! Started logfile: J1102-4404_S_2017_05_01_pus_uvs.log on Wed May 1 18:34:01 2019 obs J1102-4404_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1102-4404_S_2017_05_01_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.532176 visibilities/baseline/integration-bin. ! Found source: J1102-4404 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 9196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1102-4404_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 256 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 263 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 637 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.580404Jy sigma=0.029531 ! Fit after self-cal, rms=0.567644Jy sigma=0.029386 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=7.775 mas, bpa=-14.68 degrees ! Estimated noise=2134.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236988 Jy ! Component: 100 - total flux cleaned = 0.285382 Jy ! Total flux subtracted in 100 components = 0.285382 Jy ! Clean residual min=-0.093759 max=0.105922 Jy/beam ! Clean residual mean=0.001395 rms=0.034148 Jy/beam ! Combined flux in latest and established models = 0.285382 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.285382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276773Jy sigma=0.007674 ! Fit after self-cal, rms=0.276757Jy sigma=0.007674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.399 mas, bmaj=10.3 mas, bpa=-15.14 degrees ! Estimated noise=975.597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0469115 Jy ! Component: 100 - total flux cleaned = -0.0491839 Jy ! Component: 150 - total flux cleaned = -0.0521484 Jy ! Component: 200 - total flux cleaned = -0.0539111 Jy ! Total flux subtracted in 200 components = -0.0539111 Jy ! Clean residual min=-0.093649 max=0.103809 Jy/beam ! Clean residual mean=0.002633 rms=0.034082 Jy/beam ! Combined flux in latest and established models = 0.231471 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 37 components and 0.231471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284977Jy sigma=0.006401 ! Fit after self-cal, rms=0.284914Jy sigma=0.006401 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.61 HN 1.00* KP 0.71 ! LA 0.66 MK 0.57 NL 0.99 OV 0.74 ! PT 0.69 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 1.00* KP 0.67 ! LA 0.64 MK 0.56 NL 1.15 OV 0.76 ! PT 0.65 SC 1.22 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.68 HN 1.00* KP 0.68 ! LA 0.66 MK 0.56 NL 1.14 OV 0.68 ! PT 0.66 SC 1.24 ! ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.74 HN 1.00* KP 1.00* ! LA 34.71 MK 0.54 NL 1.00* OV 1.00* ! PT 0.71 SC 1.00* ! ! ! Fit before self-cal, rms=0.284914Jy sigma=0.006401 ! Fit after self-cal, rms=0.127185Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=9.918 mas, bpa=-11.76 degrees ! Estimated noise=978.255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208844 Jy ! Component: 100 - total flux cleaned = 0.00217443 Jy ! Component: 150 - total flux cleaned = 0.00225141 Jy ! Component: 200 - total flux cleaned = 0.00225347 Jy ! Total flux subtracted in 200 components = 0.00225347 Jy ! Clean residual min=-0.004264 max=0.003640 Jy/beam ! Clean residual mean=0.000022 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.233725 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.233725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126965Jy sigma=0.000682 ! Fit after self-cal, rms=0.127941Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127941Jy sigma=0.000666 ! Fit after self-cal, rms=0.128338Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=9.898 mas, bpa=-11.9 degrees ! Estimated noise=979.043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159875 Jy ! Component: 100 - total flux cleaned = 0.00179205 Jy ! Component: 150 - total flux cleaned = 0.00185159 Jy ! Component: 200 - total flux cleaned = 0.00190455 Jy ! Total flux subtracted in 200 components = 0.00190455 Jy ! Clean residual min=-0.004021 max=0.003633 Jy/beam ! Clean residual mean=0.000022 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.235629 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.235629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128205Jy sigma=0.000665 ! Fit after self-cal, rms=0.128207Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.88343e-06 Jy ! Component: 100 - total flux cleaned = 4.04035e-05 Jy ! Component: 150 - total flux cleaned = 8.86401e-05 Jy ! Component: 200 - total flux cleaned = 0.000131938 Jy ! Total flux subtracted in 200 components = 0.000131938 Jy ! Clean residual min=-0.003986 max=0.003565 Jy/beam ! Clean residual mean=0.000022 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.235761 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.235761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128133Jy sigma=0.000665 ! Fit after self-cal, rms=0.128127Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128127Jy sigma=0.000665 ! Fit after self-cal, rms=0.120578Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=9.873 mas, bpa=-11.89 degrees ! Estimated noise=981.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108628 Jy ! Component: 100 - total flux cleaned = 0.0012172 Jy ! Component: 150 - total flux cleaned = 0.00129517 Jy ! Component: 200 - total flux cleaned = 0.00136747 Jy ! Total flux subtracted in 200 components = 0.00136747 Jy ! Clean residual min=-0.003002 max=0.003005 Jy/beam ! Clean residual mean=-0.000009 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.237129 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.237129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120508Jy sigma=0.000662 ! Fit after self-cal, rms=0.120485Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.53532e-05 Jy ! Component: 100 - total flux cleaned = 3.53917e-05 Jy ! Component: 150 - total flux cleaned = 6.77893e-05 Jy ! Component: 200 - total flux cleaned = 9.73802e-05 Jy ! Total flux subtracted in 200 components = 9.73802e-05 Jy ! Clean residual min=-0.002963 max=0.002998 Jy/beam ! Clean residual mean=-0.000008 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.237226 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.237226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120448Jy sigma=0.000662 ! Fit after self-cal, rms=0.120444Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120444Jy sigma=0.000662 ! Fit after self-cal, rms=0.120372Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=37.78 mas, bpa=-8.08 degrees ! Estimated noise=1140.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012891 Jy ! Component: 100 - total flux cleaned = 0.0014142 Jy ! Component: 150 - total flux cleaned = 0.00145919 Jy ! Component: 200 - total flux cleaned = 0.0015018 Jy ! Total flux subtracted in 200 components = 0.0015018 Jy ! Clean residual min=-0.002802 max=0.002293 Jy/beam ! Clean residual mean=-0.000018 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.238728 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 53 components and 0.238728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120335Jy sigma=0.000662 ! Fit after self-cal, rms=0.120330Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1956e-05 Jy ! Component: 100 - total flux cleaned = 6.17538e-05 Jy ! Component: 150 - total flux cleaned = 9.96668e-05 Jy ! Component: 200 - total flux cleaned = 0.000136601 Jy ! Total flux subtracted in 200 components = 0.000136601 Jy ! Clean residual min=-0.002786 max=0.002263 Jy/beam ! Clean residual mean=-0.000018 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.238864 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 53 components and 0.238864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120316Jy sigma=0.000662 ! Fit after self-cal, rms=0.120310Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=9.868 mas, bpa=-11.95 degrees ! Estimated noise=983.343 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 9.868 at -11.95 degrees (North through East) ! Clean map min=-0.013052 max=0.2785 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=8.11 mas, bpa=-10.42 degrees ! Estimated noise=1984.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214955 Jy ! Component: 100 - total flux cleaned = 0.242894 Jy ! Component: 150 - total flux cleaned = 0.242693 Jy ! Component: 200 - total flux cleaned = 0.241499 Jy ! Total flux subtracted in 200 components = 0.241499 Jy ! Clean residual min=-0.016522 max=0.016824 Jy/beam ! Clean residual mean=-0.000016 rms=0.003110 Jy/beam ! Combined flux in latest and established models = 0.241499 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.241499 Jy ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=9.868 mas, bpa=-11.95 degrees ! Estimated noise=983.343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000812053 Jy ! Component: 100 - total flux cleaned = -0.00129291 Jy ! Component: 150 - total flux cleaned = -0.00129576 Jy ! Component: 200 - total flux cleaned = -0.0015921 Jy ! Total flux subtracted in 200 components = -0.0015921 Jy ! Clean residual min=-0.004552 max=0.004301 Jy/beam ! Clean residual mean=-0.000009 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.239907 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.239907 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.43 mas, bmaj=37.78 mas, bpa=-8.08 degrees ! Estimated noise=1140.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72264e-06 Jy ! Component: 100 - total flux cleaned = -2.43092e-06 Jy ! Component: 150 - total flux cleaned = -3.03991e-06 Jy ! Component: 200 - total flux cleaned = -3.272e-06 Jy ! Total flux subtracted in 200 components = -3.272e-06 Jy ! Clean residual min=-0.002757 max=0.002148 Jy/beam ! Clean residual mean=-0.000017 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.239904 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96508e-06 Jy ! Component: 100 - total flux cleaned = 5.8111e-06 Jy ! Component: 150 - total flux cleaned = 1.03584e-05 Jy ! Component: 200 - total flux cleaned = 8.78436e-06 Jy ! Total flux subtracted in 200 components = 8.78436e-06 Jy ! Clean residual min=-0.002732 max=0.002137 Jy/beam ! Clean residual mean=-0.000017 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.239912 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.239912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=9.868 mas, bpa=-11.95 degrees ! Estimated noise=983.343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196493 Jy ! Component: 100 - total flux cleaned = 2.76467e-05 Jy ! Component: 150 - total flux cleaned = 2.81524e-05 Jy ! Component: 200 - total flux cleaned = -7.67152e-05 Jy ! Total flux subtracted in 200 components = -7.67152e-05 Jy ! Clean residual min=-0.003008 max=0.003183 Jy/beam ! Clean residual mean=-0.000009 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.239836 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.239836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120320Jy sigma=0.000661 ! Fit after self-cal, rms=0.120327Jy sigma=0.000661 wmodel J1102-4404_S_2017_05_01_pus_map.mod ! Writing 32 model components to file: J1102-4404_S_2017_05_01_pus_map.mod wobs J1102-4404_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1102-4404_S_2017_05_01_pus_uvs.fits wwins J1102-4404_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1102-4404_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101706 Jy ! Component: 100 - total flux cleaned = -0.000547776 Jy ! Component: 150 - total flux cleaned = -0.00095766 Jy ! Component: 200 - total flux cleaned = -0.00117104 Jy ! Component: 250 - total flux cleaned = -0.00129239 Jy ! Component: 300 - total flux cleaned = -0.00144774 Jy ! Component: 350 - total flux cleaned = -0.00178307 Jy ! Component: 400 - total flux cleaned = -0.00207011 Jy ! Component: 450 - total flux cleaned = -0.00238344 Jy ! Component: 500 - total flux cleaned = -0.00278754 Jy ! Component: 550 - total flux cleaned = -0.00314594 Jy ! Component: 600 - total flux cleaned = -0.00349409 Jy ! Component: 650 - total flux cleaned = -0.00392429 Jy ! Component: 700 - total flux cleaned = -0.00431214 Jy ! Component: 750 - total flux cleaned = -0.00466069 Jy ! Component: 800 - total flux cleaned = -0.00505791 Jy ! Component: 850 - total flux cleaned = -0.00533463 Jy ! Component: 900 - total flux cleaned = -0.0056045 Jy ! Component: 950 - total flux cleaned = -0.00584225 Jy ! Component: 1000 - total flux cleaned = -0.00604967 Jy ! Component: 1050 - total flux cleaned = -0.00625373 Jy ! Component: 1100 - total flux cleaned = -0.00637862 Jy ! Component: 1150 - total flux cleaned = -0.00647713 Jy ! Component: 1200 - total flux cleaned = -0.00654978 Jy ! Component: 1250 - total flux cleaned = -0.00662151 Jy ! Component: 1300 - total flux cleaned = -0.00664503 Jy ! Component: 1350 - total flux cleaned = -0.00673766 Jy ! Component: 1400 - total flux cleaned = -0.00680609 Jy ! Component: 1450 - total flux cleaned = -0.00687316 Jy ! Component: 1500 - total flux cleaned = -0.00687295 Jy ! Component: 1550 - total flux cleaned = -0.00693844 Jy ! Component: 1600 - total flux cleaned = -0.00696003 Jy ! Component: 1650 - total flux cleaned = -0.00698155 Jy ! Component: 1700 - total flux cleaned = -0.00702379 Jy ! Component: 1750 - total flux cleaned = -0.00706547 Jy ! Component: 1800 - total flux cleaned = -0.00706541 Jy ! Component: 1850 - total flux cleaned = -0.00712635 Jy ! Component: 1900 - total flux cleaned = -0.00716627 Jy ! Component: 1950 - total flux cleaned = -0.00722558 Jy ! Component: 2000 - total flux cleaned = -0.00724533 Jy ! Component: 2050 - total flux cleaned = -0.00728422 Jy ! Component: 2100 - total flux cleaned = -0.00728415 Jy ! Component: 2150 - total flux cleaned = -0.00730291 Jy ! Component: 2200 - total flux cleaned = -0.00726527 Jy ! Component: 2250 - total flux cleaned = -0.00724682 Jy ! Component: 2300 - total flux cleaned = -0.00726529 Jy ! Component: 2350 - total flux cleaned = -0.00722885 Jy ! Component: 2400 - total flux cleaned = -0.00728296 Jy ! Component: 2450 - total flux cleaned = -0.00728278 Jy ! Component: 2500 - total flux cleaned = -0.00728301 Jy ! Component: 2550 - total flux cleaned = -0.00735315 Jy ! Component: 2600 - total flux cleaned = -0.00731818 Jy ! Component: 2650 - total flux cleaned = -0.00735279 Jy ! Component: 2700 - total flux cleaned = -0.00731846 Jy ! Component: 2750 - total flux cleaned = -0.00728457 Jy ! Component: 2800 - total flux cleaned = -0.00728474 Jy ! Component: 2850 - total flux cleaned = -0.00726819 Jy ! Component: 2900 - total flux cleaned = -0.00725157 Jy ! Component: 2950 - total flux cleaned = -0.00723512 Jy ! Component: 3000 - total flux cleaned = -0.00723513 Jy ! Component: 3050 - total flux cleaned = -0.00723526 Jy ! Component: 3100 - total flux cleaned = -0.00721921 Jy ! Component: 3150 - total flux cleaned = -0.00725125 Jy ! Component: 3200 - total flux cleaned = -0.00725117 Jy ! Component: 3250 - total flux cleaned = -0.00721946 Jy ! Component: 3300 - total flux cleaned = -0.00726687 Jy ! Component: 3350 - total flux cleaned = -0.00728253 Jy ! Component: 3400 - total flux cleaned = -0.00731371 Jy ! Component: 3450 - total flux cleaned = -0.00732909 Jy ! Component: 3500 - total flux cleaned = -0.00736 Jy ! Component: 3550 - total flux cleaned = -0.00740608 Jy ! Component: 3600 - total flux cleaned = -0.00743651 Jy ! Component: 3650 - total flux cleaned = -0.00745173 Jy ! Component: 3700 - total flux cleaned = -0.00751217 Jy ! Component: 3750 - total flux cleaned = -0.00754225 Jy ! Component: 3800 - total flux cleaned = -0.00757239 Jy ! Component: 3850 - total flux cleaned = -0.00766202 Jy ! Component: 3900 - total flux cleaned = -0.0077214 Jy ! Component: 3950 - total flux cleaned = -0.00776578 Jy ! Component: 4000 - total flux cleaned = -0.00779527 Jy ! Component: 4050 - total flux cleaned = -0.00783928 Jy ! Total flux subtracted in 4096 components = -0.00791224 Jy ! Clean residual min=-0.000841 max=0.000862 Jy/beam ! Clean residual mean=-0.000004 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.231923 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 262 components and 0.231923 Jy ![Exited script file: muppet] wmap "J1102-4404_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 9.868 at -11.95 degrees (North through East) ! Clean map min=-0.011355 max=0.27725 Jy/beam ! Writing clean map to FITS file: J1102-4404_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.277247 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000256242 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.277271 0.277271 0.554541 1.10908 2.21816 4.43633 8.87266 17.7453 35.4906 70.9813 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.277 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 9.868 at -11.95 degrees (North through East) ! Clean map min=-0.011355 max=0.27725 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1102-4404_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:34:05 2019