! Started logfile: J1045-2927_S_2017_08_12_pus_uvs.log on Fri May 10 14:57:59 2019 obs J1045-2927_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1045-2927_S_2017_08_12_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.605614 visibilities/baseline/integration-bin. ! Found source: J1045-2927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 10356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1045-2927_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 201 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 638 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.778372Jy sigma=0.005481 ! Fit after self-cal, rms=0.752201Jy sigma=0.005279 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.343 mas, bmaj=6.6 mas, bpa=-4.393 degrees ! Estimated noise=1674.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176662 Jy ! Component: 100 - total flux cleaned = 0.231291 Jy ! Total flux subtracted in 100 components = 0.231291 Jy ! Clean residual min=-0.025726 max=0.051002 Jy/beam ! Clean residual mean=-0.000156 rms=0.007604 Jy/beam ! Combined flux in latest and established models = 0.231291 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.231291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154438Jy sigma=0.001102 ! Fit after self-cal, rms=0.154471Jy sigma=0.001102 ! Inverting map ! Added new window around map position (-11.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0477908 Jy ! Component: 100 - total flux cleaned = 0.0808529 Jy ! Total flux subtracted in 100 components = 0.0808529 Jy ! Clean residual min=-0.020569 max=0.029056 Jy/beam ! Clean residual mean=-0.000113 rms=0.005362 Jy/beam ! Combined flux in latest and established models = 0.312143 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.312143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128594Jy sigma=0.000903 ! Fit after self-cal, rms=0.127269Jy sigma=0.000894 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.651 mas, bpa=-5.168 degrees ! Estimated noise=1147.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519855 Jy ! Component: 100 - total flux cleaned = 0.0837782 Jy ! Component: 150 - total flux cleaned = 0.1053 Jy ! Component: 200 - total flux cleaned = 0.120148 Jy ! Total flux subtracted in 200 components = 0.120148 Jy ! Clean residual min=-0.010673 max=0.015496 Jy/beam ! Clean residual mean=-0.000191 rms=0.003149 Jy/beam ! Combined flux in latest and established models = 0.432292 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 90 components and 0.432292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102444Jy sigma=0.000699 ! Fit after self-cal, rms=0.101314Jy sigma=0.000690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.04 ! LA 0.94 MK 1.00 NL 0.98 OV 1.03 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.98 ! LA 0.91 MK 1.00 NL 1.13 OV 1.06 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.94 ! LA 0.92 MK 1.05 NL 1.09 OV 0.96 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 1.00* ! LA 0.99 MK 0.98 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.101314Jy sigma=0.000690 ! Fit after self-cal, rms=0.098530Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=7.726 mas, bpa=-4.475 degrees ! Estimated noise=1134.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00700828 Jy ! Component: 100 - total flux cleaned = 0.00737136 Jy ! Component: 150 - total flux cleaned = 0.00723238 Jy ! Component: 200 - total flux cleaned = 0.00710504 Jy ! Total flux subtracted in 200 components = 0.00710504 Jy ! Clean residual min=-0.007128 max=0.007287 Jy/beam ! Clean residual mean=-0.000017 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.439397 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 111 components and 0.439397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097795Jy sigma=0.000667 ! Fit after self-cal, rms=0.097763Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097763Jy sigma=0.000666 ! Fit after self-cal, rms=0.096389Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.95 mas, bmaj=7.712 mas, bpa=-4.516 degrees ! Estimated noise=1130.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361558 Jy ! Component: 100 - total flux cleaned = 0.00374521 Jy ! Component: 150 - total flux cleaned = 0.00363527 Jy ! Component: 200 - total flux cleaned = 0.00343374 Jy ! Total flux subtracted in 200 components = 0.00343374 Jy ! Clean residual min=-0.005893 max=0.006926 Jy/beam ! Clean residual mean=-0.000015 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.442831 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 0.442831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096052Jy sigma=0.000659 ! Fit after self-cal, rms=0.096024Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00687883 Jy ! Component: 100 - total flux cleaned = 0.00991185 Jy ! Component: 150 - total flux cleaned = 0.0110748 Jy ! Component: 200 - total flux cleaned = 0.0119612 Jy ! Total flux subtracted in 200 components = 0.0119612 Jy ! Clean residual min=-0.005160 max=0.004398 Jy/beam ! Clean residual mean=0.000012 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.454792 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.454792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095454Jy sigma=0.000655 ! Fit after self-cal, rms=0.095419Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095419Jy sigma=0.000655 ! Fit after self-cal, rms=0.094443Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.688 mas, bpa=-4.593 degrees ! Estimated noise=1122.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266051 Jy ! Component: 100 - total flux cleaned = 0.00322908 Jy ! Component: 150 - total flux cleaned = 0.00348701 Jy ! Component: 200 - total flux cleaned = 0.00363825 Jy ! Total flux subtracted in 200 components = 0.00363825 Jy ! Clean residual min=-0.004369 max=0.003401 Jy/beam ! Clean residual mean=0.000010 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.45843 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 152 components and 0.45843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094273Jy sigma=0.000651 ! Fit after self-cal, rms=0.094274Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772381 Jy ! Component: 100 - total flux cleaned = 0.000834875 Jy ! Component: 150 - total flux cleaned = 0.000956227 Jy ! Component: 200 - total flux cleaned = 0.000953651 Jy ! Total flux subtracted in 200 components = 0.000953651 Jy ! Clean residual min=-0.004241 max=0.003292 Jy/beam ! Clean residual mean=0.000012 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.459384 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 160 components and 0.459384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094190Jy sigma=0.000651 ! Fit after self-cal, rms=0.094187Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094187Jy sigma=0.000651 ! Fit after self-cal, rms=0.093927Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.905 mas, bmaj=23.89 mas, bpa=-3.144 degrees ! Estimated noise=1451.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000897238 Jy ! Component: 100 - total flux cleaned = 0.00132153 Jy ! Component: 150 - total flux cleaned = 0.00153982 Jy ! Component: 200 - total flux cleaned = 0.00158911 Jy ! Total flux subtracted in 200 components = 0.00158911 Jy ! Clean residual min=-0.004213 max=0.003640 Jy/beam ! Clean residual mean=0.000011 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.460973 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 171 components and 0.460973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093901Jy sigma=0.000650 ! Fit after self-cal, rms=0.093888Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176855 Jy ! Component: 100 - total flux cleaned = 0.000350838 Jy ! Component: 150 - total flux cleaned = 0.000473666 Jy ! Component: 200 - total flux cleaned = 0.000541148 Jy ! Total flux subtracted in 200 components = 0.000541148 Jy ! Clean residual min=-0.004094 max=0.003679 Jy/beam ! Clean residual mean=0.000014 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.461514 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 179 components and 0.461514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093882Jy sigma=0.000650 ! Fit after self-cal, rms=0.093876Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.684 mas, bpa=-4.596 degrees ! Estimated noise=1120.56 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.684 at -4.596 degrees (North through East) ! Clean map min=-0.0039601 max=0.22969 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.355 mas, bmaj=6.59 mas, bpa=-4.286 degrees ! Estimated noise=1664.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174249 Jy ! Component: 100 - total flux cleaned = 0.238349 Jy ! Component: 150 - total flux cleaned = 0.283279 Jy ! Component: 200 - total flux cleaned = 0.316901 Jy ! Total flux subtracted in 200 components = 0.316901 Jy ! Clean residual min=-0.014243 max=0.019894 Jy/beam ! Clean residual mean=-0.000094 rms=0.004116 Jy/beam ! Combined flux in latest and established models = 0.316901 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.316901 Jy ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.684 mas, bpa=-4.596 degrees ! Estimated noise=1120.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421939 Jy ! Component: 100 - total flux cleaned = 0.0692507 Jy ! Component: 150 - total flux cleaned = 0.0877853 Jy ! Component: 200 - total flux cleaned = 0.100698 Jy ! Total flux subtracted in 200 components = 0.100698 Jy ! Clean residual min=-0.006706 max=0.008425 Jy/beam ! Clean residual mean=-0.000106 rms=0.002178 Jy/beam ! Combined flux in latest and established models = 0.417599 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 88 components and 0.417599 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.905 mas, bmaj=23.89 mas, bpa=-3.144 degrees ! Estimated noise=1451.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147171 Jy ! Component: 100 - total flux cleaned = 0.024018 Jy ! Component: 150 - total flux cleaned = 0.0305035 Jy ! Component: 200 - total flux cleaned = 0.0350473 Jy ! Total flux subtracted in 200 components = 0.0350473 Jy ! Clean residual min=-0.005023 max=0.005011 Jy/beam ! Clean residual mean=-0.000034 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.452647 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318536 Jy ! Component: 100 - total flux cleaned = 0.00478541 Jy ! Component: 150 - total flux cleaned = 0.00547596 Jy ! Component: 200 - total flux cleaned = 0.00602028 Jy ! Total flux subtracted in 200 components = 0.00602028 Jy ! Clean residual min=-0.004477 max=0.003776 Jy/beam ! Clean residual mean=-0.000003 rms=0.001278 Jy/beam ! Combined flux in latest and established models = 0.458667 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.458667 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.684 mas, bpa=-4.596 degrees ! Estimated noise=1120.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.5385e-05 Jy ! Component: 100 - total flux cleaned = 1.82677e-05 Jy ! Component: 150 - total flux cleaned = 0.000188192 Jy ! Component: 200 - total flux cleaned = 0.000336651 Jy ! Total flux subtracted in 200 components = 0.000336651 Jy ! Clean residual min=-0.004831 max=0.004989 Jy/beam ! Clean residual mean=0.000000 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.459004 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 122 components and 0.459004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094457Jy sigma=0.000654 ! Fit after self-cal, rms=0.094241Jy sigma=0.000653 wmodel J1045-2927_S_2017_08_12_pus_map.mod ! Writing 122 model components to file: J1045-2927_S_2017_08_12_pus_map.mod wobs J1045-2927_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1045-2927_S_2017_08_12_pus_uvs.fits wwins J1045-2927_S_2017_08_12_pus_map.win ! wwins: Wrote 4 windows to J1045-2927_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113382 Jy ! Component: 100 - total flux cleaned = -0.000801772 Jy ! Component: 150 - total flux cleaned = -0.000247267 Jy ! Component: 200 - total flux cleaned = 0.000210699 Jy ! Component: 250 - total flux cleaned = 0.000587848 Jy ! Component: 300 - total flux cleaned = 0.000897175 Jy ! Component: 350 - total flux cleaned = 0.00104613 Jy ! Component: 400 - total flux cleaned = 0.00128403 Jy ! Component: 450 - total flux cleaned = 0.00151107 Jy ! Component: 500 - total flux cleaned = 0.00164225 Jy ! Component: 550 - total flux cleaned = 0.00172702 Jy ! Component: 600 - total flux cleaned = 0.0017276 Jy ! Component: 650 - total flux cleaned = 0.00161024 Jy ! Component: 700 - total flux cleaned = 0.00149741 Jy ! Component: 750 - total flux cleaned = 0.001425 Jy ! Component: 800 - total flux cleaned = 0.00138973 Jy ! Component: 850 - total flux cleaned = 0.0012852 Jy ! Component: 900 - total flux cleaned = 0.00114919 Jy ! Component: 950 - total flux cleaned = 0.000952117 Jy ! Component: 1000 - total flux cleaned = 0.000824109 Jy ! Component: 1050 - total flux cleaned = 0.000760896 Jy ! Component: 1100 - total flux cleaned = 0.00066829 Jy ! Component: 1150 - total flux cleaned = 0.000548622 Jy ! Component: 1200 - total flux cleaned = 0.000373464 Jy ! Component: 1250 - total flux cleaned = 0.000287908 Jy ! Component: 1300 - total flux cleaned = 0.00012003 Jy ! Component: 1350 - total flux cleaned = 6.5062e-05 Jy ! Component: 1400 - total flux cleaned = 1.06248e-05 Jy ! Component: 1450 - total flux cleaned = -4.27542e-05 Jy ! Component: 1500 - total flux cleaned = -9.49571e-05 Jy ! Component: 1550 - total flux cleaned = -0.000170769 Jy ! Component: 1600 - total flux cleaned = -0.000146107 Jy ! Component: 1650 - total flux cleaned = -0.000146277 Jy ! Component: 1700 - total flux cleaned = -0.000146344 Jy ! Component: 1750 - total flux cleaned = -0.000146189 Jy ! Component: 1800 - total flux cleaned = -0.000192376 Jy ! Component: 1850 - total flux cleaned = -0.000169466 Jy ! Component: 1900 - total flux cleaned = -0.000169916 Jy ! Component: 1950 - total flux cleaned = -0.000148202 Jy ! Component: 2000 - total flux cleaned = -0.000148482 Jy ! Component: 2050 - total flux cleaned = -0.000148292 Jy ! Component: 2100 - total flux cleaned = -0.000210983 Jy ! Component: 2150 - total flux cleaned = -0.00016934 Jy ! Component: 2200 - total flux cleaned = -0.000169341 Jy ! Component: 2250 - total flux cleaned = -0.000189319 Jy ! Component: 2300 - total flux cleaned = -0.000209286 Jy ! Component: 2350 - total flux cleaned = -0.000228697 Jy ! Component: 2400 - total flux cleaned = -0.000228224 Jy ! Component: 2450 - total flux cleaned = -0.000208914 Jy ! Component: 2500 - total flux cleaned = -0.000190215 Jy ! Component: 2550 - total flux cleaned = -0.000227233 Jy ! Component: 2600 - total flux cleaned = -0.000227132 Jy ! Component: 2650 - total flux cleaned = -0.000209242 Jy ! Component: 2700 - total flux cleaned = -0.000226835 Jy ! Component: 2750 - total flux cleaned = -0.000191485 Jy ! Component: 2800 - total flux cleaned = -0.000226059 Jy ! Component: 2850 - total flux cleaned = -0.000225894 Jy ! Component: 2900 - total flux cleaned = -0.000242799 Jy ! Component: 2950 - total flux cleaned = -0.000293092 Jy ! Component: 3000 - total flux cleaned = -0.000276783 Jy ! Component: 3050 - total flux cleaned = -0.000358864 Jy ! Component: 3100 - total flux cleaned = -0.000391477 Jy ! Component: 3150 - total flux cleaned = -0.000375622 Jy ! Component: 3200 - total flux cleaned = -0.00043956 Jy ! Component: 3250 - total flux cleaned = -0.000502459 Jy ! Component: 3300 - total flux cleaned = -0.000502498 Jy ! Component: 3350 - total flux cleaned = -0.000564474 Jy ! Component: 3400 - total flux cleaned = -0.000610484 Jy ! Component: 3450 - total flux cleaned = -0.000640912 Jy ! Component: 3500 - total flux cleaned = -0.000686145 Jy ! Component: 3550 - total flux cleaned = -0.000730816 Jy ! Component: 3600 - total flux cleaned = -0.000819621 Jy ! Component: 3650 - total flux cleaned = -0.000863537 Jy ! Component: 3700 - total flux cleaned = -0.000892568 Jy ! Component: 3750 - total flux cleaned = -0.00096452 Jy ! Component: 3800 - total flux cleaned = -0.00100727 Jy ! Component: 3850 - total flux cleaned = -0.00109223 Jy ! Component: 3900 - total flux cleaned = -0.00116253 Jy ! Component: 3950 - total flux cleaned = -0.00126031 Jy ! Component: 4000 - total flux cleaned = -0.00137126 Jy ! Component: 4050 - total flux cleaned = -0.00148143 Jy ! Total flux subtracted in 4096 components = -0.00157724 Jy ! Clean residual min=-0.000780 max=0.000719 Jy/beam ! Clean residual mean=-0.000005 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.457427 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 406 components and 0.457427 Jy ![Exited script file: muppet] wmap "J1045-2927_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.684 at -4.596 degrees (North through East) ! Clean map min=-0.0019138 max=0.22557 Jy/beam ! Writing clean map to FITS file: J1045-2927_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.225566 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000239574 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.31863 0.31863 0.637259 1.27452 2.54904 5.09807 10.1961 20.3923 40.7846 81.5692 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.225 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.945 x 7.684 at -4.596 degrees (North through East) ! Clean map min=-0.0019138 max=0.22557 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1045-2927_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:58:04 2019