! Started logfile: J1051+2119_S_2017_01_21_pus_uvs.log on Sun May 5 15:52:58 2019 obs J1051+2119_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1051+2119_S_2017_01_21_pus_uva.fits ! AN table 1: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.688889 visibilities/baseline/integration-bin. ! Found source: J1051+2119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1051+2119_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.849134Jy sigma=0.006269 ! Fit after self-cal, rms=0.843960Jy sigma=0.006232 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=7.583 mas, bpa=-26.03 degrees ! Estimated noise=3760.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124906 Jy ! Component: 100 - total flux cleaned = 0.171012 Jy ! Total flux subtracted in 100 components = 0.171012 Jy ! Clean residual min=-0.024104 max=0.027607 Jy/beam ! Clean residual mean=-0.000159 rms=0.006710 Jy/beam ! Combined flux in latest and established models = 0.171012 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.171012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116292Jy sigma=0.000846 ! Fit after self-cal, rms=0.115826Jy sigma=0.000843 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=7.776 mas, bpa=-23.76 degrees ! Estimated noise=3268.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375948 Jy ! Component: 100 - total flux cleaned = 0.0578383 Jy ! Component: 150 - total flux cleaned = 0.0705176 Jy ! Component: 200 - total flux cleaned = 0.0791843 Jy ! Total flux subtracted in 200 components = 0.0791843 Jy ! Clean residual min=-0.015736 max=0.025266 Jy/beam ! Clean residual mean=-0.000222 rms=0.005521 Jy/beam ! Combined flux in latest and established models = 0.250197 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 0.250197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105710Jy sigma=0.000722 ! Fit after self-cal, rms=0.105466Jy sigma=0.000720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.00* HN 0.93 LA 0.94 ! MK 0.89 NL 0.93 OV 1.24 PT 0.91 ! SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* HN 1.00 LA 0.89 ! MK 0.95 NL 0.97 OV 1.21 PT 0.83 ! SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* HN 0.96 LA 0.86 ! MK 1.26 NL 1.05 OV 1.34 PT 0.88 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.00* HN 0.95 LA 0.93 ! MK 0.81 NL 1.00* OV 1.35 PT 0.85 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.105466Jy sigma=0.000720 ! Fit after self-cal, rms=0.114996Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=7.89 mas, bpa=-23.76 degrees ! Estimated noise=3196.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000593874 Jy ! Component: 100 - total flux cleaned = 0.000844343 Jy ! Component: 150 - total flux cleaned = 0.000843649 Jy ! Component: 200 - total flux cleaned = 0.00115696 Jy ! Total flux subtracted in 200 components = 0.00115696 Jy ! Clean residual min=-0.010781 max=0.015407 Jy/beam ! Clean residual mean=-0.000026 rms=0.003270 Jy/beam ! Combined flux in latest and established models = 0.251354 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.251354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114700Jy sigma=0.000671 ! Fit after self-cal, rms=0.115684Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115684Jy sigma=0.000670 ! Fit after self-cal, rms=0.117515Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.91 mas, bpa=-23.87 degrees ! Estimated noise=3204.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102584 Jy ! Component: 100 - total flux cleaned = 0.00123327 Jy ! Component: 150 - total flux cleaned = 0.00151675 Jy ! Component: 200 - total flux cleaned = 0.00169346 Jy ! Total flux subtracted in 200 components = 0.00169346 Jy ! Clean residual min=-0.010708 max=0.014977 Jy/beam ! Clean residual mean=-0.000022 rms=0.003233 Jy/beam ! Combined flux in latest and established models = 0.253047 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.253047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117207Jy sigma=0.000669 ! Fit after self-cal, rms=0.117345Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131105 Jy ! Component: 100 - total flux cleaned = 0.017264 Jy ! Component: 150 - total flux cleaned = 0.0179995 Jy ! Component: 200 - total flux cleaned = 0.0186685 Jy ! Total flux subtracted in 200 components = 0.0186685 Jy ! Clean residual min=-0.008531 max=0.010115 Jy/beam ! Clean residual mean=0.000042 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 0.271716 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.271716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114448Jy sigma=0.000657 ! Fit after self-cal, rms=0.114203Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114203Jy sigma=0.000656 ! Fit after self-cal, rms=0.110280Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=7.874 mas, bpa=-24 degrees ! Estimated noise=3181.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651287 Jy ! Component: 100 - total flux cleaned = 0.00734929 Jy ! Component: 150 - total flux cleaned = 0.00803959 Jy ! Component: 200 - total flux cleaned = 0.00850052 Jy ! Total flux subtracted in 200 components = 0.00850052 Jy ! Clean residual min=-0.007522 max=0.008120 Jy/beam ! Clean residual mean=0.000028 rms=0.002086 Jy/beam ! Combined flux in latest and established models = 0.280216 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 95 components and 0.280216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109098Jy sigma=0.000650 ! Fit after self-cal, rms=0.108959Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137462 Jy ! Component: 100 - total flux cleaned = 0.00109582 Jy ! Component: 150 - total flux cleaned = 0.000846873 Jy ! Component: 200 - total flux cleaned = 0.000499605 Jy ! Total flux subtracted in 200 components = 0.000499605 Jy ! Clean residual min=-0.007250 max=0.007565 Jy/beam ! Clean residual mean=0.000031 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.280716 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 0.280716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108421Jy sigma=0.000647 ! Fit after self-cal, rms=0.108402Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108402Jy sigma=0.000647 ! Fit after self-cal, rms=0.105761Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.159 mas, bmaj=9.611 mas, bpa=-9.721 degrees ! Estimated noise=3931.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034522 Jy ! Component: 100 - total flux cleaned = 0.00331076 Jy ! Component: 150 - total flux cleaned = 0.00273371 Jy ! Component: 200 - total flux cleaned = 0.00235344 Jy ! Total flux subtracted in 200 components = 0.00235344 Jy ! Clean residual min=-0.006909 max=0.007810 Jy/beam ! Clean residual mean=0.000031 rms=0.002160 Jy/beam ! Combined flux in latest and established models = 0.283069 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.283069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105321Jy sigma=0.000645 ! Fit after self-cal, rms=0.105195Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748086 Jy ! Component: 100 - total flux cleaned = 0.000523394 Jy ! Component: 150 - total flux cleaned = 0.000102382 Jy ! Component: 200 - total flux cleaned = -0.000277652 Jy ! Total flux subtracted in 200 components = -0.000277652 Jy ! Clean residual min=-0.006564 max=0.007360 Jy/beam ! Clean residual mean=0.000032 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.282791 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.282791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104967Jy sigma=0.000644 ! Fit after self-cal, rms=0.104922Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=7.86 mas, bpa=-24.11 degrees ! Estimated noise=3177.88 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.152 x 7.86 at -24.11 degrees (North through East) ! Clean map min=-0.0083172 max=0.16251 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=7.672 mas, bpa=-26.39 degrees ! Estimated noise=3647.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120612 Jy ! Component: 100 - total flux cleaned = 0.166734 Jy ! Component: 150 - total flux cleaned = 0.193778 Jy ! Component: 200 - total flux cleaned = 0.212089 Jy ! Total flux subtracted in 200 components = 0.212089 Jy ! Clean residual min=-0.012006 max=0.014184 Jy/beam ! Clean residual mean=-0.000075 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 0.212089 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.212089 Jy ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=7.86 mas, bpa=-24.11 degrees ! Estimated noise=3177.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205871 Jy ! Component: 100 - total flux cleaned = 0.0340814 Jy ! Component: 150 - total flux cleaned = 0.0436207 Jy ! Component: 200 - total flux cleaned = 0.0508773 Jy ! Total flux subtracted in 200 components = 0.0508773 Jy ! Clean residual min=-0.008452 max=0.008684 Jy/beam ! Clean residual mean=-0.000045 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 0.262966 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 59 components and 0.262966 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.159 mas, bmaj=9.611 mas, bpa=-9.721 degrees ! Estimated noise=3931.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00954613 Jy ! Component: 100 - total flux cleaned = 0.0129721 Jy ! Component: 150 - total flux cleaned = 0.0148504 Jy ! Component: 200 - total flux cleaned = 0.0165642 Jy ! Total flux subtracted in 200 components = 0.0165642 Jy ! Clean residual min=-0.007120 max=0.007253 Jy/beam ! Clean residual mean=0.000008 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.279531 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100988 Jy ! Component: 100 - total flux cleaned = 0.0016157 Jy ! Component: 150 - total flux cleaned = 0.00193614 Jy ! Component: 200 - total flux cleaned = 0.00212883 Jy ! Total flux subtracted in 200 components = 0.00212883 Jy ! Clean residual min=-0.006383 max=0.007238 Jy/beam ! Clean residual mean=0.000024 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 0.281659 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 101 components and 0.28166 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=7.86 mas, bpa=-24.11 degrees ! Estimated noise=3177.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000193165 Jy ! Component: 100 - total flux cleaned = 0.000307033 Jy ! Component: 150 - total flux cleaned = 0.000424655 Jy ! Component: 200 - total flux cleaned = 0.000621868 Jy ! Total flux subtracted in 200 components = 0.000621868 Jy ! Clean residual min=-0.005813 max=0.006705 Jy/beam ! Clean residual mean=0.000012 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.282281 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 0.282281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104853Jy sigma=0.000643 ! Fit after self-cal, rms=0.104781Jy sigma=0.000642 wmodel J1051+2119_S_2017_01_21_pus_map.mod ! Writing 120 model components to file: J1051+2119_S_2017_01_21_pus_map.mod wobs J1051+2119_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1051+2119_S_2017_01_21_pus_uvs.fits wwins J1051+2119_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1051+2119_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186402 Jy ! Component: 100 - total flux cleaned = 0.00216624 Jy ! Component: 150 - total flux cleaned = 0.00252858 Jy ! Component: 200 - total flux cleaned = 0.00312417 Jy ! Component: 250 - total flux cleaned = 0.00392743 Jy ! Component: 300 - total flux cleaned = 0.00446092 Jy ! Component: 350 - total flux cleaned = 0.00482376 Jy ! Component: 400 - total flux cleaned = 0.0048928 Jy ! Component: 450 - total flux cleaned = 0.00482704 Jy ! Component: 500 - total flux cleaned = 0.00450966 Jy ! Component: 550 - total flux cleaned = 0.00408208 Jy ! Component: 600 - total flux cleaned = 0.00372748 Jy ! Component: 650 - total flux cleaned = 0.00355505 Jy ! Component: 700 - total flux cleaned = 0.00338718 Jy ! Component: 750 - total flux cleaned = 0.00316969 Jy ! Component: 800 - total flux cleaned = 0.00306368 Jy ! Component: 850 - total flux cleaned = 0.00290992 Jy ! Component: 900 - total flux cleaned = 0.00291056 Jy ! Component: 950 - total flux cleaned = 0.00295826 Jy ! Component: 1000 - total flux cleaned = 0.00286211 Jy ! Component: 1050 - total flux cleaned = 0.00276806 Jy ! Component: 1100 - total flux cleaned = 0.00263016 Jy ! Component: 1150 - total flux cleaned = 0.00245019 Jy ! Component: 1200 - total flux cleaned = 0.00236179 Jy ! Component: 1250 - total flux cleaned = 0.00219023 Jy ! Component: 1300 - total flux cleaned = 0.00214837 Jy ! Component: 1350 - total flux cleaned = 0.00214829 Jy ! Component: 1400 - total flux cleaned = 0.00202721 Jy ! Component: 1450 - total flux cleaned = 0.00210726 Jy ! Component: 1500 - total flux cleaned = 0.00198939 Jy ! Component: 1550 - total flux cleaned = 0.00198921 Jy ! Component: 1600 - total flux cleaned = 0.0019126 Jy ! Component: 1650 - total flux cleaned = 0.00180083 Jy ! Component: 1700 - total flux cleaned = 0.00176444 Jy ! Component: 1750 - total flux cleaned = 0.00183656 Jy ! Component: 1800 - total flux cleaned = 0.0019434 Jy ! Component: 1850 - total flux cleaned = 0.00194343 Jy ! Component: 1900 - total flux cleaned = 0.00204752 Jy ! Component: 1950 - total flux cleaned = 0.00221905 Jy ! Component: 2000 - total flux cleaned = 0.00235441 Jy ! Component: 2050 - total flux cleaned = 0.00248851 Jy ! Component: 2100 - total flux cleaned = 0.00252163 Jy ! Component: 2150 - total flux cleaned = 0.00262053 Jy ! Component: 2200 - total flux cleaned = 0.00275089 Jy ! Component: 2250 - total flux cleaned = 0.00278318 Jy ! Component: 2300 - total flux cleaned = 0.0029115 Jy ! Component: 2350 - total flux cleaned = 0.00291108 Jy ! Component: 2400 - total flux cleaned = 0.00287944 Jy ! Component: 2450 - total flux cleaned = 0.00291098 Jy ! Component: 2500 - total flux cleaned = 0.00297359 Jy ! Component: 2550 - total flux cleaned = 0.00300478 Jy ! Component: 2600 - total flux cleaned = 0.00306657 Jy ! Component: 2650 - total flux cleaned = 0.00306667 Jy ! Component: 2700 - total flux cleaned = 0.00315914 Jy ! Component: 2750 - total flux cleaned = 0.00315913 Jy ! Component: 2800 - total flux cleaned = 0.00325119 Jy ! Component: 2850 - total flux cleaned = 0.0033428 Jy ! Component: 2900 - total flux cleaned = 0.00337336 Jy ! Component: 2950 - total flux cleaned = 0.00340378 Jy ! Component: 3000 - total flux cleaned = 0.00352545 Jy ! Component: 3050 - total flux cleaned = 0.0035863 Jy ! Component: 3100 - total flux cleaned = 0.00370807 Jy ! Component: 3150 - total flux cleaned = 0.00376905 Jy ! Component: 3200 - total flux cleaned = 0.00383006 Jy ! Component: 3250 - total flux cleaned = 0.00389089 Jy ! Component: 3300 - total flux cleaned = 0.00386044 Jy ! Component: 3350 - total flux cleaned = 0.00398258 Jy ! Component: 3400 - total flux cleaned = 0.00401305 Jy ! Component: 3450 - total flux cleaned = 0.00407436 Jy ! Component: 3500 - total flux cleaned = 0.0041357 Jy ! Component: 3550 - total flux cleaned = 0.00422791 Jy ! Component: 3600 - total flux cleaned = 0.0042588 Jy ! Component: 3650 - total flux cleaned = 0.00432058 Jy ! Component: 3700 - total flux cleaned = 0.00438253 Jy ! Component: 3750 - total flux cleaned = 0.00450694 Jy ! Component: 3800 - total flux cleaned = 0.00444466 Jy ! Component: 3850 - total flux cleaned = 0.00450701 Jy ! Component: 3900 - total flux cleaned = 0.00453809 Jy ! Component: 3950 - total flux cleaned = 0.00463211 Jy ! Component: 4000 - total flux cleaned = 0.00463221 Jy ! Component: 4050 - total flux cleaned = 0.00460042 Jy ! Total flux subtracted in 4096 components = 0.00466406 Jy ! Clean residual min=-0.001981 max=0.001772 Jy/beam ! Clean residual mean=0.000008 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.286946 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 342 components and 0.286946 Jy ![Exited script file: muppet] wmap "J1051+2119_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.152 x 7.86 at -24.11 degrees (North through East) ! Clean map min=-0.0068818 max=0.16576 Jy/beam ! Writing clean map to FITS file: J1051+2119_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.165757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000521754 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.944313 0.944313 1.88863 3.77725 7.5545 15.109 30.218 60.436 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.165 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.152 x 7.86 at -24.11 degrees (North through East) ! Clean map min=-0.0068818 max=0.16576 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1051+2119_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:53:02 2019