! Started logfile: J1057-2433_S_2017_09_26_pus_uvs.log on Sat May 11 13:00:25 2019 obs J1057-2433_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1057-2433_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.51011 visibilities/baseline/integration-bin. ! Found source: J1057-2433 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 21596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1057-2433_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 853 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 733 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 719 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2219 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951616Jy sigma=0.006398 ! Fit after self-cal, rms=0.886405Jy sigma=0.005929 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.397 mas, bmaj=15.99 mas, bpa=-17.29 degrees ! Estimated noise=1974.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792489 Jy ! Component: 100 - total flux cleaned = 0.120371 Jy ! Total flux subtracted in 100 components = 0.120371 Jy ! Clean residual min=-0.016034 max=0.025064 Jy/beam ! Clean residual mean=-0.000504 rms=0.006987 Jy/beam ! Combined flux in latest and established models = 0.120371 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.120371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144437Jy sigma=0.001011 ! Fit after self-cal, rms=0.143440Jy sigma=0.001007 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=19.04 mas, bpa=-16.28 degrees ! Estimated noise=831.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626175 Jy ! Component: 100 - total flux cleaned = 0.101094 Jy ! Component: 150 - total flux cleaned = 0.125392 Jy ! Component: 200 - total flux cleaned = 0.141391 Jy ! Total flux subtracted in 200 components = 0.141391 Jy ! Clean residual min=-0.014288 max=0.026637 Jy/beam ! Clean residual mean=-0.000596 rms=0.007630 Jy/beam ! Combined flux in latest and established models = 0.261763 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 95 components and 0.261763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116651Jy sigma=0.000749 ! Fit after self-cal, rms=0.114234Jy sigma=0.000739 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.85 KP 1.07 ! LA 0.87 MK 1.08 NL 1.64 OV 1.17 ! PT 0.78 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.04 KP 1.00 ! LA 0.86 MK 1.03 NL 1.73 OV 1.21 ! PT 0.76 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 1.00 ! LA 0.87 MK 1.01 NL 1.63 OV 1.10 ! PT 0.76 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.59 KP 1.00* ! LA 0.78 MK 1.12 NL 1.00* OV 1.48 ! PT 0.81 ! ! ! Fit before self-cal, rms=0.114234Jy sigma=0.000739 ! Fit after self-cal, rms=0.129171Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=19.36 mas, bpa=-16.2 degrees ! Estimated noise=851.272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138509 Jy ! Component: 100 - total flux cleaned = 0.00174084 Jy ! Component: 150 - total flux cleaned = 0.00173779 Jy ! Component: 200 - total flux cleaned = 0.00165678 Jy ! Total flux subtracted in 200 components = 0.00165678 Jy ! Clean residual min=-0.008896 max=0.014422 Jy/beam ! Clean residual mean=-0.000112 rms=0.003334 Jy/beam ! Combined flux in latest and established models = 0.263419 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.263419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128948Jy sigma=0.000672 ! Fit after self-cal, rms=0.130871Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130871Jy sigma=0.000669 ! Fit after self-cal, rms=0.135797Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=19.48 mas, bpa=-16.11 degrees ! Estimated noise=843.201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289017 Jy ! Component: 100 - total flux cleaned = 0.000774241 Jy ! Component: 150 - total flux cleaned = 0.000926076 Jy ! Component: 200 - total flux cleaned = 0.00106086 Jy ! Total flux subtracted in 200 components = 0.00106086 Jy ! Clean residual min=-0.008373 max=0.011525 Jy/beam ! Clean residual mean=-0.000067 rms=0.003002 Jy/beam ! Combined flux in latest and established models = 0.26448 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.26448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135614Jy sigma=0.000665 ! Fit after self-cal, rms=0.136000Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.95957e-05 Jy ! Component: 100 - total flux cleaned = 3.06102e-05 Jy ! Component: 150 - total flux cleaned = 9.87109e-05 Jy ! Component: 200 - total flux cleaned = 0.000162206 Jy ! Total flux subtracted in 200 components = 0.000162206 Jy ! Clean residual min=-0.008242 max=0.011197 Jy/beam ! Clean residual mean=-0.000068 rms=0.002960 Jy/beam ! Combined flux in latest and established models = 0.264643 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 139 components and 0.264643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135865Jy sigma=0.000664 ! Fit after self-cal, rms=0.135851Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135851Jy sigma=0.000663 ! Fit after self-cal, rms=0.136804Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=19.75 mas, bpa=-16.02 degrees ! Estimated noise=818.143 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.93293e-05 Jy ! Component: 100 - total flux cleaned = 2.50631e-05 Jy ! Component: 150 - total flux cleaned = 2.96366e-05 Jy ! Component: 200 - total flux cleaned = 9.0939e-05 Jy ! Total flux subtracted in 200 components = 9.0939e-05 Jy ! Clean residual min=-0.008023 max=0.010801 Jy/beam ! Clean residual mean=-0.000042 rms=0.002761 Jy/beam ! Combined flux in latest and established models = 0.264733 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 150 components and 0.264733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136651Jy sigma=0.000661 ! Fit after self-cal, rms=0.136736Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380179 Jy ! Component: 100 - total flux cleaned = 0.000383751 Jy ! Component: 150 - total flux cleaned = 0.000385295 Jy ! Component: 200 - total flux cleaned = 0.000386941 Jy ! Total flux subtracted in 200 components = 0.000386941 Jy ! Clean residual min=-0.007840 max=0.010643 Jy/beam ! Clean residual mean=-0.000042 rms=0.002719 Jy/beam ! Combined flux in latest and established models = 0.26512 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 157 components and 0.26512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136618Jy sigma=0.000660 ! Fit after self-cal, rms=0.136528Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136528Jy sigma=0.000660 ! Fit after self-cal, rms=0.134543Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.891 mas, bmaj=38.91 mas, bpa=-6.487 degrees ! Estimated noise=942.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000976372 Jy ! Component: 100 - total flux cleaned = 0.0012574 Jy ! Component: 150 - total flux cleaned = 0.00147448 Jy ! Component: 200 - total flux cleaned = 0.00164599 Jy ! Total flux subtracted in 200 components = 0.00164599 Jy ! Clean residual min=-0.012041 max=0.015972 Jy/beam ! Clean residual mean=-0.000067 rms=0.004233 Jy/beam ! Combined flux in latest and established models = 0.266766 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 161 components and 0.266766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134421Jy sigma=0.000660 ! Fit after self-cal, rms=0.134091Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226136 Jy ! Component: 100 - total flux cleaned = 0.000417629 Jy ! Component: 150 - total flux cleaned = 0.000489931 Jy ! Component: 200 - total flux cleaned = 0.000555832 Jy ! Total flux subtracted in 200 components = 0.000555832 Jy ! Clean residual min=-0.011826 max=0.015326 Jy/beam ! Clean residual mean=-0.000066 rms=0.004120 Jy/beam ! Combined flux in latest and established models = 0.267322 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 162 components and 0.267322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134037Jy sigma=0.000659 ! Fit after self-cal, rms=0.133856Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=19.86 mas, bpa=-16.24 degrees ! Estimated noise=808.719 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 19.86 at -16.24 degrees (North through East) ! Clean map min=-0.007453 max=0.093979 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.326 mas, bmaj=17.07 mas, bpa=-17.11 degrees ! Estimated noise=1895.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0759207 Jy ! Component: 100 - total flux cleaned = 0.123275 Jy ! Component: 150 - total flux cleaned = 0.157182 Jy ! Component: 200 - total flux cleaned = 0.183044 Jy ! Total flux subtracted in 200 components = 0.183044 Jy ! Clean residual min=-0.013291 max=0.016165 Jy/beam ! Clean residual mean=-0.000230 rms=0.004281 Jy/beam ! Combined flux in latest and established models = 0.183044 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 72 model components to the UV plane model. ! The established model now contains 72 components and 0.183044 Jy ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=19.86 mas, bpa=-16.24 degrees ! Estimated noise=808.719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0346301 Jy ! Component: 100 - total flux cleaned = 0.055289 Jy ! Component: 150 - total flux cleaned = 0.0676516 Jy ! Component: 200 - total flux cleaned = 0.0750665 Jy ! Total flux subtracted in 200 components = 0.0750665 Jy ! Clean residual min=-0.008559 max=0.010625 Jy/beam ! Clean residual mean=-0.000084 rms=0.002886 Jy/beam ! Combined flux in latest and established models = 0.258111 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.258111 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.891 mas, bmaj=38.91 mas, bpa=-6.487 degrees ! Estimated noise=942.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760676 Jy ! Component: 100 - total flux cleaned = 0.00856488 Jy ! Component: 150 - total flux cleaned = 0.00912104 Jy ! Component: 200 - total flux cleaned = 0.00945806 Jy ! Total flux subtracted in 200 components = 0.00945806 Jy ! Clean residual min=-0.012024 max=0.015495 Jy/beam ! Clean residual mean=-0.000061 rms=0.004187 Jy/beam ! Combined flux in latest and established models = 0.267569 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205937 Jy ! Component: 100 - total flux cleaned = 0.000265628 Jy ! Component: 150 - total flux cleaned = 0.000264428 Jy ! Component: 200 - total flux cleaned = 0.000263518 Jy ! Total flux subtracted in 200 components = 0.000263518 Jy ! Clean residual min=-0.012005 max=0.015467 Jy/beam ! Clean residual mean=-0.000059 rms=0.004161 Jy/beam ! Combined flux in latest and established models = 0.267832 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 93 components and 0.267832 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=19.86 mas, bpa=-16.24 degrees ! Estimated noise=808.719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106134 Jy ! Component: 100 - total flux cleaned = -0.00117355 Jy ! Component: 150 - total flux cleaned = -0.00135864 Jy ! Component: 200 - total flux cleaned = -0.00144354 Jy ! Total flux subtracted in 200 components = -0.00144354 Jy ! Clean residual min=-0.007785 max=0.010352 Jy/beam ! Clean residual mean=-0.000035 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 0.266389 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 104 components and 0.266389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134170Jy sigma=0.000660 ! Fit after self-cal, rms=0.133799Jy sigma=0.000659 wmodel J1057-2433_S_2017_09_26_pus_map.mod ! Writing 104 model components to file: J1057-2433_S_2017_09_26_pus_map.mod wobs J1057-2433_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1057-2433_S_2017_09_26_pus_uvs.fits wwins J1057-2433_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1057-2433_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437435 Jy ! Component: 100 - total flux cleaned = 0.0063441 Jy ! Component: 150 - total flux cleaned = 0.00770112 Jy ! Component: 200 - total flux cleaned = 0.00883018 Jy ! Component: 250 - total flux cleaned = 0.00956484 Jy ! Component: 300 - total flux cleaned = 0.00995602 Jy ! Component: 350 - total flux cleaned = 0.0101434 Jy ! Component: 400 - total flux cleaned = 0.00997183 Jy ! Component: 450 - total flux cleaned = 0.0103033 Jy ! Component: 500 - total flux cleaned = 0.0103806 Jy ! Component: 550 - total flux cleaned = 0.0106022 Jy ! Component: 600 - total flux cleaned = 0.0106721 Jy ! Component: 650 - total flux cleaned = 0.0106027 Jy ! Component: 700 - total flux cleaned = 0.0106028 Jy ! Component: 750 - total flux cleaned = 0.0104155 Jy ! Component: 800 - total flux cleaned = 0.0104733 Jy ! Component: 850 - total flux cleaned = 0.0104172 Jy ! Component: 900 - total flux cleaned = 0.0103623 Jy ! Component: 950 - total flux cleaned = 0.0103105 Jy ! Component: 1000 - total flux cleaned = 0.0104648 Jy ! Component: 1050 - total flux cleaned = 0.0104145 Jy ! Component: 1100 - total flux cleaned = 0.0103667 Jy ! Component: 1150 - total flux cleaned = 0.0103677 Jy ! Component: 1200 - total flux cleaned = 0.0104583 Jy ! Component: 1250 - total flux cleaned = 0.0105469 Jy ! Component: 1300 - total flux cleaned = 0.0108479 Jy ! Component: 1350 - total flux cleaned = 0.0108897 Jy ! Component: 1400 - total flux cleaned = 0.0110524 Jy ! Component: 1450 - total flux cleaned = 0.0111305 Jy ! Component: 1500 - total flux cleaned = 0.0110913 Jy ! Component: 1550 - total flux cleaned = 0.0111666 Jy ! Component: 1600 - total flux cleaned = 0.0112759 Jy ! Component: 1650 - total flux cleaned = 0.0112758 Jy ! Component: 1700 - total flux cleaned = 0.0113821 Jy ! Component: 1750 - total flux cleaned = 0.0113825 Jy ! Component: 1800 - total flux cleaned = 0.0114173 Jy ! Component: 1850 - total flux cleaned = 0.0115158 Jy ! Component: 1900 - total flux cleaned = 0.0115795 Jy ! Component: 1950 - total flux cleaned = 0.0116426 Jy ! Component: 2000 - total flux cleaned = 0.0116417 Jy ! Component: 2050 - total flux cleaned = 0.0115491 Jy ! Component: 2100 - total flux cleaned = 0.0115195 Jy ! Component: 2150 - total flux cleaned = 0.0115489 Jy ! Component: 2200 - total flux cleaned = 0.0115487 Jy ! Component: 2250 - total flux cleaned = 0.0116914 Jy ! Component: 2300 - total flux cleaned = 0.0117469 Jy ! Component: 2350 - total flux cleaned = 0.0117475 Jy ! Component: 2400 - total flux cleaned = 0.0118572 Jy ! Component: 2450 - total flux cleaned = 0.0118847 Jy ! Component: 2500 - total flux cleaned = 0.0120445 Jy ! Component: 2550 - total flux cleaned = 0.0120447 Jy ! Component: 2600 - total flux cleaned = 0.0120704 Jy ! Component: 2650 - total flux cleaned = 0.0121217 Jy ! Component: 2700 - total flux cleaned = 0.0121979 Jy ! Component: 2750 - total flux cleaned = 0.0122732 Jy ! Component: 2800 - total flux cleaned = 0.0123729 Jy ! Component: 2850 - total flux cleaned = 0.0124223 Jy ! Component: 2900 - total flux cleaned = 0.0124468 Jy ! Component: 2950 - total flux cleaned = 0.0124711 Jy ! Component: 3000 - total flux cleaned = 0.0125434 Jy ! Component: 3050 - total flux cleaned = 0.012615 Jy ! Component: 3100 - total flux cleaned = 0.0125912 Jy ! Component: 3150 - total flux cleaned = 0.0125678 Jy ! Component: 3200 - total flux cleaned = 0.0127082 Jy ! Component: 3250 - total flux cleaned = 0.0127314 Jy ! Component: 3300 - total flux cleaned = 0.0127546 Jy ! Component: 3350 - total flux cleaned = 0.0128695 Jy ! Component: 3400 - total flux cleaned = 0.0129607 Jy ! Component: 3450 - total flux cleaned = 0.0130288 Jy ! Component: 3500 - total flux cleaned = 0.0131191 Jy ! Component: 3550 - total flux cleaned = 0.0131641 Jy ! Component: 3600 - total flux cleaned = 0.0132536 Jy ! Component: 3650 - total flux cleaned = 0.0132757 Jy ! Component: 3700 - total flux cleaned = 0.0132979 Jy ! Component: 3750 - total flux cleaned = 0.0133865 Jy ! Component: 3800 - total flux cleaned = 0.0133863 Jy ! Component: 3850 - total flux cleaned = 0.0134083 Jy ! Component: 3900 - total flux cleaned = 0.0134522 Jy ! Component: 3950 - total flux cleaned = 0.0134303 Jy ! Component: 4000 - total flux cleaned = 0.0134958 Jy ! Component: 4050 - total flux cleaned = 0.0135176 Jy ! Total flux subtracted in 4096 components = 0.0135611 Jy ! Clean residual min=-0.001205 max=0.001202 Jy/beam ! Clean residual mean=0.000007 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.27995 Jy keep ! Adding 487 model components to the UV plane model. ! The established model now contains 591 components and 0.27995 Jy ![Exited script file: muppet] wmap "J1057-2433_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 19.86 at -16.24 degrees (North through East) ! Clean map min=-0.003246 max=0.083659 Jy/beam ! Writing clean map to FITS file: J1057-2433_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.083659 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0004197 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.50504 1.50504 3.01008 6.02015 12.0403 24.0806 48.1612 96.3225 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 19.86 at -16.24 degrees (North through East) ! Clean map min=-0.003246 max=0.083659 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1057-2433_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:00:30 2019