! Started logfile: J1058+1951_S_2017_01_21_pus_uvs.log on Sun May 5 15:53:05 2019 obs J1058+1951_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1058+1951_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.63499 visibilities/baseline/integration-bin. ! Found source: J1058+1951 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 10424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1058+1951_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 209 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.688247Jy sigma=0.005658 ! Fit after self-cal, rms=0.676853Jy sigma=0.005566 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=5.441 mas, bpa=-4.013 degrees ! Estimated noise=1251.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.252396 Jy ! Component: 100 - total flux cleaned = 0.320222 Jy ! Total flux subtracted in 100 components = 0.320222 Jy ! Clean residual min=-0.011356 max=0.028995 Jy/beam ! Clean residual mean=-0.000013 rms=0.003238 Jy/beam ! Combined flux in latest and established models = 0.320222 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.320222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104341Jy sigma=0.000775 ! Fit after self-cal, rms=0.104255Jy sigma=0.000774 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314302 Jy ! Component: 100 - total flux cleaned = 0.0465398 Jy ! Total flux subtracted in 100 components = 0.0465398 Jy ! Clean residual min=-0.006225 max=0.011103 Jy/beam ! Clean residual mean=-0.000005 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.366762 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 15 components and 0.366762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095481Jy sigma=0.000689 ! Fit after self-cal, rms=0.095374Jy sigma=0.000688 ! Inverting map ! Added new window around map position (-2, 9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103 Jy ! Component: 100 - total flux cleaned = 0.0153412 Jy ! Total flux subtracted in 100 components = 0.0153412 Jy ! Clean residual min=-0.005344 max=0.006469 Jy/beam ! Clean residual mean=-0.000003 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.382103 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.382103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094383Jy sigma=0.000680 ! Fit after self-cal, rms=0.094348Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=6.275 mas, bpa=-2.946 degrees ! Estimated noise=917.161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117745 Jy ! Component: 100 - total flux cleaned = 0.000745727 Jy ! Component: 150 - total flux cleaned = 0.000742767 Jy ! Component: 200 - total flux cleaned = 0.000688663 Jy ! Total flux subtracted in 200 components = 0.000688663 Jy ! Clean residual min=-0.004802 max=0.005710 Jy/beam ! Clean residual mean=-0.000013 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.382792 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 37 components and 0.382791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094159Jy sigma=0.000678 ! Fit after self-cal, rms=0.094157Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.95 LA 1.03 ! MK 1.00 NL 0.98 OV 1.03 PT 0.98 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.99 LA 0.99 ! MK 0.97 NL 1.02 OV 1.06 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.99 LA 1.02 ! MK 1.02 NL 1.00 OV 0.96 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.98 LA 0.99 ! MK 1.02 NL 1.00* OV 1.04 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.094157Jy sigma=0.000678 ! Fit after self-cal, rms=0.094069Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=6.263 mas, bpa=-2.967 degrees ! Estimated noise=916.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.9542e-05 Jy ! Component: 100 - total flux cleaned = 0.000163901 Jy ! Component: 150 - total flux cleaned = 0.000353389 Jy ! Component: 200 - total flux cleaned = 0.000538613 Jy ! Total flux subtracted in 200 components = 0.000538613 Jy ! Clean residual min=-0.003711 max=0.004106 Jy/beam ! Clean residual mean=-0.000012 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.38333 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.38333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094006Jy sigma=0.000669 ! Fit after self-cal, rms=0.094033Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094033Jy sigma=0.000669 ! Fit after self-cal, rms=0.092823Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=6.255 mas, bpa=-2.946 degrees ! Estimated noise=916.991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.48904e-05 Jy ! Component: 100 - total flux cleaned = 0.000130668 Jy ! Component: 150 - total flux cleaned = 0.000374454 Jy ! Component: 200 - total flux cleaned = 0.000565411 Jy ! Total flux subtracted in 200 components = 0.000565411 Jy ! Clean residual min=-0.002609 max=0.002564 Jy/beam ! Clean residual mean=0.000011 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.383896 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.383895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092781Jy sigma=0.000658 ! Fit after self-cal, rms=0.092782Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.0758e-06 Jy ! Component: 100 - total flux cleaned = 7.49162e-06 Jy ! Component: 150 - total flux cleaned = 5.77892e-05 Jy ! Component: 200 - total flux cleaned = 0.000103821 Jy ! Total flux subtracted in 200 components = 0.000103821 Jy ! Clean residual min=-0.002463 max=0.002579 Jy/beam ! Clean residual mean=0.000011 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.383999 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 69 components and 0.383999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092773Jy sigma=0.000658 ! Fit after self-cal, rms=0.092771Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092771Jy sigma=0.000658 ! Fit after self-cal, rms=0.092824Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=6.246 mas, bpa=-2.915 degrees ! Estimated noise=917.624 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475687 Jy ! Component: 100 - total flux cleaned = 0.000721851 Jy ! Component: 150 - total flux cleaned = 0.000941362 Jy ! Component: 200 - total flux cleaned = 0.00111871 Jy ! Total flux subtracted in 200 components = 0.00111871 Jy ! Clean residual min=-0.002479 max=0.002483 Jy/beam ! Clean residual mean=0.000009 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.385118 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.385118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092797Jy sigma=0.000657 ! Fit after self-cal, rms=0.092794Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100715 Jy ! Component: 100 - total flux cleaned = 0.000183285 Jy ! Component: 150 - total flux cleaned = 0.00025836 Jy ! Component: 200 - total flux cleaned = 0.000292618 Jy ! Total flux subtracted in 200 components = 0.000292618 Jy ! Clean residual min=-0.002396 max=0.002496 Jy/beam ! Clean residual mean=0.000009 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.385411 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.385411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092790Jy sigma=0.000657 ! Fit after self-cal, rms=0.092789Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092789Jy sigma=0.000657 ! Fit after self-cal, rms=0.092961Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.507 mas, bmaj=9.711 mas, bpa=0.3262 degrees ! Estimated noise=1227.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114697 Jy ! Component: 100 - total flux cleaned = 0.00159677 Jy ! Component: 150 - total flux cleaned = 0.00172611 Jy ! Component: 200 - total flux cleaned = 0.00176687 Jy ! Total flux subtracted in 200 components = 0.00176687 Jy ! Clean residual min=-0.003459 max=0.003445 Jy/beam ! Clean residual mean=0.000020 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.387178 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.387178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092948Jy sigma=0.000657 ! Fit after self-cal, rms=0.092948Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14717e-05 Jy ! Component: 100 - total flux cleaned = 7.48213e-05 Jy ! Component: 150 - total flux cleaned = 0.000101555 Jy ! Component: 200 - total flux cleaned = 0.000126601 Jy ! Total flux subtracted in 200 components = 0.000126601 Jy ! Clean residual min=-0.003447 max=0.003428 Jy/beam ! Clean residual mean=0.000020 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.387304 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 93 components and 0.387304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092949Jy sigma=0.000657 ! Fit after self-cal, rms=0.092949Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.237 mas, bpa=-2.887 degrees ! Estimated noise=918.519 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 6.237 at -2.887 degrees (North through East) ! Clean map min=-0.0022345 max=0.32832 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=5.428 mas, bpa=-3.799 degrees ! Estimated noise=1245.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250938 Jy ! Component: 100 - total flux cleaned = 0.321004 Jy ! Component: 150 - total flux cleaned = 0.353149 Jy ! Component: 200 - total flux cleaned = 0.368423 Jy ! Total flux subtracted in 200 components = 0.368423 Jy ! Clean residual min=-0.004275 max=0.007026 Jy/beam ! Clean residual mean=0.000002 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.368422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.368422 Jy ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.237 mas, bpa=-2.887 degrees ! Estimated noise=918.519 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00888086 Jy ! Component: 100 - total flux cleaned = 0.0136054 Jy ! Component: 150 - total flux cleaned = 0.0164241 Jy ! Component: 200 - total flux cleaned = 0.0172928 Jy ! Total flux subtracted in 200 components = 0.0172928 Jy ! Clean residual min=-0.002768 max=0.002398 Jy/beam ! Clean residual mean=0.000008 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.385715 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 49 components and 0.385715 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.507 mas, bmaj=9.711 mas, bpa=0.3262 degrees ! Estimated noise=1227.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156184 Jy ! Component: 100 - total flux cleaned = 0.00194944 Jy ! Component: 150 - total flux cleaned = 0.00207902 Jy ! Component: 200 - total flux cleaned = 0.00209573 Jy ! Total flux subtracted in 200 components = 0.00209573 Jy ! Clean residual min=-0.003317 max=0.003380 Jy/beam ! Clean residual mean=0.000021 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.387811 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.47215e-05 Jy ! Component: 100 - total flux cleaned = 2.09266e-06 Jy ! Component: 150 - total flux cleaned = -9.46177e-06 Jy ! Component: 200 - total flux cleaned = -1.93074e-05 Jy ! Total flux subtracted in 200 components = -1.93074e-05 Jy ! Clean residual min=-0.003338 max=0.003375 Jy/beam ! Clean residual mean=0.000021 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.387792 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.387792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.237 mas, bpa=-2.887 degrees ! Estimated noise=918.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.89332e-06 Jy ! Component: 100 - total flux cleaned = -3.16209e-05 Jy ! Component: 150 - total flux cleaned = -8.39991e-05 Jy ! Component: 200 - total flux cleaned = -8.35761e-05 Jy ! Total flux subtracted in 200 components = -8.35761e-05 Jy ! Clean residual min=-0.002426 max=0.002460 Jy/beam ! Clean residual mean=0.000009 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.387708 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.387708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092968Jy sigma=0.000657 ! Fit after self-cal, rms=0.092960Jy sigma=0.000657 wmodel J1058+1951_S_2017_01_21_pus_map.mod ! Writing 76 model components to file: J1058+1951_S_2017_01_21_pus_map.mod wobs J1058+1951_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1058+1951_S_2017_01_21_pus_uvs.fits wwins J1058+1951_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1058+1951_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188702 Jy ! Component: 100 - total flux cleaned = 0.000268363 Jy ! Component: 150 - total flux cleaned = 0.000267893 Jy ! Component: 200 - total flux cleaned = 0.000379369 Jy ! Component: 250 - total flux cleaned = 0.000486806 Jy ! Component: 300 - total flux cleaned = 0.000521884 Jy ! Component: 350 - total flux cleaned = 0.00055574 Jy ! Component: 400 - total flux cleaned = 0.000654048 Jy ! Component: 450 - total flux cleaned = 0.000717984 Jy ! Component: 500 - total flux cleaned = 0.000780363 Jy ! Component: 550 - total flux cleaned = 0.000902907 Jy ! Component: 600 - total flux cleaned = 0.000932952 Jy ! Component: 650 - total flux cleaned = 0.001021 Jy ! Component: 700 - total flux cleaned = 0.001137 Jy ! Component: 750 - total flux cleaned = 0.0012793 Jy ! Component: 800 - total flux cleaned = 0.00133477 Jy ! Component: 850 - total flux cleaned = 0.00144481 Jy ! Component: 900 - total flux cleaned = 0.00157966 Jy ! Component: 950 - total flux cleaned = 0.0016586 Jy ! Component: 1000 - total flux cleaned = 0.00168396 Jy ! Component: 1050 - total flux cleaned = 0.00165817 Jy ! Component: 1100 - total flux cleaned = 0.00173426 Jy ! Component: 1150 - total flux cleaned = 0.0018086 Jy ! Component: 1200 - total flux cleaned = 0.00180828 Jy ! Component: 1250 - total flux cleaned = 0.00178427 Jy ! Component: 1300 - total flux cleaned = 0.00183207 Jy ! Component: 1350 - total flux cleaned = 0.00187907 Jy ! Component: 1400 - total flux cleaned = 0.00192506 Jy ! Component: 1450 - total flux cleaned = 0.00190232 Jy ! Component: 1500 - total flux cleaned = 0.00192465 Jy ! Component: 1550 - total flux cleaned = 0.00190211 Jy ! Component: 1600 - total flux cleaned = 0.00192434 Jy ! Component: 1650 - total flux cleaned = 0.00192414 Jy ! Component: 1700 - total flux cleaned = 0.00194531 Jy ! Component: 1750 - total flux cleaned = 0.00192425 Jy ! Component: 1800 - total flux cleaned = 0.00198681 Jy ! Component: 1850 - total flux cleaned = 0.00204839 Jy ! Component: 1900 - total flux cleaned = 0.00202775 Jy ! Component: 1950 - total flux cleaned = 0.00206806 Jy ! Component: 2000 - total flux cleaned = 0.00206793 Jy ! Component: 2050 - total flux cleaned = 0.00202853 Jy ! Component: 2100 - total flux cleaned = 0.00197023 Jy ! Component: 2150 - total flux cleaned = 0.00197064 Jy ! Component: 2200 - total flux cleaned = 0.00200882 Jy ! Component: 2250 - total flux cleaned = 0.00191478 Jy ! Component: 2300 - total flux cleaned = 0.00187764 Jy ! Component: 2350 - total flux cleaned = 0.00178513 Jy ! Component: 2400 - total flux cleaned = 0.00165734 Jy ! Component: 2450 - total flux cleaned = 0.00165766 Jy ! Component: 2500 - total flux cleaned = 0.00155026 Jy ! Component: 2550 - total flux cleaned = 0.0015149 Jy ! Component: 2600 - total flux cleaned = 0.00137452 Jy ! Component: 2650 - total flux cleaned = 0.00134001 Jy ! Component: 2700 - total flux cleaned = 0.0013057 Jy ! Component: 2750 - total flux cleaned = 0.00127158 Jy ! Component: 2800 - total flux cleaned = 0.00118686 Jy ! Component: 2850 - total flux cleaned = 0.00115362 Jy ! Component: 2900 - total flux cleaned = 0.00113694 Jy ! Component: 2950 - total flux cleaned = 0.00102208 Jy ! Component: 3000 - total flux cleaned = 0.0010058 Jy ! Component: 3050 - total flux cleaned = 0.000989411 Jy ! Component: 3100 - total flux cleaned = 0.000909267 Jy ! Component: 3150 - total flux cleaned = 0.000814304 Jy ! Component: 3200 - total flux cleaned = 0.000845688 Jy ! Component: 3250 - total flux cleaned = 0.000798953 Jy ! Component: 3300 - total flux cleaned = 0.000783571 Jy ! Component: 3350 - total flux cleaned = 0.000768099 Jy ! Component: 3400 - total flux cleaned = 0.000707568 Jy ! Component: 3450 - total flux cleaned = 0.000722328 Jy ! Component: 3500 - total flux cleaned = 0.000692294 Jy ! Component: 3550 - total flux cleaned = 0.000662626 Jy ! Component: 3600 - total flux cleaned = 0.000647903 Jy ! Component: 3650 - total flux cleaned = 0.000618524 Jy ! Component: 3700 - total flux cleaned = 0.000603977 Jy ! Component: 3750 - total flux cleaned = 0.000532126 Jy ! Component: 3800 - total flux cleaned = 0.000546377 Jy ! Component: 3850 - total flux cleaned = 0.000517878 Jy ! Component: 3900 - total flux cleaned = 0.000475523 Jy ! Component: 3950 - total flux cleaned = 0.000503588 Jy ! Component: 4000 - total flux cleaned = 0.000475706 Jy ! Component: 4050 - total flux cleaned = 0.000461837 Jy ! Total flux subtracted in 4096 components = 0.000420727 Jy ! Clean residual min=-0.000876 max=0.000850 Jy/beam ! Clean residual mean=0.000002 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.388129 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 384 components and 0.388129 Jy ![Exited script file: muppet] wmap "J1058+1951_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 6.237 at -2.887 degrees (North through East) ! Clean map min=-0.0014987 max=0.32878 Jy/beam ! Writing clean map to FITS file: J1058+1951_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.32878 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000243263 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.221969 0.221969 0.443938 0.887876 1.77575 3.55151 7.10301 14.206 28.412 56.8241 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.328 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.07 x 6.237 at -2.887 degrees (North through East) ! Clean map min=-0.0014987 max=0.32878 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1058+1951_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:53:11 2019