! Started logfile: J1051+2119_S_2017_03_23_pus_uvs.log on Mon May 13 09:56:53 2019 obs J1051+2119_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1051+2119_S_2017_03_23_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.717778 visibilities/baseline/integration-bin. ! Found source: J1051+2119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1051+2119_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.829476Jy sigma=0.006871 ! Fit after self-cal, rms=0.825221Jy sigma=0.006832 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=8.24 mas, bpa=-27.33 degrees ! Estimated noise=3102.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133077 Jy ! Component: 100 - total flux cleaned = 0.186321 Jy ! Total flux subtracted in 100 components = 0.186321 Jy ! Clean residual min=-0.022135 max=0.031417 Jy/beam ! Clean residual mean=-0.000104 rms=0.006486 Jy/beam ! Combined flux in latest and established models = 0.186321 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.186321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125077Jy sigma=0.000960 ! Fit after self-cal, rms=0.124696Jy sigma=0.000956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=8.222 mas, bpa=-25.18 degrees ! Estimated noise=2625.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447501 Jy ! Component: 100 - total flux cleaned = 0.0690476 Jy ! Component: 150 - total flux cleaned = 0.0849642 Jy ! Component: 200 - total flux cleaned = 0.0959521 Jy ! Total flux subtracted in 200 components = 0.0959521 Jy ! Clean residual min=-0.018003 max=0.027283 Jy/beam ! Clean residual mean=-0.000141 rms=0.005363 Jy/beam ! Combined flux in latest and established models = 0.282273 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 54 components and 0.282273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106174Jy sigma=0.000810 ! Fit after self-cal, rms=0.106094Jy sigma=0.000807 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.03 KP 0.92 ! LA 0.93 MK 0.98 NL 0.91 OV 1.05 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 1.06 KP 0.87 ! LA 0.98 MK 1.04 NL 1.02 OV 1.05 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 0.77 ! LA 0.72 MK 1.07 NL 1.19 OV 1.00 ! PT 0.91 SC 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 1.00* HN 1.07 KP 1.00* ! LA 0.71 MK 0.90 NL 1.00* OV 3.42 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.106094Jy sigma=0.000807 ! Fit after self-cal, rms=0.101458Jy sigma=0.000705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.448 mas, bmaj=8.323 mas, bpa=-24.65 degrees ! Estimated noise=2575.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014413 Jy ! Component: 100 - total flux cleaned = -0.00155655 Jy ! Component: 150 - total flux cleaned = -0.00164997 Jy ! Component: 200 - total flux cleaned = -0.00164879 Jy ! Total flux subtracted in 200 components = -0.00164879 Jy ! Clean residual min=-0.012480 max=0.015748 Jy/beam ! Clean residual mean=-0.000045 rms=0.003629 Jy/beam ! Combined flux in latest and established models = 0.280624 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.280624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101283Jy sigma=0.000704 ! Fit after self-cal, rms=0.102570Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102570Jy sigma=0.000702 ! Fit after self-cal, rms=0.104609Jy sigma=0.000701 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=8.311 mas, bpa=-24.51 degrees ! Estimated noise=2572.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000879881 Jy ! Component: 100 - total flux cleaned = -0.00104835 Jy ! Component: 150 - total flux cleaned = -0.00112544 Jy ! Component: 200 - total flux cleaned = -0.00119915 Jy ! Total flux subtracted in 200 components = -0.00119915 Jy ! Clean residual min=-0.012260 max=0.015733 Jy/beam ! Clean residual mean=-0.000042 rms=0.003581 Jy/beam ! Combined flux in latest and established models = 0.279425 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.279425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104524Jy sigma=0.000700 ! Fit after self-cal, rms=0.104582Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00991641 Jy ! Component: 100 - total flux cleaned = 0.0127266 Jy ! Component: 150 - total flux cleaned = 0.0141713 Jy ! Component: 200 - total flux cleaned = 0.0149277 Jy ! Total flux subtracted in 200 components = 0.0149277 Jy ! Clean residual min=-0.009244 max=0.009047 Jy/beam ! Clean residual mean=-0.000012 rms=0.002395 Jy/beam ! Combined flux in latest and established models = 0.294352 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 0.294352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101233Jy sigma=0.000671 ! Fit after self-cal, rms=0.100693Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100693Jy sigma=0.000669 ! Fit after self-cal, rms=0.097385Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=8.226 mas, bpa=-24.2 degrees ! Estimated noise=2547.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438669 Jy ! Component: 100 - total flux cleaned = 0.00481193 Jy ! Component: 150 - total flux cleaned = 0.00465774 Jy ! Component: 200 - total flux cleaned = 0.00436582 Jy ! Total flux subtracted in 200 components = 0.00436582 Jy ! Clean residual min=-0.007463 max=0.007625 Jy/beam ! Clean residual mean=-0.000017 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.298718 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 125 components and 0.298718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096454Jy sigma=0.000660 ! Fit after self-cal, rms=0.096232Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569707 Jy ! Component: 100 - total flux cleaned = 5.69421e-05 Jy ! Component: 150 - total flux cleaned = -0.000295029 Jy ! Component: 200 - total flux cleaned = -0.000622552 Jy ! Total flux subtracted in 200 components = -0.000622552 Jy ! Clean residual min=-0.006850 max=0.007363 Jy/beam ! Clean residual mean=-0.000018 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.298096 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 142 components and 0.298096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095841Jy sigma=0.000656 ! Fit after self-cal, rms=0.095788Jy sigma=0.000656 ! Inverting map ! Added new window around map position (-61.5, 64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00511949 Jy ! Component: 100 - total flux cleaned = 0.00658169 Jy ! Component: 150 - total flux cleaned = 0.00745396 Jy ! Component: 200 - total flux cleaned = 0.00767717 Jy ! Total flux subtracted in 200 components = 0.00767717 Jy ! Clean residual min=-0.005767 max=0.005782 Jy/beam ! Clean residual mean=-0.000017 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.305773 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 170 components and 0.305773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095118Jy sigma=0.000651 ! Fit after self-cal, rms=0.095137Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095137Jy sigma=0.000651 ! Fit after self-cal, rms=0.093783Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.645 mas, bmaj=9.971 mas, bpa=-9.422 degrees ! Estimated noise=3012.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179756 Jy ! Component: 100 - total flux cleaned = 0.00257737 Jy ! Component: 150 - total flux cleaned = 0.00267635 Jy ! Component: 200 - total flux cleaned = 0.00261206 Jy ! Total flux subtracted in 200 components = 0.00261206 Jy ! Clean residual min=-0.005191 max=0.006121 Jy/beam ! Clean residual mean=-0.000034 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 0.308385 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 199 components and 0.308385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093653Jy sigma=0.000649 ! Fit after self-cal, rms=0.093626Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290023 Jy ! Component: 100 - total flux cleaned = 9.81389e-05 Jy ! Component: 150 - total flux cleaned = -0.000143804 Jy ! Component: 200 - total flux cleaned = -0.000427024 Jy ! Total flux subtracted in 200 components = -0.000427024 Jy ! Clean residual min=-0.005004 max=0.005725 Jy/beam ! Clean residual mean=-0.000031 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.307958 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 215 components and 0.307958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093534Jy sigma=0.000649 ! Fit after self-cal, rms=0.093525Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.176 mas, bpa=-24.01 degrees ! Estimated noise=2522.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.176 at -24.01 degrees (North through East) ! Clean map min=-0.014757 max=0.17535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=8.099 mas, bpa=-26.31 degrees ! Estimated noise=2999.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128501 Jy ! Component: 100 - total flux cleaned = 0.182309 Jy ! Component: 150 - total flux cleaned = 0.213952 Jy ! Component: 200 - total flux cleaned = 0.234611 Jy ! Total flux subtracted in 200 components = 0.234611 Jy ! Clean residual min=-0.013333 max=0.016784 Jy/beam ! Clean residual mean=-0.000051 rms=0.003722 Jy/beam ! Combined flux in latest and established models = 0.234611 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.234611 Jy ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.176 mas, bpa=-24.01 degrees ! Estimated noise=2522.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243616 Jy ! Component: 100 - total flux cleaned = 0.037292 Jy ! Component: 150 - total flux cleaned = 0.0437302 Jy ! Component: 200 - total flux cleaned = 0.0492016 Jy ! Total flux subtracted in 200 components = 0.0492016 Jy ! Clean residual min=-0.009018 max=0.007047 Jy/beam ! Clean residual mean=-0.000044 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.283813 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 77 components and 0.283813 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.645 mas, bmaj=9.971 mas, bpa=-9.422 degrees ! Estimated noise=3012.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103501 Jy ! Component: 100 - total flux cleaned = 0.0151197 Jy ! Component: 150 - total flux cleaned = 0.0181689 Jy ! Component: 200 - total flux cleaned = 0.0204267 Jy ! Total flux subtracted in 200 components = 0.0204267 Jy ! Clean residual min=-0.006828 max=0.004963 Jy/beam ! Clean residual mean=-0.000039 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.30424 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168177 Jy ! Component: 100 - total flux cleaned = 0.00280085 Jy ! Component: 150 - total flux cleaned = 0.00338158 Jy ! Component: 200 - total flux cleaned = 0.00369049 Jy ! Total flux subtracted in 200 components = 0.00369049 Jy ! Clean residual min=-0.005625 max=0.004611 Jy/beam ! Clean residual mean=-0.000030 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.30793 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 132 components and 0.30793 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.176 mas, bpa=-24.01 degrees ! Estimated noise=2522.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00257182 Jy ! Component: 100 - total flux cleaned = -0.00313402 Jy ! Component: 150 - total flux cleaned = -0.00372868 Jy ! Component: 200 - total flux cleaned = -0.00373318 Jy ! Total flux subtracted in 200 components = -0.00373318 Jy ! Clean residual min=-0.005397 max=0.004647 Jy/beam ! Clean residual mean=-0.000016 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.304197 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 156 components and 0.304197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093485Jy sigma=0.000648 ! Fit after self-cal, rms=0.093440Jy sigma=0.000648 wmodel J1051+2119_S_2017_03_23_pus_map.mod ! Writing 156 model components to file: J1051+2119_S_2017_03_23_pus_map.mod wobs J1051+2119_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1051+2119_S_2017_03_23_pus_uvs.fits wwins J1051+2119_S_2017_03_23_pus_map.win ! wwins: Wrote 4 windows to J1051+2119_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168469 Jy ! Component: 100 - total flux cleaned = -0.00160175 Jy ! Component: 150 - total flux cleaned = -0.0019016 Jy ! Component: 200 - total flux cleaned = -0.0021773 Jy ! Component: 250 - total flux cleaned = -0.00237062 Jy ! Component: 300 - total flux cleaned = -0.00231008 Jy ! Component: 350 - total flux cleaned = -0.00265566 Jy ! Component: 400 - total flux cleaned = -0.00282054 Jy ! Component: 450 - total flux cleaned = -0.00314278 Jy ! Component: 500 - total flux cleaned = -0.00350636 Jy ! Component: 550 - total flux cleaned = -0.00380728 Jy ! Component: 600 - total flux cleaned = -0.00400079 Jy ! Component: 650 - total flux cleaned = -0.00400038 Jy ! Component: 700 - total flux cleaned = -0.00413835 Jy ! Component: 750 - total flux cleaned = -0.00427226 Jy ! Component: 800 - total flux cleaned = -0.00457543 Jy ! Component: 850 - total flux cleaned = -0.0047857 Jy ! Component: 900 - total flux cleaned = -0.00503273 Jy ! Component: 950 - total flux cleaned = -0.00519334 Jy ! Component: 1000 - total flux cleaned = -0.0053516 Jy ! Component: 1050 - total flux cleaned = -0.00562371 Jy ! Component: 1100 - total flux cleaned = -0.00596672 Jy ! Component: 1150 - total flux cleaned = -0.00622873 Jy ! Component: 1200 - total flux cleaned = -0.0065232 Jy ! Component: 1250 - total flux cleaned = -0.00677683 Jy ! Component: 1300 - total flux cleaned = -0.00706213 Jy ! Component: 1350 - total flux cleaned = -0.00720274 Jy ! Component: 1400 - total flux cleaned = -0.00741115 Jy ! Component: 1450 - total flux cleaned = -0.00761679 Jy ! Component: 1500 - total flux cleaned = -0.00771844 Jy ! Component: 1550 - total flux cleaned = -0.0079522 Jy ! Component: 1600 - total flux cleaned = -0.00811691 Jy ! Component: 1650 - total flux cleaned = -0.00814928 Jy ! Component: 1700 - total flux cleaned = -0.00843992 Jy ! Component: 1750 - total flux cleaned = -0.0086001 Jy ! Component: 1800 - total flux cleaned = -0.00872701 Jy ! Component: 1850 - total flux cleaned = -0.00891575 Jy ! Component: 1900 - total flux cleaned = -0.00907175 Jy ! Component: 1950 - total flux cleaned = -0.00913411 Jy ! Component: 2000 - total flux cleaned = -0.00931886 Jy ! Component: 2050 - total flux cleaned = -0.0094412 Jy ! Component: 2100 - total flux cleaned = -0.00962375 Jy ! Component: 2150 - total flux cleaned = -0.00971456 Jy ! Component: 2200 - total flux cleaned = -0.0098348 Jy ! Component: 2250 - total flux cleaned = -0.00992494 Jy ! Component: 2300 - total flux cleaned = -0.0100738 Jy ! Component: 2350 - total flux cleaned = -0.0102218 Jy ! Component: 2400 - total flux cleaned = -0.0102221 Jy ! Component: 2450 - total flux cleaned = -0.0103984 Jy ! Component: 2500 - total flux cleaned = -0.0104572 Jy ! Component: 2550 - total flux cleaned = -0.010574 Jy ! Component: 2600 - total flux cleaned = -0.0107484 Jy ! Component: 2650 - total flux cleaned = -0.0108063 Jy ! Component: 2700 - total flux cleaned = -0.0108928 Jy ! Component: 2750 - total flux cleaned = -0.0110076 Jy ! Component: 2800 - total flux cleaned = -0.0110361 Jy ! Component: 2850 - total flux cleaned = -0.0111792 Jy ! Component: 2900 - total flux cleaned = -0.0112363 Jy ! Component: 2950 - total flux cleaned = -0.0112933 Jy ! Component: 3000 - total flux cleaned = -0.0113785 Jy ! Component: 3050 - total flux cleaned = -0.0114636 Jy ! Component: 3100 - total flux cleaned = -0.011605 Jy ! Component: 3150 - total flux cleaned = -0.0116615 Jy ! Component: 3200 - total flux cleaned = -0.0117747 Jy ! Component: 3250 - total flux cleaned = -0.0118879 Jy ! Component: 3300 - total flux cleaned = -0.0120293 Jy ! Component: 3350 - total flux cleaned = -0.0120858 Jy ! Component: 3400 - total flux cleaned = -0.0121424 Jy ! Component: 3450 - total flux cleaned = -0.012284 Jy ! Component: 3500 - total flux cleaned = -0.0123408 Jy ! Component: 3550 - total flux cleaned = -0.0124828 Jy ! Component: 3600 - total flux cleaned = -0.0125683 Jy ! Component: 3650 - total flux cleaned = -0.0126824 Jy ! Component: 3700 - total flux cleaned = -0.0127683 Jy ! Component: 3750 - total flux cleaned = -0.0127969 Jy ! Component: 3800 - total flux cleaned = -0.012912 Jy ! Component: 3850 - total flux cleaned = -0.0130275 Jy ! Component: 3900 - total flux cleaned = -0.0131146 Jy ! Component: 3950 - total flux cleaned = -0.0131729 Jy ! Component: 4000 - total flux cleaned = -0.0132609 Jy ! Component: 4050 - total flux cleaned = -0.0133494 Jy ! Total flux subtracted in 4096 components = -0.0134385 Jy ! Clean residual min=-0.001766 max=0.002024 Jy/beam ! Clean residual mean=0.000004 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.290758 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 388 components and 0.290758 Jy ![Exited script file: muppet] wmap "J1051+2119_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.176 at -24.01 degrees (North through East) ! Clean map min=-0.012145 max=0.17393 Jy/beam ! Writing clean map to FITS file: J1051+2119_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173931 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000444796 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.767192 0.767192 1.53438 3.06877 6.13754 12.2751 24.5502 49.1003 98.2006 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.173 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 8.176 at -24.01 degrees (North through East) ! Clean map min=-0.012145 max=0.17393 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1051+2119_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:56:57 2019