! Started logfile: J1042-4143_S_2017_05_01_pus_uvs.log on Wed May 1 18:33:42 2019 obs J1042-4143_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1042-4143_S_2017_05_01_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613655 visibilities/baseline/integration-bin. ! Found source: J1042-4143 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 9168 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1042-4143_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 512 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.854186Jy sigma=0.042876 ! Fit after self-cal, rms=0.838280Jy sigma=0.042732 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.331 mas, bmaj=8.073 mas, bpa=-17.68 degrees ! Estimated noise=1536.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073585 Jy ! Component: 100 - total flux cleaned = 0.106937 Jy ! Total flux subtracted in 100 components = 0.106937 Jy ! Clean residual min=-0.029923 max=0.032024 Jy/beam ! Clean residual mean=0.000488 rms=0.010858 Jy/beam ! Combined flux in latest and established models = 0.106937 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.106937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173235Jy sigma=0.004018 ! Fit after self-cal, rms=0.173046Jy sigma=0.004013 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.276 mas, bmaj=10.51 mas, bpa=-16.32 degrees ! Estimated noise=698.891 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0284835 Jy ! Component: 100 - total flux cleaned = -0.0366438 Jy ! Component: 150 - total flux cleaned = -0.037228 Jy ! Component: 200 - total flux cleaned = -0.0377624 Jy ! Total flux subtracted in 200 components = -0.0377624 Jy ! Clean residual min=-0.034251 max=0.037767 Jy/beam ! Clean residual mean=0.001023 rms=0.013471 Jy/beam ! Combined flux in latest and established models = 0.0691743 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 29 components and 0.0691743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179973Jy sigma=0.002757 ! Fit after self-cal, rms=0.179646Jy sigma=0.002757 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.52 HN 1.38 KP 0.63 ! LA 0.56 MK 0.62 NL 0.76 OV 0.68 ! PT 0.58 SC 1.36 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.57 HN 2.59 KP 0.60 ! LA 0.56 MK 0.58 NL 0.88 OV 0.65 ! PT 0.54 SC 1.38 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.57 HN 1.00* KP 0.57 ! LA 0.56 MK 0.58 NL 0.91 OV 0.56 ! PT 0.53 SC 1.35 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.72 HN 1.00* KP 1.00* ! LA 21.47 MK 0.67 NL 1.00* OV 1.00* ! PT 0.70 SC 1.00* ! ! ! Fit before self-cal, rms=0.179646Jy sigma=0.002757 ! Fit after self-cal, rms=0.092237Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=9.78 mas, bpa=-13.24 degrees ! Estimated noise=705.135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482182 Jy ! Component: 100 - total flux cleaned = 0.000533173 Jy ! Component: 150 - total flux cleaned = 0.000580502 Jy ! Component: 200 - total flux cleaned = 0.000580089 Jy ! Total flux subtracted in 200 components = 0.000580089 Jy ! Clean residual min=-0.002614 max=0.002860 Jy/beam ! Clean residual mean=0.000015 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.0697544 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0697544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092119Jy sigma=0.000669 ! Fit after self-cal, rms=0.093424Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093424Jy sigma=0.000654 ! Fit after self-cal, rms=0.094499Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=9.875 mas, bpa=-13.92 degrees ! Estimated noise=694.789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00064718 Jy ! Component: 100 - total flux cleaned = 0.000682005 Jy ! Component: 150 - total flux cleaned = 0.000715599 Jy ! Component: 200 - total flux cleaned = 0.00074806 Jy ! Total flux subtracted in 200 components = 0.00074806 Jy ! Clean residual min=-0.002185 max=0.002374 Jy/beam ! Clean residual mean=0.000015 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0705025 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 38 components and 0.0705025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094448Jy sigma=0.000650 ! Fit after self-cal, rms=0.094517Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.2059e-05 Jy ! Component: 100 - total flux cleaned = 6.46644e-05 Jy ! Component: 150 - total flux cleaned = 9.52888e-05 Jy ! Component: 200 - total flux cleaned = 0.000125538 Jy ! Total flux subtracted in 200 components = 0.000125538 Jy ! Clean residual min=-0.002136 max=0.002278 Jy/beam ! Clean residual mean=0.000016 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.070628 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.070628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094475Jy sigma=0.000649 ! Fit after self-cal, rms=0.094467Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094467Jy sigma=0.000649 ! Fit after self-cal, rms=0.095459Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=9.839 mas, bpa=-13.93 degrees ! Estimated noise=694.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295779 Jy ! Component: 100 - total flux cleaned = 0.000296167 Jy ! Component: 150 - total flux cleaned = 0.000323058 Jy ! Component: 200 - total flux cleaned = 0.000347906 Jy ! Total flux subtracted in 200 components = 0.000347906 Jy ! Clean residual min=-0.001990 max=0.002310 Jy/beam ! Clean residual mean=0.000011 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0709759 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0709759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095435Jy sigma=0.000647 ! Fit after self-cal, rms=0.095574Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.63539e-05 Jy ! Component: 100 - total flux cleaned = 2.65349e-05 Jy ! Component: 150 - total flux cleaned = 5.12124e-05 Jy ! Component: 200 - total flux cleaned = 7.59126e-05 Jy ! Total flux subtracted in 200 components = 7.59126e-05 Jy ! Clean residual min=-0.001948 max=0.002238 Jy/beam ! Clean residual mean=0.000012 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0710518 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.0710518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095551Jy sigma=0.000647 ! Fit after self-cal, rms=0.095538Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095538Jy sigma=0.000647 ! Fit after self-cal, rms=0.094791Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.23 mas, bmaj=36.86 mas, bpa=-5.72 degrees ! Estimated noise=782.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000715388 Jy ! Component: 100 - total flux cleaned = 0.000728847 Jy ! Component: 150 - total flux cleaned = 0.000754652 Jy ! Component: 200 - total flux cleaned = 0.000767218 Jy ! Total flux subtracted in 200 components = 0.000767218 Jy ! Clean residual min=-0.001532 max=0.001885 Jy/beam ! Clean residual mean=0.000023 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.071819 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.071819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094776Jy sigma=0.000647 ! Fit after self-cal, rms=0.094775Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.43025e-05 Jy ! Component: 100 - total flux cleaned = 5.39082e-05 Jy ! Component: 150 - total flux cleaned = 5.4082e-05 Jy ! Component: 200 - total flux cleaned = 6.56543e-05 Jy ! Total flux subtracted in 200 components = 6.56543e-05 Jy ! Clean residual min=-0.001523 max=0.001902 Jy/beam ! Clean residual mean=0.000024 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0718847 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.0718847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094768Jy sigma=0.000647 ! Fit after self-cal, rms=0.094758Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=9.823 mas, bpa=-13.99 degrees ! Estimated noise=693.993 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 9.823 at -13.99 degrees (North through East) ! Clean map min=-0.0060484 max=0.080107 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=8.225 mas, bpa=-12.32 degrees ! Estimated noise=1473.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637565 Jy ! Component: 100 - total flux cleaned = 0.074145 Jy ! Component: 150 - total flux cleaned = 0.0741159 Jy ! Component: 200 - total flux cleaned = 0.0740334 Jy ! Total flux subtracted in 200 components = 0.0740334 Jy ! Clean residual min=-0.006711 max=0.006529 Jy/beam ! Clean residual mean=-0.000006 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.0740334 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0740334 Jy ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=9.823 mas, bpa=-13.99 degrees ! Estimated noise=693.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456593 Jy ! Component: 100 - total flux cleaned = -0.000437929 Jy ! Component: 150 - total flux cleaned = -0.000440091 Jy ! Component: 200 - total flux cleaned = -0.000579987 Jy ! Total flux subtracted in 200 components = -0.000579987 Jy ! Clean residual min=-0.002337 max=0.002193 Jy/beam ! Clean residual mean=0.000022 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0734534 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.0734534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.23 mas, bmaj=36.86 mas, bpa=-5.72 degrees ! Estimated noise=782.675 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001196 Jy ! Component: 100 - total flux cleaned = -0.000120015 Jy ! Component: 150 - total flux cleaned = -0.000119907 Jy ! Component: 200 - total flux cleaned = -0.000119769 Jy ! Total flux subtracted in 200 components = -0.000119769 Jy ! Clean residual min=-0.001347 max=0.001764 Jy/beam ! Clean residual mean=0.000038 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0733337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.02293e-06 Jy ! Component: 100 - total flux cleaned = -4.69419e-06 Jy ! Component: 150 - total flux cleaned = -6.71421e-06 Jy ! Component: 200 - total flux cleaned = -7.93161e-06 Jy ! Total flux subtracted in 200 components = -7.93161e-06 Jy ! Clean residual min=-0.001332 max=0.001781 Jy/beam ! Clean residual mean=0.000038 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.0733257 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0733258 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=9.823 mas, bpa=-13.99 degrees ! Estimated noise=693.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138215 Jy ! Component: 100 - total flux cleaned = 0.000137948 Jy ! Component: 150 - total flux cleaned = 0.00013455 Jy ! Component: 200 - total flux cleaned = 6.6113e-05 Jy ! Total flux subtracted in 200 components = 6.6113e-05 Jy ! Clean residual min=-0.001855 max=0.001890 Jy/beam ! Clean residual mean=0.000022 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0733919 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0733918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094846Jy sigma=0.000646 ! Fit after self-cal, rms=0.094771Jy sigma=0.000646 wmodel J1042-4143_S_2017_05_01_pus_map.mod ! Writing 33 model components to file: J1042-4143_S_2017_05_01_pus_map.mod wobs J1042-4143_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1042-4143_S_2017_05_01_pus_uvs.fits wwins J1042-4143_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1042-4143_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544236 Jy ! Component: 100 - total flux cleaned = 0.000812336 Jy ! Component: 150 - total flux cleaned = 0.00103471 Jy ! Component: 200 - total flux cleaned = 0.00129671 Jy ! Component: 250 - total flux cleaned = 0.00144745 Jy ! Component: 300 - total flux cleaned = 0.0014957 Jy ! Component: 350 - total flux cleaned = 0.00151962 Jy ! Component: 400 - total flux cleaned = 0.00158863 Jy ! Component: 450 - total flux cleaned = 0.0015885 Jy ! Component: 500 - total flux cleaned = 0.00160974 Jy ! Component: 550 - total flux cleaned = 0.00156651 Jy ! Component: 600 - total flux cleaned = 0.00150388 Jy ! Component: 650 - total flux cleaned = 0.0015041 Jy ! Component: 700 - total flux cleaned = 0.00148439 Jy ! Component: 750 - total flux cleaned = 0.00152397 Jy ! Component: 800 - total flux cleaned = 0.00154315 Jy ! Component: 850 - total flux cleaned = 0.00156252 Jy ! Component: 900 - total flux cleaned = 0.00163809 Jy ! Component: 950 - total flux cleaned = 0.00165646 Jy ! Component: 1000 - total flux cleaned = 0.00165644 Jy ! Component: 1050 - total flux cleaned = 0.00165642 Jy ! Component: 1100 - total flux cleaned = 0.00167486 Jy ! Component: 1150 - total flux cleaned = 0.00169296 Jy ! Component: 1200 - total flux cleaned = 0.00171121 Jy ! Component: 1250 - total flux cleaned = 0.00176615 Jy ! Component: 1300 - total flux cleaned = 0.00180281 Jy ! Component: 1350 - total flux cleaned = 0.0018581 Jy ! Component: 1400 - total flux cleaned = 0.00191342 Jy ! Component: 1450 - total flux cleaned = 0.00196898 Jy ! Component: 1500 - total flux cleaned = 0.002025 Jy ! Component: 1550 - total flux cleaned = 0.00204376 Jy ! Component: 1600 - total flux cleaned = 0.00206271 Jy ! Component: 1650 - total flux cleaned = 0.00206289 Jy ! Component: 1700 - total flux cleaned = 0.00208254 Jy ! Component: 1750 - total flux cleaned = 0.00208241 Jy ! Component: 1800 - total flux cleaned = 0.00206232 Jy ! Component: 1850 - total flux cleaned = 0.00204161 Jy ! Component: 1900 - total flux cleaned = 0.00204134 Jy ! Component: 1950 - total flux cleaned = 0.00204122 Jy ! Component: 2000 - total flux cleaned = 0.00206345 Jy ! Component: 2050 - total flux cleaned = 0.00208711 Jy ! Component: 2100 - total flux cleaned = 0.00211091 Jy ! Component: 2150 - total flux cleaned = 0.00213523 Jy ! Component: 2200 - total flux cleaned = 0.00216202 Jy ! Component: 2250 - total flux cleaned = 0.00216224 Jy ! Component: 2300 - total flux cleaned = 0.00219012 Jy ! Component: 2350 - total flux cleaned = 0.00221913 Jy ! Component: 2400 - total flux cleaned = 0.00224954 Jy ! Component: 2450 - total flux cleaned = 0.00228099 Jy ! Component: 2500 - total flux cleaned = 0.00231401 Jy ! Component: 2550 - total flux cleaned = 0.00231435 Jy ! Component: 2600 - total flux cleaned = 0.00235021 Jy ! Component: 2650 - total flux cleaned = 0.00235055 Jy ! Component: 2700 - total flux cleaned = 0.00235124 Jy ! Component: 2750 - total flux cleaned = 0.00239023 Jy ! Component: 2800 - total flux cleaned = 0.00243135 Jy ! Component: 2850 - total flux cleaned = 0.00243227 Jy ! Component: 2900 - total flux cleaned = 0.00247799 Jy ! Component: 2950 - total flux cleaned = 0.00252596 Jy ! Component: 3000 - total flux cleaned = 0.00252644 Jy ! Component: 3050 - total flux cleaned = 0.00252568 Jy ! Component: 3100 - total flux cleaned = 0.00257819 Jy ! Component: 3150 - total flux cleaned = 0.00257773 Jy ! Component: 3200 - total flux cleaned = 0.00263462 Jy ! Component: 3250 - total flux cleaned = 0.00263403 Jy ! Component: 3300 - total flux cleaned = 0.00269611 Jy ! Component: 3350 - total flux cleaned = 0.002761 Jy ! Component: 3400 - total flux cleaned = 0.00276243 Jy ! Component: 3450 - total flux cleaned = 0.00276128 Jy ! Component: 3500 - total flux cleaned = 0.00283366 Jy ! Component: 3550 - total flux cleaned = 0.00283458 Jy ! Component: 3600 - total flux cleaned = 0.00291407 Jy ! Component: 3650 - total flux cleaned = 0.00291504 Jy ! Component: 3700 - total flux cleaned = 0.00291528 Jy ! Component: 3750 - total flux cleaned = 0.00300102 Jy ! Component: 3800 - total flux cleaned = 0.00300174 Jy ! Component: 3850 - total flux cleaned = 0.00309859 Jy ! Component: 3900 - total flux cleaned = 0.00309853 Jy ! Component: 3950 - total flux cleaned = 0.00310007 Jy ! Component: 4000 - total flux cleaned = 0.00310113 Jy ! Component: 4050 - total flux cleaned = 0.00321238 Jy ! Total flux subtracted in 4096 components = 0.00321145 Jy ! Clean residual min=-0.006432 max=0.006967 Jy/beam ! Clean residual mean=-0.000001 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.0766033 Jy keep ! Adding 154 model components to the UV plane model. ! The established model now contains 187 components and 0.0766033 Jy ![Exited script file: muppet] wmap "J1042-4143_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 9.823 at -13.99 degrees (North through East) ! Clean map min=-0.013643 max=0.077193 Jy/beam ! Writing clean map to FITS file: J1042-4143_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0771931 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00204335 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.94119 7.94119 15.8824 31.7648 63.5296 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0061 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 9.823 at -13.99 degrees (North through East) ! Clean map min=-0.013643 max=0.077193 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1042-4143_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:33:47 2019