! Started logfile: J1102+5941_S_2017_06_15_pus_uvs.log on Tue May 7 15:17:15 2019 obs J1102+5941_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1102+5941_S_2017_06_15_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980233 visibilities/baseline/integration-bin. ! Found source: J1102+5941 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 30348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1102+5941_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 939 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.846853Jy sigma=0.007940 ! Fit after self-cal, rms=0.815913Jy sigma=0.007680 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=3.854 mas, bpa=7.802 degrees ! Estimated noise=935.893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14923 Jy ! Component: 100 - total flux cleaned = 0.197934 Jy ! Total flux subtracted in 100 components = 0.197934 Jy ! Clean residual min=-0.017343 max=0.084602 Jy/beam ! Clean residual mean=-0.000043 rms=0.005428 Jy/beam ! Combined flux in latest and established models = 0.197934 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.197934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135678Jy sigma=0.001256 ! Fit after self-cal, rms=0.135607Jy sigma=0.001255 ! Inverting map ! Added new window around map position (19, 13.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0709626 Jy ! Component: 100 - total flux cleaned = 0.101175 Jy ! Total flux subtracted in 100 components = 0.101175 Jy ! Clean residual min=-0.008763 max=0.015745 Jy/beam ! Clean residual mean=-0.000025 rms=0.002345 Jy/beam ! Combined flux in latest and established models = 0.299109 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.299109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091080Jy sigma=0.000822 ! Fit after self-cal, rms=0.087378Jy sigma=0.000787 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229533 Jy ! Component: 100 - total flux cleaned = 0.0374387 Jy ! Total flux subtracted in 100 components = 0.0374387 Jy ! Clean residual min=-0.004854 max=0.008357 Jy/beam ! Clean residual mean=-0.000006 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 0.336548 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.336548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079890Jy sigma=0.000714 ! Fit after self-cal, rms=0.079692Jy sigma=0.000713 ! Inverting map ! Added new window around map position (15.5, 11.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01053 Jy ! Component: 100 - total flux cleaned = 0.017803 Jy ! Total flux subtracted in 100 components = 0.017803 Jy ! Clean residual min=-0.003562 max=0.005309 Jy/beam ! Clean residual mean=0.000002 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.354351 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 0.354351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077832Jy sigma=0.000695 ! Fit after self-cal, rms=0.077783Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.934 mas, bmaj=4.63 mas, bpa=5 degrees ! Estimated noise=491.181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.5, 14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00797951 Jy ! Component: 100 - total flux cleaned = 0.0131168 Jy ! Component: 150 - total flux cleaned = 0.016073 Jy ! Component: 200 - total flux cleaned = 0.0178096 Jy ! Total flux subtracted in 200 components = 0.0178096 Jy ! Clean residual min=-0.003116 max=0.004973 Jy/beam ! Clean residual mean=0.000013 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.372161 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 81 components and 0.37216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076742Jy sigma=0.000685 ! Fit after self-cal, rms=0.076692Jy sigma=0.000685 ! Inverting map ! Added new window around map position (34, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541441 Jy ! Component: 100 - total flux cleaned = 0.00854311 Jy ! Component: 150 - total flux cleaned = 0.0107476 Jy ! Component: 200 - total flux cleaned = 0.0121048 Jy ! Total flux subtracted in 200 components = 0.0121048 Jy ! Clean residual min=-0.002754 max=0.003089 Jy/beam ! Clean residual mean=0.000014 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.384265 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 107 components and 0.384265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076228Jy sigma=0.000681 ! Fit after self-cal, rms=0.076191Jy sigma=0.000680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.96 KP 1.03 ! LA 1.02 MK 1.05 NL 0.91 OV 1.00 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 1.01 KP 0.99 ! LA 0.96 MK 1.05 NL 1.05 OV 1.01 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 1.01 KP 0.98 ! LA 0.98 MK 1.08 NL 0.99 OV 0.95 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.96 KP 1.00* ! LA 1.05 MK 0.99 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.076191Jy sigma=0.000680 ! Fit after self-cal, rms=0.074681Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.97 mas, bmaj=4.668 mas, bpa=6.188 degrees ! Estimated noise=489.757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (42.5, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317931 Jy ! Component: 100 - total flux cleaned = 0.00513213 Jy ! Component: 150 - total flux cleaned = 0.00654481 Jy ! Component: 200 - total flux cleaned = 0.00739552 Jy ! Total flux subtracted in 200 components = 0.00739552 Jy ! Clean residual min=-0.001681 max=0.001800 Jy/beam ! Clean residual mean=-0.000003 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.391661 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 137 components and 0.391661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074518Jy sigma=0.000669 ! Fit after self-cal, rms=0.074497Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074497Jy sigma=0.000668 ! Fit after self-cal, rms=0.074540Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=4.671 mas, bpa=5.828 degrees ! Estimated noise=490.841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015589 Jy ! Component: 100 - total flux cleaned = 0.00267606 Jy ! Component: 150 - total flux cleaned = 0.00342604 Jy ! Component: 200 - total flux cleaned = 0.00378865 Jy ! Total flux subtracted in 200 components = 0.00378865 Jy ! Clean residual min=-0.001303 max=0.001493 Jy/beam ! Clean residual mean=-0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.395449 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 0.395449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074493Jy sigma=0.000666 ! Fit after self-cal, rms=0.074493Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.5, -110). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128484 Jy ! Component: 100 - total flux cleaned = 0.00203348 Jy ! Component: 150 - total flux cleaned = 0.00246975 Jy ! Component: 200 - total flux cleaned = 0.00273265 Jy ! Total flux subtracted in 200 components = 0.00273265 Jy ! Clean residual min=-0.001336 max=0.001253 Jy/beam ! Clean residual mean=-0.000000 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.398182 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 186 components and 0.398182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074459Jy sigma=0.000666 ! Fit after self-cal, rms=0.074459Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074459Jy sigma=0.000666 ! Fit after self-cal, rms=0.074533Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=4.67 mas, bpa=5.754 degrees ! Estimated noise=491.376 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810136 Jy ! Component: 100 - total flux cleaned = 0.00128938 Jy ! Component: 150 - total flux cleaned = 0.00148272 Jy ! Component: 200 - total flux cleaned = 0.0016425 Jy ! Total flux subtracted in 200 components = 0.0016425 Jy ! Clean residual min=-0.001334 max=0.001197 Jy/beam ! Clean residual mean=-0.000000 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.399825 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 197 components and 0.399825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074515Jy sigma=0.000665 ! Fit after self-cal, rms=0.074515Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000396157 Jy ! Component: 100 - total flux cleaned = 0.000544241 Jy ! Component: 150 - total flux cleaned = 0.000664091 Jy ! Component: 200 - total flux cleaned = 0.000739564 Jy ! Total flux subtracted in 200 components = 0.000739564 Jy ! Clean residual min=-0.001343 max=0.001165 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.400564 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 212 components and 0.400564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074505Jy sigma=0.000665 ! Fit after self-cal, rms=0.074505Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074505Jy sigma=0.000665 ! Fit after self-cal, rms=0.074570Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.23 mas, bmaj=8.677 mas, bpa=36 degrees ! Estimated noise=614.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049109 Jy ! Component: 100 - total flux cleaned = 0.000772444 Jy ! Component: 150 - total flux cleaned = 0.00099056 Jy ! Component: 200 - total flux cleaned = 0.0011155 Jy ! Total flux subtracted in 200 components = 0.0011155 Jy ! Clean residual min=-0.001254 max=0.001216 Jy/beam ! Clean residual mean=-0.000000 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.40168 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 231 components and 0.40168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074564Jy sigma=0.000665 ! Fit after self-cal, rms=0.074564Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176835 Jy ! Component: 100 - total flux cleaned = 0.000243874 Jy ! Component: 150 - total flux cleaned = 0.000281147 Jy ! Component: 200 - total flux cleaned = 0.000316155 Jy ! Total flux subtracted in 200 components = 0.000316155 Jy ! Clean residual min=-0.001214 max=0.001188 Jy/beam ! Clean residual mean=-0.000000 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.401996 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 245 components and 0.401996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074562Jy sigma=0.000665 ! Fit after self-cal, rms=0.074562Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=4.671 mas, bpa=5.792 degrees ! Estimated noise=491.776 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.969 x 4.671 at 5.792 degrees (North through East) ! Clean map min=-0.001277 max=0.19589 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=3.891 mas, bpa=8.49 degrees ! Estimated noise=941.723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156341 Jy ! Component: 100 - total flux cleaned = 0.230871 Jy ! Component: 150 - total flux cleaned = 0.277243 Jy ! Component: 200 - total flux cleaned = 0.307244 Jy ! Total flux subtracted in 200 components = 0.307244 Jy ! Clean residual min=-0.006404 max=0.016092 Jy/beam ! Clean residual mean=-0.000015 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 0.307244 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.307244 Jy ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=4.671 mas, bpa=5.792 degrees ! Estimated noise=491.776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234142 Jy ! Component: 100 - total flux cleaned = 0.0383094 Jy ! Component: 150 - total flux cleaned = 0.0486023 Jy ! Component: 200 - total flux cleaned = 0.0565203 Jy ! Total flux subtracted in 200 components = 0.0565203 Jy ! Clean residual min=-0.002610 max=0.004675 Jy/beam ! Clean residual mean=-0.000012 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.363764 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 54 components and 0.363764 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628282 Jy ! Component: 100 - total flux cleaned = 0.0113265 Jy ! Component: 150 - total flux cleaned = 0.0154622 Jy ! Component: 200 - total flux cleaned = 0.0188709 Jy ! Total flux subtracted in 200 components = 0.0188709 Jy ! Clean residual min=-0.001639 max=0.002055 Jy/beam ! Clean residual mean=-0.000005 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.382635 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 88 components and 0.382635 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283156 Jy ! Component: 100 - total flux cleaned = 0.00520503 Jy ! Component: 150 - total flux cleaned = 0.00723673 Jy ! Component: 200 - total flux cleaned = 0.00900014 Jy ! Total flux subtracted in 200 components = 0.00900014 Jy ! Clean residual min=-0.001380 max=0.001344 Jy/beam ! Clean residual mean=-0.000002 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.391636 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 128 components and 0.391635 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.23 mas, bmaj=8.677 mas, bpa=36 degrees ! Estimated noise=614.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253881 Jy ! Component: 100 - total flux cleaned = 0.004314 Jy ! Component: 150 - total flux cleaned = 0.00568404 Jy ! Component: 200 - total flux cleaned = 0.00677411 Jy ! Total flux subtracted in 200 components = 0.00677411 Jy ! Clean residual min=-0.001312 max=0.001276 Jy/beam ! Clean residual mean=-0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.39841 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000685513 Jy ! Component: 100 - total flux cleaned = 0.00117656 Jy ! Component: 150 - total flux cleaned = 0.00157465 Jy ! Component: 200 - total flux cleaned = 0.00189981 Jy ! Total flux subtracted in 200 components = 0.00189981 Jy ! Clean residual min=-0.001253 max=0.001164 Jy/beam ! Clean residual mean=-0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.400309 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 234 components and 0.400309 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=4.671 mas, bpa=5.792 degrees ! Estimated noise=491.776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406629 Jy ! Component: 100 - total flux cleaned = 0.000694239 Jy ! Component: 150 - total flux cleaned = 0.000928012 Jy ! Component: 200 - total flux cleaned = 0.00102426 Jy ! Total flux subtracted in 200 components = 0.00102426 Jy ! Clean residual min=-0.001393 max=0.001312 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.401333 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 255 components and 0.401333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074592Jy sigma=0.000665 ! Fit after self-cal, rms=0.074586Jy sigma=0.000665 wmodel J1102+5941_S_2017_06_15_pus_map.mod ! Writing 255 model components to file: J1102+5941_S_2017_06_15_pus_map.mod wobs J1102+5941_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1102+5941_S_2017_06_15_pus_uvs.fits wwins J1102+5941_S_2017_06_15_pus_map.win ! wwins: Wrote 7 windows to J1102+5941_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.40294e-05 Jy ! Component: 100 - total flux cleaned = 7.61967e-05 Jy ! Component: 150 - total flux cleaned = 1.75578e-05 Jy ! Component: 200 - total flux cleaned = -9.28439e-07 Jy ! Component: 250 - total flux cleaned = -7.48118e-05 Jy ! Component: 300 - total flux cleaned = -0.000181457 Jy ! Component: 350 - total flux cleaned = -0.000181254 Jy ! Component: 400 - total flux cleaned = -0.000232081 Jy ! Component: 450 - total flux cleaned = -0.000215403 Jy ! Component: 500 - total flux cleaned = -0.000263702 Jy ! Component: 550 - total flux cleaned = -0.000247248 Jy ! Component: 600 - total flux cleaned = -0.000153517 Jy ! Component: 650 - total flux cleaned = -0.000153472 Jy ! Component: 700 - total flux cleaned = -7.77407e-05 Jy ! Component: 750 - total flux cleaned = -6.29399e-05 Jy ! Component: 800 - total flux cleaned = -4.04722e-06 Jy ! Component: 850 - total flux cleaned = 5.38926e-05 Jy ! Component: 900 - total flux cleaned = 9.67912e-05 Jy ! Component: 950 - total flux cleaned = 0.000139043 Jy ! Component: 1000 - total flux cleaned = 0.000208874 Jy ! Component: 1050 - total flux cleaned = 0.000195151 Jy ! Component: 1100 - total flux cleaned = 0.000236105 Jy ! Component: 1150 - total flux cleaned = 0.000236092 Jy ! Component: 1200 - total flux cleaned = 0.000262801 Jy ! Component: 1250 - total flux cleaned = 0.000289028 Jy ! Component: 1300 - total flux cleaned = 0.000262929 Jy ! Component: 1350 - total flux cleaned = 0.000275898 Jy ! Component: 1400 - total flux cleaned = 0.000263252 Jy ! Component: 1450 - total flux cleaned = 0.000326648 Jy ! Component: 1500 - total flux cleaned = 0.000288935 Jy ! Component: 1550 - total flux cleaned = 0.000313665 Jy ! Component: 1600 - total flux cleaned = 0.000301525 Jy ! Component: 1650 - total flux cleaned = 0.000313781 Jy ! Component: 1700 - total flux cleaned = 0.000325882 Jy ! Component: 1750 - total flux cleaned = 0.00028994 Jy ! Component: 1800 - total flux cleaned = 0.000361197 Jy ! Component: 1850 - total flux cleaned = 0.00036121 Jy ! Component: 1900 - total flux cleaned = 0.000419763 Jy ! Component: 1950 - total flux cleaned = 0.000419623 Jy ! Component: 2000 - total flux cleaned = 0.000419538 Jy ! Component: 2050 - total flux cleaned = 0.000430962 Jy ! Component: 2100 - total flux cleaned = 0.00047607 Jy ! Component: 2150 - total flux cleaned = 0.000453648 Jy ! Component: 2200 - total flux cleaned = 0.000453477 Jy ! Component: 2250 - total flux cleaned = 0.000431335 Jy ! Component: 2300 - total flux cleaned = 0.000442295 Jy ! Component: 2350 - total flux cleaned = 0.000453281 Jy ! Component: 2400 - total flux cleaned = 0.000453353 Jy ! Component: 2450 - total flux cleaned = 0.000464098 Jy ! Component: 2500 - total flux cleaned = 0.000453518 Jy ! Component: 2550 - total flux cleaned = 0.000495774 Jy ! Component: 2600 - total flux cleaned = 0.000464339 Jy ! Component: 2650 - total flux cleaned = 0.000495603 Jy ! Component: 2700 - total flux cleaned = 0.000495495 Jy ! Component: 2750 - total flux cleaned = 0.000516026 Jy ! Component: 2800 - total flux cleaned = 0.000495546 Jy ! Component: 2850 - total flux cleaned = 0.000475312 Jy ! Component: 2900 - total flux cleaned = 0.000495546 Jy ! Component: 2950 - total flux cleaned = 0.000525485 Jy ! Component: 3000 - total flux cleaned = 0.000485727 Jy ! Component: 3050 - total flux cleaned = 0.000505353 Jy ! Component: 3100 - total flux cleaned = 0.000524968 Jy ! Component: 3150 - total flux cleaned = 0.000495753 Jy ! Component: 3200 - total flux cleaned = 0.000505439 Jy ! Component: 3250 - total flux cleaned = 0.000495777 Jy ! Component: 3300 - total flux cleaned = 0.000486264 Jy ! Component: 3350 - total flux cleaned = 0.000457831 Jy ! Component: 3400 - total flux cleaned = 0.000448385 Jy ! Component: 3450 - total flux cleaned = 0.000513978 Jy ! Component: 3500 - total flux cleaned = 0.000467211 Jy ! Component: 3550 - total flux cleaned = 0.000467274 Jy ! Component: 3600 - total flux cleaned = 0.000439592 Jy ! Component: 3650 - total flux cleaned = 0.000457935 Jy ! Component: 3700 - total flux cleaned = 0.000430614 Jy ! Component: 3750 - total flux cleaned = 0.000448714 Jy ! Component: 3800 - total flux cleaned = 0.000430721 Jy ! Component: 3850 - total flux cleaned = 0.000403866 Jy ! Component: 3900 - total flux cleaned = 0.000403825 Jy ! Component: 3950 - total flux cleaned = 0.000386141 Jy ! Component: 4000 - total flux cleaned = 0.000394934 Jy ! Component: 4050 - total flux cleaned = 0.00040364 Jy ! Total flux subtracted in 4096 components = 0.000394871 Jy ! Clean residual min=-0.000530 max=0.000548 Jy/beam ! Clean residual mean=0.000001 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.401728 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 538 components and 0.401728 Jy ![Exited script file: muppet] wmap "J1102+5941_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.969 x 4.671 at 5.792 degrees (North through East) ! Clean map min=-0.0010995 max=0.19587 Jy/beam ! Writing clean map to FITS file: J1102+5941_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.195871 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153411 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234968 0.234968 0.469936 0.939871 1.87974 3.75948 7.51897 15.0379 30.0759 60.1517 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.195 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.969 x 4.671 at 5.792 degrees (North through East) ! Clean map min=-0.0010995 max=0.19587 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1102+5941_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:17:22 2019