! Started logfile: J1102-4404_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:46:42 2019 obs J1102-4404_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1102-4404_S_2017_05_31_pus_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613889 visibilities/baseline/integration-bin. ! Found source: J1102-4404 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 5304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1102-4404_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.770179Jy sigma=0.004075 ! Fit after self-cal, rms=0.757462Jy sigma=0.004011 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.325 mas, bmaj=7.086 mas, bpa=-13.13 degrees ! Estimated noise=3219.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192155 Jy ! Component: 100 - total flux cleaned = 0.245951 Jy ! Total flux subtracted in 100 components = 0.245951 Jy ! Clean residual min=-0.014930 max=0.031626 Jy/beam ! Clean residual mean=-0.000053 rms=0.005906 Jy/beam ! Combined flux in latest and established models = 0.245951 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.245951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151359Jy sigma=0.000731 ! Fit after self-cal, rms=0.151401Jy sigma=0.000731 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.996 mas, bmaj=8.27 mas, bpa=-11.88 degrees ! Estimated noise=1998.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329209 Jy ! Component: 100 - total flux cleaned = 0.0458846 Jy ! Component: 150 - total flux cleaned = 0.0516398 Jy ! Component: 200 - total flux cleaned = 0.0532798 Jy ! Total flux subtracted in 200 components = 0.0532798 Jy ! Clean residual min=-0.011761 max=0.019073 Jy/beam ! Clean residual mean=-0.000032 rms=0.004584 Jy/beam ! Combined flux in latest and established models = 0.299231 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.299231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146640Jy sigma=0.000685 ! Fit after self-cal, rms=0.146695Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.97 ! LA 0.98 MK 0.99 NL 1.50 OV 0.98 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.97 ! LA 0.94 MK 1.02 NL 1.70 OV 0.97 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.94 ! LA 0.97 MK 1.02 NL 1.49 OV 0.94 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 0.86 ! LA 0.73 MK 1.10 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.146695Jy sigma=0.000685 ! Fit after self-cal, rms=0.165238Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=8.264 mas, bpa=-11.48 degrees ! Estimated noise=2025.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605486 Jy ! Component: 100 - total flux cleaned = 0.000607461 Jy ! Component: 150 - total flux cleaned = 0.00057825 Jy ! Component: 200 - total flux cleaned = 0.000549552 Jy ! Total flux subtracted in 200 components = 0.000549552 Jy ! Clean residual min=-0.006018 max=0.004967 Jy/beam ! Clean residual mean=-0.000011 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.29978 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.29978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165222Jy sigma=0.000653 ! Fit after self-cal, rms=0.165652Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165652Jy sigma=0.000652 ! Fit after self-cal, rms=0.166518Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=8.259 mas, bpa=-11.46 degrees ! Estimated noise=2028.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000610021 Jy ! Component: 100 - total flux cleaned = 0.000613836 Jy ! Component: 150 - total flux cleaned = 0.000613548 Jy ! Component: 200 - total flux cleaned = 0.000589151 Jy ! Total flux subtracted in 200 components = 0.000589151 Jy ! Clean residual min=-0.006023 max=0.004986 Jy/beam ! Clean residual mean=-0.000011 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.300369 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.300369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166503Jy sigma=0.000652 ! Fit after self-cal, rms=0.166508Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.73975e-05 Jy ! Component: 100 - total flux cleaned = -5.17078e-05 Jy ! Component: 150 - total flux cleaned = -7.55473e-05 Jy ! Component: 200 - total flux cleaned = -7.59982e-05 Jy ! Total flux subtracted in 200 components = -7.59982e-05 Jy ! Clean residual min=-0.005984 max=0.004975 Jy/beam ! Clean residual mean=-0.000012 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.300293 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.300293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166499Jy sigma=0.000652 ! Fit after self-cal, rms=0.166501Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166501Jy sigma=0.000652 ! Fit after self-cal, rms=0.166788Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=8.252 mas, bpa=-11.45 degrees ! Estimated noise=2030.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591838 Jy ! Component: 100 - total flux cleaned = 0.000639865 Jy ! Component: 150 - total flux cleaned = 0.000641315 Jy ! Component: 200 - total flux cleaned = 0.00064224 Jy ! Total flux subtracted in 200 components = 0.00064224 Jy ! Clean residual min=-0.005927 max=0.004949 Jy/beam ! Clean residual mean=-0.000011 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.300936 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.300936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166776Jy sigma=0.000652 ! Fit after self-cal, rms=0.166780Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.51728e-05 Jy ! Component: 100 - total flux cleaned = -4.47245e-05 Jy ! Component: 150 - total flux cleaned = -4.51452e-05 Jy ! Component: 200 - total flux cleaned = -6.37988e-05 Jy ! Total flux subtracted in 200 components = -6.37988e-05 Jy ! Clean residual min=-0.005887 max=0.004935 Jy/beam ! Clean residual mean=-0.000011 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.300872 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.300872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166773Jy sigma=0.000652 ! Fit after self-cal, rms=0.166775Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166775Jy sigma=0.000652 ! Fit after self-cal, rms=0.167034Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.669 mas, bmaj=31 mas, bpa=-6.815 degrees ! Estimated noise=2536.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224555 Jy ! Component: 100 - total flux cleaned = 0.000223999 Jy ! Component: 150 - total flux cleaned = 0.000224136 Jy ! Component: 200 - total flux cleaned = 0.000223848 Jy ! Total flux subtracted in 200 components = 0.000223848 Jy ! Clean residual min=-0.005869 max=0.004226 Jy/beam ! Clean residual mean=-0.000023 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.301096 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.301096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167030Jy sigma=0.000652 ! Fit after self-cal, rms=0.167029Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.20795e-05 Jy ! Component: 100 - total flux cleaned = -8.21516e-05 Jy ! Component: 150 - total flux cleaned = -8.2424e-05 Jy ! Component: 200 - total flux cleaned = -9.51458e-05 Jy ! Total flux subtracted in 200 components = -9.51458e-05 Jy ! Clean residual min=-0.005858 max=0.004234 Jy/beam ! Clean residual mean=-0.000024 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.301 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.301001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167025Jy sigma=0.000652 ! Fit after self-cal, rms=0.167024Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.243 mas, bpa=-11.44 degrees ! Estimated noise=2031.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 8.243 at -11.44 degrees (North through East) ! Clean map min=-0.0056245 max=0.23499 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.311 mas, bmaj=6.977 mas, bpa=-12.57 degrees ! Estimated noise=3312.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197399 Jy ! Component: 100 - total flux cleaned = 0.25253 Jy ! Component: 150 - total flux cleaned = 0.274906 Jy ! Component: 200 - total flux cleaned = 0.284368 Jy ! Total flux subtracted in 200 components = 0.284368 Jy ! Clean residual min=-0.007628 max=0.007850 Jy/beam ! Clean residual mean=-0.000020 rms=0.002195 Jy/beam ! Combined flux in latest and established models = 0.284368 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.284368 Jy ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.243 mas, bpa=-11.44 degrees ! Estimated noise=2031.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844399 Jy ! Component: 100 - total flux cleaned = 0.0122007 Jy ! Component: 150 - total flux cleaned = 0.0141456 Jy ! Component: 200 - total flux cleaned = 0.0152708 Jy ! Total flux subtracted in 200 components = 0.0152708 Jy ! Clean residual min=-0.005402 max=0.005077 Jy/beam ! Clean residual mean=-0.000018 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.299639 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 58 components and 0.299639 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.669 mas, bmaj=31 mas, bpa=-6.815 degrees ! Estimated noise=2536.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501516 Jy ! Component: 100 - total flux cleaned = 0.000546817 Jy ! Component: 150 - total flux cleaned = 0.000555705 Jy ! Component: 200 - total flux cleaned = 0.000571685 Jy ! Total flux subtracted in 200 components = 0.000571685 Jy ! Clean residual min=-0.005622 max=0.004398 Jy/beam ! Clean residual mean=-0.000031 rms=0.001497 Jy/beam ! Combined flux in latest and established models = 0.30021 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.10596e-06 Jy ! Component: 100 - total flux cleaned = 8.51369e-06 Jy ! Component: 150 - total flux cleaned = 8.71628e-06 Jy ! Component: 200 - total flux cleaned = 8.94189e-06 Jy ! Total flux subtracted in 200 components = 8.94189e-06 Jy ! Clean residual min=-0.005610 max=0.004401 Jy/beam ! Clean residual mean=-0.000031 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 0.300219 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.300219 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.243 mas, bpa=-11.44 degrees ! Estimated noise=2031.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153532 Jy ! Component: 100 - total flux cleaned = -0.000153391 Jy ! Component: 150 - total flux cleaned = -0.000131173 Jy ! Component: 200 - total flux cleaned = -0.000151625 Jy ! Total flux subtracted in 200 components = -0.000151625 Jy ! Clean residual min=-0.005338 max=0.005099 Jy/beam ! Clean residual mean=-0.000017 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.300068 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.300068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166978Jy sigma=0.000652 ! Fit after self-cal, rms=0.166966Jy sigma=0.000652 wmodel J1102-4404_S_2017_05_31_pus_map.mod ! Writing 73 model components to file: J1102-4404_S_2017_05_31_pus_map.mod wobs J1102-4404_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1102-4404_S_2017_05_31_pus_uvs.fits wwins J1102-4404_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J1102-4404_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000580538 Jy ! Component: 100 - total flux cleaned = -0.00118226 Jy ! Component: 150 - total flux cleaned = -0.000856283 Jy ! Component: 200 - total flux cleaned = -0.000668036 Jy ! Component: 250 - total flux cleaned = -0.000259973 Jy ! Component: 300 - total flux cleaned = -3.77236e-05 Jy ! Component: 350 - total flux cleaned = 0.000334762 Jy ! Component: 400 - total flux cleaned = 0.000639467 Jy ! Component: 450 - total flux cleaned = 0.000834229 Jy ! Component: 500 - total flux cleaned = 0.000975051 Jy ! Component: 550 - total flux cleaned = 0.00120091 Jy ! Component: 600 - total flux cleaned = 0.00133306 Jy ! Component: 650 - total flux cleaned = 0.00154812 Jy ! Component: 700 - total flux cleaned = 0.00179889 Jy ! Component: 750 - total flux cleaned = 0.00200116 Jy ! Component: 800 - total flux cleaned = 0.00223867 Jy ! Component: 850 - total flux cleaned = 0.0025107 Jy ! Component: 900 - total flux cleaned = 0.00281512 Jy ! Component: 950 - total flux cleaned = 0.00311322 Jy ! Component: 1000 - total flux cleaned = 0.00344173 Jy ! Component: 1050 - total flux cleaned = 0.00372804 Jy ! Component: 1100 - total flux cleaned = 0.00397401 Jy ! Component: 1150 - total flux cleaned = 0.00421454 Jy ! Component: 1200 - total flux cleaned = 0.00438333 Jy ! Component: 1250 - total flux cleaned = 0.00461594 Jy ! Component: 1300 - total flux cleaned = 0.00484371 Jy ! Component: 1350 - total flux cleaned = 0.00509953 Jy ! Component: 1400 - total flux cleaned = 0.00535084 Jy ! Component: 1450 - total flux cleaned = 0.00553603 Jy ! Component: 1500 - total flux cleaned = 0.00577858 Jy ! Component: 1550 - total flux cleaned = 0.00595709 Jy ! Component: 1600 - total flux cleaned = 0.00607376 Jy ! Component: 1650 - total flux cleaned = 0.0061311 Jy ! Component: 1700 - total flux cleaned = 0.00624456 Jy ! Component: 1750 - total flux cleaned = 0.00638458 Jy ! Component: 1800 - total flux cleaned = 0.00646711 Jy ! Component: 1850 - total flux cleaned = 0.00652159 Jy ! Component: 1900 - total flux cleaned = 0.00657579 Jy ! Component: 1950 - total flux cleaned = 0.00662903 Jy ! Component: 2000 - total flux cleaned = 0.00673397 Jy ! Component: 2050 - total flux cleaned = 0.00673379 Jy ! Component: 2100 - total flux cleaned = 0.0066824 Jy ! Component: 2150 - total flux cleaned = 0.00665696 Jy ! Component: 2200 - total flux cleaned = 0.00655636 Jy ! Component: 2250 - total flux cleaned = 0.00650656 Jy ! Component: 2300 - total flux cleaned = 0.00645716 Jy ! Component: 2350 - total flux cleaned = 0.00628514 Jy ! Component: 2400 - total flux cleaned = 0.00628529 Jy ! Component: 2450 - total flux cleaned = 0.00621231 Jy ! Component: 2500 - total flux cleaned = 0.00614012 Jy ! Component: 2550 - total flux cleaned = 0.00609208 Jy ! Component: 2600 - total flux cleaned = 0.00606814 Jy ! Component: 2650 - total flux cleaned = 0.00599686 Jy ! Component: 2700 - total flux cleaned = 0.0059967 Jy ! Component: 2750 - total flux cleaned = 0.00594986 Jy ! Component: 2800 - total flux cleaned = 0.00592656 Jy ! Component: 2850 - total flux cleaned = 0.00587993 Jy ! Component: 2900 - total flux cleaned = 0.00592623 Jy ! Component: 2950 - total flux cleaned = 0.00590308 Jy ! Component: 3000 - total flux cleaned = 0.00590306 Jy ! Component: 3050 - total flux cleaned = 0.00590302 Jy ! Component: 3100 - total flux cleaned = 0.00590296 Jy ! Component: 3150 - total flux cleaned = 0.00594836 Jy ! Component: 3200 - total flux cleaned = 0.00597099 Jy ! Component: 3250 - total flux cleaned = 0.00601627 Jy ! Component: 3300 - total flux cleaned = 0.00606131 Jy ! Component: 3350 - total flux cleaned = 0.00610623 Jy ! Component: 3400 - total flux cleaned = 0.00615082 Jy ! Component: 3450 - total flux cleaned = 0.00621798 Jy ! Component: 3500 - total flux cleaned = 0.00619567 Jy ! Component: 3550 - total flux cleaned = 0.00630713 Jy ! Component: 3600 - total flux cleaned = 0.00644063 Jy ! Component: 3650 - total flux cleaned = 0.0064408 Jy ! Component: 3700 - total flux cleaned = 0.00646292 Jy ! Component: 3750 - total flux cleaned = 0.00652958 Jy ! Component: 3800 - total flux cleaned = 0.00650742 Jy ! Component: 3850 - total flux cleaned = 0.00657391 Jy ! Component: 3900 - total flux cleaned = 0.00657367 Jy ! Component: 3950 - total flux cleaned = 0.00661798 Jy ! Component: 4000 - total flux cleaned = 0.00664018 Jy ! Component: 4050 - total flux cleaned = 0.00668458 Jy ! Total flux subtracted in 4096 components = 0.00666244 Jy ! Clean residual min=-0.001323 max=0.001297 Jy/beam ! Clean residual mean=-0.000005 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.30673 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 312 components and 0.30673 Jy ![Exited script file: muppet] wmap "J1102-4404_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 8.243 at -11.44 degrees (North through East) ! Clean map min=-0.0035675 max=0.25179 Jy/beam ! Writing clean map to FITS file: J1102-4404_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.25179 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000402418 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.479468 0.479468 0.958936 1.91787 3.83575 7.67149 15.343 30.686 61.3719 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.251 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 8.243 at -11.44 degrees (North through East) ! Clean map min=-0.0035675 max=0.25179 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1102-4404_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:46:47 2019