 100 - total flux cleaned = 0.0485988 Jy ! Component: 150 - total flux cleaned = 0.0597544 Jy ! Component: 200 - total flux cleaned = 0.0668561 Jy ! Total flux subtracted in 200 components = 0.0668561 Jy ! Clean residual min=-0.001797 max=0.004496 Jy/beam ! Clean residual mean=-0.000010 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.476889 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 72 components and 0.476889 Jy ! Inverting map ! Added new window around map position (1, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485998 Jy ! Component: 100 - total flux cleaned = 0.0080401 Jy ! Component: 150 - total flux cleaned = 0.0101861 Jy ! Component: 200 - total flux cleaned = 0.0115006 Jy ! Total flux subtracted in 200 components = 0.0115006 Jy ! Clean residual min=-0.001373 max=0.001380 Jy/beam ! Clean residual mean=0.000000 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.48839 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.48839 Jy ! Inverting map ! Added new window around map position (-18.5, -24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492555 Jy ! Component: 100 - total flux cleaned = 0.000878423 Jy ! Component: 150 - total flux cleaned = 0.00117663 Jy ! Component: 200 - total flux cleaned = 0.00144092 Jy ! Total flux subtracted in 200 components = 0.00144092 Jy ! Clean residual min=-0.001324 max=0.001128 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.489831 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 104 components and 0.489831 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.12 mas, bmaj=9.72 mas, bpa=78.96 degrees ! Estimated noise=602.585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589798 Jy ! Component: 100 - total flux cleaned = 0.000825709 Jy ! Component: 150 - total flux cleaned = 0.000883557 Jy ! Component: 200 - total flux cleaned = 0.000904395 Jy ! Total flux subtracted in 200 components = 0.000904395 Jy ! Clean residual min=-0.001293 max=0.001256 Jy/beam ! Clean residual mean=0.000004 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.490735 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.9197e-05 Jy ! Component: 100 - total flux cleaned = 3.72424e-05 Jy ! Component: 150 - total flux cleaned = 6.25015e-05 Jy ! Component: 200 - total flux cleaned = 7.83554e-05 Jy ! Total flux subtracted in 200 components = 7.83554e-05 Jy ! Clean residual min=-0.001285 max=0.001256 Jy/beam ! Clean residual mean=0.000004 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.490813 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 0.490813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=5.354 mas, bpa=75.92 degrees ! Estimated noise=485.909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165516 Jy ! Component: 100 - total flux cleaned = -0.000218083 Jy ! Component: 150 - total flux cleaned = -0.000218173 Jy ! Component: 200 - total flux cleaned = -0.000241442 Jy ! Total flux subtracted in 200 components = -0.000241442 Jy ! Clean residual min=-0.001297 max=0.001133 Jy/beam ! Clean residual mean=0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.490572 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 142 components and 0.490572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119212Jy sigma=0.000663 ! Fit after self-cal, rms=0.119196Jy sigma=0.000663 wmodel J1104+7932_S_2017_03_27_pus_map.mod ! Writing 142 model components to file: J1104+7932_S_2017_03_27_pus_map.mod wobs J1104+7932_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1104+7932_S_2017_03_27_pus_uvs.fits wwins J1104+7932_S_2017_03_27_pus_map.win ! wwins: Wrote 4 windows to J1104+7932_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161967 Jy ! Component: 100 - total flux cleaned = -0.000182014 Jy ! Component: 150 - total flux cleaned = -0.000240604 Jy ! Component: 200 - total flux cleaned = -0.000240841 Jy ! Component: 250 - total flux cleaned = -0.0002041 Jy ! Component: 300 - total flux cleaned = -0.000204077 Jy ! Component: 350 - total flux cleaned = -0.000151463 Jy ! Component: 400 - total flux cleaned = -0.000134355 Jy ! Component: 450 - total flux cleaned = -0.000117573 Jy ! Component: 500 - total flux cleaned = -0.000134084 Jy ! Component: 550 - total flux cleaned = -0.000117559 Jy ! Component: 600 - total flux cleaned = -0.000198638 Jy ! Component: 650 - total flux cleaned = -0.000182565 Jy ! Component: 700 - total flux cleaned = -0.000230143 Jy ! Component: 750 - total flux cleaned = -0.000230063 Jy ! Component: 800 - total flux cleaned = -0.000292003 Jy ! Component: 850 - total flux cleaned = -0.000230793 Jy ! Component: 900 - total flux cleaned = -0.000261253 Jy ! Component: 950 - total flux cleaned = -0.000291399 Jy ! Component: 1000 - total flux cleaned = -0.000320988 Jy ! Component: 1050 - total flux cleaned = -0.000321029 Jy ! Component: 1100 - total flux cleaned = -0.00030653 Jy ! Component: 1150 - total flux cleaned = -0.000263368 Jy ! Component: 1200 - total flux cleaned = -0.000291821 Jy ! Component: 1250 - total flux cleaned = -0.000249252 Jy ! Component: 1300 - total flux cleaned = -0.000221441 Jy ! Component: 1350 - total flux cleaned = -0.000221623 Jy ! Component: 1400 - total flux cleaned = -0.0002356 Jy ! Component: 1450 - total flux cleaned = -0.000263088 Jy ! Component: 1500 - total flux cleaned = -0.00019535 Jy ! Component: 1550 - total flux cleaned = -0.000222286 Jy ! Component: 1600 - total flux cleaned = -0.000208793 Jy ! Component: 1650 - total flux cleaned = -0.00024866 Jy ! Component: 1700 - total flux cleaned = -0.000195892 Jy ! Component: 1750 - total flux cleaned = -0.000248213 Jy ! Component: 1800 - total flux cleaned = -0.000235148 Jy ! Component: 1850 - total flux cleaned = -0.000235188 Jy ! Component: 1900 - total flux cleaned = -0.00018406 Jy ! Component: 1950 - total flux cleaned = -0.000234942 Jy ! Component: 2000 - total flux cleaned = -0.000234971 Jy ! Component: 2050 - total flux cleaned = -0.000197386 Jy ! Component: 2100 - total flux cleaned = -0.000234733 Jy ! Component: 2150 - total flux cleaned = -0.000234742 Jy ! Component: 2200 - total flux cleaned = -0.000259217 Jy ! Component: 2250 - total flux cleaned = -0.00024698 Jy ! Component: 2300 - total flux cleaned = -0.000283394 Jy ! Component: 2350 - total flux cleaned = -0.000247212 Jy ! Component: 2400 - total flux cleaned = -0.000330936 Jy ! Component: 2450 - total flux cleaned = -0.000295139 Jy ! Component: 2500 - total flux cleaned = -0.000330607 Jy ! Component: 2550 - total flux cleaned = -0.0003893 Jy ! Component: 2600 - total flux cleaned = -0.000319367 Jy ! Component: 2650 - total flux cleaned = -0.000423815 Jy ! Component: 2700 - total flux cleaned = -0.000412322 Jy ! Component: 2750 - total flux cleaned = -0.00044672 Jy ! Component: 2800 - total flux cleaned = -0.00043532 Jy ! Component: 2850 - total flux cleaned = -0.000491974 Jy ! Component: 2900 - total flux cleaned = -0.00050325 Jy ! Component: 2950 - total flux cleaned = -0.000525649 Jy ! Component: 3000 - total flux cleaned = -0.000514547 Jy ! Component: 3050 - total flux cleaned = -0.000569887 Jy ! Component: 3100 - total flux cleaned = -0.000558846 Jy ! Component: 3150 - total flux cleaned = -0.000558854 Jy ! Component: 3200 - total flux cleaned = -0.000613499 Jy ! Component: 3250 - total flux cleaned = -0.000591867 Jy ! Component: 3300 - total flux cleaned = -0.000656607 Jy ! Component: 3350 - total flux cleaned = -0.000624224 Jy ! Component: 3400 - total flux cleaned = -0.000666946 Jy ! Component: 3450 - total flux cleaned = -0.000666977 Jy ! Component: 3500 - total flux cleaned = -0.000645791 Jy ! Component: 3550 - total flux cleaned = -0.000719406 Jy ! Component: 3600 - total flux cleaned = -0.000740383 Jy ! Component: 3650 - total flux cleaned = -0.000740386 Jy ! Component: 3700 - total flux cleaned = -0.000761122 Jy ! Component: 3750 - total flux cleaned = -0.000771369 Jy ! Component: 3800 - total flux cleaned = -0.000781649 Jy ! Component: 3850 - total flux cleaned = -0.000822491 Jy ! Component: 3900 - total flux cleaned = -0.000822547 Jy ! Component: 3950 - total flux cleaned = -0.000873149 Jy ! Component: 4000 - total flux cleaned = -0.00093354 Jy ! Component: 4050 - total flux cleaned = -0.00092348 Jy ! Total flux subtracted in 4096 components = -0.000933443 Jy ! Clean residual min=-0.000888 max=0.000724 Jy/beam ! Clean residual mean=0.000001 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.489638 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 435 components and 0.489638 Jy ![Exited script file: muppet] wmap "J1104+7932_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 5.354 at 75.92 degrees (North through East) ! Clean map min=-0.0010392 max=0.28491 Jy/beam ! Writing clean map to FITS file: J1104+7932_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.284906 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183533 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.193256 0.193256 0.386513 0.773026 1.54605 3.0921 6.18421 12.3684 24.7368 49.4737 98.9473 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.284 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.756 x 5.354 at 75.92 degrees (North through East) ! Clean map min=-0.0010392 max=0.28491 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1104+7932_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:39:15 2019