! Started logfile: J1048-1909_S_2017_05_27_pus_uvs.log on Fri May 3 11:04:42 2019 obs J1048-1909_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1048-1909_S_2017_05_27_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.844444 visibilities/baseline/integration-bin. ! Found source: J1048-1909 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 1520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1048-1909_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.307010Jy sigma=0.001598 ! Fit after self-cal, rms=0.286697Jy sigma=0.001421 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=7.476 mas, bpa=-11.06 degrees ! Estimated noise=3750.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.869909 Jy ! Component: 100 - total flux cleaned = 1.06586 Jy ! Total flux subtracted in 100 components = 1.06586 Jy ! Clean residual min=-0.048533 max=0.075015 Jy/beam ! Clean residual mean=0.000083 rms=0.013332 Jy/beam ! Combined flux in latest and established models = 1.06586 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.06586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257190Jy sigma=0.001230 ! Fit after self-cal, rms=0.256945Jy sigma=0.001228 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=8.113 mas, bpa=-8.587 degrees ! Estimated noise=3137.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.076282 Jy ! Component: 100 - total flux cleaned = 0.114303 Jy ! Component: 150 - total flux cleaned = 0.136285 Jy ! Component: 200 - total flux cleaned = 0.149068 Jy ! Total flux subtracted in 200 components = 0.149068 Jy ! Clean residual min=-0.044306 max=0.029449 Jy/beam ! Clean residual mean=-0.000039 rms=0.009240 Jy/beam ! Combined flux in latest and established models = 1.21492 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 1.21492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221588Jy sigma=0.001082 ! Fit after self-cal, rms=0.221414Jy sigma=0.001081 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.03 KP 1.02 ! LA 1.02 MK 0.94 NL 0.89 OV 1.02 ! PT 1.07 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.07 KP 0.97 ! LA 0.96 MK 0.95 NL 1.02 OV 1.05 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 1.07 HN 1.10 KP 1.01 ! LA 1.00 MK 1.05 NL 0.97 OV 0.97 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.99 KP 1.00* ! LA 0.63 MK 1.26 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.221414Jy sigma=0.001081 ! Fit after self-cal, rms=0.105900Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.067 mas, bpa=-8.384 degrees ! Estimated noise=3127.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00453215 Jy ! Component: 100 - total flux cleaned = -0.00544217 Jy ! Component: 150 - total flux cleaned = -0.00595415 Jy ! Component: 200 - total flux cleaned = -0.00638065 Jy ! Total flux subtracted in 200 components = -0.00638065 Jy ! Clean residual min=-0.010962 max=0.012362 Jy/beam ! Clean residual mean=0.000020 rms=0.002645 Jy/beam ! Combined flux in latest and established models = 1.20854 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 1.20854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105091Jy sigma=0.000673 ! Fit after self-cal, rms=0.104898Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104898Jy sigma=0.000672 ! Fit after self-cal, rms=0.104762Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.062 mas, bpa=-8.308 degrees ! Estimated noise=3124.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184188 Jy ! Component: 100 - total flux cleaned = -0.00258296 Jy ! Component: 150 - total flux cleaned = -0.00320043 Jy ! Component: 200 - total flux cleaned = -0.00341146 Jy ! Total flux subtracted in 200 components = -0.00341146 Jy ! Clean residual min=-0.009549 max=0.011930 Jy/beam ! Clean residual mean=0.000021 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 1.20513 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 1.20513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104443Jy sigma=0.000669 ! Fit after self-cal, rms=0.104409Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-79, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979748 Jy ! Component: 100 - total flux cleaned = 0.0118286 Jy ! Component: 150 - total flux cleaned = 0.0135011 Jy ! Component: 200 - total flux cleaned = 0.0148082 Jy ! Total flux subtracted in 200 components = 0.0148082 Jy ! Clean residual min=-0.009021 max=0.007620 Jy/beam ! Clean residual mean=0.000007 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 1.21994 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 65 components and 1.21994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103402Jy sigma=0.000662 ! Fit after self-cal, rms=0.103378Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103378Jy sigma=0.000662 ! Fit after self-cal, rms=0.103241Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.058 mas, bpa=-8.263 degrees ! Estimated noise=3120.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10713e-05 Jy ! Component: 100 - total flux cleaned = 0.000258865 Jy ! Component: 150 - total flux cleaned = 0.000147022 Jy ! Component: 200 - total flux cleaned = 0.000245771 Jy ! Total flux subtracted in 200 components = 0.000245771 Jy ! Clean residual min=-0.008506 max=0.007395 Jy/beam ! Clean residual mean=0.000005 rms=0.001989 Jy/beam ! Combined flux in latest and established models = 1.22019 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 1.22019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102992Jy sigma=0.000660 ! Fit after self-cal, rms=0.102985Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.34052e-05 Jy ! Component: 100 - total flux cleaned = 0.000153943 Jy ! Component: 150 - total flux cleaned = 0.00039813 Jy ! Component: 200 - total flux cleaned = 0.000320409 Jy ! Total flux subtracted in 200 components = 0.000320409 Jy ! Clean residual min=-0.008340 max=0.007370 Jy/beam ! Clean residual mean=0.000004 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 1.22051 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 1.22051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102846Jy sigma=0.000660 ! Fit after self-cal, rms=0.102835Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102835Jy sigma=0.000659 ! Fit after self-cal, rms=0.102740Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.476 mas, bmaj=16.42 mas, bpa=-8.375 degrees ! Estimated noise=3973.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015301 Jy ! Component: 100 - total flux cleaned = -0.00185702 Jy ! Component: 150 - total flux cleaned = -0.00246402 Jy ! Component: 200 - total flux cleaned = -0.00292027 Jy ! Total flux subtracted in 200 components = -0.00292027 Jy ! Clean residual min=-0.007702 max=0.008518 Jy/beam ! Clean residual mean=0.000011 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 1.21759 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 1.21759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102759Jy sigma=0.000659 ! Fit after self-cal, rms=0.102670Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000428782 Jy ! Component: 100 - total flux cleaned = -0.000799269 Jy ! Component: 150 - total flux cleaned = -0.00103896 Jy ! Component: 200 - total flux cleaned = -0.00110721 Jy ! Total flux subtracted in 200 components = -0.00110721 Jy ! Clean residual min=-0.007430 max=0.008198 Jy/beam ! Clean residual mean=0.000014 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 1.21648 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 1.21648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102758Jy sigma=0.000659 ! Fit after self-cal, rms=0.102689Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.054 mas, bpa=-8.233 degrees ! Estimated noise=3117.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.167 x 8.054 at -8.233 degrees (North through East) ! Clean map min=-0.0072362 max=1.086 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102689Jy sigma=0.000659 ! Fit after self-cal, rms=0.095071Jy sigma=0.000611 ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.044 mas, bpa=-8.081 degrees ! Estimated noise=3114.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000856162 Jy ! Component: 100 - total flux cleaned = 0.000939795 Jy ! Component: 150 - total flux cleaned = 0.000627843 Jy ! Component: 200 - total flux cleaned = 0.000482548 Jy ! Total flux subtracted in 200 components = 0.000482548 Jy ! Clean residual min=-0.006975 max=0.006954 Jy/beam ! Clean residual mean=0.000005 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 1.21696 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 1.21696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094908Jy sigma=0.000610 ! Fit after self-cal, rms=0.094904Jy sigma=0.000610 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330395 Jy ! Component: 100 - total flux cleaned = -0.000331287 Jy ! Component: 150 - total flux cleaned = -0.000269782 Jy ! Component: 200 - total flux cleaned = -0.000391166 Jy ! Total flux subtracted in 200 components = -0.000391166 Jy ! Clean residual min=-0.006906 max=0.006953 Jy/beam ! Clean residual mean=0.000005 rms=0.001773 Jy/beam ! Combined flux in latest and established models = 1.21657 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 1.21657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094806Jy sigma=0.000609 ! Fit after self-cal, rms=0.094807Jy sigma=0.000609 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094807Jy sigma=0.000609 ! Fit after self-cal, rms=0.094753Jy sigma=0.000609 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=7.397 mas, bpa=-10.57 degrees ! Estimated noise=3698.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.856995 Jy ! Component: 100 - total flux cleaned = 1.05448 Jy ! Component: 150 - total flux cleaned = 1.12213 Jy ! Component: 200 - total flux cleaned = 1.15056 Jy ! Total flux subtracted in 200 components = 1.15056 Jy ! Clean residual min=-0.012792 max=0.021177 Jy/beam ! Clean residual mean=0.000045 rms=0.003543 Jy/beam ! Combined flux in latest and established models = 1.15056 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.15056 Jy ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.042 mas, bpa=-8.076 degrees ! Estimated noise=3113.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022799 Jy ! Component: 100 - total flux cleaned = 0.0350112 Jy ! Component: 150 - total flux cleaned = 0.0435537 Jy ! Component: 200 - total flux cleaned = 0.0483142 Jy ! Total flux subtracted in 200 components = 0.0483142 Jy ! Clean residual min=-0.007151 max=0.006686 Jy/beam ! Clean residual mean=0.000024 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 1.19888 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 56 components and 1.19888 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.48 mas, bmaj=16.39 mas, bpa=-8.278 degrees ! Estimated noise=3971.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00696878 Jy ! Component: 100 - total flux cleaned = 0.0102965 Jy ! Component: 150 - total flux cleaned = 0.0111364 Jy ! Component: 200 - total flux cleaned = 0.0117331 Jy ! Total flux subtracted in 200 components = 0.0117331 Jy ! Clean residual min=-0.006906 max=0.007220 Jy/beam ! Clean residual mean=0.000030 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 1.21061 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624159 Jy ! Component: 100 - total flux cleaned = 0.000995126 Jy ! Component: 150 - total flux cleaned = 0.00141044 Jy ! Component: 200 - total flux cleaned = 0.00178063 Jy ! Total flux subtracted in 200 components = 0.00178063 Jy ! Clean residual min=-0.006645 max=0.007414 Jy/beam ! Clean residual mean=0.000029 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 1.21239 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 110 components and 1.21239 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.042 mas, bpa=-8.076 degrees ! Estimated noise=3113.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016967 Jy ! Component: 100 - total flux cleaned = 0.000435734 Jy ! Component: 150 - total flux cleaned = 0.000675709 Jy ! Component: 200 - total flux cleaned = 0.000899082 Jy ! Total flux subtracted in 200 components = 0.000899082 Jy ! Clean residual min=-0.006123 max=0.006532 Jy/beam ! Clean residual mean=0.000012 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 1.21329 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 133 components and 1.21329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094641Jy sigma=0.000608 ! Fit after self-cal, rms=0.094489Jy sigma=0.000607 wmodel J1048-1909_S_2017_05_27_pus_map.mod ! Writing 133 model components to file: J1048-1909_S_2017_05_27_pus_map.mod wobs J1048-1909_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1048-1909_S_2017_05_27_pus_uvs.fits wwins J1048-1909_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J1048-1909_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342243 Jy ! Component: 100 - total flux cleaned = -0.000344826 Jy ! Component: 150 - total flux cleaned = -0.00113636 Jy ! Component: 200 - total flux cleaned = -0.0019874 Jy ! Component: 250 - total flux cleaned = -0.00271058 Jy ! Component: 300 - total flux cleaned = -0.00340443 Jy ! Component: 350 - total flux cleaned = -0.00423451 Jy ! Component: 400 - total flux cleaned = -0.00479441 Jy ! Component: 450 - total flux cleaned = -0.00533478 Jy ! Component: 500 - total flux cleaned = -0.00593423 Jy ! Component: 550 - total flux cleaned = -0.00665615 Jy ! Component: 600 - total flux cleaned = -0.00721472 Jy ! Component: 650 - total flux cleaned = -0.00769065 Jy ! Component: 700 - total flux cleaned = -0.00789203 Jy ! Component: 750 - total flux cleaned = -0.00840941 Jy ! Component: 800 - total flux cleaned = -0.00847097 Jy ! Component: 850 - total flux cleaned = -0.00865729 Jy ! Component: 900 - total flux cleaned = -0.00883694 Jy ! Component: 950 - total flux cleaned = -0.00901217 Jy ! Component: 1000 - total flux cleaned = -0.00924036 Jy ! Component: 1050 - total flux cleaned = -0.00935291 Jy ! Component: 1100 - total flux cleaned = -0.00957102 Jy ! Component: 1150 - total flux cleaned = -0.00983772 Jy ! Component: 1200 - total flux cleaned = -0.00994169 Jy ! Component: 1250 - total flux cleaned = -0.00999292 Jy ! Component: 1300 - total flux cleaned = -0.0103433 Jy ! Component: 1350 - total flux cleaned = -0.0103915 Jy ! Component: 1400 - total flux cleaned = -0.0105351 Jy ! Component: 1450 - total flux cleaned = -0.0105821 Jy ! Component: 1500 - total flux cleaned = -0.0107212 Jy ! Component: 1550 - total flux cleaned = -0.0108577 Jy ! Component: 1600 - total flux cleaned = -0.0109024 Jy ! Component: 1650 - total flux cleaned = -0.0110785 Jy ! Component: 1700 - total flux cleaned = -0.0111225 Jy ! Component: 1750 - total flux cleaned = -0.0110801 Jy ! Component: 1800 - total flux cleaned = -0.0111229 Jy ! Component: 1850 - total flux cleaned = -0.0111231 Jy ! Component: 1900 - total flux cleaned = -0.011123 Jy ! Component: 1950 - total flux cleaned = -0.011042 Jy ! Component: 2000 - total flux cleaned = -0.0108012 Jy ! Component: 2050 - total flux cleaned = -0.0106825 Jy ! Component: 2100 - total flux cleaned = -0.0104861 Jy ! Component: 2150 - total flux cleaned = -0.0104471 Jy ! Component: 2200 - total flux cleaned = -0.0102545 Jy ! Component: 2250 - total flux cleaned = -0.0100635 Jy ! Component: 2300 - total flux cleaned = -0.00994943 Jy ! Component: 2350 - total flux cleaned = -0.0097613 Jy ! Component: 2400 - total flux cleaned = -0.00968691 Jy ! Component: 2450 - total flux cleaned = -0.00950166 Jy ! Component: 2500 - total flux cleaned = -0.00942833 Jy ! Component: 2550 - total flux cleaned = -0.00931912 Jy ! Component: 2600 - total flux cleaned = -0.00924636 Jy ! Component: 2650 - total flux cleaned = -0.00913814 Jy ! Component: 2700 - total flux cleaned = -0.00910231 Jy ! Component: 2750 - total flux cleaned = -0.00903094 Jy ! Component: 2800 - total flux cleaned = -0.00889003 Jy ! Component: 2850 - total flux cleaned = -0.00882021 Jy ! Component: 2900 - total flux cleaned = -0.0088549 Jy ! Component: 2950 - total flux cleaned = -0.00885457 Jy ! Component: 3000 - total flux cleaned = -0.00878544 Jy ! Component: 3050 - total flux cleaned = -0.00881959 Jy ! Component: 3100 - total flux cleaned = -0.0086834 Jy ! Component: 3150 - total flux cleaned = -0.0086834 Jy ! Component: 3200 - total flux cleaned = -0.00854849 Jy ! Component: 3250 - total flux cleaned = -0.00834674 Jy ! Component: 3300 - total flux cleaned = -0.00817941 Jy ! Component: 3350 - total flux cleaned = -0.00821288 Jy ! Component: 3400 - total flux cleaned = -0.00804657 Jy ! Component: 3450 - total flux cleaned = -0.00794719 Jy ! Component: 3500 - total flux cleaned = -0.00791407 Jy ! Component: 3550 - total flux cleaned = -0.00781512 Jy ! Component: 3600 - total flux cleaned = -0.00778216 Jy ! Component: 3650 - total flux cleaned = -0.00768309 Jy ! Component: 3700 - total flux cleaned = -0.00765016 Jy ! Component: 3750 - total flux cleaned = -0.00758424 Jy ! Component: 3800 - total flux cleaned = -0.00751841 Jy ! Component: 3850 - total flux cleaned = -0.00745237 Jy ! Component: 3900 - total flux cleaned = -0.00735361 Jy ! Component: 3950 - total flux cleaned = -0.0072875 Jy ! Component: 4000 - total flux cleaned = -0.00725454 Jy ! Component: 4050 - total flux cleaned = -0.00722147 Jy ! Total flux subtracted in 4096 components = -0.00718852 Jy ! Clean residual min=-0.002476 max=0.001862 Jy/beam ! Clean residual mean=0.000008 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 1.2061 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 381 components and 1.2061 Jy ![Exited script file: muppet] wmap "J1048-1909_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 8.042 at -8.076 degrees (North through East) ! Clean map min=-0.0056666 max=1.083 Jy/beam ! Writing clean map to FITS file: J1048-1909_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.08302 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000529983 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.146807 0.146807 0.293613 0.587226 1.17445 2.3489 4.69781 9.39562 18.7912 37.5825 75.1649 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.166 x 8.042 at -8.076 degrees (North through East) ! Clean map min=-0.0056666 max=1.083 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1048-1909_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:04:46 2019