! Started logfile: J1042-4143_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:46:10 2019 obs J1042-4143_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1042-4143_S_2017_05_31_pus_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.614612 visibilities/baseline/integration-bin. ! Found source: J1042-4143 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 8076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1042-4143_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 368 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883386Jy sigma=0.005196 ! Fit after self-cal, rms=0.859171Jy sigma=0.005075 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.295 mas, bmaj=6.822 mas, bpa=-11.25 degrees ! Estimated noise=2712.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111606 Jy ! Component: 100 - total flux cleaned = 0.141755 Jy ! Total flux subtracted in 100 components = 0.141755 Jy ! Clean residual min=-0.007611 max=0.013127 Jy/beam ! Clean residual mean=0.000072 rms=0.002763 Jy/beam ! Combined flux in latest and established models = 0.141755 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.141755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158471Jy sigma=0.000709 ! Fit after self-cal, rms=0.158489Jy sigma=0.000709 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=8.072 mas, bpa=-10.46 degrees ! Estimated noise=1481.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021048 Jy ! Component: 100 - total flux cleaned = 0.030782 Jy ! Component: 150 - total flux cleaned = 0.0356554 Jy ! Component: 200 - total flux cleaned = 0.0381266 Jy ! Total flux subtracted in 200 components = 0.0381266 Jy ! Clean residual min=-0.005344 max=0.007077 Jy/beam ! Clean residual mean=-0.000021 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.179882 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.179882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155951Jy sigma=0.000688 ! Fit after self-cal, rms=0.155966Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 0.99 ! LA 0.97 MK 1.06 NL 1.12 OV 0.98 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.00 ! LA 0.97 MK 1.00 NL 1.28 OV 1.05 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.98 ! LA 0.98 MK 1.01 NL 1.53 OV 0.96 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.99 ! LA 0.88 MK 1.01 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.155966Jy sigma=0.000688 ! Fit after self-cal, rms=0.177628Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.92 mas, bmaj=8.089 mas, bpa=-10.35 degrees ! Estimated noise=1501.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137255 Jy ! Component: 100 - total flux cleaned = 0.00171771 Jy ! Component: 150 - total flux cleaned = 0.00176025 Jy ! Component: 200 - total flux cleaned = 0.00176024 Jy ! Total flux subtracted in 200 components = 0.00176024 Jy ! Clean residual min=-0.003873 max=0.004304 Jy/beam ! Clean residual mean=-0.000011 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.181642 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.181642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177587Jy sigma=0.000682 ! Fit after self-cal, rms=0.177902Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177902Jy sigma=0.000682 ! Fit after self-cal, rms=0.180480Jy sigma=0.000682 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=8.073 mas, bpa=-10.29 degrees ! Estimated noise=1512.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132596 Jy ! Component: 100 - total flux cleaned = 0.00168969 Jy ! Component: 150 - total flux cleaned = 0.00171112 Jy ! Component: 200 - total flux cleaned = 0.00169102 Jy ! Total flux subtracted in 200 components = 0.00169102 Jy ! Clean residual min=-0.003941 max=0.004374 Jy/beam ! Clean residual mean=-0.000010 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.183333 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.183333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180440Jy sigma=0.000682 ! Fit after self-cal, rms=0.180452Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.92677e-05 Jy ! Component: 100 - total flux cleaned = -1.26054e-05 Jy ! Component: 150 - total flux cleaned = -3.24044e-05 Jy ! Component: 200 - total flux cleaned = -5.15888e-05 Jy ! Total flux subtracted in 200 components = -5.15888e-05 Jy ! Clean residual min=-0.003853 max=0.004360 Jy/beam ! Clean residual mean=-0.000010 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.183281 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.183281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180446Jy sigma=0.000682 ! Fit after self-cal, rms=0.180446Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180446Jy sigma=0.000682 ! Fit after self-cal, rms=0.181976Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=8.057 mas, bpa=-10.24 degrees ! Estimated noise=1521.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129782 Jy ! Component: 100 - total flux cleaned = 0.00171545 Jy ! Component: 150 - total flux cleaned = 0.00171583 Jy ! Component: 200 - total flux cleaned = 0.00169821 Jy ! Total flux subtracted in 200 components = 0.00169821 Jy ! Clean residual min=-0.003890 max=0.004387 Jy/beam ! Clean residual mean=-0.000009 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.184979 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.184979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181937Jy sigma=0.000682 ! Fit after self-cal, rms=0.181939Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79532e-05 Jy ! Component: 100 - total flux cleaned = -2.83138e-05 Jy ! Component: 150 - total flux cleaned = -2.73804e-05 Jy ! Component: 200 - total flux cleaned = -4.49146e-05 Jy ! Total flux subtracted in 200 components = -4.49146e-05 Jy ! Clean residual min=-0.003812 max=0.004379 Jy/beam ! Clean residual mean=-0.000009 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.184935 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.184935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181934Jy sigma=0.000682 ! Fit after self-cal, rms=0.181933Jy sigma=0.000682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181933Jy sigma=0.000682 ! Fit after self-cal, rms=0.183437Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.565 mas, bmaj=29.95 mas, bpa=-5.15 degrees ! Estimated noise=1983.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149901 Jy ! Component: 100 - total flux cleaned = 0.00150231 Jy ! Component: 150 - total flux cleaned = 0.00150549 Jy ! Component: 200 - total flux cleaned = 0.00150774 Jy ! Total flux subtracted in 200 components = 0.00150774 Jy ! Clean residual min=-0.004728 max=0.004685 Jy/beam ! Clean residual mean=-0.000016 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.186442 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.186442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183413Jy sigma=0.000682 ! Fit after self-cal, rms=0.183404Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.625e-05 Jy ! Component: 100 - total flux cleaned = -8.56703e-05 Jy ! Component: 150 - total flux cleaned = -8.31792e-05 Jy ! Component: 200 - total flux cleaned = -8.18883e-05 Jy ! Total flux subtracted in 200 components = -8.18883e-05 Jy ! Clean residual min=-0.004726 max=0.004689 Jy/beam ! Clean residual mean=-0.000017 rms=0.001563 Jy/beam ! Combined flux in latest and established models = 0.18636 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 61 components and 0.18636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183410Jy sigma=0.000682 ! Fit after self-cal, rms=0.183401Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=8.041 mas, bpa=-10.19 degrees ! Estimated noise=1531.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 8.041 at -10.19 degrees (North through East) ! Clean map min=-0.0036671 max=0.15238 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.286 mas, bmaj=6.764 mas, bpa=-10.96 degrees ! Estimated noise=2825.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115422 Jy ! Component: 100 - total flux cleaned = 0.147741 Jy ! Component: 150 - total flux cleaned = 0.164117 Jy ! Component: 200 - total flux cleaned = 0.173611 Jy ! Total flux subtracted in 200 components = 0.173611 Jy ! Clean residual min=-0.006841 max=0.005952 Jy/beam ! Clean residual mean=0.000015 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.173611 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.173611 Jy ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=8.041 mas, bpa=-10.19 degrees ! Estimated noise=1531.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070762 Jy ! Component: 100 - total flux cleaned = 0.0102654 Jy ! Component: 150 - total flux cleaned = 0.0117191 Jy ! Component: 200 - total flux cleaned = 0.0121771 Jy ! Total flux subtracted in 200 components = 0.0121771 Jy ! Clean residual min=-0.003799 max=0.004363 Jy/beam ! Clean residual mean=-0.000009 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.185788 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 55 components and 0.185788 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.565 mas, bmaj=29.95 mas, bpa=-5.15 degrees ! Estimated noise=1983.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.72977e-05 Jy ! Component: 100 - total flux cleaned = 4.53457e-05 Jy ! Component: 150 - total flux cleaned = 4.38003e-05 Jy ! Component: 200 - total flux cleaned = 4.25612e-05 Jy ! Total flux subtracted in 200 components = 4.25612e-05 Jy ! Clean residual min=-0.004622 max=0.004700 Jy/beam ! Clean residual mean=-0.000018 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.185831 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.54232e-07 Jy ! Component: 100 - total flux cleaned = -9.38217e-08 Jy ! Component: 150 - total flux cleaned = -2.52997e-07 Jy ! Component: 200 - total flux cleaned = -5.25663e-07 Jy ! Total flux subtracted in 200 components = -5.25663e-07 Jy ! Clean residual min=-0.004505 max=0.004625 Jy/beam ! Clean residual mean=-0.000018 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.18583 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.18583 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=8.041 mas, bpa=-10.19 degrees ! Estimated noise=1531.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242028 Jy ! Component: 100 - total flux cleaned = 0.000273575 Jy ! Component: 150 - total flux cleaned = 0.000296585 Jy ! Component: 200 - total flux cleaned = 0.000262078 Jy ! Total flux subtracted in 200 components = 0.000262078 Jy ! Clean residual min=-0.003666 max=0.004417 Jy/beam ! Clean residual mean=-0.000009 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.186093 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.186093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183354Jy sigma=0.000682 ! Fit after self-cal, rms=0.183333Jy sigma=0.000682 wmodel J1042-4143_S_2017_05_31_pus_map.mod ! Writing 62 model components to file: J1042-4143_S_2017_05_31_pus_map.mod wobs J1042-4143_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1042-4143_S_2017_05_31_pus_uvs.fits wwins J1042-4143_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1042-4143_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152659 Jy ! Component: 100 - total flux cleaned = 0.00178865 Jy ! Component: 150 - total flux cleaned = 0.00208236 Jy ! Component: 200 - total flux cleaned = 0.00230363 Jy ! Component: 250 - total flux cleaned = 0.00256524 Jy ! Component: 300 - total flux cleaned = 0.00256637 Jy ! Component: 350 - total flux cleaned = 0.00251786 Jy ! Component: 400 - total flux cleaned = 0.00247217 Jy ! Component: 450 - total flux cleaned = 0.002429 Jy ! Component: 500 - total flux cleaned = 0.00234514 Jy ! Component: 550 - total flux cleaned = 0.00226466 Jy ! Component: 600 - total flux cleaned = 0.00218749 Jy ! Component: 650 - total flux cleaned = 0.00215003 Jy ! Component: 700 - total flux cleaned = 0.0020017 Jy ! Component: 750 - total flux cleaned = 0.00182162 Jy ! Component: 800 - total flux cleaned = 0.0018221 Jy ! Component: 850 - total flux cleaned = 0.00178737 Jy ! Component: 900 - total flux cleaned = 0.00165342 Jy ! Component: 950 - total flux cleaned = 0.00158738 Jy ! Component: 1000 - total flux cleaned = 0.00145726 Jy ! Component: 1050 - total flux cleaned = 0.00145758 Jy ! Component: 1100 - total flux cleaned = 0.00133086 Jy ! Component: 1150 - total flux cleaned = 0.00123703 Jy ! Component: 1200 - total flux cleaned = 0.00111361 Jy ! Component: 1250 - total flux cleaned = 0.0010522 Jy ! Component: 1300 - total flux cleaned = 0.000871478 Jy ! Component: 1350 - total flux cleaned = 0.000782206 Jy ! Component: 1400 - total flux cleaned = 0.000664745 Jy ! Component: 1450 - total flux cleaned = 0.000635731 Jy ! Component: 1500 - total flux cleaned = 0.000520177 Jy ! Component: 1550 - total flux cleaned = 0.000491732 Jy ! Component: 1600 - total flux cleaned = 0.000548423 Jy ! Component: 1650 - total flux cleaned = 0.000604331 Jy ! Component: 1700 - total flux cleaned = 0.000604121 Jy ! Component: 1750 - total flux cleaned = 0.00065946 Jy ! Component: 1800 - total flux cleaned = 0.000769196 Jy ! Component: 1850 - total flux cleaned = 0.000796648 Jy ! Component: 1900 - total flux cleaned = 0.000850915 Jy ! Component: 1950 - total flux cleaned = 0.000905027 Jy ! Component: 2000 - total flux cleaned = 0.000958632 Jy ! Component: 2050 - total flux cleaned = 0.000985329 Jy ! Component: 2100 - total flux cleaned = 0.00103856 Jy ! Component: 2150 - total flux cleaned = 0.00103859 Jy ! Component: 2200 - total flux cleaned = 0.00111826 Jy ! Component: 2250 - total flux cleaned = 0.0011182 Jy ! Component: 2300 - total flux cleaned = 0.00114487 Jy ! Component: 2350 - total flux cleaned = 0.00122443 Jy ! Component: 2400 - total flux cleaned = 0.00130376 Jy ! Component: 2450 - total flux cleaned = 0.00135656 Jy ! Component: 2500 - total flux cleaned = 0.00138306 Jy ! Component: 2550 - total flux cleaned = 0.00140963 Jy ! Component: 2600 - total flux cleaned = 0.00151557 Jy ! Component: 2650 - total flux cleaned = 0.00154218 Jy ! Component: 2700 - total flux cleaned = 0.0015952 Jy ! Component: 2750 - total flux cleaned = 0.00170133 Jy ! Component: 2800 - total flux cleaned = 0.0017543 Jy ! Component: 2850 - total flux cleaned = 0.00183402 Jy ! Component: 2900 - total flux cleaned = 0.00194026 Jy ! Component: 2950 - total flux cleaned = 0.00202014 Jy ! Component: 3000 - total flux cleaned = 0.00204701 Jy ! Component: 3050 - total flux cleaned = 0.00210045 Jy ! Component: 3100 - total flux cleaned = 0.00215405 Jy ! Component: 3150 - total flux cleaned = 0.00220764 Jy ! Component: 3200 - total flux cleaned = 0.00223439 Jy ! Component: 3250 - total flux cleaned = 0.00231524 Jy ! Component: 3300 - total flux cleaned = 0.00228816 Jy ! Component: 3350 - total flux cleaned = 0.00234226 Jy ! Component: 3400 - total flux cleaned = 0.00242395 Jy ! Component: 3450 - total flux cleaned = 0.00236905 Jy ! Component: 3500 - total flux cleaned = 0.00231382 Jy ! Component: 3550 - total flux cleaned = 0.00228599 Jy ! Component: 3600 - total flux cleaned = 0.00220239 Jy ! Component: 3650 - total flux cleaned = 0.00211874 Jy ! Component: 3700 - total flux cleaned = 0.00206257 Jy ! Component: 3750 - total flux cleaned = 0.00200572 Jy ! Component: 3800 - total flux cleaned = 0.00192009 Jy ! Component: 3850 - total flux cleaned = 0.00186234 Jy ! Component: 3900 - total flux cleaned = 0.00174628 Jy ! Component: 3950 - total flux cleaned = 0.00165811 Jy ! Component: 4000 - total flux cleaned = 0.00153979 Jy ! Component: 4050 - total flux cleaned = 0.00142005 Jy ! Total flux subtracted in 4096 components = 0.00126866 Jy ! Clean residual min=-0.001842 max=0.001789 Jy/beam ! Clean residual mean=0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.187361 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 320 components and 0.187361 Jy ![Exited script file: muppet] wmap "J1042-4143_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 8.041 at -10.19 degrees (North through East) ! Clean map min=-0.0026493 max=0.15665 Jy/beam ! Writing clean map to FITS file: J1042-4143_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156654 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000622222 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19159 1.19159 2.38317 4.76634 9.53269 19.0654 38.1308 76.2615 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.156 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 8.041 at -10.19 degrees (North through East) ! Clean map min=-0.0026493 max=0.15665 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1042-4143_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:46:15 2019