! Started logfile: J1038-4325_S_2017_04_28_pus_uvs.log on Thu May 2 16:23:04 2019 obs J1038-4325_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1038-4325_S_2017_04_28_pus_uva.fits ! AN table 1: 136 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.536765 visibilities/baseline/integration-bin. ! Found source: J1038-4325 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13140 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1038-4325_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 384 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 388 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1020 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.679483Jy sigma=0.019668 ! Fit after self-cal, rms=0.669562Jy sigma=0.019669 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.368 mas, bmaj=6.189 mas, bpa=-14.09 degrees ! Estimated noise=1588.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197965 Jy ! Component: 100 - total flux cleaned = 0.277914 Jy ! Total flux subtracted in 100 components = 0.277914 Jy ! Clean residual min=-0.052302 max=0.056828 Jy/beam ! Clean residual mean=0.000041 rms=0.017602 Jy/beam ! Combined flux in latest and established models = 0.277914 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.277914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191051Jy sigma=0.005034 ! Fit after self-cal, rms=0.190972Jy sigma=0.005033 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=8.161 mas, bpa=-6.439 degrees ! Estimated noise=1034.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400369 Jy ! Component: 100 - total flux cleaned = -0.00139494 Jy ! Component: 150 - total flux cleaned = -0.00344619 Jy ! Component: 200 - total flux cleaned = -0.00446544 Jy ! Total flux subtracted in 200 components = -0.00446544 Jy ! Clean residual min=-0.062394 max=0.068462 Jy/beam ! Clean residual mean=0.000269 rms=0.023605 Jy/beam ! Combined flux in latest and established models = 0.273448 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.273448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183388Jy sigma=0.004960 ! Fit after self-cal, rms=0.183237Jy sigma=0.004960 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 1.00* KP 0.80 ! LA 0.76 MK 0.93 NL 1.21 OV 0.81 ! PT 0.86 SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.75 HN 1.00* KP 0.76 ! LA 0.73 MK 0.94 NL 1.29 OV 0.87 ! PT 0.84 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 1.00* KP 0.80 ! LA 0.75 MK 0.98 NL 1.24 OV 0.82 ! PT 0.84 SC 1.15 ! ! ! Correcting IF 4. ! A total of 252 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 5.16 HN 1.00* KP 1.00* ! LA 5.85 MK 3.09 NL 1.00* OV 1.00* ! PT 5.70 SC 1.00* ! ! ! Fit before self-cal, rms=0.183237Jy sigma=0.004960 ! Fit after self-cal, rms=0.628101Jy sigma=0.000702 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=8.441 mas, bpa=-3.222 degrees ! Estimated noise=1048.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372724 Jy ! Component: 100 - total flux cleaned = 0.00392185 Jy ! Component: 150 - total flux cleaned = 0.00408446 Jy ! Component: 200 - total flux cleaned = 0.00408813 Jy ! Total flux subtracted in 200 components = 0.00408813 Jy ! Clean residual min=-0.003587 max=0.004726 Jy/beam ! Clean residual mean=-0.000015 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.277536 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.277537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.627683Jy sigma=0.000698 ! Fit after self-cal, rms=0.627758Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.627758Jy sigma=0.000696 ! Fit after self-cal, rms=0.125508Jy sigma=0.000689 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.166 mas, bmaj=8.421 mas, bpa=-3.5 degrees ! Estimated noise=1040.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000452002 Jy ! Component: 100 - total flux cleaned = 0.000564343 Jy ! Component: 150 - total flux cleaned = 0.000563157 Jy ! Component: 200 - total flux cleaned = 0.000562485 Jy ! Total flux subtracted in 200 components = 0.000562485 Jy ! Clean residual min=-0.002940 max=0.003542 Jy/beam ! Clean residual mean=0.000003 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.278099 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.278099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125272Jy sigma=0.000688 ! Fit after self-cal, rms=0.124712Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.5, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239791 Jy ! Component: 100 - total flux cleaned = 0.00239844 Jy ! Component: 150 - total flux cleaned = 0.00239988 Jy ! Component: 200 - total flux cleaned = 0.002401 Jy ! Total flux subtracted in 200 components = 0.002401 Jy ! Clean residual min=-0.002620 max=0.002671 Jy/beam ! Clean residual mean=0.000019 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.2805 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.2805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124543Jy sigma=0.000684 ! Fit after self-cal, rms=0.124546Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124546Jy sigma=0.000684 ! Fit after self-cal, rms=0.122847Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=8.359 mas, bpa=-3.819 degrees ! Estimated noise=1035.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433883 Jy ! Component: 100 - total flux cleaned = 0.000336012 Jy ! Component: 150 - total flux cleaned = 0.000244668 Jy ! Component: 200 - total flux cleaned = 0.000158938 Jy ! Total flux subtracted in 200 components = 0.000158938 Jy ! Clean residual min=-0.002239 max=0.002586 Jy/beam ! Clean residual mean=0.000004 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.280659 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.280659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122781Jy sigma=0.000682 ! Fit after self-cal, rms=0.122778Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125711 Jy ! Component: 100 - total flux cleaned = 4.74571e-05 Jy ! Component: 150 - total flux cleaned = 4.86629e-05 Jy ! Component: 200 - total flux cleaned = 4.9469e-05 Jy ! Total flux subtracted in 200 components = 4.9469e-05 Jy ! Clean residual min=-0.002205 max=0.002526 Jy/beam ! Clean residual mean=0.000004 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.280708 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.280708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122733Jy sigma=0.000681 ! Fit after self-cal, rms=0.122726Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122726Jy sigma=0.000681 ! Fit after self-cal, rms=0.122566Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.33 mas, bmaj=33.16 mas, bpa=-1.925 degrees ! Estimated noise=1212.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246812 Jy ! Component: 100 - total flux cleaned = 0.000226572 Jy ! Component: 150 - total flux cleaned = 0.00018699 Jy ! Component: 200 - total flux cleaned = 0.000168167 Jy ! Total flux subtracted in 200 components = 0.000168167 Jy ! Clean residual min=-0.001484 max=0.001969 Jy/beam ! Clean residual mean=0.000010 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.280876 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.280876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122548Jy sigma=0.000681 ! Fit after self-cal, rms=0.122540Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.67972e-05 Jy ! Component: 100 - total flux cleaned = 2.90139e-05 Jy ! Component: 150 - total flux cleaned = -5.26044e-06 Jy ! Component: 200 - total flux cleaned = -2.15061e-05 Jy ! Total flux subtracted in 200 components = -2.15061e-05 Jy ! Clean residual min=-0.001489 max=0.001953 Jy/beam ! Clean residual mean=0.000010 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.280855 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.280855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122529Jy sigma=0.000681 ! Fit after self-cal, rms=0.122523Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.357 mas, bpa=-3.863 degrees ! Estimated noise=1036.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.357 at -3.863 degrees (North through East) ! Clean map min=-0.005088 max=0.26868 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=6.542 mas, bpa=-6.967 degrees ! Estimated noise=1779.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20158 Jy ! Component: 100 - total flux cleaned = 0.2652 Jy ! Component: 150 - total flux cleaned = 0.271885 Jy ! Component: 200 - total flux cleaned = 0.273556 Jy ! Total flux subtracted in 200 components = 0.273556 Jy ! Clean residual min=-0.011044 max=0.010616 Jy/beam ! Clean residual mean=-0.000031 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 0.273556 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.273556 Jy ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.357 mas, bpa=-3.863 degrees ! Estimated noise=1036.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321027 Jy ! Component: 100 - total flux cleaned = 0.00416788 Jy ! Component: 150 - total flux cleaned = 0.00516604 Jy ! Component: 200 - total flux cleaned = 0.00577317 Jy ! Total flux subtracted in 200 components = 0.00577317 Jy ! Clean residual min=-0.003812 max=0.003825 Jy/beam ! Clean residual mean=-0.000007 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.279329 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 22 components and 0.279329 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.33 mas, bmaj=33.16 mas, bpa=-1.925 degrees ! Estimated noise=1212.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157043 Jy ! Component: 100 - total flux cleaned = 0.00165854 Jy ! Component: 150 - total flux cleaned = 0.00169623 Jy ! Component: 200 - total flux cleaned = 0.0016616 Jy ! Total flux subtracted in 200 components = 0.0016616 Jy ! Clean residual min=-0.001803 max=0.002052 Jy/beam ! Clean residual mean=0.000012 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.280991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.21715e-05 Jy ! Component: 100 - total flux cleaned = -6.42951e-05 Jy ! Component: 150 - total flux cleaned = -9.41376e-05 Jy ! Component: 200 - total flux cleaned = -0.00012299 Jy ! Total flux subtracted in 200 components = -0.00012299 Jy ! Clean residual min=-0.001762 max=0.002029 Jy/beam ! Clean residual mean=0.000011 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.280868 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.280868 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.357 mas, bpa=-3.863 degrees ! Estimated noise=1036.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159937 Jy ! Component: 100 - total flux cleaned = 0.000274687 Jy ! Component: 150 - total flux cleaned = 0.000484168 Jy ! Component: 200 - total flux cleaned = 0.000663737 Jy ! Total flux subtracted in 200 components = 0.000663737 Jy ! Clean residual min=-0.002927 max=0.003143 Jy/beam ! Clean residual mean=0.000011 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.281532 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 56 components and 0.281532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122753Jy sigma=0.000682 ! Fit after self-cal, rms=0.122778Jy sigma=0.000682 wmodel J1038-4325_S_2017_04_28_pus_map.mod ! Writing 56 model components to file: J1038-4325_S_2017_04_28_pus_map.mod wobs J1038-4325_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1038-4325_S_2017_04_28_pus_uvs.fits wwins J1038-4325_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J1038-4325_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000767488 Jy ! Component: 100 - total flux cleaned = -0.00118891 Jy ! Component: 150 - total flux cleaned = -0.00158395 Jy ! Component: 200 - total flux cleaned = -0.00196046 Jy ! Component: 250 - total flux cleaned = -0.00235809 Jy ! Component: 300 - total flux cleaned = -0.00258731 Jy ! Component: 350 - total flux cleaned = -0.00273585 Jy ! Component: 400 - total flux cleaned = -0.00295105 Jy ! Component: 450 - total flux cleaned = -0.003124 Jy ! Component: 500 - total flux cleaned = -0.00339368 Jy ! Component: 550 - total flux cleaned = -0.00362284 Jy ! Component: 600 - total flux cleaned = -0.00384705 Jy ! Component: 650 - total flux cleaned = -0.00416044 Jy ! Component: 700 - total flux cleaned = -0.00443616 Jy ! Component: 750 - total flux cleaned = -0.00467617 Jy ! Component: 800 - total flux cleaned = -0.00496966 Jy ! Component: 850 - total flux cleaned = -0.00534317 Jy ! Component: 900 - total flux cleaned = -0.00556843 Jy ! Component: 950 - total flux cleaned = -0.00581747 Jy ! Component: 1000 - total flux cleaned = -0.0060625 Jy ! Component: 1050 - total flux cleaned = -0.00630347 Jy ! Component: 1100 - total flux cleaned = -0.00656607 Jy ! Component: 1150 - total flux cleaned = -0.00682431 Jy ! Component: 1200 - total flux cleaned = -0.00710357 Jy ! Component: 1250 - total flux cleaned = -0.00735315 Jy ! Component: 1300 - total flux cleaned = -0.00759895 Jy ! Component: 1350 - total flux cleaned = -0.00786451 Jy ! Component: 1400 - total flux cleaned = -0.00812567 Jy ! Component: 1450 - total flux cleaned = -0.0084296 Jy ! Component: 1500 - total flux cleaned = -0.0086139 Jy ! Component: 1550 - total flux cleaned = -0.00884106 Jy ! Component: 1600 - total flux cleaned = -0.00904235 Jy ! Component: 1650 - total flux cleaned = -0.00930761 Jy ! Component: 1700 - total flux cleaned = -0.00961258 Jy ! Component: 1750 - total flux cleaned = -0.00984858 Jy ! Component: 1800 - total flux cleaned = -0.010018 Jy ! Component: 1850 - total flux cleaned = -0.0102065 Jy ! Component: 1900 - total flux cleaned = -0.0104751 Jy ! Component: 1950 - total flux cleaned = -0.0106589 Jy ! Component: 2000 - total flux cleaned = -0.0108203 Jy ! Component: 2050 - total flux cleaned = -0.0110599 Jy ! Component: 2100 - total flux cleaned = -0.0112768 Jy ! Component: 2150 - total flux cleaned = -0.0115107 Jy ! Component: 2200 - total flux cleaned = -0.0117226 Jy ! Component: 2250 - total flux cleaned = -0.0119703 Jy ! Component: 2300 - total flux cleaned = -0.0121586 Jy ! Component: 2350 - total flux cleaned = -0.0123825 Jy ! Component: 2400 - total flux cleaned = -0.0125674 Jy ! Component: 2450 - total flux cleaned = -0.0128233 Jy ! Component: 2500 - total flux cleaned = -0.0130224 Jy ! Component: 2550 - total flux cleaned = -0.0132376 Jy ! Component: 2600 - total flux cleaned = -0.013451 Jy ! Component: 2650 - total flux cleaned = -0.0136626 Jy ! Component: 2700 - total flux cleaned = -0.0139073 Jy ! Component: 2750 - total flux cleaned = -0.0141325 Jy ! Component: 2800 - total flux cleaned = -0.014373 Jy ! Component: 2850 - total flux cleaned = -0.0145771 Jy ! Component: 2900 - total flux cleaned = -0.0148135 Jy ! Component: 2950 - total flux cleaned = -0.0150144 Jy ! Component: 3000 - total flux cleaned = -0.0151805 Jy ! Component: 3050 - total flux cleaned = -0.0154113 Jy ! Component: 3100 - total flux cleaned = -0.0156075 Jy ! Component: 3150 - total flux cleaned = -0.0157862 Jy ! Component: 3200 - total flux cleaned = -0.0159315 Jy ! Component: 3250 - total flux cleaned = -0.0160918 Jy ! Component: 3300 - total flux cleaned = -0.0162825 Jy ! Component: 3350 - total flux cleaned = -0.0164247 Jy ! Component: 3400 - total flux cleaned = -0.0165973 Jy ! Component: 3450 - total flux cleaned = -0.0167221 Jy ! Component: 3500 - total flux cleaned = -0.0168615 Jy ! Component: 3550 - total flux cleaned = -0.017 Jy ! Component: 3600 - total flux cleaned = -0.0171072 Jy ! Component: 3650 - total flux cleaned = -0.0172444 Jy ! Component: 3700 - total flux cleaned = -0.0173201 Jy ! Component: 3750 - total flux cleaned = -0.0174409 Jy ! Component: 3800 - total flux cleaned = -0.0175761 Jy ! Component: 3850 - total flux cleaned = -0.0176808 Jy ! Component: 3900 - total flux cleaned = -0.0177255 Jy ! Component: 3950 - total flux cleaned = -0.0178145 Jy ! Component: 4000 - total flux cleaned = -0.0179328 Jy ! Component: 4050 - total flux cleaned = -0.0180211 Jy ! Total flux subtracted in 4096 components = -0.0181384 Jy ! Clean residual min=-0.000828 max=0.000900 Jy/beam ! Clean residual mean=-0.000007 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.263393 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 277 components and 0.263393 Jy ![Exited script file: muppet] wmap "J1038-4325_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.357 at -3.863 degrees (North through East) ! Clean map min=-0.0041992 max=0.26597 Jy/beam ! Writing clean map to FITS file: J1038-4325_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.265969 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259647 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.292868 0.292868 0.585737 1.17147 2.34295 4.6859 9.37179 18.7436 37.4872 74.9743 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.265 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.357 at -3.863 degrees (North through East) ! Clean map min=-0.0041992 max=0.26597 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1038-4325_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:23:09 2019