! Started logfile: J1051+2119_S_2017_02_19_pus_uvs.log on Sat May 4 18:49:13 2019 obs J1051+2119_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1051+2119_S_2017_02_19_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.406667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1051+2119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1051+2119_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.784915Jy sigma=0.006464 ! Fit after self-cal, rms=0.772390Jy sigma=0.006369 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.67 mas, bmaj=8.344 mas, bpa=-58.93 degrees ! Estimated noise=4235.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.17658 Jy ! Component: 100 - total flux cleaned = 0.239249 Jy ! Total flux subtracted in 100 components = 0.239249 Jy ! Clean residual min=-0.016125 max=0.027795 Jy/beam ! Clean residual mean=-0.000028 rms=0.006961 Jy/beam ! Combined flux in latest and established models = 0.239249 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.239249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111883Jy sigma=0.000835 ! Fit after self-cal, rms=0.111498Jy sigma=0.000832 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.471 mas, bmaj=9 mas, bpa=87.56 degrees ! Estimated noise=3583.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363431 Jy ! Component: 100 - total flux cleaned = 0.0534944 Jy ! Component: 150 - total flux cleaned = 0.0637696 Jy ! Component: 200 - total flux cleaned = 0.0708808 Jy ! Total flux subtracted in 200 components = 0.0708808 Jy ! Clean residual min=-0.018394 max=0.016026 Jy/beam ! Clean residual mean=-0.000019 rms=0.004737 Jy/beam ! Combined flux in latest and established models = 0.31013 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 51 components and 0.31013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098002Jy sigma=0.000743 ! Fit after self-cal, rms=0.097660Jy sigma=0.000740 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.07 HN 0.97 KP 1.05 ! LA 0.94 MK 1.00* NL 0.88 OV 1.08 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.09 HN 1.00 KP 0.95 ! LA 0.96 MK 1.00* NL 1.10 OV 1.07 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.06 HN 1.00 KP 0.90 ! LA 0.74 MK 1.00* NL 1.26 OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.83 HN 0.92 KP 1.00* ! LA 0.89 MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.097660Jy sigma=0.000740 ! Fit after self-cal, rms=0.084471Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.464 mas, bmaj=9.056 mas, bpa=88.48 degrees ! Estimated noise=3542.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132268 Jy ! Component: 100 - total flux cleaned = 0.0161775 Jy ! Component: 150 - total flux cleaned = 0.0158926 Jy ! Component: 200 - total flux cleaned = 0.0155768 Jy ! Total flux subtracted in 200 components = 0.0155768 Jy ! Clean residual min=-0.005810 max=0.006891 Jy/beam ! Clean residual mean=-0.000002 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 0.325707 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 82 components and 0.325707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082616Jy sigma=0.000667 ! Fit after self-cal, rms=0.082551Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082551Jy sigma=0.000666 ! Fit after self-cal, rms=0.082614Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.473 mas, bmaj=9.08 mas, bpa=-89.1 degrees ! Estimated noise=3539.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256404 Jy ! Component: 100 - total flux cleaned = 0.00268954 Jy ! Component: 150 - total flux cleaned = 0.00293258 Jy ! Component: 200 - total flux cleaned = 0.0031485 Jy ! Total flux subtracted in 200 components = 0.0031485 Jy ! Clean residual min=-0.004782 max=0.005413 Jy/beam ! Clean residual mean=-0.000003 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.328855 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.328855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082463Jy sigma=0.000664 ! Fit after self-cal, rms=0.082450Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011185 Jy ! Component: 100 - total flux cleaned = 0.00160644 Jy ! Component: 150 - total flux cleaned = 0.00186062 Jy ! Component: 200 - total flux cleaned = 0.00197544 Jy ! Total flux subtracted in 200 components = 0.00197544 Jy ! Clean residual min=-0.004630 max=0.004904 Jy/beam ! Clean residual mean=-0.000003 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.330831 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 0.330831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082402Jy sigma=0.000664 ! Fit after self-cal, rms=0.082398Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082398Jy sigma=0.000664 ! Fit after self-cal, rms=0.082683Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.481 mas, bmaj=9.097 mas, bpa=-88.15 degrees ! Estimated noise=3549.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124792 Jy ! Component: 100 - total flux cleaned = 0.00145079 Jy ! Component: 150 - total flux cleaned = 0.0015218 Jy ! Component: 200 - total flux cleaned = 0.00155458 Jy ! Total flux subtracted in 200 components = 0.00155458 Jy ! Clean residual min=-0.004313 max=0.004455 Jy/beam ! Clean residual mean=-0.000003 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.332385 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 134 components and 0.332385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082637Jy sigma=0.000663 ! Fit after self-cal, rms=0.082631Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624728 Jy ! Component: 100 - total flux cleaned = 0.00088907 Jy ! Component: 150 - total flux cleaned = 0.000993724 Jy ! Component: 200 - total flux cleaned = 0.00106565 Jy ! Total flux subtracted in 200 components = 0.00106565 Jy ! Clean residual min=-0.004200 max=0.004356 Jy/beam ! Clean residual mean=-0.000003 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.333451 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 145 components and 0.333451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082613Jy sigma=0.000663 ! Fit after self-cal, rms=0.082612Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082612Jy sigma=0.000663 ! Fit after self-cal, rms=0.082843Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.462 mas, bmaj=10.14 mas, bpa=85.48 degrees ! Estimated noise=3665.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445498 Jy ! Component: 100 - total flux cleaned = 0.000300252 Jy ! Component: 150 - total flux cleaned = 0.00015785 Jy ! Component: 200 - total flux cleaned = 7.11169e-05 Jy ! Total flux subtracted in 200 components = 7.11169e-05 Jy ! Clean residual min=-0.004047 max=0.004261 Jy/beam ! Clean residual mean=-0.000004 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.333522 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 158 components and 0.333522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082823Jy sigma=0.000663 ! Fit after self-cal, rms=0.082822Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138983 Jy ! Component: 100 - total flux cleaned = 0.000198853 Jy ! Component: 150 - total flux cleaned = 0.000216433 Jy ! Component: 200 - total flux cleaned = 0.000182404 Jy ! Total flux subtracted in 200 components = 0.000182404 Jy ! Clean residual min=-0.003934 max=0.004155 Jy/beam ! Clean residual mean=-0.000004 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.333704 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 168 components and 0.333704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082813Jy sigma=0.000663 ! Fit after self-cal, rms=0.082814Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.486 mas, bmaj=9.111 mas, bpa=-87.45 degrees ! Estimated noise=3556.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.486 x 9.111 at -87.45 degrees (North through East) ! Clean map min=-0.003893 max=0.22995 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.683 mas, bmaj=8.362 mas, bpa=-61.5 degrees ! Estimated noise=4186.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173079 Jy ! Component: 100 - total flux cleaned = 0.235954 Jy ! Component: 150 - total flux cleaned = 0.267222 Jy ! Component: 200 - total flux cleaned = 0.285827 Jy ! Total flux subtracted in 200 components = 0.285827 Jy ! Clean residual min=-0.008648 max=0.011018 Jy/beam ! Clean residual mean=-0.000010 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.285826 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.285826 Jy ! Inverting map and beam ! Estimated beam: bmin=8.486 mas, bmaj=9.111 mas, bpa=-87.45 degrees ! Estimated noise=3556.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143593 Jy ! Component: 100 - total flux cleaned = 0.0231023 Jy ! Component: 150 - total flux cleaned = 0.0286052 Jy ! Component: 200 - total flux cleaned = 0.03169 Jy ! Total flux subtracted in 200 components = 0.03169 Jy ! Clean residual min=-0.006101 max=0.005110 Jy/beam ! Clean residual mean=-0.000005 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.317516 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 104 components and 0.317516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.462 mas, bmaj=10.14 mas, bpa=85.48 degrees ! Estimated noise=3665.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368283 Jy ! Component: 100 - total flux cleaned = 0.00529456 Jy ! Component: 150 - total flux cleaned = 0.00694593 Jy ! Component: 200 - total flux cleaned = 0.00824439 Jy ! Total flux subtracted in 200 components = 0.00824439 Jy ! Clean residual min=-0.004965 max=0.004352 Jy/beam ! Clean residual mean=-0.000004 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.325761 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124126 Jy ! Component: 100 - total flux cleaned = 0.00218794 Jy ! Component: 150 - total flux cleaned = 0.0031249 Jy ! Component: 200 - total flux cleaned = 0.00366187 Jy ! Total flux subtracted in 200 components = 0.00366187 Jy ! Clean residual min=-0.004535 max=0.004041 Jy/beam ! Clean residual mean=-0.000004 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.329423 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 166 components and 0.329423 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.486 mas, bmaj=9.111 mas, bpa=-87.45 degrees ! Estimated noise=3556.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329065 Jy ! Component: 100 - total flux cleaned = 0.000910162 Jy ! Component: 150 - total flux cleaned = 0.00154158 Jy ! Component: 200 - total flux cleaned = 0.00211189 Jy ! Total flux subtracted in 200 components = 0.00211189 Jy ! Clean residual min=-0.004355 max=0.004110 Jy/beam ! Clean residual mean=-0.000003 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.331535 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 186 components and 0.331535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082840Jy sigma=0.000663 ! Fit after self-cal, rms=0.082837Jy sigma=0.000663 wmodel J1051+2119_S_2017_02_19_pus_map.mod ! Writing 186 model components to file: J1051+2119_S_2017_02_19_pus_map.mod wobs J1051+2119_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1051+2119_S_2017_02_19_pus_uvs.fits wwins J1051+2119_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1051+2119_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011841 Jy ! Component: 100 - total flux cleaned = -0.00194492 Jy ! Component: 150 - total flux cleaned = -0.0027258 Jy ! Component: 200 - total flux cleaned = -0.00333894 Jy ! Component: 250 - total flux cleaned = -0.00357176 Jy ! Component: 300 - total flux cleaned = -0.00368348 Jy ! Component: 350 - total flux cleaned = -0.00379143 Jy ! Component: 400 - total flux cleaned = -0.00384452 Jy ! Component: 450 - total flux cleaned = -0.00379462 Jy ! Component: 500 - total flux cleaned = -0.00384337 Jy ! Component: 550 - total flux cleaned = -0.0038912 Jy ! Component: 600 - total flux cleaned = -0.00398344 Jy ! Component: 650 - total flux cleaned = -0.00411725 Jy ! Component: 700 - total flux cleaned = -0.00420444 Jy ! Component: 750 - total flux cleaned = -0.00416174 Jy ! Component: 800 - total flux cleaned = -0.00412033 Jy ! Component: 850 - total flux cleaned = -0.00416046 Jy ! Component: 900 - total flux cleaned = -0.0042399 Jy ! Component: 950 - total flux cleaned = -0.00439517 Jy ! Component: 1000 - total flux cleaned = -0.00443301 Jy ! Component: 1050 - total flux cleaned = -0.00458348 Jy ! Component: 1100 - total flux cleaned = -0.00454626 Jy ! Component: 1150 - total flux cleaned = -0.00454652 Jy ! Component: 1200 - total flux cleaned = -0.00454626 Jy ! Component: 1250 - total flux cleaned = -0.00444046 Jy ! Component: 1300 - total flux cleaned = -0.00440565 Jy ! Component: 1350 - total flux cleaned = -0.00426758 Jy ! Component: 1400 - total flux cleaned = -0.00423339 Jy ! Component: 1450 - total flux cleaned = -0.00419957 Jy ! Component: 1500 - total flux cleaned = -0.00426696 Jy ! Component: 1550 - total flux cleaned = -0.00430023 Jy ! Component: 1600 - total flux cleaned = -0.00426716 Jy ! Component: 1650 - total flux cleaned = -0.00433248 Jy ! Component: 1700 - total flux cleaned = -0.00436517 Jy ! Component: 1750 - total flux cleaned = -0.00442981 Jy ! Component: 1800 - total flux cleaned = -0.00449384 Jy ! Component: 1850 - total flux cleaned = -0.00452581 Jy ! Component: 1900 - total flux cleaned = -0.00455763 Jy ! Component: 1950 - total flux cleaned = -0.00468378 Jy ! Component: 2000 - total flux cleaned = -0.00468387 Jy ! Component: 2050 - total flux cleaned = -0.00484057 Jy ! Component: 2100 - total flux cleaned = -0.00487186 Jy ! Component: 2150 - total flux cleaned = -0.00493411 Jy ! Component: 2200 - total flux cleaned = -0.00502708 Jy ! Component: 2250 - total flux cleaned = -0.00505809 Jy ! Component: 2300 - total flux cleaned = -0.00508907 Jy ! Component: 2350 - total flux cleaned = -0.00508909 Jy ! Component: 2400 - total flux cleaned = -0.00512009 Jy ! Component: 2450 - total flux cleaned = -0.00512008 Jy ! Component: 2500 - total flux cleaned = -0.00512008 Jy ! Component: 2550 - total flux cleaned = -0.00512024 Jy ! Component: 2600 - total flux cleaned = -0.00518171 Jy ! Component: 2650 - total flux cleaned = -0.0052744 Jy ! Component: 2700 - total flux cleaned = -0.00536728 Jy ! Component: 2750 - total flux cleaned = -0.00539801 Jy ! Component: 2800 - total flux cleaned = -0.00552267 Jy ! Component: 2850 - total flux cleaned = -0.00558544 Jy ! Component: 2900 - total flux cleaned = -0.00571093 Jy ! Component: 2950 - total flux cleaned = -0.00580597 Jy ! Component: 3000 - total flux cleaned = -0.00590122 Jy ! Component: 3050 - total flux cleaned = -0.00596498 Jy ! Component: 3100 - total flux cleaned = -0.0061252 Jy ! Component: 3150 - total flux cleaned = -0.00622214 Jy ! Component: 3200 - total flux cleaned = -0.00628657 Jy ! Component: 3250 - total flux cleaned = -0.00638401 Jy ! Component: 3300 - total flux cleaned = -0.00648226 Jy ! Component: 3350 - total flux cleaned = -0.00658144 Jy ! Component: 3400 - total flux cleaned = -0.00668187 Jy ! Component: 3450 - total flux cleaned = -0.00674904 Jy ! Component: 3500 - total flux cleaned = -0.00688436 Jy ! Component: 3550 - total flux cleaned = -0.00691791 Jy ! Component: 3600 - total flux cleaned = -0.00705585 Jy ! Component: 3650 - total flux cleaned = -0.00716026 Jy ! Component: 3700 - total flux cleaned = -0.0072307 Jy ! Component: 3750 - total flux cleaned = -0.00730139 Jy ! Component: 3800 - total flux cleaned = -0.00737305 Jy ! Component: 3850 - total flux cleaned = -0.00744546 Jy ! Component: 3900 - total flux cleaned = -0.00748203 Jy ! Component: 3950 - total flux cleaned = -0.00755546 Jy ! Component: 4000 - total flux cleaned = -0.00770493 Jy ! Component: 4050 - total flux cleaned = -0.00770459 Jy ! Total flux subtracted in 4096 components = -0.00781851 Jy ! Clean residual min=-0.002329 max=0.002658 Jy/beam ! Clean residual mean=-0.000016 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.323716 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 426 components and 0.323716 Jy ![Exited script file: muppet] wmap "J1051+2119_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.486 x 9.111 at -87.45 degrees (North through East) ! Clean map min=-0.0046708 max=0.22924 Jy/beam ! Writing clean map to FITS file: J1051+2119_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.229236 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000686892 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.898934 0.898934 1.79787 3.59573 7.19147 14.3829 28.7659 57.5317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.229 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.486 x 9.111 at -87.45 degrees (North through East) ! Clean map min=-0.0046708 max=0.22924 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1051+2119_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:49:18 2019