! Started logfile: J1042+1203_S_2017_01_21_pus_uvs.log on Sun May 5 15:52:42 2019 obs J1042+1203_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1042+1203_S_2017_01_21_pus_uva.fits ! AN table 1: 218 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.646152 visibilities/baseline/integration-bin. ! Found source: J1042+1203 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 20284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1042+1203_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 379 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 379 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 379 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 821 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898973Jy sigma=0.007184 ! Fit after self-cal, rms=0.864885Jy sigma=0.006883 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=5.73 mas, bpa=-3.399 degrees ! Estimated noise=1009.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106824 Jy ! Component: 100 - total flux cleaned = 0.157154 Jy ! Total flux subtracted in 100 components = 0.157154 Jy ! Clean residual min=-0.035268 max=0.057840 Jy/beam ! Clean residual mean=-0.000526 rms=0.009496 Jy/beam ! Combined flux in latest and established models = 0.157154 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.157154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245077Jy sigma=0.002022 ! Fit after self-cal, rms=0.244328Jy sigma=0.002015 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=6.55 mas, bpa=-2.634 degrees ! Estimated noise=680.987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702256 Jy ! Component: 100 - total flux cleaned = 0.111592 Jy ! Component: 150 - total flux cleaned = 0.139181 Jy ! Component: 200 - total flux cleaned = 0.15813 Jy ! Total flux subtracted in 200 components = 0.15813 Jy ! Clean residual min=-0.049710 max=0.092095 Jy/beam ! Clean residual mean=-0.001228 rms=0.017100 Jy/beam ! Combined flux in latest and established models = 0.315284 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.315284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224911Jy sigma=0.001822 ! Fit after self-cal, rms=0.223610Jy sigma=0.001809 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.81 FD 1.00* HN 1.26 LA 0.69 ! MK 1.16 NL 1.17 OV 3.49 PT 0.54 ! SC 1.23 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.88 FD 1.00* HN 1.32 LA 0.65 ! MK 1.13 NL 1.19 OV 3.64 PT 0.52 ! SC 1.34 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.80 FD 1.00* HN 1.29 LA 0.66 ! MK 1.15 NL 1.19 OV 3.24 PT 0.53 ! SC 1.33 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.99 FD 1.00* HN 1.52 LA 0.55 ! MK 1.27 NL 1.00* OV 3.33 PT 0.53 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.223610Jy sigma=0.001809 ! Fit after self-cal, rms=0.786120Jy sigma=0.001401 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.278 mas, bpa=-5.906 degrees ! Estimated noise=802.864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015472 Jy ! Component: 100 - total flux cleaned = 0.0161619 Jy ! Component: 150 - total flux cleaned = 0.0161759 Jy ! Component: 200 - total flux cleaned = 0.016187 Jy ! Total flux subtracted in 200 components = 0.016187 Jy ! Clean residual min=-0.051271 max=0.061792 Jy/beam ! Clean residual mean=-0.000328 rms=0.013491 Jy/beam ! Combined flux in latest and established models = 0.331471 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.331471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780930Jy sigma=0.001386 ! Fit after self-cal, rms=0.791866Jy sigma=0.001358 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.791866Jy sigma=0.001358 ! Fit after self-cal, rms=0.692198Jy sigma=0.001126 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=6.655 mas, bpa=-3.511 degrees ! Estimated noise=877.293 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019847 Jy ! Component: 100 - total flux cleaned = 0.0271554 Jy ! Component: 150 - total flux cleaned = 0.0271755 Jy ! Component: 200 - total flux cleaned = 0.0269622 Jy ! Total flux subtracted in 200 components = 0.0269622 Jy ! Clean residual min=-0.030538 max=0.045262 Jy/beam ! Clean residual mean=0.000182 rms=0.009537 Jy/beam ! Combined flux in latest and established models = 0.358433 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.358433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.690101Jy sigma=0.001129 ! Fit after self-cal, rms=0.690561Jy sigma=0.001112 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233154 Jy ! Component: 100 - total flux cleaned = 0.0235432 Jy ! Component: 150 - total flux cleaned = 0.0213735 Jy ! Component: 200 - total flux cleaned = 0.0200809 Jy ! Total flux subtracted in 200 components = 0.0200809 Jy ! Clean residual min=-0.033950 max=0.035843 Jy/beam ! Clean residual mean=0.000330 rms=0.009589 Jy/beam ! Combined flux in latest and established models = 0.378514 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 0.378514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.678232Jy sigma=0.001121 ! Fit after self-cal, rms=0.674944Jy sigma=0.001103 ! Inverting map ! Added new window around map position (36.5, -105). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.035495 Jy ! Component: 100 - total flux cleaned = 0.0429168 Jy ! Component: 150 - total flux cleaned = 0.0492549 Jy ! Component: 200 - total flux cleaned = 0.0521316 Jy ! Total flux subtracted in 200 components = 0.0521316 Jy ! Clean residual min=-0.031515 max=0.034283 Jy/beam ! Clean residual mean=0.000224 rms=0.009447 Jy/beam ! Combined flux in latest and established models = 0.430646 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 100 components and 0.430645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.661090Jy sigma=0.001115 ! Fit after self-cal, rms=0.658351Jy sigma=0.001094 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.658351Jy sigma=0.001094 ! Fit after self-cal, rms=0.499181Jy sigma=0.000962 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=6.919 mas, bpa=-4.79 degrees ! Estimated noise=864.533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292012 Jy ! Component: 100 - total flux cleaned = 0.0401863 Jy ! Component: 150 - total flux cleaned = 0.0448753 Jy ! Component: 200 - total flux cleaned = 0.0448807 Jy ! Total flux subtracted in 200 components = 0.0448807 Jy ! Clean residual min=-0.025183 max=0.028766 Jy/beam ! Clean residual mean=0.000111 rms=0.007482 Jy/beam ! Combined flux in latest and established models = 0.475526 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 119 components and 0.475526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489818Jy sigma=0.000953 ! Fit after self-cal, rms=0.490058Jy sigma=0.000934 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898042 Jy ! Component: 100 - total flux cleaned = 0.0102814 Jy ! Component: 150 - total flux cleaned = 0.0113339 Jy ! Component: 200 - total flux cleaned = 0.0132029 Jy ! Total flux subtracted in 200 components = 0.0132029 Jy ! Clean residual min=-0.025030 max=0.026957 Jy/beam ! Clean residual mean=0.000146 rms=0.007556 Jy/beam ! Combined flux in latest and established models = 0.488729 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 132 components and 0.488729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.484171Jy sigma=0.000936 ! Fit after self-cal, rms=0.483080Jy sigma=0.000930 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.483080Jy sigma=0.000930 ! Fit after self-cal, rms=0.391010Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.898 mas, bmaj=10.92 mas, bpa=-3.364 degrees ! Estimated noise=972.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160986 Jy ! Component: 100 - total flux cleaned = 0.0188411 Jy ! Component: 150 - total flux cleaned = 0.0221802 Jy ! Component: 200 - total flux cleaned = 0.0207498 Jy ! Total flux subtracted in 200 components = 0.0207498 Jy ! Clean residual min=-0.030907 max=0.034833 Jy/beam ! Clean residual mean=0.000228 rms=0.009963 Jy/beam ! Combined flux in latest and established models = 0.509479 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 0.509479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387066Jy sigma=0.000891 ! Fit after self-cal, rms=0.385275Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242049 Jy ! Component: 100 - total flux cleaned = 0.000691479 Jy ! Component: 150 - total flux cleaned = -0.000800554 Jy ! Component: 200 - total flux cleaned = -0.00181779 Jy ! Total flux subtracted in 200 components = -0.00181779 Jy ! Clean residual min=-0.032331 max=0.033579 Jy/beam ! Clean residual mean=0.000264 rms=0.009928 Jy/beam ! Combined flux in latest and established models = 0.507661 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 139 components and 0.507661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383215Jy sigma=0.000897 ! Fit after self-cal, rms=0.382935Jy sigma=0.000895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=7.002 mas, bpa=-4.466 degrees ! Estimated noise=875.976 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.388 x 7.002 at -4.466 degrees (North through East) ! Clean map min=-0.034593 max=0.18722 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=5.885 mas, bpa=-4.774 degrees ! Estimated noise=1386.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151363 Jy ! Component: 100 - total flux cleaned = 0.237942 Jy ! Component: 150 - total flux cleaned = 0.295839 Jy ! Component: 200 - total flux cleaned = 0.339336 Jy ! Total flux subtracted in 200 components = 0.339336 Jy ! Clean residual min=-0.027457 max=0.038790 Jy/beam ! Clean residual mean=-0.000139 rms=0.007923 Jy/beam ! Combined flux in latest and established models = 0.339336 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.339336 Jy ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=7.002 mas, bpa=-4.466 degrees ! Estimated noise=875.976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22, 37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567156 Jy ! Component: 100 - total flux cleaned = 0.0944245 Jy ! Component: 150 - total flux cleaned = 0.113174 Jy ! Component: 200 - total flux cleaned = 0.126902 Jy ! Total flux subtracted in 200 components = 0.126902 Jy ! Clean residual min=-0.025557 max=0.027452 Jy/beam ! Clean residual mean=0.000056 rms=0.007341 Jy/beam ! Combined flux in latest and established models = 0.466238 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 56 components and 0.466238 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.898 mas, bmaj=10.92 mas, bpa=-3.364 degrees ! Estimated noise=972.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191213 Jy ! Component: 100 - total flux cleaned = 0.0253915 Jy ! Component: 150 - total flux cleaned = 0.027149 Jy ! Component: 200 - total flux cleaned = 0.0271975 Jy ! Total flux subtracted in 200 components = 0.0271975 Jy ! Clean residual min=-0.032190 max=0.035383 Jy/beam ! Clean residual mean=0.000213 rms=0.010245 Jy/beam ! Combined flux in latest and established models = 0.493435 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000675541 Jy ! Component: 100 - total flux cleaned = -0.00130647 Jy ! Component: 150 - total flux cleaned = -0.00126774 Jy ! Component: 200 - total flux cleaned = -0.00126148 Jy ! Total flux subtracted in 200 components = -0.00126148 Jy ! Clean residual min=-0.030569 max=0.033208 Jy/beam ! Clean residual mean=0.000241 rms=0.009900 Jy/beam ! Combined flux in latest and established models = 0.492174 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 94 components and 0.492174 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=7.002 mas, bpa=-4.466 degrees ! Estimated noise=875.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420455 Jy ! Component: 100 - total flux cleaned = 0.00483958 Jy ! Component: 150 - total flux cleaned = 0.00485031 Jy ! Component: 200 - total flux cleaned = 0.00428534 Jy ! Total flux subtracted in 200 components = 0.00428534 Jy ! Clean residual min=-0.023639 max=0.024796 Jy/beam ! Clean residual mean=0.000131 rms=0.006574 Jy/beam ! Combined flux in latest and established models = 0.496459 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.496459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373696Jy sigma=0.000876 ! Fit after self-cal, rms=0.372517Jy sigma=0.000851 wmodel J1042+1203_S_2017_01_21_pus_map.mod ! Writing 112 model components to file: J1042+1203_S_2017_01_21_pus_map.mod wobs J1042+1203_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1042+1203_S_2017_01_21_pus_uvs.fits wwins J1042+1203_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1042+1203_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987616 Jy ! Component: 100 - total flux cleaned = 0.0122496 Jy ! Component: 150 - total flux cleaned = 0.0152295 Jy ! Component: 200 - total flux cleaned = 0.0180888 Jy ! Component: 250 - total flux cleaned = 0.0194556 Jy ! Component: 300 - total flux cleaned = 0.0211025 Jy ! Component: 350 - total flux cleaned = 0.0220703 Jy ! Component: 400 - total flux cleaned = 0.0233277 Jy ! Component: 450 - total flux cleaned = 0.0242467 Jy ! Component: 500 - total flux cleaned = 0.024551 Jy ! Component: 550 - total flux cleaned = 0.0248479 Jy ! Component: 600 - total flux cleaned = 0.0251353 Jy ! Component: 650 - total flux cleaned = 0.0251304 Jy ! Component: 700 - total flux cleaned = 0.0256911 Jy ! Component: 750 - total flux cleaned = 0.0248594 Jy ! Component: 800 - total flux cleaned = 0.0251331 Jy ! Component: 850 - total flux cleaned = 0.0245985 Jy ! Component: 900 - total flux cleaned = 0.0251294 Jy ! Component: 950 - total flux cleaned = 0.0246111 Jy ! Component: 1000 - total flux cleaned = 0.0248737 Jy ! Component: 1050 - total flux cleaned = 0.0258853 Jy ! Component: 1100 - total flux cleaned = 0.0263828 Jy ! Component: 1150 - total flux cleaned = 0.0266297 Jy ! Component: 1200 - total flux cleaned = 0.0273612 Jy ! Component: 1250 - total flux cleaned = 0.0290375 Jy ! Component: 1300 - total flux cleaned = 0.0295086 Jy ! Component: 1350 - total flux cleaned = 0.0299781 Jy ! Component: 1400 - total flux cleaned = 0.0311358 Jy ! Component: 1450 - total flux cleaned = 0.0322752 Jy ! Component: 1500 - total flux cleaned = 0.0329523 Jy ! Component: 1550 - total flux cleaned = 0.0336193 Jy ! Component: 1600 - total flux cleaned = 0.0342788 Jy ! Component: 1650 - total flux cleaned = 0.0340616 Jy ! Component: 1700 - total flux cleaned = 0.0353547 Jy ! Component: 1750 - total flux cleaned = 0.0355675 Jy ! Component: 1800 - total flux cleaned = 0.0364101 Jy ! Component: 1850 - total flux cleaned = 0.0362013 Jy ! Component: 1900 - total flux cleaned = 0.0368191 Jy ! Component: 1950 - total flux cleaned = 0.0372271 Jy ! Component: 2000 - total flux cleaned = 0.037428 Jy ! Component: 2050 - total flux cleaned = 0.0382262 Jy ! Component: 2100 - total flux cleaned = 0.0390175 Jy ! Component: 2150 - total flux cleaned = 0.0392139 Jy ! Component: 2200 - total flux cleaned = 0.0394076 Jy ! Component: 2250 - total flux cleaned = 0.0397961 Jy ! Component: 2300 - total flux cleaned = 0.0413175 Jy ! Component: 2350 - total flux cleaned = 0.0422579 Jy ! Component: 2400 - total flux cleaned = 0.0426322 Jy ! Component: 2450 - total flux cleaned = 0.0426347 Jy ! Component: 2500 - total flux cleaned = 0.0439157 Jy ! Component: 2550 - total flux cleaned = 0.0440966 Jy ! Component: 2600 - total flux cleaned = 0.0453555 Jy ! Component: 2650 - total flux cleaned = 0.0449993 Jy ! Component: 2700 - total flux cleaned = 0.0455293 Jy ! Component: 2750 - total flux cleaned = 0.046404 Jy ! Component: 2800 - total flux cleaned = 0.047096 Jy ! Component: 2850 - total flux cleaned = 0.0470961 Jy ! Component: 2900 - total flux cleaned = 0.0484599 Jy ! Component: 2950 - total flux cleaned = 0.0486282 Jy ! Component: 3000 - total flux cleaned = 0.0486261 Jy ! Component: 3050 - total flux cleaned = 0.0492899 Jy ! Component: 3100 - total flux cleaned = 0.0497833 Jy ! Component: 3150 - total flux cleaned = 0.0496184 Jy ! Component: 3200 - total flux cleaned = 0.0499441 Jy ! Component: 3250 - total flux cleaned = 0.0501063 Jy ! Component: 3300 - total flux cleaned = 0.0501047 Jy ! Component: 3350 - total flux cleaned = 0.0501064 Jy ! Component: 3400 - total flux cleaned = 0.0497928 Jy ! Component: 3450 - total flux cleaned = 0.0502633 Jy ! Component: 3500 - total flux cleaned = 0.0505717 Jy ! Component: 3550 - total flux cleaned = 0.0505731 Jy ! Component: 3600 - total flux cleaned = 0.0505744 Jy ! Component: 3650 - total flux cleaned = 0.0507274 Jy ! Component: 3700 - total flux cleaned = 0.0507285 Jy ! Component: 3750 - total flux cleaned = 0.050578 Jy ! Component: 3800 - total flux cleaned = 0.0505797 Jy ! Component: 3850 - total flux cleaned = 0.0510228 Jy ! Component: 3900 - total flux cleaned = 0.0505858 Jy ! Component: 3950 - total flux cleaned = 0.0513122 Jy ! Component: 4000 - total flux cleaned = 0.0511686 Jy ! Component: 4050 - total flux cleaned = 0.0511696 Jy ! Total flux subtracted in 4096 components = 0.0513115 Jy ! Clean residual min=-0.007475 max=0.007087 Jy/beam ! Clean residual mean=-0.000005 rms=0.002911 Jy/beam ! Combined flux in latest and established models = 0.547771 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 416 components and 0.547771 Jy ![Exited script file: muppet] wmap "J1042+1203_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.388 x 7.002 at -4.466 degrees (North through East) ! Clean map min=-0.024832 max=0.18649 Jy/beam ! Writing clean map to FITS file: J1042+1203_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.186487 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00290875 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.6793 4.6793 9.35859 18.7172 37.4344 74.8687 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0087 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.186 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.388 x 7.002 at -4.466 degrees (North through East) ! Clean map min=-0.024832 max=0.18649 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1042+1203_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:52:47 2019