! Started logfile: J1041+523A_S_2017_03_23_pus_uvs.log on Mon May 13 09:56:42 2019 obs J1041+523A_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1041+523A_S_2017_03_23_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6375 visibilities/baseline/integration-bin. ! Found source: J1041+523A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1836 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1041+523A_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.452058Jy sigma=0.004371 ! Fit after self-cal, rms=0.444903Jy sigma=0.004306 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.513 mas, bmaj=6.643 mas, bpa=21.63 degrees ! Estimated noise=2164.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.435416 Jy ! Component: 100 - total flux cleaned = 0.530374 Jy ! Total flux subtracted in 100 components = 0.530374 Jy ! Clean residual min=-0.027254 max=0.026674 Jy/beam ! Clean residual mean=-0.000053 rms=0.005795 Jy/beam ! Combined flux in latest and established models = 0.530374 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.530374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131654Jy sigma=0.001135 ! Fit after self-cal, rms=0.131657Jy sigma=0.001135 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.922 mas, bmaj=7.258 mas, bpa=21.16 degrees ! Estimated noise=1927.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331969 Jy ! Component: 100 - total flux cleaned = 0.0502665 Jy ! Component: 150 - total flux cleaned = 0.0618024 Jy ! Component: 200 - total flux cleaned = 0.0697475 Jy ! Total flux subtracted in 200 components = 0.0697475 Jy ! Clean residual min=-0.021921 max=0.017521 Jy/beam ! Clean residual mean=-0.000039 rms=0.004532 Jy/beam ! Combined flux in latest and established models = 0.600121 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.600121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120941Jy sigma=0.001063 ! Fit after self-cal, rms=0.120918Jy sigma=0.001063 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.99 KP 1.04 ! LA 1.00 MK 1.01 NL 0.86 OV 1.03 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 0.99 KP 0.98 ! LA 0.97 MK 1.00 NL 0.99 OV 1.03 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.07 HN 1.01 KP 0.87 ! LA 0.76 MK 1.03 NL 1.11 OV 0.95 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.09 HN 1.00 KP 1.00* ! LA 0.81 MK 1.24 NL 1.00* OV 1.93 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.120918Jy sigma=0.001063 ! Fit after self-cal, rms=0.079613Jy sigma=0.000701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=7.264 mas, bpa=21.03 degrees ! Estimated noise=1919.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105845 Jy ! Component: 100 - total flux cleaned = -0.00220347 Jy ! Component: 150 - total flux cleaned = -0.00243095 Jy ! Component: 200 - total flux cleaned = -0.00243985 Jy ! Total flux subtracted in 200 components = -0.00243985 Jy ! Clean residual min=-0.007105 max=0.008703 Jy/beam ! Clean residual mean=0.000007 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 0.597681 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.597681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079048Jy sigma=0.000696 ! Fit after self-cal, rms=0.079087Jy sigma=0.000695 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079087Jy sigma=0.000695 ! Fit after self-cal, rms=0.076202Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=7.268 mas, bpa=21.16 degrees ! Estimated noise=1921.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183097 Jy ! Component: 100 - total flux cleaned = -0.00210275 Jy ! Component: 150 - total flux cleaned = -0.00220971 Jy ! Component: 200 - total flux cleaned = -0.0022482 Jy ! Total flux subtracted in 200 components = -0.0022482 Jy ! Clean residual min=-0.005682 max=0.007158 Jy/beam ! Clean residual mean=0.000012 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.595433 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.595433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076093Jy sigma=0.000678 ! Fit after self-cal, rms=0.076099Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, 37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701141 Jy ! Component: 100 - total flux cleaned = 0.010881 Jy ! Component: 150 - total flux cleaned = 0.0136489 Jy ! Component: 200 - total flux cleaned = 0.0158311 Jy ! Total flux subtracted in 200 components = 0.0158311 Jy ! Clean residual min=-0.005105 max=0.005298 Jy/beam ! Clean residual mean=0.000013 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.611264 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 78 components and 0.611264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075437Jy sigma=0.000671 ! Fit after self-cal, rms=0.075405Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075405Jy sigma=0.000671 ! Fit after self-cal, rms=0.075305Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=7.269 mas, bpa=21.17 degrees ! Estimated noise=1920.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281315 Jy ! Component: 100 - total flux cleaned = 0.00405221 Jy ! Component: 150 - total flux cleaned = 0.00477528 Jy ! Component: 200 - total flux cleaned = 0.00514543 Jy ! Total flux subtracted in 200 components = 0.00514543 Jy ! Clean residual min=-0.004861 max=0.004894 Jy/beam ! Clean residual mean=0.000014 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.61641 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 102 components and 0.61641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075169Jy sigma=0.000669 ! Fit after self-cal, rms=0.075163Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000664425 Jy ! Component: 100 - total flux cleaned = 0.000941617 Jy ! Component: 150 - total flux cleaned = 0.00106962 Jy ! Component: 200 - total flux cleaned = 0.00118787 Jy ! Total flux subtracted in 200 components = 0.00118787 Jy ! Clean residual min=-0.004843 max=0.004995 Jy/beam ! Clean residual mean=0.000014 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.617598 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 115 components and 0.617598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075112Jy sigma=0.000668 ! Fit after self-cal, rms=0.075114Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075114Jy sigma=0.000668 ! Fit after self-cal, rms=0.075146Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.147 mas, bmaj=9.415 mas, bpa=18.82 degrees ! Estimated noise=2234.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391863 Jy ! Component: 100 - total flux cleaned = 0.000698225 Jy ! Component: 150 - total flux cleaned = 0.00101733 Jy ! Component: 200 - total flux cleaned = 0.00116017 Jy ! Total flux subtracted in 200 components = 0.00116017 Jy ! Clean residual min=-0.005121 max=0.005583 Jy/beam ! Clean residual mean=0.000024 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.618758 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.618758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075108Jy sigma=0.000668 ! Fit after self-cal, rms=0.075105Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.13129e-06 Jy ! Component: 100 - total flux cleaned = 0.00013247 Jy ! Component: 150 - total flux cleaned = 0.000223274 Jy ! Component: 200 - total flux cleaned = 0.000249797 Jy ! Total flux subtracted in 200 components = 0.000249797 Jy ! Clean residual min=-0.005244 max=0.005632 Jy/beam ! Clean residual mean=0.000024 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.619008 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 0.619007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075094Jy sigma=0.000667 ! Fit after self-cal, rms=0.075097Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=7.272 mas, bpa=21.19 degrees ! Estimated noise=1920.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.94 x 7.272 at 21.19 degrees (North through East) ! Clean map min=-0.0047293 max=0.5587 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075097Jy sigma=0.000667 ! Fit after self-cal, rms=0.069683Jy sigma=0.000609 ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=7.275 mas, bpa=21.19 degrees ! Estimated noise=1921.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.05323e-05 Jy ! Component: 100 - total flux cleaned = -9.00662e-05 Jy ! Component: 150 - total flux cleaned = -9.03782e-05 Jy ! Component: 200 - total flux cleaned = -0.000158139 Jy ! Total flux subtracted in 200 components = -0.000158139 Jy ! Clean residual min=-0.004953 max=0.005049 Jy/beam ! Clean residual mean=0.000014 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.618849 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 157 components and 0.618849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069645Jy sigma=0.000609 ! Fit after self-cal, rms=0.069643Jy sigma=0.000609 ! Inverting map ! Added new window around map position (-67.5, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246151 Jy ! Component: 100 - total flux cleaned = 0.00198191 Jy ! Component: 150 - total flux cleaned = 0.00206258 Jy ! Component: 200 - total flux cleaned = 0.00213632 Jy ! Total flux subtracted in 200 components = 0.00213632 Jy ! Clean residual min=-0.004555 max=0.004503 Jy/beam ! Clean residual mean=0.000010 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.620986 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 179 components and 0.620986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069244Jy sigma=0.000605 ! Fit after self-cal, rms=0.069228Jy sigma=0.000605 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069228Jy sigma=0.000605 ! Fit after self-cal, rms=0.069247Jy sigma=0.000605 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=6.625 mas, bpa=21.63 degrees ! Estimated noise=2185.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.439074 Jy ! Component: 100 - total flux cleaned = 0.535042 Jy ! Component: 150 - total flux cleaned = 0.562077 Jy ! Component: 200 - total flux cleaned = 0.573797 Jy ! Total flux subtracted in 200 components = 0.573797 Jy ! Clean residual min=-0.006431 max=0.006402 Jy/beam ! Clean residual mean=-0.000001 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.573797 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.573797 Jy ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=7.277 mas, bpa=21.2 degrees ! Estimated noise=1921.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00914897 Jy ! Component: 100 - total flux cleaned = 0.0158024 Jy ! Component: 150 - total flux cleaned = 0.0203592 Jy ! Component: 200 - total flux cleaned = 0.0235191 Jy ! Total flux subtracted in 200 components = 0.0235191 Jy ! Clean residual min=-0.005011 max=0.004745 Jy/beam ! Clean residual mean=0.000000 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.597316 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 61 components and 0.597316 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.155 mas, bmaj=9.421 mas, bpa=18.84 degrees ! Estimated noise=2233.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00515125 Jy ! Component: 100 - total flux cleaned = 0.00888573 Jy ! Component: 150 - total flux cleaned = 0.0108457 Jy ! Component: 200 - total flux cleaned = 0.0124343 Jy ! Total flux subtracted in 200 components = 0.0124343 Jy ! Clean residual min=-0.004771 max=0.005062 Jy/beam ! Clean residual mean=0.000006 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.60975 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168733 Jy ! Component: 100 - total flux cleaned = 0.00296262 Jy ! Component: 150 - total flux cleaned = 0.0041293 Jy ! Component: 200 - total flux cleaned = 0.00512562 Jy ! Total flux subtracted in 200 components = 0.00512562 Jy ! Clean residual min=-0.004452 max=0.005020 Jy/beam ! Clean residual mean=0.000008 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.614875 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 122 components and 0.614875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=7.277 mas, bpa=21.2 degrees ! Estimated noise=1921.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000783214 Jy ! Component: 100 - total flux cleaned = 0.000150141 Jy ! Component: 150 - total flux cleaned = 0.000795166 Jy ! Component: 200 - total flux cleaned = 0.00137312 Jy ! Total flux subtracted in 200 components = 0.00137312 Jy ! Clean residual min=-0.004274 max=0.004105 Jy/beam ! Clean residual mean=0.000006 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.616248 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 138 components and 0.616249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069285Jy sigma=0.000605 ! Fit after self-cal, rms=0.069280Jy sigma=0.000605 wmodel J1041+523A_S_2017_03_23_pus_map.mod ! Writing 138 model components to file: J1041+523A_S_2017_03_23_pus_map.mod wobs J1041+523A_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1041+523A_S_2017_03_23_pus_uvs.fits wwins J1041+523A_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J1041+523A_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304066 Jy ! Component: 100 - total flux cleaned = 0.000656756 Jy ! Component: 150 - total flux cleaned = 0.00111335 Jy ! Component: 200 - total flux cleaned = 0.00154903 Jy ! Component: 250 - total flux cleaned = 0.00220389 Jy ! Component: 300 - total flux cleaned = 0.00266036 Jy ! Component: 350 - total flux cleaned = 0.00293514 Jy ! Component: 400 - total flux cleaned = 0.00309525 Jy ! Component: 450 - total flux cleaned = 0.00330305 Jy ! Component: 500 - total flux cleaned = 0.00355529 Jy ! Component: 550 - total flux cleaned = 0.00365223 Jy ! Component: 600 - total flux cleaned = 0.00374866 Jy ! Component: 650 - total flux cleaned = 0.00389104 Jy ! Component: 700 - total flux cleaned = 0.00407548 Jy ! Component: 750 - total flux cleaned = 0.00425508 Jy ! Component: 800 - total flux cleaned = 0.00425535 Jy ! Component: 850 - total flux cleaned = 0.00434235 Jy ! Component: 900 - total flux cleaned = 0.00451303 Jy ! Component: 950 - total flux cleaned = 0.00455488 Jy ! Component: 1000 - total flux cleaned = 0.0047179 Jy ! Component: 1050 - total flux cleaned = 0.00479856 Jy ! Component: 1100 - total flux cleaned = 0.00483888 Jy ! Component: 1150 - total flux cleaned = 0.00483951 Jy ! Component: 1200 - total flux cleaned = 0.00506884 Jy ! Component: 1250 - total flux cleaned = 0.00510555 Jy ! Component: 1300 - total flux cleaned = 0.00514223 Jy ! Component: 1350 - total flux cleaned = 0.00532486 Jy ! Component: 1400 - total flux cleaned = 0.00539673 Jy ! Component: 1450 - total flux cleaned = 0.00543262 Jy ! Component: 1500 - total flux cleaned = 0.00560689 Jy ! Component: 1550 - total flux cleaned = 0.0056763 Jy ! Component: 1600 - total flux cleaned = 0.00577788 Jy ! Component: 1650 - total flux cleaned = 0.00577832 Jy ! Component: 1700 - total flux cleaned = 0.00591089 Jy ! Component: 1750 - total flux cleaned = 0.00597586 Jy ! Component: 1800 - total flux cleaned = 0.00597601 Jy ! Component: 1850 - total flux cleaned = 0.00619867 Jy ! Component: 1900 - total flux cleaned = 0.00616777 Jy ! Component: 1950 - total flux cleaned = 0.0063231 Jy ! Component: 2000 - total flux cleaned = 0.00647655 Jy ! Component: 2050 - total flux cleaned = 0.0065374 Jy ! Component: 2100 - total flux cleaned = 0.00656781 Jy ! Component: 2150 - total flux cleaned = 0.0067761 Jy ! Component: 2200 - total flux cleaned = 0.0068349 Jy ! Component: 2250 - total flux cleaned = 0.00698042 Jy ! Component: 2300 - total flux cleaned = 0.00703794 Jy ! Component: 2350 - total flux cleaned = 0.00715215 Jy ! Component: 2400 - total flux cleaned = 0.00732267 Jy ! Component: 2450 - total flux cleaned = 0.00757569 Jy ! Component: 2500 - total flux cleaned = 0.00754784 Jy ! Component: 2550 - total flux cleaned = 0.00779731 Jy ! Component: 2600 - total flux cleaned = 0.00796209 Jy ! Component: 2650 - total flux cleaned = 0.00801675 Jy ! Component: 2700 - total flux cleaned = 0.00820589 Jy ! Component: 2750 - total flux cleaned = 0.00825934 Jy ! Component: 2800 - total flux cleaned = 0.00833889 Jy ! Component: 2850 - total flux cleaned = 0.00847085 Jy ! Component: 2900 - total flux cleaned = 0.00847115 Jy ! Component: 2950 - total flux cleaned = 0.00865326 Jy ! Component: 3000 - total flux cleaned = 0.00867945 Jy ! Component: 3050 - total flux cleaned = 0.00878175 Jy ! Component: 3100 - total flux cleaned = 0.0088833 Jy ! Component: 3150 - total flux cleaned = 0.00890858 Jy ! Component: 3200 - total flux cleaned = 0.00898352 Jy ! Component: 3250 - total flux cleaned = 0.00900827 Jy ! Component: 3300 - total flux cleaned = 0.00900853 Jy ! Component: 3350 - total flux cleaned = 0.00903309 Jy ! Component: 3400 - total flux cleaned = 0.00903334 Jy ! Component: 3450 - total flux cleaned = 0.00908168 Jy ! Component: 3500 - total flux cleaned = 0.00915399 Jy ! Component: 3550 - total flux cleaned = 0.00910616 Jy ! Component: 3600 - total flux cleaned = 0.00905872 Jy ! Component: 3650 - total flux cleaned = 0.00915339 Jy ! Component: 3700 - total flux cleaned = 0.00920015 Jy ! Component: 3750 - total flux cleaned = 0.00927025 Jy ! Component: 3800 - total flux cleaned = 0.00938636 Jy ! Component: 3850 - total flux cleaned = 0.0093402 Jy ! Component: 3900 - total flux cleaned = 0.00940918 Jy ! Component: 3950 - total flux cleaned = 0.00947745 Jy ! Component: 4000 - total flux cleaned = 0.00956801 Jy ! Component: 4050 - total flux cleaned = 0.00961289 Jy ! Total flux subtracted in 4096 components = 0.00968001 Jy ! Clean residual min=-0.001414 max=0.001517 Jy/beam ! Clean residual mean=0.000003 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.625929 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 416 components and 0.625929 Jy ![Exited script file: muppet] wmap "J1041+523A_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.943 x 7.277 at 21.2 degrees (North through East) ! Clean map min=-0.0025293 max=0.55984 Jy/beam ! Writing clean map to FITS file: J1041+523A_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.559838 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000388686 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.208285 0.208285 0.41657 0.83314 1.66628 3.33256 6.66512 13.3302 26.6605 53.321 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.559 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.943 x 7.277 at 21.2 degrees (North through East) ! Clean map min=-0.0025293 max=0.55984 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1041+523A_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:56:47 2019