! Started logfile: J1059-1134_S_2017_05_01_pus_uvs.log on Wed May 1 18:33:56 2019 obs J1059-1134_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1059-1134_S_2017_05_01_pus_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959192 visibilities/baseline/integration-bin. ! Found source: J1059-1134 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 9496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1059-1134_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.808002Jy sigma=0.005760 ! Fit after self-cal, rms=0.794435Jy sigma=0.005666 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=6.924 mas, bpa=-3.912 degrees ! Estimated noise=1626.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.163784 Jy ! Component: 100 - total flux cleaned = 0.199516 Jy ! Total flux subtracted in 100 components = 0.199516 Jy ! Clean residual min=-0.006789 max=0.010005 Jy/beam ! Clean residual mean=-0.000036 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.199516 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.199516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109627Jy sigma=0.000697 ! Fit after self-cal, rms=0.109623Jy sigma=0.000697 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=7.875 mas, bpa=-2.394 degrees ! Estimated noise=1144.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106622 Jy ! Component: 100 - total flux cleaned = 0.0157055 Jy ! Component: 150 - total flux cleaned = 0.0184589 Jy ! Component: 200 - total flux cleaned = 0.019109 Jy ! Total flux subtracted in 200 components = 0.019109 Jy ! Clean residual min=-0.007583 max=0.006723 Jy/beam ! Clean residual mean=-0.000024 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.218625 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.218625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108481Jy sigma=0.000691 ! Fit after self-cal, rms=0.108487Jy sigma=0.000691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.88 HN 1.02 KP 1.00 ! LA 1.01 MK 1.00 NL 0.96 OV 1.03 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 1.06 KP 0.97 ! LA 0.98 MK 1.00 NL 1.11 OV 1.05 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.07 KP 0.99 ! LA 0.97 MK 1.07 NL 1.18 OV 0.98 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.99 KP 1.00* ! LA 0.82 MK 0.92 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.108487Jy sigma=0.000691 ! Fit after self-cal, rms=0.104574Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.38 mas, bmaj=7.874 mas, bpa=-1.903 degrees ! Estimated noise=1141.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000754285 Jy ! Component: 100 - total flux cleaned = -0.000920111 Jy ! Component: 150 - total flux cleaned = -0.000962206 Jy ! Component: 200 - total flux cleaned = -0.00103939 Jy ! Total flux subtracted in 200 components = -0.00103939 Jy ! Clean residual min=-0.005389 max=0.005572 Jy/beam ! Clean residual mean=-0.000002 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.217586 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.217586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104522Jy sigma=0.000680 ! Fit after self-cal, rms=0.104465Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104465Jy sigma=0.000680 ! Fit after self-cal, rms=0.103461Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=7.863 mas, bpa=-2.134 degrees ! Estimated noise=1140.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000783461 Jy ! Component: 100 - total flux cleaned = 0.000844846 Jy ! Component: 150 - total flux cleaned = 0.00087147 Jy ! Component: 200 - total flux cleaned = 0.000921136 Jy ! Total flux subtracted in 200 components = 0.000921136 Jy ! Clean residual min=-0.003175 max=0.002786 Jy/beam ! Clean residual mean=-0.000006 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.218507 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.218507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103439Jy sigma=0.000670 ! Fit after self-cal, rms=0.103464Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3417e-05 Jy ! Component: 100 - total flux cleaned = 2.29126e-05 Jy ! Component: 150 - total flux cleaned = 4.55422e-05 Jy ! Component: 200 - total flux cleaned = 8.72325e-05 Jy ! Total flux subtracted in 200 components = 8.72325e-05 Jy ! Clean residual min=-0.003178 max=0.002728 Jy/beam ! Clean residual mean=-0.000006 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.218594 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.218594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103454Jy sigma=0.000670 ! Fit after self-cal, rms=0.103451Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103451Jy sigma=0.000670 ! Fit after self-cal, rms=0.103398Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=7.857 mas, bpa=-2.178 degrees ! Estimated noise=1140.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537317 Jy ! Component: 100 - total flux cleaned = 0.000558414 Jy ! Component: 150 - total flux cleaned = 0.000577045 Jy ! Component: 200 - total flux cleaned = 0.000595262 Jy ! Total flux subtracted in 200 components = 0.000595262 Jy ! Clean residual min=-0.003152 max=0.002694 Jy/beam ! Clean residual mean=-0.000005 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.219189 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.219189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103389Jy sigma=0.000670 ! Fit after self-cal, rms=0.103388Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67683e-05 Jy ! Component: 100 - total flux cleaned = 1.69048e-05 Jy ! Component: 150 - total flux cleaned = 3.31208e-05 Jy ! Component: 200 - total flux cleaned = 6.38469e-05 Jy ! Total flux subtracted in 200 components = 6.38469e-05 Jy ! Clean residual min=-0.003158 max=0.002666 Jy/beam ! Clean residual mean=-0.000005 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.219253 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.219253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103382Jy sigma=0.000670 ! Fit after self-cal, rms=0.103382Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103382Jy sigma=0.000670 ! Fit after self-cal, rms=0.103353Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=13.73 mas, bpa=1.432 degrees ! Estimated noise=1408.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075962 Jy ! Component: 100 - total flux cleaned = 0.000825309 Jy ! Component: 150 - total flux cleaned = 0.000872305 Jy ! Component: 200 - total flux cleaned = 0.000899638 Jy ! Total flux subtracted in 200 components = 0.000899638 Jy ! Clean residual min=-0.003937 max=0.003017 Jy/beam ! Clean residual mean=-0.000009 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.220153 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.220153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103353Jy sigma=0.000670 ! Fit after self-cal, rms=0.103352Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.14841e-05 Jy ! Component: 100 - total flux cleaned = -4.02955e-05 Jy ! Component: 150 - total flux cleaned = -1.09787e-05 Jy ! Component: 200 - total flux cleaned = 1.51134e-05 Jy ! Total flux subtracted in 200 components = 1.51134e-05 Jy ! Clean residual min=-0.003925 max=0.002998 Jy/beam ! Clean residual mean=-0.000009 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.220168 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.220168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103355Jy sigma=0.000670 ! Fit after self-cal, rms=0.103355Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=7.853 mas, bpa=-2.201 degrees ! Estimated noise=1140.11 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.374 x 7.853 at -2.201 degrees (North through East) ! Clean map min=-0.003048 max=0.20838 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=6.902 mas, bpa=-3.669 degrees ! Estimated noise=1628.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.163835 Jy ! Component: 100 - total flux cleaned = 0.199628 Jy ! Component: 150 - total flux cleaned = 0.208901 Jy ! Component: 200 - total flux cleaned = 0.213443 Jy ! Total flux subtracted in 200 components = 0.213443 Jy ! Clean residual min=-0.003751 max=0.003726 Jy/beam ! Clean residual mean=-0.000009 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.213443 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.213443 Jy ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=7.853 mas, bpa=-2.201 degrees ! Estimated noise=1140.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340961 Jy ! Component: 100 - total flux cleaned = 0.00514369 Jy ! Component: 150 - total flux cleaned = 0.00571635 Jy ! Component: 200 - total flux cleaned = 0.00596121 Jy ! Total flux subtracted in 200 components = 0.00596121 Jy ! Clean residual min=-0.003236 max=0.002760 Jy/beam ! Clean residual mean=-0.000006 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.219404 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.219404 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.623 mas, bmaj=13.73 mas, bpa=1.432 degrees ! Estimated noise=1408.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763205 Jy ! Component: 100 - total flux cleaned = 0.000889292 Jy ! Component: 150 - total flux cleaned = 0.000953155 Jy ! Component: 200 - total flux cleaned = 0.000969587 Jy ! Total flux subtracted in 200 components = 0.000969587 Jy ! Clean residual min=-0.003912 max=0.003095 Jy/beam ! Clean residual mean=-0.000009 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.220374 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.43354e-07 Jy ! Component: 100 - total flux cleaned = -3.60852e-07 Jy ! Component: 150 - total flux cleaned = -5.13525e-07 Jy ! Component: 200 - total flux cleaned = 9.86961e-08 Jy ! Total flux subtracted in 200 components = 9.86961e-08 Jy ! Clean residual min=-0.003905 max=0.003070 Jy/beam ! Clean residual mean=-0.000009 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.220374 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.220374 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.374 mas, bmaj=7.853 mas, bpa=-2.201 degrees ! Estimated noise=1140.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.58999e-05 Jy ! Component: 100 - total flux cleaned = -8.06882e-05 Jy ! Component: 150 - total flux cleaned = -5.52265e-05 Jy ! Component: 200 - total flux cleaned = -3.4969e-05 Jy ! Total flux subtracted in 200 components = -3.4969e-05 Jy ! Clean residual min=-0.003193 max=0.002630 Jy/beam ! Clean residual mean=-0.000005 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.220339 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.220339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103354Jy sigma=0.000670 ! Fit after self-cal, rms=0.103351Jy sigma=0.000670 wmodel J1059-1134_S_2017_05_01_pus_map.mod ! Writing 57 model components to file: J1059-1134_S_2017_05_01_pus_map.mod wobs J1059-1134_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1059-1134_S_2017_05_01_pus_uvs.fits wwins J1059-1134_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1059-1134_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110805 Jy ! Component: 100 - total flux cleaned = -0.00144791 Jy ! Component: 150 - total flux cleaned = -0.00135683 Jy ! Component: 200 - total flux cleaned = -0.0014451 Jy ! Component: 250 - total flux cleaned = -0.00136053 Jy ! Component: 300 - total flux cleaned = -0.00123948 Jy ! Component: 350 - total flux cleaned = -0.00127887 Jy ! Component: 400 - total flux cleaned = -0.00131626 Jy ! Component: 450 - total flux cleaned = -0.00124181 Jy ! Component: 500 - total flux cleaned = -0.00127862 Jy ! Component: 550 - total flux cleaned = -0.00134898 Jy ! Component: 600 - total flux cleaned = -0.0015538 Jy ! Component: 650 - total flux cleaned = -0.00158736 Jy ! Component: 700 - total flux cleaned = -0.00171888 Jy ! Component: 750 - total flux cleaned = -0.00184665 Jy ! Component: 800 - total flux cleaned = -0.00187753 Jy ! Component: 850 - total flux cleaned = -0.00196959 Jy ! Component: 900 - total flux cleaned = -0.00196911 Jy ! Component: 950 - total flux cleaned = -0.00199866 Jy ! Component: 1000 - total flux cleaned = -0.00191047 Jy ! Component: 1050 - total flux cleaned = -0.00194019 Jy ! Component: 1100 - total flux cleaned = -0.00191208 Jy ! Component: 1150 - total flux cleaned = -0.00182808 Jy ! Component: 1200 - total flux cleaned = -0.0017725 Jy ! Component: 1250 - total flux cleaned = -0.00158195 Jy ! Component: 1300 - total flux cleaned = -0.00147475 Jy ! Component: 1350 - total flux cleaned = -0.0013429 Jy ! Component: 1400 - total flux cleaned = -0.00126482 Jy ! Component: 1450 - total flux cleaned = -0.00116199 Jy ! Component: 1500 - total flux cleaned = -0.00103561 Jy ! Component: 1550 - total flux cleaned = -0.000960595 Jy ! Component: 1600 - total flux cleaned = -0.000787633 Jy ! Component: 1650 - total flux cleaned = -0.000812452 Jy ! Component: 1700 - total flux cleaned = -0.000715762 Jy ! Component: 1750 - total flux cleaned = -0.000571894 Jy ! Component: 1800 - total flux cleaned = -0.000477582 Jy ! Component: 1850 - total flux cleaned = -0.000453875 Jy ! Component: 1900 - total flux cleaned = -0.000361259 Jy ! Component: 1950 - total flux cleaned = -0.000338149 Jy ! Component: 2000 - total flux cleaned = -0.000225078 Jy ! Component: 2050 - total flux cleaned = -9.09484e-05 Jy ! Component: 2100 - total flux cleaned = -6.8947e-05 Jy ! Component: 2150 - total flux cleaned = -2.50001e-05 Jy ! Component: 2200 - total flux cleaned = -3.24904e-06 Jy ! Component: 2250 - total flux cleaned = -3.14889e-06 Jy ! Component: 2300 - total flux cleaned = 8.17345e-05 Jy ! Component: 2350 - total flux cleaned = 1.88378e-05 Jy ! Component: 2400 - total flux cleaned = 3.97784e-05 Jy ! Component: 2450 - total flux cleaned = 3.99816e-05 Jy ! Component: 2500 - total flux cleaned = 0.000121765 Jy ! Component: 2550 - total flux cleaned = 0.000101322 Jy ! Component: 2600 - total flux cleaned = 0.000141342 Jy ! Component: 2650 - total flux cleaned = 0.000180841 Jy ! Component: 2700 - total flux cleaned = 0.000161137 Jy ! Component: 2750 - total flux cleaned = 0.000141496 Jy ! Component: 2800 - total flux cleaned = 0.00016076 Jy ! Component: 2850 - total flux cleaned = 0.000141726 Jy ! Component: 2900 - total flux cleaned = 0.000179675 Jy ! Component: 2950 - total flux cleaned = 0.00012342 Jy ! Component: 3000 - total flux cleaned = 0.000160545 Jy ! Component: 3050 - total flux cleaned = 0.000160465 Jy ! Component: 3100 - total flux cleaned = 0.000178718 Jy ! Component: 3150 - total flux cleaned = 0.000178616 Jy ! Component: 3200 - total flux cleaned = 0.000160864 Jy ! Component: 3250 - total flux cleaned = 0.000178779 Jy ! Component: 3300 - total flux cleaned = 0.000214372 Jy ! Component: 3350 - total flux cleaned = 0.000196845 Jy ! Component: 3400 - total flux cleaned = 0.000162176 Jy ! Component: 3450 - total flux cleaned = 0.000231405 Jy ! Component: 3500 - total flux cleaned = 0.000179868 Jy ! Component: 3550 - total flux cleaned = 0.00019703 Jy ! Component: 3600 - total flux cleaned = 0.000163195 Jy ! Component: 3650 - total flux cleaned = 0.000247107 Jy ! Component: 3700 - total flux cleaned = 0.000296852 Jy ! Component: 3750 - total flux cleaned = 0.000296702 Jy ! Component: 3800 - total flux cleaned = 0.000313151 Jy ! Component: 3850 - total flux cleaned = 0.000313417 Jy ! Component: 3900 - total flux cleaned = 0.000362188 Jy ! Component: 3950 - total flux cleaned = 0.000394323 Jy ! Component: 4000 - total flux cleaned = 0.000474605 Jy ! Component: 4050 - total flux cleaned = 0.000474566 Jy ! Total flux subtracted in 4096 components = 0.000459013 Jy ! Clean residual min=-0.001004 max=0.000824 Jy/beam ! Clean residual mean=-0.000000 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.220798 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 344 components and 0.220798 Jy ![Exited script file: muppet] wmap "J1059-1134_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.374 x 7.853 at -2.201 degrees (North through East) ! Clean map min=-0.0019993 max=0.20807 Jy/beam ! Writing clean map to FITS file: J1059-1134_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.208065 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000294015 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.423928 0.423928 0.847855 1.69571 3.39142 6.78284 13.5657 27.1314 54.2627 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.208 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.374 x 7.853 at -2.201 degrees (North through East) ! Clean map min=-0.0019993 max=0.20807 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1059-1134_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:34:00 2019