! Started logfile: J1048-1909_S_2017_10_09_pus_uvs.log on Sun May 12 13:10:19 2019 obs J1048-1909_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1048-1909_S_2017_10_09_pus_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.390046 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1048-1909 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1048-1909_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.374996Jy sigma=0.003037 ! Fit after self-cal, rms=0.351460Jy sigma=0.002872 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.644 mas, bmaj=13.98 mas, bpa=-15.29 degrees ! Estimated noise=3185.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.579003 Jy ! Component: 100 - total flux cleaned = 0.762194 Jy ! Total flux subtracted in 100 components = 0.762194 Jy ! Clean residual min=-0.049026 max=0.085370 Jy/beam ! Clean residual mean=-0.000436 rms=0.016955 Jy/beam ! Combined flux in latest and established models = 0.762195 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.762195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225524Jy sigma=0.001652 ! Fit after self-cal, rms=0.225411Jy sigma=0.001650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.064 mas, bmaj=14.74 mas, bpa=-14.57 degrees ! Estimated noise=2742.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110125 Jy ! Component: 100 - total flux cleaned = 0.172373 Jy ! Component: 150 - total flux cleaned = 0.210123 Jy ! Component: 200 - total flux cleaned = 0.233628 Jy ! Total flux subtracted in 200 components = 0.233628 Jy ! Clean residual min=-0.028584 max=0.028405 Jy/beam ! Clean residual mean=-0.000148 rms=0.008342 Jy/beam ! Combined flux in latest and established models = 0.995822 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 55 components and 0.995822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157018Jy sigma=0.001137 ! Fit after self-cal, rms=0.156841Jy sigma=0.001136 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.87 HN 1.01 KP 1.07 ! LA 1.02 MK 0.98 NL 0.93 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.59 FD 0.94 HN 1.01 KP 1.03 ! LA 0.96 MK 1.00 NL 1.03 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 1.00 KP 0.90 ! LA 0.76 MK 1.02 NL 1.20 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00 KP 1.00* ! LA 1.20 MK 1.09 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.156841Jy sigma=0.001136 ! Fit after self-cal, rms=0.105370Jy sigma=0.000759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=15.1 mas, bpa=-14.58 degrees ! Estimated noise=2761.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00341589 Jy ! Component: 100 - total flux cleaned = -0.00398708 Jy ! Component: 150 - total flux cleaned = -0.00471262 Jy ! Component: 200 - total flux cleaned = -0.00532077 Jy ! Total flux subtracted in 200 components = -0.00532077 Jy ! Clean residual min=-0.022018 max=0.016496 Jy/beam ! Clean residual mean=-0.000030 rms=0.004946 Jy/beam ! Combined flux in latest and established models = 0.990502 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.990502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103976Jy sigma=0.000749 ! Fit after self-cal, rms=0.104024Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104024Jy sigma=0.000749 ! Fit after self-cal, rms=0.104798Jy sigma=0.000746 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=15.24 mas, bpa=-14.62 degrees ! Estimated noise=2772.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00388601 Jy ! Component: 100 - total flux cleaned = -0.00456564 Jy ! Component: 150 - total flux cleaned = -0.00535098 Jy ! Component: 200 - total flux cleaned = -0.00567993 Jy ! Total flux subtracted in 200 components = -0.00567993 Jy ! Clean residual min=-0.020476 max=0.015965 Jy/beam ! Clean residual mean=-0.000032 rms=0.004669 Jy/beam ! Combined flux in latest and established models = 0.984822 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.984822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103776Jy sigma=0.000740 ! Fit after self-cal, rms=0.103770Jy sigma=0.000739 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185357 Jy ! Component: 100 - total flux cleaned = -0.000325095 Jy ! Component: 150 - total flux cleaned = -0.000326677 Jy ! Component: 200 - total flux cleaned = -0.000203169 Jy ! Total flux subtracted in 200 components = -0.000203169 Jy ! Clean residual min=-0.020182 max=0.015873 Jy/beam ! Clean residual mean=-0.000032 rms=0.004614 Jy/beam ! Combined flux in latest and established models = 0.984619 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.984619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103420Jy sigma=0.000737 ! Fit after self-cal, rms=0.103416Jy sigma=0.000737 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103416Jy sigma=0.000737 ! Fit after self-cal, rms=0.104403Jy sigma=0.000734 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=15.42 mas, bpa=-14.66 degrees ! Estimated noise=2786.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00344368 Jy ! Component: 100 - total flux cleaned = -0.00427501 Jy ! Component: 150 - total flux cleaned = -0.00491889 Jy ! Component: 200 - total flux cleaned = -0.00586205 Jy ! Total flux subtracted in 200 components = -0.00586205 Jy ! Clean residual min=-0.018814 max=0.015250 Jy/beam ! Clean residual mean=-0.000033 rms=0.004337 Jy/beam ! Combined flux in latest and established models = 0.978757 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.978757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103623Jy sigma=0.000729 ! Fit after self-cal, rms=0.103623Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384599 Jy ! Component: 100 - total flux cleaned = -0.000614388 Jy ! Component: 150 - total flux cleaned = -0.000825631 Jy ! Component: 200 - total flux cleaned = -0.000720081 Jy ! Total flux subtracted in 200 components = -0.000720081 Jy ! Clean residual min=-0.018590 max=0.015155 Jy/beam ! Clean residual mean=-0.000035 rms=0.004294 Jy/beam ! Combined flux in latest and established models = 0.978037 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.978037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103389Jy sigma=0.000728 ! Fit after self-cal, rms=0.103387Jy sigma=0.000728 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103387Jy sigma=0.000728 ! Fit after self-cal, rms=0.104315Jy sigma=0.000725 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.858 mas, bmaj=19.77 mas, bpa=0.5454 degrees ! Estimated noise=3432.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019018 Jy ! Component: 100 - total flux cleaned = -0.00235959 Jy ! Component: 150 - total flux cleaned = -0.00246778 Jy ! Component: 200 - total flux cleaned = -0.00246627 Jy ! Total flux subtracted in 200 components = -0.00246627 Jy ! Clean residual min=-0.019621 max=0.018098 Jy/beam ! Clean residual mean=-0.000052 rms=0.004817 Jy/beam ! Combined flux in latest and established models = 0.97557 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 107 components and 0.97557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104199Jy sigma=0.000724 ! Fit after self-cal, rms=0.104192Jy sigma=0.000724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.86181e-05 Jy ! Component: 100 - total flux cleaned = -5.83679e-05 Jy ! Component: 150 - total flux cleaned = 3.60815e-05 Jy ! Component: 200 - total flux cleaned = 3.50415e-05 Jy ! Total flux subtracted in 200 components = 3.50415e-05 Jy ! Clean residual min=-0.019745 max=0.017890 Jy/beam ! Clean residual mean=-0.000052 rms=0.004760 Jy/beam ! Combined flux in latest and established models = 0.975605 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 111 components and 0.975605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104161Jy sigma=0.000723 ! Fit after self-cal, rms=0.104156Jy sigma=0.000723 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=15.57 mas, bpa=-14.7 degrees ! Estimated noise=2798.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 15.57 at -14.7 degrees (North through East) ! Clean map min=-0.018621 max=0.74755 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104156Jy sigma=0.000723 ! Fit after self-cal, rms=0.096830Jy sigma=0.000663 ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=15.59 mas, bpa=-14.69 degrees ! Estimated noise=2797.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00370704 Jy ! Component: 100 - total flux cleaned = -0.00421936 Jy ! Component: 150 - total flux cleaned = -0.0046432 Jy ! Component: 200 - total flux cleaned = -0.00500519 Jy ! Total flux subtracted in 200 components = -0.00500519 Jy ! Clean residual min=-0.017506 max=0.014563 Jy/beam ! Clean residual mean=-0.000035 rms=0.003971 Jy/beam ! Combined flux in latest and established models = 0.9706 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.9706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096183Jy sigma=0.000659 ! Fit after self-cal, rms=0.096175Jy sigma=0.000659 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.70369e-05 Jy ! Component: 100 - total flux cleaned = -0.000213015 Jy ! Component: 150 - total flux cleaned = -0.00030335 Jy ! Component: 200 - total flux cleaned = -0.000305596 Jy ! Total flux subtracted in 200 components = -0.000305596 Jy ! Clean residual min=-0.017093 max=0.014527 Jy/beam ! Clean residual mean=-0.000036 rms=0.003939 Jy/beam ! Combined flux in latest and established models = 0.970295 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.970295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095984Jy sigma=0.000658 ! Fit after self-cal, rms=0.095977Jy sigma=0.000658 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095977Jy sigma=0.000658 ! Fit after self-cal, rms=0.096801Jy sigma=0.000656 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.639 mas, bmaj=14.94 mas, bpa=-15.3 degrees ! Estimated noise=3305.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.592775 Jy ! Component: 100 - total flux cleaned = 0.75935 Jy ! Component: 150 - total flux cleaned = 0.836287 Jy ! Component: 200 - total flux cleaned = 0.881035 Jy ! Total flux subtracted in 200 components = 0.881035 Jy ! Clean residual min=-0.022491 max=0.029257 Jy/beam ! Clean residual mean=-0.000176 rms=0.006431 Jy/beam ! Combined flux in latest and established models = 0.881035 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.881035 Jy ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=15.73 mas, bpa=-14.73 degrees ! Estimated noise=2806.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (33.5, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366388 Jy ! Component: 100 - total flux cleaned = 0.0566598 Jy ! Component: 150 - total flux cleaned = 0.0655114 Jy ! Component: 200 - total flux cleaned = 0.0682198 Jy ! Total flux subtracted in 200 components = 0.0682198 Jy ! Clean residual min=-0.013713 max=0.013223 Jy/beam ! Clean residual mean=-0.000070 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 0.949255 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 80 components and 0.949255 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.875 mas, bmaj=19.91 mas, bpa=0.2948 degrees ! Estimated noise=3438.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00886302 Jy ! Component: 100 - total flux cleaned = 0.010542 Jy ! Component: 150 - total flux cleaned = 0.0108029 Jy ! Component: 200 - total flux cleaned = 0.0112569 Jy ! Total flux subtracted in 200 components = 0.0112569 Jy ! Clean residual min=-0.009981 max=0.013365 Jy/beam ! Clean residual mean=-0.000070 rms=0.003429 Jy/beam ! Combined flux in latest and established models = 0.960512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.24551e-06 Jy ! Component: 100 - total flux cleaned = -0.000365982 Jy ! Component: 150 - total flux cleaned = -0.000199093 Jy ! Component: 200 - total flux cleaned = -0.000349528 Jy ! Total flux subtracted in 200 components = -0.000349528 Jy ! Clean residual min=-0.009234 max=0.012831 Jy/beam ! Clean residual mean=-0.000066 rms=0.003197 Jy/beam ! Combined flux in latest and established models = 0.960162 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.960162 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=15.73 mas, bpa=-14.73 degrees ! Estimated noise=2806.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220627 Jy ! Component: 100 - total flux cleaned = -0.00216623 Jy ! Component: 150 - total flux cleaned = -0.00259866 Jy ! Component: 200 - total flux cleaned = -0.00313849 Jy ! Total flux subtracted in 200 components = -0.00313849 Jy ! Clean residual min=-0.009302 max=0.011143 Jy/beam ! Clean residual mean=-0.000036 rms=0.002610 Jy/beam ! Combined flux in latest and established models = 0.957024 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 0.957024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092875Jy sigma=0.000629 ! Fit after self-cal, rms=0.092676Jy sigma=0.000627 wmodel J1048-1909_S_2017_10_09_pus_map.mod ! Writing 127 model components to file: J1048-1909_S_2017_10_09_pus_map.mod wobs J1048-1909_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1048-1909_S_2017_10_09_pus_uvs.fits wwins J1048-1909_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1048-1909_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00460524 Jy ! Component: 100 - total flux cleaned = 0.00688886 Jy ! Component: 150 - total flux cleaned = 0.00877024 Jy ! Component: 200 - total flux cleaned = 0.00967313 Jy ! Component: 250 - total flux cleaned = 0.0102584 Jy ! Component: 300 - total flux cleaned = 0.00983665 Jy ! Component: 350 - total flux cleaned = 0.0100316 Jy ! Component: 400 - total flux cleaned = 0.0104105 Jy ! Component: 450 - total flux cleaned = 0.0110307 Jy ! Component: 500 - total flux cleaned = 0.0115335 Jy ! Component: 550 - total flux cleaned = 0.0121696 Jy ! Component: 600 - total flux cleaned = 0.0126221 Jy ! Component: 650 - total flux cleaned = 0.0129845 Jy ! Component: 700 - total flux cleaned = 0.0135369 Jy ! Component: 750 - total flux cleaned = 0.0139994 Jy ! Component: 800 - total flux cleaned = 0.0144428 Jy ! Component: 850 - total flux cleaned = 0.0149306 Jy ! Component: 900 - total flux cleaned = 0.0154564 Jy ! Component: 950 - total flux cleaned = 0.0160178 Jy ! Component: 1000 - total flux cleaned = 0.0166168 Jy ! Component: 1050 - total flux cleaned = 0.0171973 Jy ! Component: 1100 - total flux cleaned = 0.0175557 Jy ! Component: 1150 - total flux cleaned = 0.0179051 Jy ! Component: 1200 - total flux cleaned = 0.0181487 Jy ! Component: 1250 - total flux cleaned = 0.0183377 Jy ! Component: 1300 - total flux cleaned = 0.0185693 Jy ! Component: 1350 - total flux cleaned = 0.0187053 Jy ! Component: 1400 - total flux cleaned = 0.0187937 Jy ! Component: 1450 - total flux cleaned = 0.0188369 Jy ! Component: 1500 - total flux cleaned = 0.0188799 Jy ! Component: 1550 - total flux cleaned = 0.018963 Jy ! Component: 1600 - total flux cleaned = 0.018922 Jy ! Component: 1650 - total flux cleaned = 0.0190019 Jy ! Component: 1700 - total flux cleaned = 0.0191192 Jy ! Component: 1750 - total flux cleaned = 0.019196 Jy ! Component: 1800 - total flux cleaned = 0.019272 Jy ! Component: 1850 - total flux cleaned = 0.0193844 Jy ! Component: 1900 - total flux cleaned = 0.0195321 Jy ! Component: 1950 - total flux cleaned = 0.0197495 Jy ! Component: 2000 - total flux cleaned = 0.019928 Jy ! Component: 2050 - total flux cleaned = 0.0201389 Jy ! Component: 2100 - total flux cleaned = 0.0203123 Jy ! Component: 2150 - total flux cleaned = 0.0204496 Jy ! Component: 2200 - total flux cleaned = 0.0205849 Jy ! Component: 2250 - total flux cleaned = 0.020819 Jy ! Component: 2300 - total flux cleaned = 0.0210503 Jy ! Component: 2350 - total flux cleaned = 0.0212794 Jy ! Component: 2400 - total flux cleaned = 0.0215712 Jy ! Component: 2450 - total flux cleaned = 0.0218279 Jy ! Component: 2500 - total flux cleaned = 0.0220188 Jy ! Component: 2550 - total flux cleaned = 0.022145 Jy ! Component: 2600 - total flux cleaned = 0.0223645 Jy ! Component: 2650 - total flux cleaned = 0.0225821 Jy ! Component: 2700 - total flux cleaned = 0.0227361 Jy ! Component: 2750 - total flux cleaned = 0.02292 Jy ! Component: 2800 - total flux cleaned = 0.0231637 Jy ! Component: 2850 - total flux cleaned = 0.0233452 Jy ! Component: 2900 - total flux cleaned = 0.0234956 Jy ! Component: 2950 - total flux cleaned = 0.0236452 Jy ! Component: 3000 - total flux cleaned = 0.0238534 Jy ! Component: 3050 - total flux cleaned = 0.0240603 Jy ! Component: 3100 - total flux cleaned = 0.0242074 Jy ! Component: 3150 - total flux cleaned = 0.0244418 Jy ! Component: 3200 - total flux cleaned = 0.0247335 Jy ! Component: 3250 - total flux cleaned = 0.0249369 Jy ! Component: 3300 - total flux cleaned = 0.0251393 Jy ! Component: 3350 - total flux cleaned = 0.0253407 Jy ! Component: 3400 - total flux cleaned = 0.0255413 Jy ! Component: 3450 - total flux cleaned = 0.0257412 Jy ! Component: 3500 - total flux cleaned = 0.0260255 Jy ! Component: 3550 - total flux cleaned = 0.0261387 Jy ! Component: 3600 - total flux cleaned = 0.0263365 Jy ! Component: 3650 - total flux cleaned = 0.0265058 Jy ! Component: 3700 - total flux cleaned = 0.0266742 Jy ! Component: 3750 - total flux cleaned = 0.0268144 Jy ! Component: 3800 - total flux cleaned = 0.0270102 Jy ! Component: 3850 - total flux cleaned = 0.0270938 Jy ! Component: 3900 - total flux cleaned = 0.0272332 Jy ! Component: 3950 - total flux cleaned = 0.0274001 Jy ! Component: 4000 - total flux cleaned = 0.0275114 Jy ! Component: 4050 - total flux cleaned = 0.0276225 Jy ! Total flux subtracted in 4096 components = 0.0276503 Jy ! Clean residual min=-0.001739 max=0.001503 Jy/beam ! Clean residual mean=-0.000008 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.984674 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 403 components and 0.984674 Jy ![Exited script file: muppet] wmap "J1048-1909_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 15.73 at -14.73 degrees (North through East) ! Clean map min=-0.018439 max=0.75522 Jy/beam ! Writing clean map to FITS file: J1048-1909_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.755222 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000483251 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.191964 0.191964 0.383928 0.767855 1.53571 3.07142 6.14284 12.2857 24.5714 49.1427 98.2855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.755 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 15.73 at -14.73 degrees (North through East) ! Clean map min=-0.018439 max=0.75522 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1048-1909_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:10:24 2019