! Started logfile: J1058+8114_S_2017_10_09_pus_uvs.log on Sun May 12 13:10:30 2019 obs J1058+8114_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1058+8114_S_2017_10_09_pus_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.655556 visibilities/baseline/integration-bin. ! Found source: J1058+8114 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1058+8114_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.711987Jy sigma=0.005842 ! Fit after self-cal, rms=0.705981Jy sigma=0.005797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.728 mas, bmaj=6.477 mas, bpa=0.8854 degrees ! Estimated noise=2228.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228138 Jy ! Component: 100 - total flux cleaned = 0.278172 Jy ! Total flux subtracted in 100 components = 0.278172 Jy ! Clean residual min=-0.012227 max=0.015834 Jy/beam ! Clean residual mean=-0.000109 rms=0.002827 Jy/beam ! Combined flux in latest and established models = 0.278172 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.278172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106575Jy sigma=0.000760 ! Fit after self-cal, rms=0.106577Jy sigma=0.000760 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.518 mas, bpa=2.18 degrees ! Estimated noise=1904.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217565 Jy ! Component: 100 - total flux cleaned = 0.0309801 Jy ! Component: 150 - total flux cleaned = 0.0350943 Jy ! Component: 200 - total flux cleaned = 0.0364758 Jy ! Total flux subtracted in 200 components = 0.0364758 Jy ! Clean residual min=-0.010450 max=0.011729 Jy/beam ! Clean residual mean=-0.000127 rms=0.002480 Jy/beam ! Combined flux in latest and established models = 0.314648 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 20 components and 0.314648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102021Jy sigma=0.000729 ! Fit after self-cal, rms=0.102008Jy sigma=0.000729 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.99 KP 1.06 ! LA 1.03 MK 0.97 NL 0.99 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 1.01 KP 1.01 ! LA 1.02 MK 0.97 NL 2.26 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.09 HN 1.03 KP 0.87 ! LA 0.78 MK 1.03 NL 1.19 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.00 KP 1.00* ! LA 0.77 MK 1.06 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.102008Jy sigma=0.000729 ! Fit after self-cal, rms=0.098466Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=7.536 mas, bpa=1.935 degrees ! Estimated noise=1909.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292271 Jy ! Component: 100 - total flux cleaned = -0.000601919 Jy ! Component: 150 - total flux cleaned = -0.00060044 Jy ! Component: 200 - total flux cleaned = -0.000631876 Jy ! Total flux subtracted in 200 components = -0.000631876 Jy ! Clean residual min=-0.005975 max=0.005141 Jy/beam ! Clean residual mean=-0.000065 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.314016 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 27 components and 0.314016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098420Jy sigma=0.000663 ! Fit after self-cal, rms=0.098530Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098530Jy sigma=0.000662 ! Fit after self-cal, rms=0.097375Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=7.551 mas, bpa=1.86 degrees ! Estimated noise=1909.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248766 Jy ! Component: 100 - total flux cleaned = 0.000247623 Jy ! Component: 150 - total flux cleaned = 0.000284062 Jy ! Component: 200 - total flux cleaned = 0.00028617 Jy ! Total flux subtracted in 200 components = 0.00028617 Jy ! Clean residual min=-0.004970 max=0.004304 Jy/beam ! Clean residual mean=-0.000023 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.314302 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.314302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097329Jy sigma=0.000647 ! Fit after self-cal, rms=0.097366Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125218 Jy ! Component: 100 - total flux cleaned = 9.75246e-05 Jy ! Component: 150 - total flux cleaned = 9.85541e-05 Jy ! Component: 200 - total flux cleaned = 9.96703e-05 Jy ! Total flux subtracted in 200 components = 9.96703e-05 Jy ! Clean residual min=-0.004967 max=0.004283 Jy/beam ! Clean residual mean=-0.000023 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.314402 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.314402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097343Jy sigma=0.000647 ! Fit after self-cal, rms=0.097346Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097346Jy sigma=0.000647 ! Fit after self-cal, rms=0.097346Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=7.552 mas, bpa=1.774 degrees ! Estimated noise=1908.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.2639e-05 Jy ! Component: 100 - total flux cleaned = -9.20626e-05 Jy ! Component: 150 - total flux cleaned = -9.29225e-05 Jy ! Component: 200 - total flux cleaned = -0.000117962 Jy ! Total flux subtracted in 200 components = -0.000117962 Jy ! Clean residual min=-0.004926 max=0.004247 Jy/beam ! Clean residual mean=-0.000022 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.314284 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.314284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097320Jy sigma=0.000647 ! Fit after self-cal, rms=0.097324Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.17938e-06 Jy ! Component: 100 - total flux cleaned = 2.93989e-05 Jy ! Component: 150 - total flux cleaned = 5.3101e-05 Jy ! Component: 200 - total flux cleaned = 3.35193e-05 Jy ! Total flux subtracted in 200 components = 3.35193e-05 Jy ! Clean residual min=-0.004915 max=0.004242 Jy/beam ! Clean residual mean=-0.000022 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.314317 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.314317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097308Jy sigma=0.000647 ! Fit after self-cal, rms=0.097310Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097310Jy sigma=0.000647 ! Fit after self-cal, rms=0.097294Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.199 mas, bmaj=12 mas, bpa=-8.173 degrees ! Estimated noise=2453.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003879 Jy ! Component: 100 - total flux cleaned = 0.000350523 Jy ! Component: 150 - total flux cleaned = 0.000306354 Jy ! Component: 200 - total flux cleaned = 0.000294348 Jy ! Total flux subtracted in 200 components = 0.000294348 Jy ! Clean residual min=-0.004650 max=0.006095 Jy/beam ! Clean residual mean=-0.000041 rms=0.001434 Jy/beam ! Combined flux in latest and established models = 0.314612 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.314612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097286Jy sigma=0.000647 ! Fit after self-cal, rms=0.097288Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-88.5, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425608 Jy ! Component: 100 - total flux cleaned = 0.00431338 Jy ! Component: 150 - total flux cleaned = 0.00422456 Jy ! Component: 200 - total flux cleaned = 0.00422 Jy ! Total flux subtracted in 200 components = 0.00422 Jy ! Clean residual min=-0.003583 max=0.003981 Jy/beam ! Clean residual mean=-0.000052 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.318832 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 88 components and 0.318832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097072Jy sigma=0.000645 ! Fit after self-cal, rms=0.097057Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.555 mas, bpa=1.719 degrees ! Estimated noise=1908.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 7.555 at 1.719 degrees (North through East) ! Clean map min=-0.0039825 max=0.29653 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=6.519 mas, bpa=0.4742 degrees ! Estimated noise=2250.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229184 Jy ! Component: 100 - total flux cleaned = 0.279443 Jy ! Component: 150 - total flux cleaned = 0.295383 Jy ! Component: 200 - total flux cleaned = 0.303534 Jy ! Total flux subtracted in 200 components = 0.303534 Jy ! Clean residual min=-0.005798 max=0.005462 Jy/beam ! Clean residual mean=-0.000026 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.303535 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.303535 Jy ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.555 mas, bpa=1.719 degrees ! Estimated noise=1908.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064673 Jy ! Component: 100 - total flux cleaned = 0.00940484 Jy ! Component: 150 - total flux cleaned = 0.0116694 Jy ! Component: 200 - total flux cleaned = 0.0135006 Jy ! Total flux subtracted in 200 components = 0.0135006 Jy ! Clean residual min=-0.004779 max=0.004134 Jy/beam ! Clean residual mean=-0.000028 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.317035 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 47 components and 0.317035 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.199 mas, bmaj=12 mas, bpa=-8.173 degrees ! Estimated noise=2453.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306469 Jy ! Component: 100 - total flux cleaned = 0.00334607 Jy ! Component: 150 - total flux cleaned = 0.00357727 Jy ! Component: 200 - total flux cleaned = 0.00378222 Jy ! Total flux subtracted in 200 components = 0.00378222 Jy ! Clean residual min=-0.003518 max=0.004043 Jy/beam ! Clean residual mean=-0.000042 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.320817 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119735 Jy ! Component: 100 - total flux cleaned = -0.000174045 Jy ! Component: 150 - total flux cleaned = -0.000174278 Jy ! Component: 200 - total flux cleaned = -0.000224677 Jy ! Total flux subtracted in 200 components = -0.000224677 Jy ! Clean residual min=-0.003271 max=0.003948 Jy/beam ! Clean residual mean=-0.000040 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.320593 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 118 components and 0.320593 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=7.555 mas, bpa=1.719 degrees ! Estimated noise=1908.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.27305e-05 Jy ! Component: 100 - total flux cleaned = 0.000340331 Jy ! Component: 150 - total flux cleaned = 0.000555483 Jy ! Component: 200 - total flux cleaned = 0.000689404 Jy ! Total flux subtracted in 200 components = 0.000689404 Jy ! Clean residual min=-0.003672 max=0.003708 Jy/beam ! Clean residual mean=-0.000017 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 0.321282 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 145 components and 0.321282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096791Jy sigma=0.000643 ! Fit after self-cal, rms=0.096780Jy sigma=0.000642 wmodel J1058+8114_S_2017_10_09_pus_map.mod ! Writing 145 model components to file: J1058+8114_S_2017_10_09_pus_map.mod wobs J1058+8114_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1058+8114_S_2017_10_09_pus_uvs.fits wwins J1058+8114_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J1058+8114_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103647 Jy ! Component: 100 - total flux cleaned = -0.00155411 Jy ! Component: 150 - total flux cleaned = -0.0019858 Jy ! Component: 200 - total flux cleaned = -0.00234274 Jy ! Component: 250 - total flux cleaned = -0.00245793 Jy ! Component: 300 - total flux cleaned = -0.00262406 Jy ! Component: 350 - total flux cleaned = -0.00283986 Jy ! Component: 400 - total flux cleaned = -0.0030511 Jy ! Component: 450 - total flux cleaned = -0.00346367 Jy ! Component: 500 - total flux cleaned = -0.00376451 Jy ! Component: 550 - total flux cleaned = -0.00391146 Jy ! Component: 600 - total flux cleaned = -0.00410352 Jy ! Component: 650 - total flux cleaned = -0.00429007 Jy ! Component: 700 - total flux cleaned = -0.00442702 Jy ! Component: 750 - total flux cleaned = -0.00456121 Jy ! Component: 800 - total flux cleaned = -0.00473608 Jy ! Component: 850 - total flux cleaned = -0.00473581 Jy ! Component: 900 - total flux cleaned = -0.00486412 Jy ! Component: 950 - total flux cleaned = -0.00490663 Jy ! Component: 1000 - total flux cleaned = -0.00515377 Jy ! Component: 1050 - total flux cleaned = -0.00519478 Jy ! Component: 1100 - total flux cleaned = -0.00523423 Jy ! Component: 1150 - total flux cleaned = -0.00531309 Jy ! Component: 1200 - total flux cleaned = -0.00531331 Jy ! Component: 1250 - total flux cleaned = -0.00546617 Jy ! Component: 1300 - total flux cleaned = -0.00550344 Jy ! Component: 1350 - total flux cleaned = -0.00542848 Jy ! Component: 1400 - total flux cleaned = -0.00539183 Jy ! Component: 1450 - total flux cleaned = -0.00531995 Jy ! Component: 1500 - total flux cleaned = -0.00521235 Jy ! Component: 1550 - total flux cleaned = -0.00514181 Jy ! Component: 1600 - total flux cleaned = -0.00514152 Jy ! Component: 1650 - total flux cleaned = -0.00496929 Jy ! Component: 1700 - total flux cleaned = -0.00493514 Jy ! Component: 1750 - total flux cleaned = -0.00476697 Jy ! Component: 1800 - total flux cleaned = -0.00470008 Jy ! Component: 1850 - total flux cleaned = -0.00456924 Jy ! Component: 1900 - total flux cleaned = -0.00447194 Jy ! Component: 1950 - total flux cleaned = -0.00434397 Jy ! Component: 2000 - total flux cleaned = -0.00437546 Jy ! Component: 2050 - total flux cleaned = -0.00428087 Jy ! Component: 2100 - total flux cleaned = -0.00412529 Jy ! Component: 2150 - total flux cleaned = -0.00403296 Jy ! Component: 2200 - total flux cleaned = -0.00394151 Jy ! Component: 2250 - total flux cleaned = -0.00373093 Jy ! Component: 2300 - total flux cleaned = -0.00370071 Jy ! Component: 2350 - total flux cleaned = -0.00361229 Jy ! Component: 2400 - total flux cleaned = -0.00334966 Jy ! Component: 2450 - total flux cleaned = -0.00337881 Jy ! Component: 2500 - total flux cleaned = -0.00335019 Jy ! Component: 2550 - total flux cleaned = -0.00315165 Jy ! Component: 2600 - total flux cleaned = -0.00309568 Jy ! Component: 2650 - total flux cleaned = -0.00309567 Jy ! Component: 2700 - total flux cleaned = -0.00306789 Jy ! Component: 2750 - total flux cleaned = -0.00284945 Jy ! Component: 2800 - total flux cleaned = -0.00282265 Jy ! Component: 2850 - total flux cleaned = -0.0029033 Jy ! Component: 2900 - total flux cleaned = -0.00285014 Jy ! Component: 2950 - total flux cleaned = -0.00287617 Jy ! Component: 3000 - total flux cleaned = -0.00282338 Jy ! Component: 3050 - total flux cleaned = -0.0028235 Jy ! Component: 3100 - total flux cleaned = -0.002952 Jy ! Component: 3150 - total flux cleaned = -0.00292616 Jy ! Component: 3200 - total flux cleaned = -0.00300205 Jy ! Component: 3250 - total flux cleaned = -0.00297679 Jy ! Component: 3300 - total flux cleaned = -0.00305153 Jy ! Component: 3350 - total flux cleaned = -0.0030267 Jy ! Component: 3400 - total flux cleaned = -0.00295308 Jy ! Component: 3450 - total flux cleaned = -0.00305057 Jy ! Component: 3500 - total flux cleaned = -0.00302631 Jy ! Component: 3550 - total flux cleaned = -0.00297851 Jy ! Component: 3600 - total flux cleaned = -0.00300259 Jy ! Component: 3650 - total flux cleaned = -0.0030734 Jy ! Component: 3700 - total flux cleaned = -0.00305019 Jy ! Component: 3750 - total flux cleaned = -0.00309694 Jy ! Component: 3800 - total flux cleaned = -0.00314354 Jy ! Component: 3850 - total flux cleaned = -0.00330409 Jy ! Component: 3900 - total flux cleaned = -0.00328121 Jy ! Component: 3950 - total flux cleaned = -0.0033042 Jy ! Component: 4000 - total flux cleaned = -0.00334927 Jy ! Component: 4050 - total flux cleaned = -0.00339396 Jy ! Total flux subtracted in 4096 components = -0.00339403 Jy ! Clean residual min=-0.001437 max=0.001281 Jy/beam ! Clean residual mean=-0.000003 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.317888 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 425 components and 0.317888 Jy ![Exited script file: muppet] wmap "J1058+8114_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 7.555 at 1.719 degrees (North through East) ! Clean map min=-0.0026107 max=0.29595 Jy/beam ! Writing clean map to FITS file: J1058+8114_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.295951 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000404507 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.410041 0.410041 0.820082 1.64016 3.28033 6.56065 13.1213 26.2426 52.4852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.295 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.336 x 7.555 at 1.719 degrees (North through East) ! Clean map min=-0.0026107 max=0.29595 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1058+8114_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:10:34 2019