! Started logfile: J1048-4114_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:46:20 2019 obs J1048-4114_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1048-4114_S_2017_05_31_pus_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.721461 visibilities/baseline/integration-bin. ! Found source: J1048-4114 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 9480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1048-4114_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 324 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936218Jy sigma=0.005257 ! Fit after self-cal, rms=0.903381Jy sigma=0.005109 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.148 mas, bmaj=7.345 mas, bpa=-10.62 degrees ! Estimated noise=2425.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0777206 Jy ! Component: 100 - total flux cleaned = 0.10395 Jy ! Total flux subtracted in 100 components = 0.10395 Jy ! Clean residual min=-0.012343 max=0.015656 Jy/beam ! Clean residual mean=0.000174 rms=0.003580 Jy/beam ! Combined flux in latest and established models = 0.10395 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.10395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143009Jy sigma=0.000720 ! Fit after self-cal, rms=0.142780Jy sigma=0.000718 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.338 mas, bpa=-10.78 degrees ! Estimated noise=1420.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238345 Jy ! Component: 100 - total flux cleaned = 0.0361328 Jy ! Component: 150 - total flux cleaned = 0.0426724 Jy ! Component: 200 - total flux cleaned = 0.0447607 Jy ! Total flux subtracted in 200 components = 0.0447607 Jy ! Clean residual min=-0.012017 max=0.014908 Jy/beam ! Clean residual mean=0.000240 rms=0.004296 Jy/beam ! Combined flux in latest and established models = 0.148711 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.148711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139782Jy sigma=0.000690 ! Fit after self-cal, rms=0.139546Jy sigma=0.000689 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.24 KP 0.88 ! LA 0.81 MK 0.97 NL 1.32 OV 1.13 ! PT 1.09 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.36 KP 0.88 ! LA 0.81 MK 1.01 NL 1.83 OV 1.07 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.18 KP 0.92 ! LA 0.84 MK 1.07 NL 1.39 OV 1.00 ! PT 1.07 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.08 KP 1.03 ! LA 0.77 MK 1.10 NL 1.00* OV 1.00* ! PT 1.14 SC 1.00* ! ! ! Fit before self-cal, rms=0.139546Jy sigma=0.000689 ! Fit after self-cal, rms=0.173312Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.933 mas, bmaj=8.406 mas, bpa=-10.87 degrees ! Estimated noise=1452.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154604 Jy ! Component: 100 - total flux cleaned = 0.000146915 Jy ! Component: 150 - total flux cleaned = 0.000146759 Jy ! Component: 200 - total flux cleaned = 0.000239887 Jy ! Total flux subtracted in 200 components = 0.000239887 Jy ! Clean residual min=-0.009783 max=0.013683 Jy/beam ! Clean residual mean=0.000177 rms=0.003344 Jy/beam ! Combined flux in latest and established models = 0.14895 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 30 components and 0.14895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173123Jy sigma=0.000675 ! Fit after self-cal, rms=0.174173Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174173Jy sigma=0.000674 ! Fit after self-cal, rms=0.175462Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=8.388 mas, bpa=-10.84 degrees ! Estimated noise=1446.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.34238e-06 Jy ! Component: 100 - total flux cleaned = -0.000209621 Jy ! Component: 150 - total flux cleaned = -0.000213446 Jy ! Component: 200 - total flux cleaned = -0.000128751 Jy ! Total flux subtracted in 200 components = -0.000128751 Jy ! Clean residual min=-0.009398 max=0.013633 Jy/beam ! Clean residual mean=0.000172 rms=0.003255 Jy/beam ! Combined flux in latest and established models = 0.148822 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 30 components and 0.148822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175329Jy sigma=0.000674 ! Fit after self-cal, rms=0.175313Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117098 Jy ! Component: 100 - total flux cleaned = 0.000136823 Jy ! Component: 150 - total flux cleaned = 0.000214288 Jy ! Component: 200 - total flux cleaned = 0.00021539 Jy ! Total flux subtracted in 200 components = 0.00021539 Jy ! Clean residual min=-0.009232 max=0.013553 Jy/beam ! Clean residual mean=0.000172 rms=0.003239 Jy/beam ! Combined flux in latest and established models = 0.149037 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 31 components and 0.149037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175208Jy sigma=0.000673 ! Fit after self-cal, rms=0.175146Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175146Jy sigma=0.000673 ! Fit after self-cal, rms=0.171714Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=8.363 mas, bpa=-10.75 degrees ! Estimated noise=1432.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379321 Jy ! Component: 100 - total flux cleaned = -0.000537779 Jy ! Component: 150 - total flux cleaned = -0.000536797 Jy ! Component: 200 - total flux cleaned = -0.000468841 Jy ! Total flux subtracted in 200 components = -0.000468841 Jy ! Clean residual min=-0.009012 max=0.013421 Jy/beam ! Clean residual mean=0.000170 rms=0.003194 Jy/beam ! Combined flux in latest and established models = 0.148568 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.148568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171634Jy sigma=0.000673 ! Fit after self-cal, rms=0.171542Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.91598e-06 Jy ! Component: 100 - total flux cleaned = 5.66017e-05 Jy ! Component: 150 - total flux cleaned = 0.000121524 Jy ! Component: 200 - total flux cleaned = 0.000185838 Jy ! Total flux subtracted in 200 components = 0.000185838 Jy ! Clean residual min=-0.008929 max=0.013384 Jy/beam ! Clean residual mean=0.000170 rms=0.003186 Jy/beam ! Combined flux in latest and established models = 0.148754 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.148754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171474Jy sigma=0.000672 ! Fit after self-cal, rms=0.171432Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171432Jy sigma=0.000672 ! Fit after self-cal, rms=0.169314Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.794 mas, bmaj=28.11 mas, bpa=-3.4 degrees ! Estimated noise=1767.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000604141 Jy ! Component: 100 - total flux cleaned = 0.000602844 Jy ! Component: 150 - total flux cleaned = 0.00060157 Jy ! Component: 200 - total flux cleaned = 0.000601147 Jy ! Total flux subtracted in 200 components = 0.000601147 Jy ! Clean residual min=-0.013742 max=0.019609 Jy/beam ! Clean residual mean=0.000349 rms=0.005870 Jy/beam ! Combined flux in latest and established models = 0.149355 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 35 components and 0.149355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169333Jy sigma=0.000673 ! Fit after self-cal, rms=0.169311Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.11872e-05 Jy ! Component: 100 - total flux cleaned = 7.45715e-05 Jy ! Component: 150 - total flux cleaned = 7.60454e-05 Jy ! Component: 200 - total flux cleaned = 7.66413e-05 Jy ! Total flux subtracted in 200 components = 7.66413e-05 Jy ! Clean residual min=-0.013705 max=0.019612 Jy/beam ! Clean residual mean=0.000350 rms=0.005871 Jy/beam ! Combined flux in latest and established models = 0.149432 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.149432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169327Jy sigma=0.000673 ! Fit after self-cal, rms=0.169316Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=8.35 mas, bpa=-10.7 degrees ! Estimated noise=1422.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 8.35 at -10.7 degrees (North through East) ! Clean map min=-0.012492 max=0.10017 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.171 mas, bmaj=7.341 mas, bpa=-10.68 degrees ! Estimated noise=2467.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0762793 Jy ! Component: 100 - total flux cleaned = 0.105059 Jy ! Component: 150 - total flux cleaned = 0.12125 Jy ! Component: 200 - total flux cleaned = 0.129903 Jy ! Total flux subtracted in 200 components = 0.129903 Jy ! Clean residual min=-0.012132 max=0.011929 Jy/beam ! Clean residual mean=0.000072 rms=0.002635 Jy/beam ! Combined flux in latest and established models = 0.129903 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.129903 Jy ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=8.35 mas, bpa=-10.7 degrees ! Estimated noise=1422.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00996632 Jy ! Component: 100 - total flux cleaned = 0.0115651 Jy ! Component: 150 - total flux cleaned = 0.0121584 Jy ! Component: 200 - total flux cleaned = 0.0128818 Jy ! Total flux subtracted in 200 components = 0.0128818 Jy ! Clean residual min=-0.010032 max=0.012556 Jy/beam ! Clean residual mean=0.000174 rms=0.003309 Jy/beam ! Combined flux in latest and established models = 0.142785 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.142785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.794 mas, bmaj=28.11 mas, bpa=-3.4 degrees ! Estimated noise=1767.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543272 Jy ! Component: 100 - total flux cleaned = 0.00543162 Jy ! Component: 150 - total flux cleaned = 0.00543383 Jy ! Component: 200 - total flux cleaned = 0.0054363 Jy ! Total flux subtracted in 200 components = 0.0054363 Jy ! Clean residual min=-0.014103 max=0.019514 Jy/beam ! Clean residual mean=0.000351 rms=0.005903 Jy/beam ! Combined flux in latest and established models = 0.148221 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.86978e-06 Jy ! Component: 100 - total flux cleaned = 4.73536e-06 Jy ! Component: 150 - total flux cleaned = 5.70489e-05 Jy ! Component: 200 - total flux cleaned = 0.000108582 Jy ! Total flux subtracted in 200 components = 0.000108582 Jy ! Clean residual min=-0.014004 max=0.019559 Jy/beam ! Clean residual mean=0.000351 rms=0.005893 Jy/beam ! Combined flux in latest and established models = 0.14833 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.14833 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=8.35 mas, bpa=-10.7 degrees ! Estimated noise=1422.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00255664 Jy ! Component: 100 - total flux cleaned = -0.00240326 Jy ! Component: 150 - total flux cleaned = -0.0024071 Jy ! Component: 200 - total flux cleaned = -0.00239674 Jy ! Total flux subtracted in 200 components = -0.00239674 Jy ! Clean residual min=-0.009546 max=0.013012 Jy/beam ! Clean residual mean=0.000171 rms=0.003237 Jy/beam ! Combined flux in latest and established models = 0.145933 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.145933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169643Jy sigma=0.000674 ! Fit after self-cal, rms=0.169578Jy sigma=0.000674 wmodel J1048-4114_S_2017_05_31_pus_map.mod ! Writing 45 model components to file: J1048-4114_S_2017_05_31_pus_map.mod wobs J1048-4114_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1048-4114_S_2017_05_31_pus_uvs.fits wwins J1048-4114_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1048-4114_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536275 Jy ! Component: 100 - total flux cleaned = 0.00842656 Jy ! Component: 150 - total flux cleaned = 0.0102185 Jy ! Component: 200 - total flux cleaned = 0.011967 Jy ! Component: 250 - total flux cleaned = 0.0135603 Jy ! Component: 300 - total flux cleaned = 0.0144539 Jy ! Component: 350 - total flux cleaned = 0.0152798 Jy ! Component: 400 - total flux cleaned = 0.0159518 Jy ! Component: 450 - total flux cleaned = 0.016129 Jy ! Component: 500 - total flux cleaned = 0.0164647 Jy ! Component: 550 - total flux cleaned = 0.0165439 Jy ! Component: 600 - total flux cleaned = 0.0163926 Jy ! Component: 650 - total flux cleaned = 0.0161047 Jy ! Component: 700 - total flux cleaned = 0.015902 Jy ! Component: 750 - total flux cleaned = 0.015838 Jy ! Component: 800 - total flux cleaned = 0.0160889 Jy ! Component: 850 - total flux cleaned = 0.016388 Jy ! Component: 900 - total flux cleaned = 0.0164455 Jy ! Component: 950 - total flux cleaned = 0.0166713 Jy ! Component: 1000 - total flux cleaned = 0.0168883 Jy ! Component: 1050 - total flux cleaned = 0.0170972 Jy ! Component: 1100 - total flux cleaned = 0.0170467 Jy ! Component: 1150 - total flux cleaned = 0.0171465 Jy ! Component: 1200 - total flux cleaned = 0.0171483 Jy ! Component: 1250 - total flux cleaned = 0.0172878 Jy ! Component: 1300 - total flux cleaned = 0.0171519 Jy ! Component: 1350 - total flux cleaned = 0.0171525 Jy ! Component: 1400 - total flux cleaned = 0.0172379 Jy ! Component: 1450 - total flux cleaned = 0.0171537 Jy ! Component: 1500 - total flux cleaned = 0.0173577 Jy ! Component: 1550 - total flux cleaned = 0.0174374 Jy ! Component: 1600 - total flux cleaned = 0.0175159 Jy ! Component: 1650 - total flux cleaned = 0.0177071 Jy ! Component: 1700 - total flux cleaned = 0.0178573 Jy ! Component: 1750 - total flux cleaned = 0.0180414 Jy ! Component: 1800 - total flux cleaned = 0.0182946 Jy ! Component: 1850 - total flux cleaned = 0.0185076 Jy ! Component: 1900 - total flux cleaned = 0.0186825 Jy ! Component: 1950 - total flux cleaned = 0.0189223 Jy ! Component: 2000 - total flux cleaned = 0.0191578 Jy ! Component: 2050 - total flux cleaned = 0.0192902 Jy ! Component: 2100 - total flux cleaned = 0.0194205 Jy ! Component: 2150 - total flux cleaned = 0.0195815 Jy ! Component: 2200 - total flux cleaned = 0.01974 Jy ! Component: 2250 - total flux cleaned = 0.0199279 Jy ! Component: 2300 - total flux cleaned = 0.0201439 Jy ! Component: 2350 - total flux cleaned = 0.0202356 Jy ! Component: 2400 - total flux cleaned = 0.0204471 Jy ! Component: 2450 - total flux cleaned = 0.0205664 Jy ! Component: 2500 - total flux cleaned = 0.0207139 Jy ! Component: 2550 - total flux cleaned = 0.0208306 Jy ! Component: 2600 - total flux cleaned = 0.0210332 Jy ! Component: 2650 - total flux cleaned = 0.0211771 Jy ! Component: 2700 - total flux cleaned = 0.021377 Jy ! Component: 2750 - total flux cleaned = 0.0216035 Jy ! Component: 2800 - total flux cleaned = 0.0217721 Jy ! Component: 2850 - total flux cleaned = 0.0219396 Jy ! Component: 2900 - total flux cleaned = 0.0220786 Jy ! Component: 2950 - total flux cleaned = 0.0222169 Jy ! Component: 3000 - total flux cleaned = 0.022437 Jy ! Component: 3050 - total flux cleaned = 0.022574 Jy ! Component: 3100 - total flux cleaned = 0.0227377 Jy ! Component: 3150 - total flux cleaned = 0.0228736 Jy ! Component: 3200 - total flux cleaned = 0.0230363 Jy ! Component: 3250 - total flux cleaned = 0.0231444 Jy ! Component: 3300 - total flux cleaned = 0.0232793 Jy ! Component: 3350 - total flux cleaned = 0.0234139 Jy ! Component: 3400 - total flux cleaned = 0.0234675 Jy ! Component: 3450 - total flux cleaned = 0.0235748 Jy ! Component: 3500 - total flux cleaned = 0.0236551 Jy ! Component: 3550 - total flux cleaned = 0.0237085 Jy ! Component: 3600 - total flux cleaned = 0.023842 Jy ! Component: 3650 - total flux cleaned = 0.0238686 Jy ! Component: 3700 - total flux cleaned = 0.0239486 Jy ! Component: 3750 - total flux cleaned = 0.0239753 Jy ! Component: 3800 - total flux cleaned = 0.0239754 Jy ! Component: 3850 - total flux cleaned = 0.0239753 Jy ! Component: 3900 - total flux cleaned = 0.0240022 Jy ! Component: 3950 - total flux cleaned = 0.0240289 Jy ! Component: 4000 - total flux cleaned = 0.023975 Jy ! Component: 4050 - total flux cleaned = 0.024029 Jy ! Total flux subtracted in 4096 components = 0.0240291 Jy ! Clean residual min=-0.001676 max=0.001613 Jy/beam ! Clean residual mean=0.000050 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.169962 Jy keep ! Adding 363 model components to the UV plane model. ! The established model now contains 408 components and 0.169962 Jy ![Exited script file: muppet] wmap "J1048-4114_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 8.35 at -10.7 degrees (North through East) ! Clean map min=-0.007843 max=0.1012 Jy/beam ! Writing clean map to FITS file: J1048-4114_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101197 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000532516 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.57866 1.57866 3.15732 6.31464 12.6293 25.2585 50.5171 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 8.35 at -10.7 degrees (North through East) ! Clean map min=-0.007843 max=0.1012 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1048-4114_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:46:25 2019