! Started logfile: J1051+2119_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:38:54 2019 obs J1051+2119_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1051+2119_S_2017_03_27_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.746296 visibilities/baseline/integration-bin. ! Found source: J1051+2119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 4836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1051+2119_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.838606Jy sigma=0.007916 ! Fit after self-cal, rms=0.830867Jy sigma=0.007880 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=6.739 mas, bpa=1.592 degrees ! Estimated noise=1500.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129167 Jy ! Component: 100 - total flux cleaned = 0.181668 Jy ! Total flux subtracted in 100 components = 0.181668 Jy ! Clean residual min=-0.013909 max=0.036192 Jy/beam ! Clean residual mean=-0.000029 rms=0.004270 Jy/beam ! Combined flux in latest and established models = 0.181668 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.181668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116374Jy sigma=0.001038 ! Fit after self-cal, rms=0.115750Jy sigma=0.001032 ! Inverting map ! Added new window around map position (4.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385107 Jy ! Component: 100 - total flux cleaned = 0.0613684 Jy ! Total flux subtracted in 100 components = 0.0613684 Jy ! Clean residual min=-0.009553 max=0.020342 Jy/beam ! Clean residual mean=-0.000011 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.243036 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.243036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098695Jy sigma=0.000829 ! Fit after self-cal, rms=0.097319Jy sigma=0.000816 ! Inverting map ! Added new window around map position (9, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223913 Jy ! Component: 100 - total flux cleaned = 0.0364035 Jy ! Total flux subtracted in 100 components = 0.0364035 Jy ! Clean residual min=-0.007381 max=0.010772 Jy/beam ! Clean residual mean=0.000000 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 0.279439 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.279439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090838Jy sigma=0.000736 ! Fit after self-cal, rms=0.090309Jy sigma=0.000730 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=7.614 mas, bpa=2.171 degrees ! Estimated noise=1139.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154517 Jy ! Component: 100 - total flux cleaned = 0.0246388 Jy ! Component: 150 - total flux cleaned = 0.0310668 Jy ! Component: 200 - total flux cleaned = 0.0358411 Jy ! Total flux subtracted in 200 components = 0.0358411 Jy ! Clean residual min=-0.006020 max=0.007428 Jy/beam ! Clean residual mean=-0.000001 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.315281 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 86 components and 0.315281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087596Jy sigma=0.000694 ! Fit after self-cal, rms=0.087306Jy sigma=0.000691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.00 KP 1.01 ! LA 0.98 MK 1.03 NL 0.98 OV 1.01 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.04 KP 0.95 ! LA 0.96 MK 1.05 NL 1.04 OV 1.04 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.03 HN 1.01 KP 0.94 ! LA 0.97 MK 1.01 NL 1.03 OV 0.97 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.10 HN 1.03 KP 1.00* ! LA 0.94 MK 1.23 NL 1.00* OV 1.28 ! PT 0.96 SC 1.03 ! ! ! Fit before self-cal, rms=0.087306Jy sigma=0.000691 ! Fit after self-cal, rms=0.094584Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=7.641 mas, bpa=2.778 degrees ! Estimated noise=1135.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562906 Jy ! Component: 100 - total flux cleaned = 0.00641498 Jy ! Component: 150 - total flux cleaned = 0.00650521 Jy ! Component: 200 - total flux cleaned = 0.00634605 Jy ! Total flux subtracted in 200 components = 0.00634605 Jy ! Clean residual min=-0.004084 max=0.003739 Jy/beam ! Clean residual mean=-0.000000 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.321627 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 118 components and 0.321627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094257Jy sigma=0.000671 ! Fit after self-cal, rms=0.094374Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094374Jy sigma=0.000670 ! Fit after self-cal, rms=0.093493Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=7.634 mas, bpa=2.761 degrees ! Estimated noise=1137.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199977 Jy ! Component: 100 - total flux cleaned = 0.00259836 Jy ! Component: 150 - total flux cleaned = 0.00266099 Jy ! Component: 200 - total flux cleaned = 0.00282075 Jy ! Total flux subtracted in 200 components = 0.00282075 Jy ! Clean residual min=-0.003372 max=0.003414 Jy/beam ! Clean residual mean=-0.000006 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.324448 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 132 components and 0.324448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093376Jy sigma=0.000659 ! Fit after self-cal, rms=0.093330Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (87.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265759 Jy ! Component: 100 - total flux cleaned = 0.00372456 Jy ! Component: 150 - total flux cleaned = 0.00424589 Jy ! Component: 200 - total flux cleaned = 0.00464744 Jy ! Total flux subtracted in 200 components = 0.00464744 Jy ! Clean residual min=-0.003064 max=0.002593 Jy/beam ! Clean residual mean=-0.000001 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.329095 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 150 components and 0.329095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093179Jy sigma=0.000657 ! Fit after self-cal, rms=0.093183Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093183Jy sigma=0.000657 ! Fit after self-cal, rms=0.093470Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=7.628 mas, bpa=2.864 degrees ! Estimated noise=1134.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952537 Jy ! Component: 100 - total flux cleaned = 0.00143505 Jy ! Component: 150 - total flux cleaned = 0.00180877 Jy ! Component: 200 - total flux cleaned = 0.00200356 Jy ! Total flux subtracted in 200 components = 0.00200356 Jy ! Clean residual min=-0.002989 max=0.002603 Jy/beam ! Clean residual mean=0.000000 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.331099 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 162 components and 0.331099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093392Jy sigma=0.000656 ! Fit after self-cal, rms=0.093406Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000576923 Jy ! Component: 100 - total flux cleaned = 0.000809309 Jy ! Component: 150 - total flux cleaned = 0.000982949 Jy ! Component: 200 - total flux cleaned = 0.00110605 Jy ! Total flux subtracted in 200 components = 0.00110605 Jy ! Clean residual min=-0.002952 max=0.002668 Jy/beam ! Clean residual mean=0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.332205 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 168 components and 0.332205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093354Jy sigma=0.000655 ! Fit after self-cal, rms=0.093356Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093356Jy sigma=0.000655 ! Fit after self-cal, rms=0.093295Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.874 mas, bmaj=10.44 mas, bpa=-0.07722 degrees ! Estimated noise=1335.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122285 Jy ! Component: 100 - total flux cleaned = 0.00169537 Jy ! Component: 150 - total flux cleaned = 0.0018208 Jy ! Component: 200 - total flux cleaned = 0.00182026 Jy ! Total flux subtracted in 200 components = 0.00182026 Jy ! Clean residual min=-0.002782 max=0.003026 Jy/beam ! Clean residual mean=0.000007 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.334025 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 189 components and 0.334025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093272Jy sigma=0.000655 ! Fit after self-cal, rms=0.093281Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272446 Jy ! Component: 100 - total flux cleaned = 0.000408831 Jy ! Component: 150 - total flux cleaned = 0.000438474 Jy ! Component: 200 - total flux cleaned = 0.000439284 Jy ! Total flux subtracted in 200 components = 0.000439284 Jy ! Clean residual min=-0.002781 max=0.002982 Jy/beam ! Clean residual mean=0.000009 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.334464 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 215 components and 0.334464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093275Jy sigma=0.000655 ! Fit after self-cal, rms=0.093269Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=7.623 mas, bpa=2.924 degrees ! Estimated noise=1132.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.61 x 7.623 at 2.924 degrees (North through East) ! Clean map min=-0.0028186 max=0.15865 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=6.736 mas, bpa=2.507 degrees ! Estimated noise=1506.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129511 Jy ! Component: 100 - total flux cleaned = 0.189279 Jy ! Component: 150 - total flux cleaned = 0.227392 Jy ! Component: 200 - total flux cleaned = 0.252985 Jy ! Total flux subtracted in 200 components = 0.252985 Jy ! Clean residual min=-0.007826 max=0.013851 Jy/beam ! Clean residual mean=-0.000026 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.252985 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.252985 Jy ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=7.623 mas, bpa=2.924 degrees ! Estimated noise=1132.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227665 Jy ! Component: 100 - total flux cleaned = 0.0371685 Jy ! Component: 150 - total flux cleaned = 0.0469563 Jy ! Component: 200 - total flux cleaned = 0.0538958 Jy ! Total flux subtracted in 200 components = 0.0538958 Jy ! Clean residual min=-0.004328 max=0.003971 Jy/beam ! Clean residual mean=-0.000017 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.306881 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 89 components and 0.306881 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.874 mas, bmaj=10.44 mas, bpa=-0.07722 degrees ! Estimated noise=1335.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824921 Jy ! Component: 100 - total flux cleaned = 0.01384 Jy ! Component: 150 - total flux cleaned = 0.0179625 Jy ! Component: 200 - total flux cleaned = 0.0210593 Jy ! Total flux subtracted in 200 components = 0.0210593 Jy ! Clean residual min=-0.003645 max=0.002999 Jy/beam ! Clean residual mean=-0.000001 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.32794 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017404 Jy ! Component: 100 - total flux cleaned = 0.00290824 Jy ! Component: 150 - total flux cleaned = 0.00342873 Jy ! Component: 200 - total flux cleaned = 0.00393508 Jy ! Total flux subtracted in 200 components = 0.00393508 Jy ! Clean residual min=-0.003112 max=0.002739 Jy/beam ! Clean residual mean=0.000006 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.331875 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 181 components and 0.331875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=7.623 mas, bpa=2.924 degrees ! Estimated noise=1132.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633499 Jy ! Component: 100 - total flux cleaned = 0.000833031 Jy ! Component: 150 - total flux cleaned = 0.000950479 Jy ! Component: 200 - total flux cleaned = 0.00100723 Jy ! Total flux subtracted in 200 components = 0.00100723 Jy ! Clean residual min=-0.002992 max=0.002864 Jy/beam ! Clean residual mean=0.000003 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.332882 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 204 components and 0.332882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093260Jy sigma=0.000655 ! Fit after self-cal, rms=0.093285Jy sigma=0.000655 wmodel J1051+2119_S_2017_03_27_pus_map.mod ! Writing 204 model components to file: J1051+2119_S_2017_03_27_pus_map.mod wobs J1051+2119_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1051+2119_S_2017_03_27_pus_uvs.fits wwins J1051+2119_S_2017_03_27_pus_map.win ! wwins: Wrote 5 windows to J1051+2119_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000403048 Jy ! Component: 100 - total flux cleaned = -0.000540816 Jy ! Component: 150 - total flux cleaned = -0.000627137 Jy ! Component: 200 - total flux cleaned = -0.000668804 Jy ! Component: 250 - total flux cleaned = -0.000626776 Jy ! Component: 300 - total flux cleaned = -0.000586474 Jy ! Component: 350 - total flux cleaned = -0.000586527 Jy ! Component: 400 - total flux cleaned = -0.000548333 Jy ! Component: 450 - total flux cleaned = -0.000401584 Jy ! Component: 500 - total flux cleaned = -0.000366077 Jy ! Component: 550 - total flux cleaned = -0.000295001 Jy ! Component: 600 - total flux cleaned = -0.000121467 Jy ! Component: 650 - total flux cleaned = -8.7524e-05 Jy ! Component: 700 - total flux cleaned = 8.06155e-05 Jy ! Component: 750 - total flux cleaned = 0.000245892 Jy ! Component: 800 - total flux cleaned = 0.000440729 Jy ! Component: 850 - total flux cleaned = 0.000600482 Jy ! Component: 900 - total flux cleaned = 0.000663614 Jy ! Component: 950 - total flux cleaned = 0.000726081 Jy ! Component: 1000 - total flux cleaned = 0.000879241 Jy ! Component: 1050 - total flux cleaned = 0.00105956 Jy ! Component: 1100 - total flux cleaned = 0.00102949 Jy ! Component: 1150 - total flux cleaned = 0.00114681 Jy ! Component: 1200 - total flux cleaned = 0.001147 Jy ! Component: 1250 - total flux cleaned = 0.00126176 Jy ! Component: 1300 - total flux cleaned = 0.00126216 Jy ! Component: 1350 - total flux cleaned = 0.00137415 Jy ! Component: 1400 - total flux cleaned = 0.00140186 Jy ! Component: 1450 - total flux cleaned = 0.00142918 Jy ! Component: 1500 - total flux cleaned = 0.00148271 Jy ! Component: 1550 - total flux cleaned = 0.00150914 Jy ! Component: 1600 - total flux cleaned = 0.00143001 Jy ! Component: 1650 - total flux cleaned = 0.00153414 Jy ! Component: 1700 - total flux cleaned = 0.00150809 Jy ! Component: 1750 - total flux cleaned = 0.00150818 Jy ! Component: 1800 - total flux cleaned = 0.00160958 Jy ! Component: 1850 - total flux cleaned = 0.00165944 Jy ! Component: 1900 - total flux cleaned = 0.00175837 Jy ! Component: 1950 - total flux cleaned = 0.00173369 Jy ! Component: 2000 - total flux cleaned = 0.00173397 Jy ! Component: 2050 - total flux cleaned = 0.00180627 Jy ! Component: 2100 - total flux cleaned = 0.00190136 Jy ! Component: 2150 - total flux cleaned = 0.00190127 Jy ! Component: 2200 - total flux cleaned = 0.00197133 Jy ! Component: 2250 - total flux cleaned = 0.00206442 Jy ! Component: 2300 - total flux cleaned = 0.00213295 Jy ! Component: 2350 - total flux cleaned = 0.00215575 Jy ! Component: 2400 - total flux cleaned = 0.00220082 Jy ! Component: 2450 - total flux cleaned = 0.00224525 Jy ! Component: 2500 - total flux cleaned = 0.002223 Jy ! Component: 2550 - total flux cleaned = 0.00224477 Jy ! Component: 2600 - total flux cleaned = 0.00228838 Jy ! Component: 2650 - total flux cleaned = 0.00233174 Jy ! Component: 2700 - total flux cleaned = 0.00243881 Jy ! Component: 2750 - total flux cleaned = 0.00239613 Jy ! Component: 2800 - total flux cleaned = 0.00243858 Jy ! Component: 2850 - total flux cleaned = 0.00250122 Jy ! Component: 2900 - total flux cleaned = 0.00254281 Jy ! Component: 2950 - total flux cleaned = 0.0025841 Jy ! Component: 3000 - total flux cleaned = 0.00264539 Jy ! Component: 3050 - total flux cleaned = 0.00274682 Jy ! Component: 3100 - total flux cleaned = 0.00268643 Jy ! Component: 3150 - total flux cleaned = 0.00278621 Jy ! Component: 3200 - total flux cleaned = 0.0027665 Jy ! Component: 3250 - total flux cleaned = 0.00282591 Jy ! Component: 3300 - total flux cleaned = 0.00288476 Jy ! Component: 3350 - total flux cleaned = 0.0028847 Jy ! Component: 3400 - total flux cleaned = 0.00300066 Jy ! Component: 3450 - total flux cleaned = 0.00298147 Jy ! Component: 3500 - total flux cleaned = 0.00307677 Jy ! Component: 3550 - total flux cleaned = 0.00307665 Jy ! Component: 3600 - total flux cleaned = 0.00317061 Jy ! Component: 3650 - total flux cleaned = 0.00315199 Jy ! Component: 3700 - total flux cleaned = 0.00322622 Jy ! Component: 3750 - total flux cleaned = 0.00322631 Jy ! Component: 3800 - total flux cleaned = 0.00328121 Jy ! Component: 3850 - total flux cleaned = 0.00333569 Jy ! Component: 3900 - total flux cleaned = 0.00339016 Jy ! Component: 3950 - total flux cleaned = 0.00337205 Jy ! Component: 4000 - total flux cleaned = 0.00347935 Jy ! Component: 4050 - total flux cleaned = 0.00349708 Jy ! Total flux subtracted in 4096 components = 0.00355024 Jy ! Clean residual min=-0.000895 max=0.001097 Jy/beam ! Clean residual mean=0.000004 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.336433 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 511 components and 0.336433 Jy ![Exited script file: muppet] wmap "J1051+2119_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.61 x 7.623 at 2.924 degrees (North through East) ! Clean map min=-0.0026438 max=0.15824 Jy/beam ! Writing clean map to FITS file: J1051+2119_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.158235 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000329229 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.624189 0.624189 1.24838 2.49676 4.99351 9.98703 19.9741 39.9481 79.8962 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.158 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.61 x 7.623 at 2.924 degrees (North through East) ! Clean map min=-0.0026438 max=0.15824 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1051+2119_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:38:59 2019