! Started logfile: J1044+8054_S_2017_06_10_pus_uvs.log on Mon May 6 14:51:56 2019 obs J1044+8054_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1044+8054_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.893333 visibilities/baseline/integration-bin. ! Found source: J1044+8054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1608 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1044+8054_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.346870Jy sigma=0.002844 ! Fit after self-cal, rms=0.330033Jy sigma=0.002700 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=10.25 mas, bpa=-26.78 degrees ! Estimated noise=3156.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.532193 Jy ! Component: 100 - total flux cleaned = 0.674945 Jy ! Total flux subtracted in 100 components = 0.674945 Jy ! Clean residual min=-0.028025 max=0.057056 Jy/beam ! Clean residual mean=0.000141 rms=0.010064 Jy/beam ! Combined flux in latest and established models = 0.674945 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.674945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152405Jy sigma=0.001230 ! Fit after self-cal, rms=0.152326Jy sigma=0.001229 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.026 mas, bmaj=10.87 mas, bpa=-26.56 degrees ! Estimated noise=2472.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0751547 Jy ! Component: 100 - total flux cleaned = 0.108456 Jy ! Component: 150 - total flux cleaned = 0.119729 Jy ! Component: 200 - total flux cleaned = 0.124604 Jy ! Total flux subtracted in 200 components = 0.124604 Jy ! Clean residual min=-0.016786 max=0.029992 Jy/beam ! Clean residual mean=-0.000046 rms=0.005756 Jy/beam ! Combined flux in latest and established models = 0.799549 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 0.799549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111975Jy sigma=0.000922 ! Fit after self-cal, rms=0.111360Jy sigma=0.000917 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 0.98 KP 1.01 ! LA 1.00 MK 1.03 NL 0.88 OV 1.21 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.02 KP 0.95 ! LA 0.94 MK 1.03 NL 1.01 OV 1.00* ! PT 0.96 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.04 HN 1.02 KP 0.94 ! LA 0.96 MK 1.03 NL 0.97 OV 1.21 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00 KP 1.00* ! LA 1.04 MK 0.91 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.111360Jy sigma=0.000917 ! Fit after self-cal, rms=0.087957Jy sigma=0.000712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.042 mas, bmaj=10.87 mas, bpa=-26.6 degrees ! Estimated noise=2451.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123585 Jy ! Component: 100 - total flux cleaned = 0.0183563 Jy ! Component: 150 - total flux cleaned = 0.0190054 Jy ! Component: 200 - total flux cleaned = 0.0190075 Jy ! Total flux subtracted in 200 components = 0.0190075 Jy ! Clean residual min=-0.007650 max=0.008230 Jy/beam ! Clean residual mean=-0.000001 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 0.818557 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 68 components and 0.818557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086291Jy sigma=0.000697 ! Fit after self-cal, rms=0.086102Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086102Jy sigma=0.000696 ! Fit after self-cal, rms=0.085932Jy sigma=0.000694 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=10.87 mas, bpa=-26.64 degrees ! Estimated noise=2450.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549945 Jy ! Component: 100 - total flux cleaned = 0.00658673 Jy ! Component: 150 - total flux cleaned = 0.00677246 Jy ! Component: 200 - total flux cleaned = 0.00694249 Jy ! Total flux subtracted in 200 components = 0.00694249 Jy ! Clean residual min=-0.006361 max=0.006586 Jy/beam ! Clean residual mean=0.000003 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.825499 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 87 components and 0.825499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085528Jy sigma=0.000691 ! Fit after self-cal, rms=0.085475Jy sigma=0.000690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (76, 69). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000944341 Jy ! Component: 100 - total flux cleaned = 0.000637301 Jy ! Component: 150 - total flux cleaned = 0.00087338 Jy ! Component: 200 - total flux cleaned = 0.00139048 Jy ! Total flux subtracted in 200 components = 0.00139048 Jy ! Clean residual min=-0.005321 max=0.005307 Jy/beam ! Clean residual mean=0.000004 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.82689 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 117 components and 0.82689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084858Jy sigma=0.000685 ! Fit after self-cal, rms=0.084849Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084849Jy sigma=0.000685 ! Fit after self-cal, rms=0.084852Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=10.87 mas, bpa=-26.67 degrees ! Estimated noise=2451.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174203 Jy ! Component: 100 - total flux cleaned = 0.00273438 Jy ! Component: 150 - total flux cleaned = 0.00333856 Jy ! Component: 200 - total flux cleaned = 0.0036512 Jy ! Total flux subtracted in 200 components = 0.0036512 Jy ! Clean residual min=-0.004456 max=0.004753 Jy/beam ! Clean residual mean=0.000003 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.830541 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 130 components and 0.830541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084650Jy sigma=0.000683 ! Fit after self-cal, rms=0.084645Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00073489 Jy ! Component: 100 - total flux cleaned = 0.00109293 Jy ! Component: 150 - total flux cleaned = 0.0012264 Jy ! Component: 200 - total flux cleaned = 0.0012904 Jy ! Total flux subtracted in 200 components = 0.0012904 Jy ! Clean residual min=-0.004305 max=0.004519 Jy/beam ! Clean residual mean=0.000003 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.831831 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 141 components and 0.831831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084541Jy sigma=0.000682 ! Fit after self-cal, rms=0.084539Jy sigma=0.000682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084539Jy sigma=0.000682 ! Fit after self-cal, rms=0.084550Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.184 mas, bmaj=15.38 mas, bpa=-32.52 degrees ! Estimated noise=3101.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150727 Jy ! Component: 100 - total flux cleaned = 0.00193334 Jy ! Component: 150 - total flux cleaned = 0.00228697 Jy ! Component: 200 - total flux cleaned = 0.00234381 Jy ! Total flux subtracted in 200 components = 0.00234381 Jy ! Clean residual min=-0.004220 max=0.005269 Jy/beam ! Clean residual mean=0.000009 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.834175 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 166 components and 0.834175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084517Jy sigma=0.000682 ! Fit after self-cal, rms=0.084510Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.31459e-06 Jy ! Component: 100 - total flux cleaned = 5.43074e-05 Jy ! Component: 150 - total flux cleaned = 7.59369e-06 Jy ! Component: 200 - total flux cleaned = 7.00244e-06 Jy ! Total flux subtracted in 200 components = 7.00244e-06 Jy ! Clean residual min=-0.004069 max=0.004980 Jy/beam ! Clean residual mean=0.000009 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.834182 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 179 components and 0.834182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084490Jy sigma=0.000682 ! Fit after self-cal, rms=0.084485Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=10.87 mas, bpa=-26.69 degrees ! Estimated noise=2452.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.04 x 10.87 at -26.69 degrees (North through East) ! Clean map min=-0.0059287 max=0.69732 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084485Jy sigma=0.000682 ! Fit after self-cal, rms=0.078615Jy sigma=0.000628 ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=10.87 mas, bpa=-26.72 degrees ! Estimated noise=2453.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112335 Jy ! Component: 100 - total flux cleaned = 0.00213908 Jy ! Component: 150 - total flux cleaned = 0.00243071 Jy ! Component: 200 - total flux cleaned = 0.00253783 Jy ! Total flux subtracted in 200 components = 0.00253783 Jy ! Clean residual min=-0.004090 max=0.004311 Jy/beam ! Clean residual mean=0.000004 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.83672 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 203 components and 0.83672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078514Jy sigma=0.000627 ! Fit after self-cal, rms=0.078512Jy sigma=0.000627 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115102 Jy ! Component: 100 - total flux cleaned = 0.000164444 Jy ! Component: 150 - total flux cleaned = 0.000307739 Jy ! Component: 200 - total flux cleaned = 0.000307935 Jy ! Total flux subtracted in 200 components = 0.000307935 Jy ! Clean residual min=-0.004088 max=0.004291 Jy/beam ! Clean residual mean=0.000003 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.837028 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 215 components and 0.837028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078456Jy sigma=0.000626 ! Fit after self-cal, rms=0.078455Jy sigma=0.000626 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078455Jy sigma=0.000626 ! Fit after self-cal, rms=0.078425Jy sigma=0.000626 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=10.26 mas, bpa=-26.82 degrees ! Estimated noise=3152.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.531356 Jy ! Component: 100 - total flux cleaned = 0.673706 Jy ! Component: 150 - total flux cleaned = 0.733351 Jy ! Component: 200 - total flux cleaned = 0.767012 Jy ! Total flux subtracted in 200 components = 0.767012 Jy ! Clean residual min=-0.013265 max=0.017477 Jy/beam ! Clean residual mean=0.000100 rms=0.003684 Jy/beam ! Combined flux in latest and established models = 0.767012 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.767012 Jy ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=10.87 mas, bpa=-26.72 degrees ! Estimated noise=2453.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026834 Jy ! Component: 100 - total flux cleaned = 0.0424455 Jy ! Component: 150 - total flux cleaned = 0.0509138 Jy ! Component: 200 - total flux cleaned = 0.0569303 Jy ! Total flux subtracted in 200 components = 0.0569303 Jy ! Clean residual min=-0.007097 max=0.006357 Jy/beam ! Clean residual mean=0.000016 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 0.823942 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 64 components and 0.823942 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.176 mas, bmaj=15.37 mas, bpa=-32.55 degrees ! Estimated noise=3105.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667231 Jy ! Component: 100 - total flux cleaned = 0.00752828 Jy ! Component: 150 - total flux cleaned = 0.00880628 Jy ! Component: 200 - total flux cleaned = 0.00946327 Jy ! Total flux subtracted in 200 components = 0.00946327 Jy ! Clean residual min=-0.005428 max=0.006209 Jy/beam ! Clean residual mean=0.000006 rms=0.001660 Jy/beam ! Combined flux in latest and established models = 0.833405 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000568536 Jy ! Component: 100 - total flux cleaned = 0.00117339 Jy ! Component: 150 - total flux cleaned = 0.00171488 Jy ! Component: 200 - total flux cleaned = 0.00204135 Jy ! Total flux subtracted in 200 components = 0.00204135 Jy ! Clean residual min=-0.004839 max=0.005457 Jy/beam ! Clean residual mean=0.000005 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 0.835447 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 135 components and 0.835447 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=10.87 mas, bpa=-26.72 degrees ! Estimated noise=2453.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138686 Jy ! Component: 100 - total flux cleaned = 0.00122792 Jy ! Component: 150 - total flux cleaned = 0.00149918 Jy ! Component: 200 - total flux cleaned = 0.00162486 Jy ! Total flux subtracted in 200 components = 0.00162486 Jy ! Clean residual min=-0.004531 max=0.004870 Jy/beam ! Clean residual mean=0.000003 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.837072 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 162 components and 0.837072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078939Jy sigma=0.000630 ! Fit after self-cal, rms=0.078851Jy sigma=0.000630 wmodel J1044+8054_S_2017_06_10_pus_map.mod ! Writing 162 model components to file: J1044+8054_S_2017_06_10_pus_map.mod wobs J1044+8054_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1044+8054_S_2017_06_10_pus_uvs.fits wwins J1044+8054_S_2017_06_10_pus_map.win ! wwins: Wrote 3 windows to J1044+8054_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105126 Jy ! Component: 100 - total flux cleaned = 0.00105015 Jy ! Component: 150 - total flux cleaned = 0.000978688 Jy ! Component: 200 - total flux cleaned = 0.000706238 Jy ! Component: 250 - total flux cleaned = 0.000706192 Jy ! Component: 300 - total flux cleaned = 0.000582314 Jy ! Component: 350 - total flux cleaned = 0.000464903 Jy ! Component: 400 - total flux cleaned = 0.000522609 Jy ! Component: 450 - total flux cleaned = 0.00063208 Jy ! Component: 500 - total flux cleaned = 0.000737376 Jy ! Component: 550 - total flux cleaned = 0.000736731 Jy ! Component: 600 - total flux cleaned = 0.000938365 Jy ! Component: 650 - total flux cleaned = 0.000888727 Jy ! Component: 700 - total flux cleaned = 0.00108055 Jy ! Component: 750 - total flux cleaned = 0.000845902 Jy ! Component: 800 - total flux cleaned = 0.000801476 Jy ! Component: 850 - total flux cleaned = 0.000712597 Jy ! Component: 900 - total flux cleaned = 0.000625738 Jy ! Component: 950 - total flux cleaned = 0.000454658 Jy ! Component: 1000 - total flux cleaned = 0.00032934 Jy ! Component: 1050 - total flux cleaned = 0.000288299 Jy ! Component: 1100 - total flux cleaned = 0.000167205 Jy ! Component: 1150 - total flux cleaned = 4.8801e-05 Jy ! Component: 1200 - total flux cleaned = 1.03229e-05 Jy ! Component: 1250 - total flux cleaned = -0.000179918 Jy ! Component: 1300 - total flux cleaned = -0.000328415 Jy ! Component: 1350 - total flux cleaned = -0.000365144 Jy ! Component: 1400 - total flux cleaned = -0.000438114 Jy ! Component: 1450 - total flux cleaned = -0.000509123 Jy ! Component: 1500 - total flux cleaned = -0.000579312 Jy ! Component: 1550 - total flux cleaned = -0.000683213 Jy ! Component: 1600 - total flux cleaned = -0.000717102 Jy ! Component: 1650 - total flux cleaned = -0.00088555 Jy ! Component: 1700 - total flux cleaned = -0.00101791 Jy ! Component: 1750 - total flux cleaned = -0.00108322 Jy ! Component: 1800 - total flux cleaned = -0.00118052 Jy ! Component: 1850 - total flux cleaned = -0.00121248 Jy ! Component: 1900 - total flux cleaned = -0.00130767 Jy ! Component: 1950 - total flux cleaned = -0.00143246 Jy ! Component: 2000 - total flux cleaned = -0.00149387 Jy ! Component: 2050 - total flux cleaned = -0.00149354 Jy ! Component: 2100 - total flux cleaned = -0.0014632 Jy ! Component: 2150 - total flux cleaned = -0.00158317 Jy ! Component: 2200 - total flux cleaned = -0.00164256 Jy ! Component: 2250 - total flux cleaned = -0.0016719 Jy ! Component: 2300 - total flux cleaned = -0.00172975 Jy ! Component: 2350 - total flux cleaned = -0.00164312 Jy ! Component: 2400 - total flux cleaned = -0.00164337 Jy ! Component: 2450 - total flux cleaned = -0.00167155 Jy ! Component: 2500 - total flux cleaned = -0.00164341 Jy ! Component: 2550 - total flux cleaned = -0.00161527 Jy ! Component: 2600 - total flux cleaned = -0.00158736 Jy ! Component: 2650 - total flux cleaned = -0.00158753 Jy ! Component: 2700 - total flux cleaned = -0.0015603 Jy ! Component: 2750 - total flux cleaned = -0.00161433 Jy ! Component: 2800 - total flux cleaned = -0.00161432 Jy ! Component: 2850 - total flux cleaned = -0.0016142 Jy ! Component: 2900 - total flux cleaned = -0.00164069 Jy ! Component: 2950 - total flux cleaned = -0.00171904 Jy ! Component: 3000 - total flux cleaned = -0.00166696 Jy ! Component: 3050 - total flux cleaned = -0.00174424 Jy ! Component: 3100 - total flux cleaned = -0.00176984 Jy ! Component: 3150 - total flux cleaned = -0.00179539 Jy ! Component: 3200 - total flux cleaned = -0.00182067 Jy ! Component: 3250 - total flux cleaned = -0.00189622 Jy ! Component: 3300 - total flux cleaned = -0.00197075 Jy ! Component: 3350 - total flux cleaned = -0.0019707 Jy ! Component: 3400 - total flux cleaned = -0.00202004 Jy ! Component: 3450 - total flux cleaned = -0.00204449 Jy ! Component: 3500 - total flux cleaned = -0.00204445 Jy ! Component: 3550 - total flux cleaned = -0.00211725 Jy ! Component: 3600 - total flux cleaned = -0.0020932 Jy ! Component: 3650 - total flux cleaned = -0.00211718 Jy ! Component: 3700 - total flux cleaned = -0.00211721 Jy ! Component: 3750 - total flux cleaned = -0.00218838 Jy ! Component: 3800 - total flux cleaned = -0.00221188 Jy ! Component: 3850 - total flux cleaned = -0.00216504 Jy ! Component: 3900 - total flux cleaned = -0.0022349 Jy ! Component: 3950 - total flux cleaned = -0.00237405 Jy ! Component: 4000 - total flux cleaned = -0.00230474 Jy ! Component: 4050 - total flux cleaned = -0.0023277 Jy ! Total flux subtracted in 4096 components = -0.00235069 Jy ! Clean residual min=-0.001347 max=0.001435 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.834721 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 413 components and 0.834721 Jy ![Exited script file: muppet] wmap "J1044+8054_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 10.87 at -26.72 degrees (North through East) ! Clean map min=-0.0055062 max=0.69655 Jy/beam ! Writing clean map to FITS file: J1044+8054_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.696549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000386709 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.166553 0.166553 0.333107 0.666214 1.33243 2.66485 5.32971 10.6594 21.3188 42.6377 85.2754 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.696 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.039 x 10.87 at -26.72 degrees (North through East) ! Clean map min=-0.0055062 max=0.69655 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1044+8054_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:52:01 2019