! Started logfile: J1047-1308_S_2017_04_28_pus_uvs.log on Thu May 2 16:23:14 2019 obs J1047-1308_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1047-1308_S_2017_04_28_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965476 visibilities/baseline/integration-bin. ! Found source: J1047-1308 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 9732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1047-1308_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 263 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.851891Jy sigma=0.012451 ! Fit after self-cal, rms=0.841201Jy sigma=0.012419 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=7.278 mas, bpa=-1.805 degrees ! Estimated noise=1451.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108117 Jy ! Component: 100 - total flux cleaned = 0.1427 Jy ! Total flux subtracted in 100 components = 0.1427 Jy ! Clean residual min=-0.021267 max=0.022790 Jy/beam ! Clean residual mean=0.000020 rms=0.006936 Jy/beam ! Combined flux in latest and established models = 0.1427 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.1427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134505Jy sigma=0.001609 ! Fit after self-cal, rms=0.134388Jy sigma=0.001609 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=8.757 mas, bpa=-0.4268 degrees ! Estimated noise=981.523 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188523 Jy ! Component: 100 - total flux cleaned = 0.0243104 Jy ! Component: 150 - total flux cleaned = 0.0238776 Jy ! Component: 200 - total flux cleaned = 0.02369 Jy ! Total flux subtracted in 200 components = 0.02369 Jy ! Clean residual min=-0.025020 max=0.027161 Jy/beam ! Clean residual mean=0.000053 rms=0.008039 Jy/beam ! Combined flux in latest and established models = 0.16639 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.16639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127463Jy sigma=0.001801 ! Fit after self-cal, rms=0.127415Jy sigma=0.001801 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.87 HN 0.95 KP 0.87 ! LA 0.82 MK 0.94 NL 0.91 OV 0.89 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.77 HN 0.95 KP 0.87 ! LA 0.82 MK 0.90 NL 1.05 OV 0.92 ! PT 0.93 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.80 HN 0.95 KP 0.85 ! LA 0.85 MK 0.93 NL 1.05 OV 0.82 ! PT 0.89 SC 1.19 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.86 HN 1.00 KP 1.00* ! LA 14.91 MK 0.92 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.127415Jy sigma=0.001801 ! Fit after self-cal, rms=0.104152Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=8.797 mas, bpa=-0.6667 degrees ! Estimated noise=966.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709711 Jy ! Component: 100 - total flux cleaned = 0.00070216 Jy ! Component: 150 - total flux cleaned = 0.0006006 Jy ! Component: 200 - total flux cleaned = 0.000512038 Jy ! Total flux subtracted in 200 components = 0.000512038 Jy ! Clean residual min=-0.005542 max=0.005798 Jy/beam ! Clean residual mean=-0.000003 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.166902 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.166902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103893Jy sigma=0.000671 ! Fit after self-cal, rms=0.103125Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103125Jy sigma=0.000663 ! Fit after self-cal, rms=0.108391Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=8.859 mas, bpa=-0.4102 degrees ! Estimated noise=966.788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108269 Jy ! Component: 100 - total flux cleaned = 0.00116101 Jy ! Component: 150 - total flux cleaned = 0.00116403 Jy ! Component: 200 - total flux cleaned = 0.00122982 Jy ! Total flux subtracted in 200 components = 0.00122982 Jy ! Clean residual min=-0.003019 max=0.004209 Jy/beam ! Clean residual mean=-0.000005 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.168132 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.168132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108212Jy sigma=0.000651 ! Fit after self-cal, rms=0.108256Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366318 Jy ! Component: 100 - total flux cleaned = 0.00439162 Jy ! Component: 150 - total flux cleaned = 0.00433088 Jy ! Component: 200 - total flux cleaned = 0.00432906 Jy ! Total flux subtracted in 200 components = 0.00432906 Jy ! Clean residual min=-0.002775 max=0.003126 Jy/beam ! Clean residual mean=-0.000002 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.172461 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.172461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108103Jy sigma=0.000649 ! Fit after self-cal, rms=0.108082Jy sigma=0.000649 ! Inverting map ! Added new window around map position (-25.5, 54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178362 Jy ! Component: 100 - total flux cleaned = 0.00215729 Jy ! Component: 150 - total flux cleaned = 0.00215967 Jy ! Component: 200 - total flux cleaned = 0.00210566 Jy ! Total flux subtracted in 200 components = 0.00210566 Jy ! Clean residual min=-0.002566 max=0.002808 Jy/beam ! Clean residual mean=-0.000002 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.174567 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.174567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107921Jy sigma=0.000648 ! Fit after self-cal, rms=0.107916Jy sigma=0.000648 ! Inverting map ! Added new window around map position (-30, -54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193647 Jy ! Component: 100 - total flux cleaned = 0.00214466 Jy ! Component: 150 - total flux cleaned = 0.0024464 Jy ! Component: 200 - total flux cleaned = 0.00276755 Jy ! Total flux subtracted in 200 components = 0.00276755 Jy ! Clean residual min=-0.002326 max=0.002502 Jy/beam ! Clean residual mean=-0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.177335 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 0.177335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107762Jy sigma=0.000647 ! Fit after self-cal, rms=0.107755Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107755Jy sigma=0.000647 ! Fit after self-cal, rms=0.109092Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=8.842 mas, bpa=-0.1491 degrees ! Estimated noise=964.918 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015557 Jy ! Component: 100 - total flux cleaned = 0.00184048 Jy ! Component: 150 - total flux cleaned = 0.00214433 Jy ! Component: 200 - total flux cleaned = 0.00233233 Jy ! Total flux subtracted in 200 components = 0.00233233 Jy ! Clean residual min=-0.002173 max=0.002276 Jy/beam ! Clean residual mean=-0.000001 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.179667 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.179667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108990Jy sigma=0.000646 ! Fit after self-cal, rms=0.108995Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029234 Jy ! Component: 100 - total flux cleaned = 0.000336983 Jy ! Component: 150 - total flux cleaned = 0.000337371 Jy ! Component: 200 - total flux cleaned = 0.000296732 Jy ! Total flux subtracted in 200 components = 0.000296732 Jy ! Clean residual min=-0.002138 max=0.002271 Jy/beam ! Clean residual mean=-0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.179964 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 101 components and 0.179964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108933Jy sigma=0.000646 ! Fit after self-cal, rms=0.108932Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108932Jy sigma=0.000646 ! Fit after self-cal, rms=0.109001Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.922 mas, bmaj=15.08 mas, bpa=4.052 degrees ! Estimated noise=1095.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018227 Jy ! Component: 100 - total flux cleaned = -0.000281154 Jy ! Component: 150 - total flux cleaned = -0.000399491 Jy ! Component: 200 - total flux cleaned = -0.000450006 Jy ! Total flux subtracted in 200 components = -0.000450006 Jy ! Clean residual min=-0.002067 max=0.002231 Jy/beam ! Clean residual mean=-0.000002 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.179514 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 0.179514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109002Jy sigma=0.000646 ! Fit after self-cal, rms=0.108996Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.42306e-05 Jy ! Component: 100 - total flux cleaned = -4.77351e-05 Jy ! Component: 150 - total flux cleaned = -6.80405e-05 Jy ! Component: 200 - total flux cleaned = -8.7416e-05 Jy ! Total flux subtracted in 200 components = -8.7416e-05 Jy ! Clean residual min=-0.002034 max=0.002216 Jy/beam ! Clean residual mean=-0.000001 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.179426 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.179426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108996Jy sigma=0.000646 ! Fit after self-cal, rms=0.108995Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=8.821 mas, bpa=-0.03303 degrees ! Estimated noise=964.725 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.614 x 8.821 at -0.03303 degrees (North through East) ! Clean map min=-0.002032 max=0.14726 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=7.412 mas, bpa=-1.581 degrees ! Estimated noise=1416.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106421 Jy ! Component: 100 - total flux cleaned = 0.143125 Jy ! Component: 150 - total flux cleaned = 0.160913 Jy ! Component: 200 - total flux cleaned = 0.170036 Jy ! Total flux subtracted in 200 components = 0.170036 Jy ! Clean residual min=-0.004904 max=0.005716 Jy/beam ! Clean residual mean=-0.000004 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.170037 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.170037 Jy ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=8.821 mas, bpa=-0.03303 degrees ! Estimated noise=964.725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00546167 Jy ! Component: 100 - total flux cleaned = 0.00938514 Jy ! Component: 150 - total flux cleaned = 0.0110498 Jy ! Component: 200 - total flux cleaned = 0.0114971 Jy ! Total flux subtracted in 200 components = 0.0114971 Jy ! Clean residual min=-0.002561 max=0.002783 Jy/beam ! Clean residual mean=-0.000005 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.181534 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.181534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.922 mas, bmaj=15.08 mas, bpa=4.052 degrees ! Estimated noise=1095.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107887 Jy ! Component: 100 - total flux cleaned = 0.000941543 Jy ! Component: 150 - total flux cleaned = 0.000766992 Jy ! Component: 200 - total flux cleaned = 0.000718823 Jy ! Total flux subtracted in 200 components = 0.000718823 Jy ! Clean residual min=-0.002421 max=0.002494 Jy/beam ! Clean residual mean=-0.000006 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.182252 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.18442e-07 Jy ! Component: 100 - total flux cleaned = -5.05026e-05 Jy ! Component: 150 - total flux cleaned = -0.000182433 Jy ! Component: 200 - total flux cleaned = -0.000182965 Jy ! Total flux subtracted in 200 components = -0.000182965 Jy ! Clean residual min=-0.002401 max=0.002492 Jy/beam ! Clean residual mean=-0.000005 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.182069 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 74 components and 0.182069 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=8.821 mas, bpa=-0.03303 degrees ! Estimated noise=964.725 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298043 Jy ! Component: 100 - total flux cleaned = 0.000554162 Jy ! Component: 150 - total flux cleaned = 0.000636241 Jy ! Component: 200 - total flux cleaned = 0.000637759 Jy ! Total flux subtracted in 200 components = 0.000637759 Jy ! Clean residual min=-0.002442 max=0.002328 Jy/beam ! Clean residual mean=-0.000002 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.182707 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.182707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109255Jy sigma=0.000647 ! Fit after self-cal, rms=0.109262Jy sigma=0.000647 wmodel J1047-1308_S_2017_04_28_pus_map.mod ! Writing 89 model components to file: J1047-1308_S_2017_04_28_pus_map.mod wobs J1047-1308_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1047-1308_S_2017_04_28_pus_uvs.fits wwins J1047-1308_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J1047-1308_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.61545e-05 Jy ! Component: 100 - total flux cleaned = 0.00026912 Jy ! Component: 150 - total flux cleaned = 0.000500291 Jy ! Component: 200 - total flux cleaned = 0.000721959 Jy ! Component: 250 - total flux cleaned = 0.000757281 Jy ! Component: 300 - total flux cleaned = 0.000688624 Jy ! Component: 350 - total flux cleaned = 0.000621709 Jy ! Component: 400 - total flux cleaned = 0.000688375 Jy ! Component: 450 - total flux cleaned = 0.00068871 Jy ! Component: 500 - total flux cleaned = 0.000719959 Jy ! Component: 550 - total flux cleaned = 0.000719865 Jy ! Component: 600 - total flux cleaned = 0.000719696 Jy ! Component: 650 - total flux cleaned = 0.000838608 Jy ! Component: 700 - total flux cleaned = 0.000838713 Jy ! Component: 750 - total flux cleaned = 0.00089525 Jy ! Component: 800 - total flux cleaned = 0.000895115 Jy ! Component: 850 - total flux cleaned = 0.000950947 Jy ! Component: 900 - total flux cleaned = 0.000923101 Jy ! Component: 950 - total flux cleaned = 0.000923455 Jy ! Component: 1000 - total flux cleaned = 0.000923268 Jy ! Component: 1050 - total flux cleaned = 0.000844274 Jy ! Component: 1100 - total flux cleaned = 0.000870419 Jy ! Component: 1150 - total flux cleaned = 0.000767789 Jy ! Component: 1200 - total flux cleaned = 0.000869395 Jy ! Component: 1250 - total flux cleaned = 0.000718622 Jy ! Component: 1300 - total flux cleaned = 0.0007185 Jy ! Component: 1350 - total flux cleaned = 0.000644347 Jy ! Component: 1400 - total flux cleaned = 0.000547386 Jy ! Component: 1450 - total flux cleaned = 0.00047561 Jy ! Component: 1500 - total flux cleaned = 0.000404703 Jy ! Component: 1550 - total flux cleaned = 0.000287024 Jy ! Component: 1600 - total flux cleaned = 0.000147715 Jy ! Component: 1650 - total flux cleaned = 3.27973e-05 Jy ! Component: 1700 - total flux cleaned = -1.28517e-05 Jy ! Component: 1750 - total flux cleaned = -0.000148251 Jy ! Component: 1800 - total flux cleaned = -0.000282155 Jy ! Component: 1850 - total flux cleaned = -0.000370638 Jy ! Component: 1900 - total flux cleaned = -0.000502622 Jy ! Component: 1950 - total flux cleaned = -0.000589707 Jy ! Component: 2000 - total flux cleaned = -0.000632555 Jy ! Component: 2050 - total flux cleaned = -0.000654274 Jy ! Component: 2100 - total flux cleaned = -0.000739504 Jy ! Component: 2150 - total flux cleaned = -0.000823643 Jy ! Component: 2200 - total flux cleaned = -0.000885827 Jy ! Component: 2250 - total flux cleaned = -0.00092705 Jy ! Component: 2300 - total flux cleaned = -0.0010089 Jy ! Component: 2350 - total flux cleaned = -0.00104943 Jy ! Component: 2400 - total flux cleaned = -0.0011097 Jy ! Component: 2450 - total flux cleaned = -0.00112967 Jy ! Component: 2500 - total flux cleaned = -0.00112962 Jy ! Component: 2550 - total flux cleaned = -0.00114937 Jy ! Component: 2600 - total flux cleaned = -0.00122752 Jy ! Component: 2650 - total flux cleaned = -0.00120833 Jy ! Component: 2700 - total flux cleaned = -0.00124695 Jy ! Component: 2750 - total flux cleaned = -0.00128535 Jy ! Component: 2800 - total flux cleaned = -0.00132339 Jy ! Component: 2850 - total flux cleaned = -0.00130455 Jy ! Component: 2900 - total flux cleaned = -0.00132335 Jy ! Component: 2950 - total flux cleaned = -0.00128623 Jy ! Component: 3000 - total flux cleaned = -0.00128619 Jy ! Component: 3050 - total flux cleaned = -0.00128648 Jy ! Component: 3100 - total flux cleaned = -0.00130467 Jy ! Component: 3150 - total flux cleaned = -0.00130501 Jy ! Component: 3200 - total flux cleaned = -0.00132305 Jy ! Component: 3250 - total flux cleaned = -0.0013589 Jy ! Component: 3300 - total flux cleaned = -0.00132341 Jy ! Component: 3350 - total flux cleaned = -0.00125312 Jy ! Component: 3400 - total flux cleaned = -0.00128811 Jy ! Component: 3450 - total flux cleaned = -0.00132298 Jy ! Component: 3500 - total flux cleaned = -0.00128829 Jy ! Component: 3550 - total flux cleaned = -0.0012711 Jy ! Component: 3600 - total flux cleaned = -0.00130512 Jy ! Component: 3650 - total flux cleaned = -0.0012709 Jy ! Component: 3700 - total flux cleaned = -0.00127085 Jy ! Component: 3750 - total flux cleaned = -0.00132106 Jy ! Component: 3800 - total flux cleaned = -0.00122082 Jy ! Component: 3850 - total flux cleaned = -0.00127026 Jy ! Component: 3900 - total flux cleaned = -0.00122064 Jy ! Component: 3950 - total flux cleaned = -0.00117142 Jy ! Component: 4000 - total flux cleaned = -0.00113873 Jy ! Component: 4050 - total flux cleaned = -0.00113873 Jy ! Total flux subtracted in 4096 components = -0.00112274 Jy ! Clean residual min=-0.000906 max=0.000865 Jy/beam ! Clean residual mean=0.000001 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.181584 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 337 components and 0.181584 Jy ![Exited script file: muppet] wmap "J1047-1308_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.614 x 8.821 at -0.03303 degrees (North through East) ! Clean map min=-0.0019822 max=0.14562 Jy/beam ! Writing clean map to FITS file: J1047-1308_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.145623 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282692 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.582379 0.582379 1.16476 2.32952 4.65903 9.31806 18.6361 37.2722 74.5445 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.145 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.614 x 8.821 at -0.03303 degrees (North through East) ! Clean map min=-0.0019822 max=0.14562 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1047-1308_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:23:19 2019