! Started logfile: J1104+3812_S_2017_02_24_pus_uvs.log on Sat May 4 11:25:11 2019 obs J1104+3812_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1104+3812_S_2017_02_24_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.727778 visibilities/baseline/integration-bin. ! Found source: J1104+3812 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 3144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1104+3812_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.684411Jy sigma=0.023081 ! Fit after self-cal, rms=0.682676Jy sigma=0.023071 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=5.525 mas, bpa=-5.168 degrees ! Estimated noise=1265.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181635 Jy ! Component: 100 - total flux cleaned = 0.200175 Jy ! Total flux subtracted in 100 components = 0.200175 Jy ! Clean residual min=-0.056459 max=0.060959 Jy/beam ! Clean residual mean=0.000070 rms=0.017550 Jy/beam ! Combined flux in latest and established models = 0.200175 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.200175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145876Jy sigma=0.004513 ! Fit after self-cal, rms=0.145853Jy sigma=0.004513 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.062 mas, bmaj=6.223 mas, bpa=-0.0862 degrees ! Estimated noise=1166.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452064 Jy ! Component: 100 - total flux cleaned = 0.0508212 Jy ! Component: 150 - total flux cleaned = 0.0519991 Jy ! Component: 200 - total flux cleaned = 0.0539412 Jy ! Total flux subtracted in 200 components = 0.0539412 Jy ! Clean residual min=-0.044557 max=0.048680 Jy/beam ! Clean residual mean=0.000042 rms=0.013523 Jy/beam ! Combined flux in latest and established models = 0.254117 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.254117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110061Jy sigma=0.005362 ! Fit after self-cal, rms=0.109968Jy sigma=0.005362 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.89 HN 0.99 KP 0.85 ! LA 0.80 MK 0.88 NL 0.91 OV 0.92 ! PT 0.84 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.82 HN 1.01 KP 0.80 ! LA 0.78 MK 0.89 NL 0.88 OV 0.96 ! PT 0.83 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.85 HN 1.01 KP 0.90 ! LA 0.87 MK 0.90 NL 0.98 OV 0.86 ! PT 0.84 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 19.41 HN 0.98 KP 1.00* ! LA 0.88 MK 1.23 NL 1.00* OV 0.89 ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.109968Jy sigma=0.005362 ! Fit after self-cal, rms=0.830507Jy sigma=0.000891 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.007 mas, bmaj=6.188 mas, bpa=1.94 degrees ! Estimated noise=1185.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108766 Jy ! Component: 100 - total flux cleaned = 0.0144629 Jy ! Component: 150 - total flux cleaned = 0.0157356 Jy ! Component: 200 - total flux cleaned = 0.0160327 Jy ! Total flux subtracted in 200 components = 0.0160327 Jy ! Clean residual min=-0.007784 max=0.007485 Jy/beam ! Clean residual mean=0.000032 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 0.270149 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.270149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.828955Jy sigma=0.000884 ! Fit after self-cal, rms=0.829054Jy sigma=0.000879 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.829054Jy sigma=0.000879 ! Fit after self-cal, rms=0.062699Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.01 mas, bmaj=6.191 mas, bpa=1.015 degrees ! Estimated noise=1184.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308762 Jy ! Component: 100 - total flux cleaned = 0.0040621 Jy ! Component: 150 - total flux cleaned = 0.00459699 Jy ! Component: 200 - total flux cleaned = 0.00487921 Jy ! Total flux subtracted in 200 components = 0.00487921 Jy ! Clean residual min=-0.004547 max=0.006588 Jy/beam ! Clean residual mean=0.000006 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.275028 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.275028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062274Jy sigma=0.000671 ! Fit after self-cal, rms=0.062171Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (29.5, -121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00602956 Jy ! Component: 100 - total flux cleaned = 0.00888726 Jy ! Component: 150 - total flux cleaned = 0.0104757 Jy ! Component: 200 - total flux cleaned = 0.0117407 Jy ! Total flux subtracted in 200 components = 0.0117407 Jy ! Clean residual min=-0.003898 max=0.005806 Jy/beam ! Clean residual mean=0.000009 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.286769 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.286769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061529Jy sigma=0.000662 ! Fit after self-cal, rms=0.061481Jy sigma=0.000661 ! Inverting map ! Added new window around map position (-19, 14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596528 Jy ! Component: 100 - total flux cleaned = 0.00978806 Jy ! Component: 150 - total flux cleaned = 0.0122373 Jy ! Component: 200 - total flux cleaned = 0.0137366 Jy ! Total flux subtracted in 200 components = 0.0137366 Jy ! Clean residual min=-0.003558 max=0.004011 Jy/beam ! Clean residual mean=0.000007 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.300506 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.300506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060799Jy sigma=0.000652 ! Fit after self-cal, rms=0.060759Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060759Jy sigma=0.000652 ! Fit after self-cal, rms=0.060682Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.001 mas, bmaj=6.183 mas, bpa=0.9109 degrees ! Estimated noise=1187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303837 Jy ! Component: 100 - total flux cleaned = 0.00528503 Jy ! Component: 150 - total flux cleaned = 0.00666355 Jy ! Component: 200 - total flux cleaned = 0.00741335 Jy ! Total flux subtracted in 200 components = 0.00741335 Jy ! Clean residual min=-0.003358 max=0.003842 Jy/beam ! Clean residual mean=0.000007 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.307919 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.307919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060446Jy sigma=0.000647 ! Fit after self-cal, rms=0.060438Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524538 Jy ! Component: 100 - total flux cleaned = 0.0010709 Jy ! Component: 150 - total flux cleaned = 0.00152483 Jy ! Component: 200 - total flux cleaned = 0.00195039 Jy ! Total flux subtracted in 200 components = 0.00195039 Jy ! Clean residual min=-0.003339 max=0.003735 Jy/beam ! Clean residual mean=0.000007 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.30987 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 93 components and 0.30987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060330Jy sigma=0.000646 ! Fit after self-cal, rms=0.060323Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060323Jy sigma=0.000646 ! Fit after self-cal, rms=0.060337Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.772 mas, bmaj=9.565 mas, bpa=6.334 degrees ! Estimated noise=1390.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267149 Jy ! Component: 100 - total flux cleaned = 0.0042864 Jy ! Component: 150 - total flux cleaned = 0.0050809 Jy ! Component: 200 - total flux cleaned = 0.00549626 Jy ! Total flux subtracted in 200 components = 0.00549626 Jy ! Clean residual min=-0.004149 max=0.004384 Jy/beam ! Clean residual mean=0.000012 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.315366 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.315366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060288Jy sigma=0.000645 ! Fit after self-cal, rms=0.060271Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123464 Jy ! Component: 100 - total flux cleaned = 0.000354329 Jy ! Component: 150 - total flux cleaned = 0.000583221 Jy ! Component: 200 - total flux cleaned = 0.000787907 Jy ! Total flux subtracted in 200 components = 0.000787907 Jy ! Clean residual min=-0.004112 max=0.004332 Jy/beam ! Clean residual mean=0.000012 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.316154 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.316154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060264Jy sigma=0.000645 ! Fit after self-cal, rms=0.060256Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=6.174 mas, bpa=0.8341 degrees ! Estimated noise=1190.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.994 x 6.174 at 0.8341 degrees (North through East) ! Clean map min=-0.003286 max=0.27005 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.363 mas, bmaj=5.323 mas, bpa=-3.483 degrees ! Estimated noise=1464.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.209787 Jy ! Component: 100 - total flux cleaned = 0.258171 Jy ! Component: 150 - total flux cleaned = 0.275198 Jy ! Component: 200 - total flux cleaned = 0.28358 Jy ! Total flux subtracted in 200 components = 0.28358 Jy ! Clean residual min=-0.005319 max=0.007063 Jy/beam ! Clean residual mean=0.000005 rms=0.001271 Jy/beam ! Combined flux in latest and established models = 0.28358 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.28358 Jy ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=6.174 mas, bpa=0.8341 degrees ! Estimated noise=1190.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00784093 Jy ! Component: 100 - total flux cleaned = 0.0132161 Jy ! Component: 150 - total flux cleaned = 0.0171436 Jy ! Component: 200 - total flux cleaned = 0.019556 Jy ! Total flux subtracted in 200 components = 0.019556 Jy ! Clean residual min=-0.004374 max=0.004219 Jy/beam ! Clean residual mean=0.000008 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.303136 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 0.303136 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.772 mas, bmaj=9.565 mas, bpa=6.334 degrees ! Estimated noise=1390.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504781 Jy ! Component: 100 - total flux cleaned = 0.0081507 Jy ! Component: 150 - total flux cleaned = 0.00981354 Jy ! Component: 200 - total flux cleaned = 0.0108232 Jy ! Total flux subtracted in 200 components = 0.0108232 Jy ! Clean residual min=-0.004083 max=0.004878 Jy/beam ! Clean residual mean=0.000016 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.313959 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698898 Jy ! Component: 100 - total flux cleaned = 0.00131129 Jy ! Component: 150 - total flux cleaned = 0.00178339 Jy ! Component: 200 - total flux cleaned = 0.00226254 Jy ! Total flux subtracted in 200 components = 0.00226254 Jy ! Clean residual min=-0.004104 max=0.004620 Jy/beam ! Clean residual mean=0.000016 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.316222 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 107 components and 0.316222 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.994 mas, bmaj=6.174 mas, bpa=0.8341 degrees ! Estimated noise=1190.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238437 Jy ! Component: 100 - total flux cleaned = 0.000752751 Jy ! Component: 150 - total flux cleaned = 0.000895623 Jy ! Component: 200 - total flux cleaned = 0.00102653 Jy ! Total flux subtracted in 200 components = 0.00102653 Jy ! Clean residual min=-0.003578 max=0.003720 Jy/beam ! Clean residual mean=0.000008 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.317248 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 126 components and 0.317248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060182Jy sigma=0.000643 ! Fit after self-cal, rms=0.060146Jy sigma=0.000643 wmodel J1104+3812_S_2017_02_24_pus_map.mod ! Writing 126 model components to file: J1104+3812_S_2017_02_24_pus_map.mod wobs J1104+3812_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1104+3812_S_2017_02_24_pus_uvs.fits wwins J1104+3812_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J1104+3812_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591895 Jy ! Component: 100 - total flux cleaned = 0.00124593 Jy ! Component: 150 - total flux cleaned = 0.00157549 Jy ! Component: 200 - total flux cleaned = 0.00188855 Jy ! Component: 250 - total flux cleaned = 0.00209021 Jy ! Component: 300 - total flux cleaned = 0.00218739 Jy ! Component: 350 - total flux cleaned = 0.00199873 Jy ! Component: 400 - total flux cleaned = 0.0020906 Jy ! Component: 450 - total flux cleaned = 0.00200073 Jy ! Component: 500 - total flux cleaned = 0.0019573 Jy ! Component: 550 - total flux cleaned = 0.00195656 Jy ! Component: 600 - total flux cleaned = 0.00183124 Jy ! Component: 650 - total flux cleaned = 0.00183161 Jy ! Component: 700 - total flux cleaned = 0.0018725 Jy ! Component: 750 - total flux cleaned = 0.00179316 Jy ! Component: 800 - total flux cleaned = 0.00171602 Jy ! Component: 850 - total flux cleaned = 0.00183245 Jy ! Component: 900 - total flux cleaned = 0.00179474 Jy ! Component: 950 - total flux cleaned = 0.00186966 Jy ! Component: 1000 - total flux cleaned = 0.00175841 Jy ! Component: 1050 - total flux cleaned = 0.00179511 Jy ! Component: 1100 - total flux cleaned = 0.00183076 Jy ! Component: 1150 - total flux cleaned = 0.00186577 Jy ! Component: 1200 - total flux cleaned = 0.00190027 Jy ! Component: 1250 - total flux cleaned = 0.00186599 Jy ! Component: 1300 - total flux cleaned = 0.00189957 Jy ! Component: 1350 - total flux cleaned = 0.00176589 Jy ! Component: 1400 - total flux cleaned = 0.0017994 Jy ! Component: 1450 - total flux cleaned = 0.00183183 Jy ! Component: 1500 - total flux cleaned = 0.00179933 Jy ! Component: 1550 - total flux cleaned = 0.00173531 Jy ! Component: 1600 - total flux cleaned = 0.00167269 Jy ! Component: 1650 - total flux cleaned = 0.00167347 Jy ! Component: 1700 - total flux cleaned = 0.00176567 Jy ! Component: 1750 - total flux cleaned = 0.00170499 Jy ! Component: 1800 - total flux cleaned = 0.00179548 Jy ! Component: 1850 - total flux cleaned = 0.00191441 Jy ! Component: 1900 - total flux cleaned = 0.00191385 Jy ! Component: 1950 - total flux cleaned = 0.00200144 Jy ! Component: 2000 - total flux cleaned = 0.00200139 Jy ! Component: 2050 - total flux cleaned = 0.00211528 Jy ! Component: 2100 - total flux cleaned = 0.00214319 Jy ! Component: 2150 - total flux cleaned = 0.00211508 Jy ! Component: 2200 - total flux cleaned = 0.00217039 Jy ! Component: 2250 - total flux cleaned = 0.00222526 Jy ! Component: 2300 - total flux cleaned = 0.00225263 Jy ! Component: 2350 - total flux cleaned = 0.00230671 Jy ! Component: 2400 - total flux cleaned = 0.00238756 Jy ! Component: 2450 - total flux cleaned = 0.00244116 Jy ! Component: 2500 - total flux cleaned = 0.00254681 Jy ! Component: 2550 - total flux cleaned = 0.00265173 Jy ! Component: 2600 - total flux cleaned = 0.00280768 Jy ! Component: 2650 - total flux cleaned = 0.00296206 Jy ! Component: 2700 - total flux cleaned = 0.00301278 Jy ! Component: 2750 - total flux cleaned = 0.00316488 Jy ! Component: 2800 - total flux cleaned = 0.00331553 Jy ! Component: 2850 - total flux cleaned = 0.00336528 Jy ! Component: 2900 - total flux cleaned = 0.00343936 Jy ! Component: 2950 - total flux cleaned = 0.00356258 Jy ! Component: 3000 - total flux cleaned = 0.00373328 Jy ! Component: 3050 - total flux cleaned = 0.00375763 Jy ! Component: 3100 - total flux cleaned = 0.00387784 Jy ! Component: 3150 - total flux cleaned = 0.00402063 Jy ! Component: 3200 - total flux cleaned = 0.00404434 Jy ! Component: 3250 - total flux cleaned = 0.00416188 Jy ! Component: 3300 - total flux cleaned = 0.00413861 Jy ! Component: 3350 - total flux cleaned = 0.0042543 Jy ! Component: 3400 - total flux cleaned = 0.00434648 Jy ! Component: 3450 - total flux cleaned = 0.00436936 Jy ! Component: 3500 - total flux cleaned = 0.0044149 Jy ! Component: 3550 - total flux cleaned = 0.00457297 Jy ! Component: 3600 - total flux cleaned = 0.00459522 Jy ! Component: 3650 - total flux cleaned = 0.00479575 Jy ! Component: 3700 - total flux cleaned = 0.0048623 Jy ! Component: 3750 - total flux cleaned = 0.00488401 Jy ! Component: 3800 - total flux cleaned = 0.0049717 Jy ! Component: 3850 - total flux cleaned = 0.00505835 Jy ! Component: 3900 - total flux cleaned = 0.00516625 Jy ! Component: 3950 - total flux cleaned = 0.00525209 Jy ! Component: 4000 - total flux cleaned = 0.00535871 Jy ! Component: 4050 - total flux cleaned = 0.00540112 Jy ! Total flux subtracted in 4096 components = 0.00546435 Jy ! Clean residual min=-0.001438 max=0.001232 Jy/beam ! Clean residual mean=0.000006 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.322713 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 424 components and 0.322713 Jy ![Exited script file: muppet] wmap "J1104+3812_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.994 x 6.174 at 0.8341 degrees (North through East) ! Clean map min=-0.0029032 max=0.2687 Jy/beam ! Writing clean map to FITS file: J1104+3812_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.268697 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000387131 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.432232 0.432232 0.864463 1.72893 3.45785 6.91571 13.8314 27.6628 55.3256 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.268 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.994 x 6.174 at 0.8341 degrees (North through East) ! Clean map min=-0.0029032 max=0.2687 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1104+3812_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:25:16 2019