! Started logfile: J1041-4740_S_2017_05_01_pus_uvs.log on Wed May 1 18:33:38 2019 obs J1041-4740_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1041-4740_S_2017_05_01_pus_uva.fits ! AN table 1: 203 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.389929 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1041-4740 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1041-4740_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 737 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1338 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.577248Jy sigma=0.037727 ! Fit after self-cal, rms=0.526889Jy sigma=0.037570 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.106 mas, bmaj=7.405 mas, bpa=-19.58 degrees ! Estimated noise=1140.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.324034 Jy ! Component: 100 - total flux cleaned = 0.503649 Jy ! Total flux subtracted in 100 components = 0.503649 Jy ! Clean residual min=-0.109955 max=0.120839 Jy/beam ! Clean residual mean=0.000322 rms=0.036010 Jy/beam ! Combined flux in latest and established models = 0.503649 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.503649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.746549Jy sigma=0.016855 ! Fit after self-cal, rms=0.746402Jy sigma=0.016855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=10.18 mas, bpa=-15.71 degrees ! Estimated noise=621.877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601824 Jy ! Component: 100 - total flux cleaned = 0.00252434 Jy ! Component: 150 - total flux cleaned = 0.00104249 Jy ! Component: 200 - total flux cleaned = -0.000231064 Jy ! Total flux subtracted in 200 components = -0.000231064 Jy ! Clean residual min=-0.202954 max=0.219861 Jy/beam ! Clean residual mean=0.005172 rms=0.080600 Jy/beam ! Combined flux in latest and established models = 0.503418 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.503418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.724322Jy sigma=0.017052 ! Fit after self-cal, rms=0.723916Jy sigma=0.017052 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.62 HN 1.00* KP 0.59 ! LA 0.57 MK 0.66 NL 1.00* OV 0.89 ! PT 0.54 SC 1.43 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.65 HN 1.00* KP 0.57 ! LA 0.54 MK 0.65 NL 1.00* OV 0.91 ! PT 0.52 SC 1.45 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.67 HN 1.00* KP 0.57 ! LA 0.54 MK 0.66 NL 1.00* OV 0.84 ! PT 0.52 SC 1.34 ! ! ! Correcting IF 4. ! A total of 276 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.61 HN 1.00* KP 1.00* ! LA 33.96 MK 0.84 NL 1.00* OV 1.00* ! PT 0.58 SC 1.00* ! ! ! Fit before self-cal, rms=0.723916Jy sigma=0.017052 ! Fit after self-cal, rms=0.916064Jy sigma=0.001276 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=9.68 mas, bpa=-12.6 degrees ! Estimated noise=632.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530632 Jy ! Component: 100 - total flux cleaned = 0.0482723 Jy ! Component: 150 - total flux cleaned = 0.0442933 Jy ! Component: 200 - total flux cleaned = 0.0409103 Jy ! Total flux subtracted in 200 components = 0.0409103 Jy ! Clean residual min=-0.026131 max=0.036043 Jy/beam ! Clean residual mean=0.000315 rms=0.007637 Jy/beam ! Combined flux in latest and established models = 0.544328 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.544328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.909291Jy sigma=0.001052 ! Fit after self-cal, rms=0.908812Jy sigma=0.001008 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.908812Jy sigma=0.001008 ! Fit after self-cal, rms=0.976663Jy sigma=0.000961 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=9.43 mas, bpa=-12.72 degrees ! Estimated noise=611.953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022005 Jy ! Component: 100 - total flux cleaned = 0.0200947 Jy ! Component: 150 - total flux cleaned = 0.0180716 Jy ! Component: 200 - total flux cleaned = 0.0166727 Jy ! Total flux subtracted in 200 components = 0.0166727 Jy ! Clean residual min=-0.020091 max=0.026376 Jy/beam ! Clean residual mean=0.000135 rms=0.005880 Jy/beam ! Combined flux in latest and established models = 0.561001 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.561001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.975303Jy sigma=0.000908 ! Fit after self-cal, rms=0.975125Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00768168 Jy ! Component: 100 - total flux cleaned = 0.00666617 Jy ! Component: 150 - total flux cleaned = 0.00576628 Jy ! Component: 200 - total flux cleaned = 0.00467617 Jy ! Total flux subtracted in 200 components = 0.00467617 Jy ! Clean residual min=-0.018915 max=0.019109 Jy/beam ! Clean residual mean=0.000210 rms=0.005319 Jy/beam ! Combined flux in latest and established models = 0.565677 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 60 components and 0.565677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974611Jy sigma=0.000866 ! Fit after self-cal, rms=0.974556Jy sigma=0.000858 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.974556Jy sigma=0.000858 ! Fit after self-cal, rms=0.928158Jy sigma=0.000817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=9.388 mas, bpa=-12.53 degrees ! Estimated noise=614.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109447 Jy ! Component: 100 - total flux cleaned = 0.011247 Jy ! Component: 150 - total flux cleaned = 0.0107669 Jy ! Component: 200 - total flux cleaned = 0.0101369 Jy ! Total flux subtracted in 200 components = 0.0101369 Jy ! Clean residual min=-0.014326 max=0.017021 Jy/beam ! Clean residual mean=0.000105 rms=0.004311 Jy/beam ! Combined flux in latest and established models = 0.575814 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.575814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.927636Jy sigma=0.000796 ! Fit after self-cal, rms=0.927598Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414924 Jy ! Component: 100 - total flux cleaned = 0.00350894 Jy ! Component: 150 - total flux cleaned = 0.00293423 Jy ! Component: 200 - total flux cleaned = 0.00240429 Jy ! Total flux subtracted in 200 components = 0.00240429 Jy ! Clean residual min=-0.013292 max=0.013613 Jy/beam ! Clean residual mean=0.000146 rms=0.003993 Jy/beam ! Combined flux in latest and established models = 0.578218 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 0.578218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.927406Jy sigma=0.000778 ! Fit after self-cal, rms=0.927393Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.927393Jy sigma=0.000776 ! Fit after self-cal, rms=0.841619Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.11 mas, bmaj=40.22 mas, bpa=-7.85 degrees ! Estimated noise=693.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00777719 Jy ! Component: 100 - total flux cleaned = 0.00723922 Jy ! Component: 150 - total flux cleaned = 0.00690223 Jy ! Component: 200 - total flux cleaned = 0.0068972 Jy ! Total flux subtracted in 200 components = 0.0068972 Jy ! Clean residual min=-0.012858 max=0.014624 Jy/beam ! Clean residual mean=0.000150 rms=0.005006 Jy/beam ! Combined flux in latest and established models = 0.585115 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.585116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.841368Jy sigma=0.000755 ! Fit after self-cal, rms=0.841353Jy sigma=0.000752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284912 Jy ! Component: 100 - total flux cleaned = 0.00218898 Jy ! Component: 150 - total flux cleaned = 0.00159817 Jy ! Component: 200 - total flux cleaned = 0.00106227 Jy ! Total flux subtracted in 200 components = 0.00106227 Jy ! Clean residual min=-0.012495 max=0.013671 Jy/beam ! Clean residual mean=0.000193 rms=0.004692 Jy/beam ! Combined flux in latest and established models = 0.586178 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.586178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.841277Jy sigma=0.000748 ! Fit after self-cal, rms=0.841270Jy sigma=0.000747 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=9.381 mas, bpa=-12.56 degrees ! Estimated noise=615.381 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 9.381 at -12.56 degrees (North through East) ! Clean map min=-0.022105 max=0.44105 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.341 mas, bmaj=6.901 mas, bpa=-11.55 degrees ! Estimated noise=1341.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333338 Jy ! Component: 100 - total flux cleaned = 0.47332 Jy ! Component: 150 - total flux cleaned = 0.512174 Jy ! Component: 200 - total flux cleaned = 0.534004 Jy ! Total flux subtracted in 200 components = 0.534004 Jy ! Clean residual min=-0.031192 max=0.041758 Jy/beam ! Clean residual mean=-0.000267 rms=0.007528 Jy/beam ! Combined flux in latest and established models = 0.534004 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.534004 Jy ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=9.381 mas, bpa=-12.56 degrees ! Estimated noise=615.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364886 Jy ! Component: 100 - total flux cleaned = 0.0496719 Jy ! Component: 150 - total flux cleaned = 0.052951 Jy ! Component: 200 - total flux cleaned = 0.0535309 Jy ! Total flux subtracted in 200 components = 0.0535309 Jy ! Clean residual min=-0.015441 max=0.022708 Jy/beam ! Clean residual mean=0.000059 rms=0.004406 Jy/beam ! Combined flux in latest and established models = 0.587535 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.587535 Jy ! Inverting map ! Added new window around map position (10.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124846 Jy ! Component: 100 - total flux cleaned = 0.0158793 Jy ! Component: 150 - total flux cleaned = 0.0178138 Jy ! Component: 200 - total flux cleaned = 0.0182324 Jy ! Total flux subtracted in 200 components = 0.0182324 Jy ! Clean residual min=-0.012924 max=0.014251 Jy/beam ! Clean residual mean=0.000314 rms=0.003649 Jy/beam ! Combined flux in latest and established models = 0.605768 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.605768 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.11 mas, bmaj=40.22 mas, bpa=-7.85 degrees ! Estimated noise=693.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00456217 Jy ! Component: 100 - total flux cleaned = -0.00515322 Jy ! Component: 150 - total flux cleaned = -0.00551453 Jy ! Component: 200 - total flux cleaned = -0.00621822 Jy ! Total flux subtracted in 200 components = -0.00621822 Jy ! Clean residual min=-0.015501 max=0.013052 Jy/beam ! Clean residual mean=0.000422 rms=0.004779 Jy/beam ! Combined flux in latest and established models = 0.599549 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505285 Jy ! Component: 100 - total flux cleaned = -0.00115144 Jy ! Component: 150 - total flux cleaned = -0.00162873 Jy ! Component: 200 - total flux cleaned = -0.00207165 Jy ! Total flux subtracted in 200 components = -0.00207165 Jy ! Clean residual min=-0.014208 max=0.012862 Jy/beam ! Clean residual mean=0.000402 rms=0.004519 Jy/beam ! Combined flux in latest and established models = 0.597478 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.597478 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=9.381 mas, bpa=-12.56 degrees ! Estimated noise=615.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252577 Jy ! Component: 100 - total flux cleaned = 0.00225266 Jy ! Component: 150 - total flux cleaned = 0.0011993 Jy ! Component: 200 - total flux cleaned = 0.000704147 Jy ! Total flux subtracted in 200 components = 0.000704147 Jy ! Clean residual min=-0.010963 max=0.011761 Jy/beam ! Clean residual mean=0.000254 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.598182 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 87 components and 0.598182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.841234Jy sigma=0.000747 ! Fit after self-cal, rms=0.841189Jy sigma=0.000744 wmodel J1041-4740_S_2017_05_01_pus_map.mod ! Writing 87 model components to file: J1041-4740_S_2017_05_01_pus_map.mod wobs J1041-4740_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1041-4740_S_2017_05_01_pus_uvs.fits wwins J1041-4740_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J1041-4740_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149875 Jy ! Component: 100 - total flux cleaned = 0.00202319 Jy ! Component: 150 - total flux cleaned = 0.00296875 Jy ! Component: 200 - total flux cleaned = 0.0032668 Jy ! Component: 250 - total flux cleaned = 0.0035256 Jy ! Component: 300 - total flux cleaned = 0.00388842 Jy ! Component: 350 - total flux cleaned = 0.00422351 Jy ! Component: 400 - total flux cleaned = 0.00528809 Jy ! Component: 450 - total flux cleaned = 0.00650158 Jy ! Component: 500 - total flux cleaned = 0.00755864 Jy ! Component: 550 - total flux cleaned = 0.00847462 Jy ! Component: 600 - total flux cleaned = 0.00953163 Jy ! Component: 650 - total flux cleaned = 0.0105494 Jy ! Component: 700 - total flux cleaned = 0.0109589 Jy ! Component: 750 - total flux cleaned = 0.0118357 Jy ! Component: 800 - total flux cleaned = 0.0126838 Jy ! Component: 850 - total flux cleaned = 0.0132839 Jy ! Component: 900 - total flux cleaned = 0.0137946 Jy ! Component: 950 - total flux cleaned = 0.0142932 Jy ! Component: 1000 - total flux cleaned = 0.0148485 Jy ! Component: 1050 - total flux cleaned = 0.0153231 Jy ! Component: 1100 - total flux cleaned = 0.0155873 Jy ! Component: 1150 - total flux cleaned = 0.0158481 Jy ! Component: 1200 - total flux cleaned = 0.0162907 Jy ! Component: 1250 - total flux cleaned = 0.0163526 Jy ! Component: 1300 - total flux cleaned = 0.0168976 Jy ! Component: 1350 - total flux cleaned = 0.0170149 Jy ! Component: 1400 - total flux cleaned = 0.0174801 Jy ! Component: 1450 - total flux cleaned = 0.0178209 Jy ! Component: 1500 - total flux cleaned = 0.0178208 Jy ! Component: 1550 - total flux cleaned = 0.0181511 Jy ! Component: 1600 - total flux cleaned = 0.0183662 Jy ! Component: 1650 - total flux cleaned = 0.0183123 Jy ! Component: 1700 - total flux cleaned = 0.0184699 Jy ! Component: 1750 - total flux cleaned = 0.0184706 Jy ! Component: 1800 - total flux cleaned = 0.0186225 Jy ! Component: 1850 - total flux cleaned = 0.0186712 Jy ! Component: 1900 - total flux cleaned = 0.01867 Jy ! Component: 1950 - total flux cleaned = 0.0186203 Jy ! Component: 2000 - total flux cleaned = 0.0187149 Jy ! Component: 2050 - total flux cleaned = 0.0187603 Jy ! Component: 2100 - total flux cleaned = 0.0186209 Jy ! Component: 2150 - total flux cleaned = 0.0185291 Jy ! Component: 2200 - total flux cleaned = 0.0184834 Jy ! Component: 2250 - total flux cleaned = 0.0182164 Jy ! Component: 2300 - total flux cleaned = 0.0181286 Jy ! Component: 2350 - total flux cleaned = 0.0179978 Jy ! Component: 2400 - total flux cleaned = 0.0177835 Jy ! Component: 2450 - total flux cleaned = 0.0176146 Jy ! Component: 2500 - total flux cleaned = 0.017447 Jy ! Component: 2550 - total flux cleaned = 0.0173645 Jy ! Component: 2600 - total flux cleaned = 0.0172825 Jy ! Component: 2650 - total flux cleaned = 0.017201 Jy ! Component: 2700 - total flux cleaned = 0.01708 Jy ! Component: 2750 - total flux cleaned = 0.0169998 Jy ! Component: 2800 - total flux cleaned = 0.0168411 Jy ! Component: 2850 - total flux cleaned = 0.0168412 Jy ! Component: 2900 - total flux cleaned = 0.0167628 Jy ! Component: 2950 - total flux cleaned = 0.0166078 Jy ! Component: 3000 - total flux cleaned = 0.0165312 Jy ! Component: 3050 - total flux cleaned = 0.0164548 Jy ! Component: 3100 - total flux cleaned = 0.0162636 Jy ! Component: 3150 - total flux cleaned = 0.0159976 Jy ! Component: 3200 - total flux cleaned = 0.0158461 Jy ! Component: 3250 - total flux cleaned = 0.0155447 Jy ! Component: 3300 - total flux cleaned = 0.0154322 Jy ! Component: 3350 - total flux cleaned = 0.015208 Jy ! Component: 3400 - total flux cleaned = 0.0150216 Jy ! Component: 3450 - total flux cleaned = 0.0148359 Jy ! Component: 3500 - total flux cleaned = 0.0146875 Jy ! Component: 3550 - total flux cleaned = 0.0144287 Jy ! Component: 3600 - total flux cleaned = 0.0142441 Jy ! Component: 3650 - total flux cleaned = 0.013986 Jy ! Component: 3700 - total flux cleaned = 0.0139493 Jy ! Component: 3750 - total flux cleaned = 0.0138022 Jy ! Component: 3800 - total flux cleaned = 0.0136185 Jy ! Component: 3850 - total flux cleaned = 0.0134715 Jy ! Component: 3900 - total flux cleaned = 0.0133614 Jy ! Component: 3950 - total flux cleaned = 0.0132148 Jy ! Component: 4000 - total flux cleaned = 0.013068 Jy ! Component: 4050 - total flux cleaned = 0.0129578 Jy ! Total flux subtracted in 4096 components = 0.012811 Jy ! Clean residual min=-0.002067 max=0.002206 Jy/beam ! Clean residual mean=0.000018 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.610993 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 330 components and 0.610993 Jy ![Exited script file: muppet] wmap "J1041-4740_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 9.381 at -12.56 degrees (North through East) ! Clean map min=-0.012863 max=0.37492 Jy/beam ! Writing clean map to FITS file: J1041-4740_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.374916 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000894441 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.715714 0.715714 1.43143 2.86286 5.72571 11.4514 22.9028 45.8057 91.6114 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.374 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 9.381 at -12.56 degrees (North through East) ! Clean map min=-0.012863 max=0.37492 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1041-4740_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:33:42 2019