! Started logfile: J1104+0730_S_2017_08_12_pus_uvs.log on Fri May 10 14:58:24 2019 obs J1104+0730_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1104+0730_S_2017_08_12_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.938986 visibilities/baseline/integration-bin. ! Found source: J1104+0730 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 19268 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1104+0730_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 620 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.891791Jy sigma=0.007936 ! Fit after self-cal, rms=0.884562Jy sigma=0.007877 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=7.05 mas, bpa=-4.956 degrees ! Estimated noise=942.994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0899178 Jy ! Component: 100 - total flux cleaned = 0.109539 Jy ! Total flux subtracted in 100 components = 0.109539 Jy ! Clean residual min=-0.005132 max=0.006927 Jy/beam ! Clean residual mean=-0.000006 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.109539 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.109539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084120Jy sigma=0.000694 ! Fit after self-cal, rms=0.084118Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=7.874 mas, bpa=-3.383 degrees ! Estimated noise=673.616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00855421 Jy ! Component: 100 - total flux cleaned = 0.0123058 Jy ! Component: 150 - total flux cleaned = 0.0144755 Jy ! Component: 200 - total flux cleaned = 0.015467 Jy ! Total flux subtracted in 200 components = 0.015467 Jy ! Clean residual min=-0.003300 max=0.004666 Jy/beam ! Clean residual mean=-0.000013 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.125006 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.125006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083324Jy sigma=0.000686 ! Fit after self-cal, rms=0.083340Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.08 HN 0.94 KP 1.04 ! LA 1.00 MK 1.06 NL 0.86 OV 1.00 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.09 HN 1.01 KP 1.03 ! LA 0.96 MK 1.05 NL 0.99 OV 1.02 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.99 KP 0.98 ! LA 0.96 MK 1.05 NL 1.00 OV 0.95 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 0.91 KP 1.00* ! LA 0.90 MK 1.00 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.083340Jy sigma=0.000686 ! Fit after self-cal, rms=0.082822Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=7.875 mas, bpa=-2.979 degrees ! Estimated noise=673.424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00033404 Jy ! Component: 100 - total flux cleaned = -0.000461737 Jy ! Component: 150 - total flux cleaned = -0.000540649 Jy ! Component: 200 - total flux cleaned = -0.000573841 Jy ! Total flux subtracted in 200 components = -0.000573841 Jy ! Clean residual min=-0.003478 max=0.003895 Jy/beam ! Clean residual mean=-0.000011 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.124432 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.124432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082808Jy sigma=0.000681 ! Fit after self-cal, rms=0.082792Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082792Jy sigma=0.000680 ! Fit after self-cal, rms=0.083935Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=7.889 mas, bpa=-2.887 degrees ! Estimated noise=673.395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317852 Jy ! Component: 100 - total flux cleaned = 0.000253112 Jy ! Component: 150 - total flux cleaned = 0.000217341 Jy ! Component: 200 - total flux cleaned = 0.000185496 Jy ! Total flux subtracted in 200 components = 0.000185496 Jy ! Clean residual min=-0.002360 max=0.002457 Jy/beam ! Clean residual mean=-0.000016 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.124618 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 33 components and 0.124618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083925Jy sigma=0.000674 ! Fit after self-cal, rms=0.083967Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.15803e-05 Jy ! Component: 100 - total flux cleaned = -6.4265e-05 Jy ! Component: 150 - total flux cleaned = -8.73701e-05 Jy ! Component: 200 - total flux cleaned = -9.78761e-05 Jy ! Total flux subtracted in 200 components = -9.78761e-05 Jy ! Clean residual min=-0.002377 max=0.002453 Jy/beam ! Clean residual mean=-0.000016 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.12452 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.12452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083963Jy sigma=0.000674 ! Fit after self-cal, rms=0.083963Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083963Jy sigma=0.000674 ! Fit after self-cal, rms=0.084259Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=7.891 mas, bpa=-2.952 degrees ! Estimated noise=673.669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001916 Jy ! Component: 100 - total flux cleaned = 0.000190952 Jy ! Component: 150 - total flux cleaned = 0.000177926 Jy ! Component: 200 - total flux cleaned = 0.000154828 Jy ! Total flux subtracted in 200 components = 0.000154828 Jy ! Clean residual min=-0.001925 max=0.001721 Jy/beam ! Clean residual mean=-0.000016 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.124675 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.124675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084254Jy sigma=0.000667 ! Fit after self-cal, rms=0.084284Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.27189e-06 Jy ! Component: 100 - total flux cleaned = -1.29843e-05 Jy ! Component: 150 - total flux cleaned = -2.24775e-05 Jy ! Component: 200 - total flux cleaned = -3.20279e-05 Jy ! Total flux subtracted in 200 components = -3.20279e-05 Jy ! Clean residual min=-0.001919 max=0.001713 Jy/beam ! Clean residual mean=-0.000016 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.124643 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.124643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084281Jy sigma=0.000667 ! Fit after self-cal, rms=0.084281Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084281Jy sigma=0.000667 ! Fit after self-cal, rms=0.084450Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.418 mas, bmaj=12.23 mas, bpa=-6.817 degrees ! Estimated noise=848.391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481545 Jy ! Component: 100 - total flux cleaned = 0.000488946 Jy ! Component: 150 - total flux cleaned = 0.000507293 Jy ! Component: 200 - total flux cleaned = 0.000512503 Jy ! Total flux subtracted in 200 components = 0.000512503 Jy ! Clean residual min=-0.001961 max=0.001922 Jy/beam ! Clean residual mean=-0.000034 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.125155 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.125155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084451Jy sigma=0.000667 ! Fit after self-cal, rms=0.084452Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.96728e-05 Jy ! Component: 100 - total flux cleaned = 4.81128e-05 Jy ! Component: 150 - total flux cleaned = 4.80648e-05 Jy ! Component: 200 - total flux cleaned = 5.65321e-05 Jy ! Total flux subtracted in 200 components = 5.65321e-05 Jy ! Clean residual min=-0.001941 max=0.001927 Jy/beam ! Clean residual mean=-0.000034 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.125212 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.125212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084453Jy sigma=0.000667 ! Fit after self-cal, rms=0.084452Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.895 mas, bpa=-3.01 degrees ! Estimated noise=673.941 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.895 at -3.01 degrees (North through East) ! Clean map min=-0.0018427 max=0.11864 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=7.084 mas, bpa=-4.87 degrees ! Estimated noise=962.757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.09172 Jy ! Component: 100 - total flux cleaned = 0.111772 Jy ! Component: 150 - total flux cleaned = 0.117448 Jy ! Component: 200 - total flux cleaned = 0.120375 Jy ! Total flux subtracted in 200 components = 0.120375 Jy ! Clean residual min=-0.002625 max=0.002247 Jy/beam ! Clean residual mean=-0.000007 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.120375 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.120375 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.895 mas, bpa=-3.01 degrees ! Estimated noise=673.941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237161 Jy ! Component: 100 - total flux cleaned = 0.00349266 Jy ! Component: 150 - total flux cleaned = 0.00384175 Jy ! Component: 200 - total flux cleaned = 0.00393901 Jy ! Total flux subtracted in 200 components = 0.00393901 Jy ! Clean residual min=-0.001892 max=0.001732 Jy/beam ! Clean residual mean=-0.000017 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.124314 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.124314 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.418 mas, bmaj=12.23 mas, bpa=-6.817 degrees ! Estimated noise=848.391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453751 Jy ! Component: 100 - total flux cleaned = 0.000478015 Jy ! Component: 150 - total flux cleaned = 0.000509249 Jy ! Component: 200 - total flux cleaned = 0.000536822 Jy ! Total flux subtracted in 200 components = 0.000536822 Jy ! Clean residual min=-0.001924 max=0.001918 Jy/beam ! Clean residual mean=-0.000035 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.124851 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.3725e-05 Jy ! Component: 100 - total flux cleaned = 5.71455e-05 Jy ! Component: 150 - total flux cleaned = 8.62295e-05 Jy ! Component: 200 - total flux cleaned = 0.000113283 Jy ! Total flux subtracted in 200 components = 0.000113283 Jy ! Clean residual min=-0.001927 max=0.001918 Jy/beam ! Clean residual mean=-0.000034 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.124964 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.124964 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.895 mas, bpa=-3.01 degrees ! Estimated noise=673.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135057 Jy ! Component: 100 - total flux cleaned = -0.000205558 Jy ! Component: 150 - total flux cleaned = -0.000217164 Jy ! Component: 200 - total flux cleaned = -0.000228051 Jy ! Total flux subtracted in 200 components = -0.000228051 Jy ! Clean residual min=-0.001911 max=0.001650 Jy/beam ! Clean residual mean=-0.000016 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.124736 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 45 components and 0.124736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084450Jy sigma=0.000667 ! Fit after self-cal, rms=0.084449Jy sigma=0.000667 wmodel J1104+0730_S_2017_08_12_pus_map.mod ! Writing 45 model components to file: J1104+0730_S_2017_08_12_pus_map.mod wobs J1104+0730_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1104+0730_S_2017_08_12_pus_uvs.fits wwins J1104+0730_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1104+0730_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00072304 Jy ! Component: 100 - total flux cleaned = -0.000997634 Jy ! Component: 150 - total flux cleaned = -0.000969215 Jy ! Component: 200 - total flux cleaned = -0.000887316 Jy ! Component: 250 - total flux cleaned = -0.000861225 Jy ! Component: 300 - total flux cleaned = -0.000937227 Jy ! Component: 350 - total flux cleaned = -0.000936922 Jy ! Component: 400 - total flux cleaned = -0.00103357 Jy ! Component: 450 - total flux cleaned = -0.00108085 Jy ! Component: 500 - total flux cleaned = -0.0011494 Jy ! Component: 550 - total flux cleaned = -0.00112589 Jy ! Component: 600 - total flux cleaned = -0.00114748 Jy ! Component: 650 - total flux cleaned = -0.00116914 Jy ! Component: 700 - total flux cleaned = -0.00123331 Jy ! Component: 750 - total flux cleaned = -0.00129592 Jy ! Component: 800 - total flux cleaned = -0.00129611 Jy ! Component: 850 - total flux cleaned = -0.00139768 Jy ! Component: 900 - total flux cleaned = -0.00145829 Jy ! Component: 950 - total flux cleaned = -0.0016566 Jy ! Component: 1000 - total flux cleaned = -0.00173437 Jy ! Component: 1050 - total flux cleaned = -0.00183056 Jy ! Component: 1100 - total flux cleaned = -0.00192586 Jy ! Component: 1150 - total flux cleaned = -0.00198211 Jy ! Component: 1200 - total flux cleaned = -0.00203803 Jy ! Component: 1250 - total flux cleaned = -0.00216694 Jy ! Component: 1300 - total flux cleaned = -0.00223949 Jy ! Component: 1350 - total flux cleaned = -0.00223944 Jy ! Component: 1400 - total flux cleaned = -0.00225736 Jy ! Component: 1450 - total flux cleaned = -0.00236324 Jy ! Component: 1500 - total flux cleaned = -0.00243279 Jy ! Component: 1550 - total flux cleaned = -0.00248453 Jy ! Component: 1600 - total flux cleaned = -0.00250155 Jy ! Component: 1650 - total flux cleaned = -0.00255259 Jy ! Component: 1700 - total flux cleaned = -0.00260286 Jy ! Component: 1750 - total flux cleaned = -0.00256972 Jy ! Component: 1800 - total flux cleaned = -0.00265211 Jy ! Component: 1850 - total flux cleaned = -0.00263566 Jy ! Component: 1900 - total flux cleaned = -0.00266831 Jy ! Component: 1950 - total flux cleaned = -0.00271664 Jy ! Component: 2000 - total flux cleaned = -0.00270065 Jy ! Component: 2050 - total flux cleaned = -0.00270081 Jy ! Component: 2100 - total flux cleaned = -0.00274795 Jy ! Component: 2150 - total flux cleaned = -0.00273229 Jy ! Component: 2200 - total flux cleaned = -0.00274775 Jy ! Component: 2250 - total flux cleaned = -0.0027784 Jy ! Component: 2300 - total flux cleaned = -0.00280889 Jy ! Component: 2350 - total flux cleaned = -0.00280894 Jy ! Component: 2400 - total flux cleaned = -0.00279405 Jy ! Component: 2450 - total flux cleaned = -0.00285362 Jy ! Component: 2500 - total flux cleaned = -0.0028388 Jy ! Component: 2550 - total flux cleaned = -0.00282416 Jy ! Component: 2600 - total flux cleaned = -0.00282407 Jy ! Component: 2650 - total flux cleaned = -0.00283852 Jy ! Component: 2700 - total flux cleaned = -0.00279544 Jy ! Component: 2750 - total flux cleaned = -0.00292394 Jy ! Component: 2800 - total flux cleaned = -0.0028955 Jy ! Component: 2850 - total flux cleaned = -0.00293782 Jy ! Component: 2900 - total flux cleaned = -0.0029657 Jy ! Component: 2950 - total flux cleaned = -0.00302129 Jy ! Component: 3000 - total flux cleaned = -0.00299363 Jy ! Component: 3050 - total flux cleaned = -0.00297992 Jy ! Component: 3100 - total flux cleaned = -0.00303432 Jy ! Component: 3150 - total flux cleaned = -0.00306149 Jy ! Component: 3200 - total flux cleaned = -0.00308844 Jy ! Component: 3250 - total flux cleaned = -0.00311513 Jy ! Component: 3300 - total flux cleaned = -0.00312858 Jy ! Component: 3350 - total flux cleaned = -0.00314176 Jy ! Component: 3400 - total flux cleaned = -0.00322051 Jy ! Component: 3450 - total flux cleaned = -0.00318134 Jy ! Component: 3500 - total flux cleaned = -0.00320726 Jy ! Component: 3550 - total flux cleaned = -0.0032589 Jy ! Component: 3600 - total flux cleaned = -0.00320762 Jy ! Component: 3650 - total flux cleaned = -0.0032842 Jy ! Component: 3700 - total flux cleaned = -0.00329675 Jy ! Component: 3750 - total flux cleaned = -0.00325881 Jy ! Component: 3800 - total flux cleaned = -0.00328398 Jy ! Component: 3850 - total flux cleaned = -0.00332128 Jy ! Component: 3900 - total flux cleaned = -0.00329635 Jy ! Component: 3950 - total flux cleaned = -0.0032841 Jy ! Component: 4000 - total flux cleaned = -0.00329642 Jy ! Component: 4050 - total flux cleaned = -0.00329643 Jy ! Total flux subtracted in 4096 components = -0.00329638 Jy ! Clean residual min=-0.000807 max=0.000784 Jy/beam ! Clean residual mean=-0.000006 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.12144 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 329 components and 0.12144 Jy ![Exited script file: muppet] wmap "J1104+0730_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.895 at -3.01 degrees (North through East) ! Clean map min=-0.0014563 max=0.1188 Jy/beam ! Writing clean map to FITS file: J1104+0730_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000222897 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.562877 0.562877 1.12575 2.25151 4.50302 9.00603 18.0121 36.0241 72.0483 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.895 at -3.01 degrees (North through East) ! Clean map min=-0.0014563 max=0.1188 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1104+0730_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:58:28 2019