! Started logfile: J1104+7658_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:39:04 2019 obs J1104+7658_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1104+7658_S_2017_03_27_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.872873 visibilities/baseline/integration-bin. ! Found source: J1104+7658 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 17440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1104+7658_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 465 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982355Jy sigma=0.008338 ! Fit after self-cal, rms=0.948879Jy sigma=0.008073 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=4.465 mas, bpa=68.52 degrees ! Estimated noise=1082.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421032 Jy ! Component: 100 - total flux cleaned = 0.0517648 Jy ! Total flux subtracted in 100 components = 0.0517648 Jy ! Clean residual min=-0.003411 max=0.003667 Jy/beam ! Clean residual mean=-0.000007 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.0517648 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0517648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082293Jy sigma=0.000660 ! Fit after self-cal, rms=0.081907Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.765 mas, bmaj=5.354 mas, bpa=74.19 degrees ! Estimated noise=693.878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0036267 Jy ! Component: 100 - total flux cleaned = 0.00499048 Jy ! Component: 150 - total flux cleaned = 0.00525772 Jy ! Component: 200 - total flux cleaned = 0.00535944 Jy ! Total flux subtracted in 200 components = 0.00535944 Jy ! Clean residual min=-0.001919 max=0.002109 Jy/beam ! Clean residual mean=-0.000004 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0571243 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.0571243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081761Jy sigma=0.000656 ! Fit after self-cal, rms=0.081762Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 1.09 KP 1.00 ! LA 0.99 MK 1.01 NL 0.91 OV 1.04 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.08 HN 1.06 KP 0.93 ! LA 0.96 MK 1.04 NL 0.96 OV 1.04 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.07 HN 0.94 KP 1.07 ! LA 0.94 MK 1.03 NL 1.01 OV 1.03 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.04 HN 0.92 KP 1.00* ! LA 1.04 MK 0.94 NL 1.00* OV 1.11 ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.081762Jy sigma=0.000656 ! Fit after self-cal, rms=0.081480Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=5.347 mas, bpa=74.06 degrees ! Estimated noise=693.109 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506031 Jy ! Component: 100 - total flux cleaned = 0.000523417 Jy ! Component: 150 - total flux cleaned = 0.000537356 Jy ! Component: 200 - total flux cleaned = 0.000549769 Jy ! Total flux subtracted in 200 components = 0.000549769 Jy ! Clean residual min=-0.001847 max=0.001992 Jy/beam ! Clean residual mean=0.000001 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.057674 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.057674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081472Jy sigma=0.000655 ! Fit after self-cal, rms=0.081470Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081470Jy sigma=0.000655 ! Fit after self-cal, rms=0.082311Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.752 mas, bmaj=5.341 mas, bpa=74.15 degrees ! Estimated noise=693.024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273469 Jy ! Component: 100 - total flux cleaned = 0.000301507 Jy ! Component: 150 - total flux cleaned = 0.000312918 Jy ! Component: 200 - total flux cleaned = 0.000323029 Jy ! Total flux subtracted in 200 components = 0.000323029 Jy ! Clean residual min=-0.001726 max=0.001870 Jy/beam ! Clean residual mean=0.000002 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0579971 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0579971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082307Jy sigma=0.000654 ! Fit after self-cal, rms=0.082369Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150982 Jy ! Component: 100 - total flux cleaned = 0.00163891 Jy ! Component: 150 - total flux cleaned = 0.00169008 Jy ! Component: 200 - total flux cleaned = 0.00171073 Jy ! Total flux subtracted in 200 components = 0.00171073 Jy ! Clean residual min=-0.001670 max=0.001576 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0597078 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.0597078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082334Jy sigma=0.000653 ! Fit after self-cal, rms=0.082327Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082327Jy sigma=0.000653 ! Fit after self-cal, rms=0.082530Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=5.328 mas, bpa=73.96 degrees ! Estimated noise=693.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010793 Jy ! Component: 100 - total flux cleaned = 0.00132669 Jy ! Component: 150 - total flux cleaned = 0.00140359 Jy ! Component: 200 - total flux cleaned = 0.00147299 Jy ! Total flux subtracted in 200 components = 0.00147299 Jy ! Clean residual min=-0.001612 max=0.001539 Jy/beam ! Clean residual mean=0.000004 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0611808 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.0611808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082511Jy sigma=0.000653 ! Fit after self-cal, rms=0.082522Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031802 Jy ! Component: 100 - total flux cleaned = 0.000372633 Jy ! Component: 150 - total flux cleaned = 0.000420128 Jy ! Component: 200 - total flux cleaned = 0.000449533 Jy ! Total flux subtracted in 200 components = 0.000449533 Jy ! Clean residual min=-0.001601 max=0.001518 Jy/beam ! Clean residual mean=0.000004 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0616303 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 0.0616303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082513Jy sigma=0.000653 ! Fit after self-cal, rms=0.082511Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082511Jy sigma=0.000653 ! Fit after self-cal, rms=0.082583Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.983 mas, bmaj=9.632 mas, bpa=77.02 degrees ! Estimated noise=871.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667048 Jy ! Component: 100 - total flux cleaned = 0.000842267 Jy ! Component: 150 - total flux cleaned = 0.000907887 Jy ! Component: 200 - total flux cleaned = 0.00094767 Jy ! Total flux subtracted in 200 components = 0.00094767 Jy ! Clean residual min=-0.001618 max=0.001647 Jy/beam ! Clean residual mean=0.000007 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.062578 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.062578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082579Jy sigma=0.000653 ! Fit after self-cal, rms=0.082582Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206199 Jy ! Component: 100 - total flux cleaned = 0.000229879 Jy ! Component: 150 - total flux cleaned = 0.000229864 Jy ! Component: 200 - total flux cleaned = 0.000224171 Jy ! Total flux subtracted in 200 components = 0.000224171 Jy ! Clean residual min=-0.001604 max=0.001609 Jy/beam ! Clean residual mean=0.000007 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0628022 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.0628022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082581Jy sigma=0.000653 ! Fit after self-cal, rms=0.082577Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=5.322 mas, bpa=73.83 degrees ! Estimated noise=694.031 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.735 x 5.322 at 73.83 degrees (North through East) ! Clean map min=-0.0015362 max=0.053994 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=4.458 mas, bpa=68.45 degrees ! Estimated noise=1070.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418592 Jy ! Component: 100 - total flux cleaned = 0.0519191 Jy ! Component: 150 - total flux cleaned = 0.0567715 Jy ! Component: 200 - total flux cleaned = 0.0596455 Jy ! Total flux subtracted in 200 components = 0.0596455 Jy ! Clean residual min=-0.003008 max=0.002829 Jy/beam ! Clean residual mean=-0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0596454 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0596454 Jy ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=5.322 mas, bpa=73.83 degrees ! Estimated noise=694.031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163969 Jy ! Component: 100 - total flux cleaned = 0.00221885 Jy ! Component: 150 - total flux cleaned = 0.00236279 Jy ! Component: 200 - total flux cleaned = 0.00251979 Jy ! Total flux subtracted in 200 components = 0.00251979 Jy ! Clean residual min=-0.001594 max=0.001580 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0621652 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.0621652 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.983 mas, bmaj=9.632 mas, bpa=77.02 degrees ! Estimated noise=871.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649882 Jy ! Component: 100 - total flux cleaned = 0.000711605 Jy ! Component: 150 - total flux cleaned = 0.00073737 Jy ! Component: 200 - total flux cleaned = 0.000759991 Jy ! Total flux subtracted in 200 components = 0.000759991 Jy ! Clean residual min=-0.001660 max=0.001640 Jy/beam ! Clean residual mean=0.000008 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0629252 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.93341e-05 Jy ! Component: 100 - total flux cleaned = 4.64432e-05 Jy ! Component: 150 - total flux cleaned = 6.16367e-05 Jy ! Component: 200 - total flux cleaned = 6.15843e-05 Jy ! Total flux subtracted in 200 components = 6.15843e-05 Jy ! Clean residual min=-0.001667 max=0.001627 Jy/beam ! Clean residual mean=0.000008 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0629868 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.0629868 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=5.322 mas, bpa=73.83 degrees ! Estimated noise=694.031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.39462e-05 Jy ! Component: 100 - total flux cleaned = 9.25221e-06 Jy ! Component: 150 - total flux cleaned = -2.95335e-05 Jy ! Component: 200 - total flux cleaned = -4.68762e-05 Jy ! Total flux subtracted in 200 components = -4.68762e-05 Jy ! Clean residual min=-0.001591 max=0.001549 Jy/beam ! Clean residual mean=0.000004 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0629399 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.0629399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082579Jy sigma=0.000653 ! Fit after self-cal, rms=0.082580Jy sigma=0.000653 wmodel J1104+7658_S_2017_03_27_pus_map.mod ! Writing 62 model components to file: J1104+7658_S_2017_03_27_pus_map.mod wobs J1104+7658_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1104+7658_S_2017_03_27_pus_uvs.fits wwins J1104+7658_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J1104+7658_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000273032 Jy ! Component: 100 - total flux cleaned = -0.000358058 Jy ! Component: 150 - total flux cleaned = -0.000494221 Jy ! Component: 200 - total flux cleaned = -0.000625081 Jy ! Component: 250 - total flux cleaned = -0.000727192 Jy ! Component: 300 - total flux cleaned = -0.000850964 Jy ! Component: 350 - total flux cleaned = -0.000922903 Jy ! Component: 400 - total flux cleaned = -0.000875911 Jy ! Component: 450 - total flux cleaned = -0.000922323 Jy ! Component: 500 - total flux cleaned = -0.000967851 Jy ! Component: 550 - total flux cleaned = -0.00103485 Jy ! Component: 600 - total flux cleaned = -0.00121013 Jy ! Component: 650 - total flux cleaned = -0.00127446 Jy ! Component: 700 - total flux cleaned = -0.00131694 Jy ! Component: 750 - total flux cleaned = -0.00140122 Jy ! Component: 800 - total flux cleaned = -0.00144268 Jy ! Component: 850 - total flux cleaned = -0.00148393 Jy ! Component: 900 - total flux cleaned = -0.00148424 Jy ! Component: 950 - total flux cleaned = -0.00158431 Jy ! Component: 1000 - total flux cleaned = -0.00162372 Jy ! Component: 1050 - total flux cleaned = -0.00160413 Jy ! Component: 1100 - total flux cleaned = -0.00164274 Jy ! Component: 1150 - total flux cleaned = -0.00160471 Jy ! Component: 1200 - total flux cleaned = -0.00171855 Jy ! Component: 1250 - total flux cleaned = -0.00162479 Jy ! Component: 1300 - total flux cleaned = -0.00166236 Jy ! Component: 1350 - total flux cleaned = -0.00171782 Jy ! Component: 1400 - total flux cleaned = -0.00175423 Jy ! Component: 1450 - total flux cleaned = -0.00179027 Jy ! Component: 1500 - total flux cleaned = -0.00180808 Jy ! Component: 1550 - total flux cleaned = -0.0017905 Jy ! Component: 1600 - total flux cleaned = -0.00182555 Jy ! Component: 1650 - total flux cleaned = -0.0018431 Jy ! Component: 1700 - total flux cleaned = -0.00189497 Jy ! Component: 1750 - total flux cleaned = -0.00186063 Jy ! Component: 1800 - total flux cleaned = -0.00187771 Jy ! Component: 1850 - total flux cleaned = -0.00187777 Jy ! Component: 1900 - total flux cleaned = -0.00187782 Jy ! Component: 1950 - total flux cleaned = -0.00181139 Jy ! Component: 2000 - total flux cleaned = -0.00177854 Jy ! Component: 2050 - total flux cleaned = -0.00172958 Jy ! Component: 2100 - total flux cleaned = -0.00169705 Jy ! Component: 2150 - total flux cleaned = -0.00166466 Jy ! Component: 2200 - total flux cleaned = -0.00164846 Jy ! Component: 2250 - total flux cleaned = -0.00155268 Jy ! Component: 2300 - total flux cleaned = -0.00152097 Jy ! Component: 2350 - total flux cleaned = -0.00145795 Jy ! Component: 2400 - total flux cleaned = -0.0013955 Jy ! Component: 2450 - total flux cleaned = -0.0013955 Jy ! Component: 2500 - total flux cleaned = -0.00131842 Jy ! Component: 2550 - total flux cleaned = -0.00131834 Jy ! Component: 2600 - total flux cleaned = -0.00128792 Jy ! Component: 2650 - total flux cleaned = -0.00124233 Jy ! Component: 2700 - total flux cleaned = -0.00119725 Jy ! Component: 2750 - total flux cleaned = -0.00118241 Jy ! Component: 2800 - total flux cleaned = -0.00118225 Jy ! Component: 2850 - total flux cleaned = -0.00112335 Jy ! Component: 2900 - total flux cleaned = -0.00118185 Jy ! Component: 2950 - total flux cleaned = -0.00113806 Jy ! Component: 3000 - total flux cleaned = -0.00113802 Jy ! Component: 3050 - total flux cleaned = -0.00112367 Jy ! Component: 3100 - total flux cleaned = -0.00112364 Jy ! Component: 3150 - total flux cleaned = -0.00113783 Jy ! Component: 3200 - total flux cleaned = -0.00109528 Jy ! Component: 3250 - total flux cleaned = -0.00102492 Jy ! Component: 3300 - total flux cleaned = -0.000969101 Jy ! Component: 3350 - total flux cleaned = -0.000997066 Jy ! Component: 3400 - total flux cleaned = -0.000941622 Jy ! Component: 3450 - total flux cleaned = -0.000996694 Jy ! Component: 3500 - total flux cleaned = -0.000928315 Jy ! Component: 3550 - total flux cleaned = -0.000873799 Jy ! Component: 3600 - total flux cleaned = -0.000901059 Jy ! Component: 3650 - total flux cleaned = -0.000927884 Jy ! Component: 3700 - total flux cleaned = -0.000874146 Jy ! Component: 3750 - total flux cleaned = -0.000887406 Jy ! Component: 3800 - total flux cleaned = -0.000821159 Jy ! Component: 3850 - total flux cleaned = -0.00082118 Jy ! Component: 3900 - total flux cleaned = -0.000808094 Jy ! Component: 3950 - total flux cleaned = -0.000781926 Jy ! Component: 4000 - total flux cleaned = -0.000782004 Jy ! Component: 4050 - total flux cleaned = -0.000807905 Jy ! Total flux subtracted in 4096 components = -0.000807888 Jy ! Clean residual min=-0.000828 max=0.000726 Jy/beam ! Clean residual mean=0.000003 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.0621321 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 366 components and 0.062132 Jy ![Exited script file: muppet] wmap "J1104+7658_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.735 x 5.322 at 73.83 degrees (North through East) ! Clean map min=-0.0013613 max=0.053585 Jy/beam ! Writing clean map to FITS file: J1104+7658_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0535848 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000236431 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.32368 1.32368 2.64736 5.29473 10.5895 21.1789 42.3578 84.7156 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.735 x 5.322 at 73.83 degrees (North through East) ! Clean map min=-0.0013613 max=0.053585 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1104+7658_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:39:09 2019