! Started logfile: J1037-2934_S_2017_10_09_pus_uvs.log on Sun May 12 13:10:08 2019 obs J1037-2934_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2017_10_09_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.527778 visibilities/baseline/integration-bin. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.643961Jy sigma=0.004103 ! Fit after self-cal, rms=0.536862Jy sigma=0.003441 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=18.34 mas, bpa=-19.84 degrees ! Estimated noise=3387.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.765484 Jy ! Component: 100 - total flux cleaned = 1.07174 Jy ! Total flux subtracted in 100 components = 1.07174 Jy ! Clean residual min=-0.070406 max=0.143045 Jy/beam ! Clean residual mean=0.000693 rms=0.028051 Jy/beam ! Combined flux in latest and established models = 1.07174 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 1.07174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.437463Jy sigma=0.002653 ! Fit after self-cal, rms=0.437375Jy sigma=0.002652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=20.93 mas, bpa=-20.29 degrees ! Estimated noise=2901.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.255045 Jy ! Component: 100 - total flux cleaned = 0.396019 Jy ! Component: 150 - total flux cleaned = 0.484196 Jy ! Component: 200 - total flux cleaned = 0.541651 Jy ! Total flux subtracted in 200 components = 0.541651 Jy ! Clean residual min=-0.042840 max=0.049910 Jy/beam ! Clean residual mean=0.000101 rms=0.012788 Jy/beam ! Combined flux in latest and established models = 1.61339 Jy ! Performing phase self-cal ! Adding 89 model components to the UV plane model. ! The established model now contains 124 components and 1.61339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228772Jy sigma=0.001297 ! Fit after self-cal, rms=0.228672Jy sigma=0.001297 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.94 HN 1.12 KP 1.08 ! LA 1.02 MK 1.04 NL 0.93 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.19 KP 1.01 ! LA 0.97 MK 1.03 NL 0.91 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.13 KP 0.88 ! LA 0.76 MK 1.04 NL 1.22 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 0.95 KP 1.00* ! LA 1.00* MK 1.06 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.228672Jy sigma=0.001297 ! Fit after self-cal, rms=0.140315Jy sigma=0.000826 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.351 mas, bmaj=21.47 mas, bpa=-20.53 degrees ! Estimated noise=2966.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00785061 Jy ! Component: 100 - total flux cleaned = -0.00648481 Jy ! Component: 150 - total flux cleaned = -0.00571195 Jy ! Component: 200 - total flux cleaned = -0.00503963 Jy ! Total flux subtracted in 200 components = -0.00503963 Jy ! Clean residual min=-0.034280 max=0.023612 Jy/beam ! Clean residual mean=0.000037 rms=0.007630 Jy/beam ! Combined flux in latest and established models = 1.60835 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 148 components and 1.60835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137527Jy sigma=0.000810 ! Fit after self-cal, rms=0.137552Jy sigma=0.000810 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137552Jy sigma=0.000810 ! Fit after self-cal, rms=0.126982Jy sigma=0.000743 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=21.76 mas, bpa=-20.67 degrees ! Estimated noise=2989.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00811157 Jy ! Component: 100 - total flux cleaned = -0.00871622 Jy ! Component: 150 - total flux cleaned = -0.00952633 Jy ! Component: 200 - total flux cleaned = -0.00953602 Jy ! Total flux subtracted in 200 components = -0.00953602 Jy ! Clean residual min=-0.023934 max=0.019011 Jy/beam ! Clean residual mean=0.000047 rms=0.004817 Jy/beam ! Combined flux in latest and established models = 1.59881 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 174 components and 1.59881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125323Jy sigma=0.000733 ! Fit after self-cal, rms=0.125302Jy sigma=0.000733 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.52404e-05 Jy ! Component: 100 - total flux cleaned = -0.00016079 Jy ! Component: 150 - total flux cleaned = -0.000161812 Jy ! Component: 200 - total flux cleaned = -0.000165335 Jy ! Total flux subtracted in 200 components = -0.000165335 Jy ! Clean residual min=-0.023461 max=0.017979 Jy/beam ! Clean residual mean=0.000045 rms=0.004750 Jy/beam ! Combined flux in latest and established models = 1.59865 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 187 components and 1.59865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124756Jy sigma=0.000730 ! Fit after self-cal, rms=0.124737Jy sigma=0.000730 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124737Jy sigma=0.000730 ! Fit after self-cal, rms=0.124704Jy sigma=0.000724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=21.96 mas, bpa=-20.79 degrees ! Estimated noise=3008.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00590539 Jy ! Component: 100 - total flux cleaned = -0.00727452 Jy ! Component: 150 - total flux cleaned = -0.0079808 Jy ! Component: 200 - total flux cleaned = -0.00798289 Jy ! Total flux subtracted in 200 components = -0.00798289 Jy ! Clean residual min=-0.021370 max=0.015943 Jy/beam ! Clean residual mean=0.000049 rms=0.004264 Jy/beam ! Combined flux in latest and established models = 1.59067 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 191 components and 1.59067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123557Jy sigma=0.000717 ! Fit after self-cal, rms=0.123569Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022472 Jy ! Component: 100 - total flux cleaned = -0.000399928 Jy ! Component: 150 - total flux cleaned = -0.000556964 Jy ! Component: 200 - total flux cleaned = -0.000561887 Jy ! Total flux subtracted in 200 components = -0.000561887 Jy ! Clean residual min=-0.020761 max=0.015370 Jy/beam ! Clean residual mean=0.000048 rms=0.004199 Jy/beam ! Combined flux in latest and established models = 1.5901 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 204 components and 1.5901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123143Jy sigma=0.000715 ! Fit after self-cal, rms=0.123134Jy sigma=0.000715 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123134Jy sigma=0.000715 ! Fit after self-cal, rms=0.123566Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.302 mas, bmaj=33.2 mas, bpa=-13.99 degrees ! Estimated noise=3497.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00424952 Jy ! Component: 100 - total flux cleaned = -0.00472789 Jy ! Component: 150 - total flux cleaned = -0.00487048 Jy ! Component: 200 - total flux cleaned = -0.00500134 Jy ! Total flux subtracted in 200 components = -0.00500134 Jy ! Clean residual min=-0.020728 max=0.015142 Jy/beam ! Clean residual mean=0.000075 rms=0.004364 Jy/beam ! Combined flux in latest and established models = 1.5851 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 212 components and 1.5851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123129Jy sigma=0.000711 ! Fit after self-cal, rms=0.123086Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15375e-05 Jy ! Component: 100 - total flux cleaned = -0.000101597 Jy ! Component: 150 - total flux cleaned = -0.000211002 Jy ! Component: 200 - total flux cleaned = -0.000310521 Jy ! Total flux subtracted in 200 components = -0.000310521 Jy ! Clean residual min=-0.020674 max=0.014564 Jy/beam ! Clean residual mean=0.000074 rms=0.004316 Jy/beam ! Combined flux in latest and established models = 1.58479 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 216 components and 1.58479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122927Jy sigma=0.000710 ! Fit after self-cal, rms=0.122875Jy sigma=0.000710 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=22.12 mas, bpa=-20.87 degrees ! Estimated noise=3022.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.403 x 22.12 at -20.87 degrees (North through East) ! Clean map min=-0.020336 max=1.0337 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122875Jy sigma=0.000710 ! Fit after self-cal, rms=0.112709Jy sigma=0.000633 ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=22.18 mas, bpa=-20.86 degrees ! Estimated noise=3030.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00413169 Jy ! Component: 100 - total flux cleaned = -0.00539749 Jy ! Component: 150 - total flux cleaned = -0.0062745 Jy ! Component: 200 - total flux cleaned = -0.00627881 Jy ! Total flux subtracted in 200 components = -0.00627881 Jy ! Clean residual min=-0.019495 max=0.012947 Jy/beam ! Clean residual mean=0.000051 rms=0.003763 Jy/beam ! Combined flux in latest and established models = 1.57851 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 229 components and 1.57851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112033Jy sigma=0.000629 ! Fit after self-cal, rms=0.112027Jy sigma=0.000629 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017873 Jy ! Component: 100 - total flux cleaned = -0.000309697 Jy ! Component: 150 - total flux cleaned = -0.000421472 Jy ! Component: 200 - total flux cleaned = -0.000530004 Jy ! Total flux subtracted in 200 components = -0.000530004 Jy ! Clean residual min=-0.019018 max=0.012620 Jy/beam ! Clean residual mean=0.000050 rms=0.003720 Jy/beam ! Combined flux in latest and established models = 1.57798 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 234 components and 1.57798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111769Jy sigma=0.000627 ! Fit after self-cal, rms=0.111769Jy sigma=0.000627 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111769Jy sigma=0.000627 ! Fit after self-cal, rms=0.112258Jy sigma=0.000625 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=19.31 mas, bpa=-20.46 degrees ! Estimated noise=3717.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.815911 Jy ! Component: 100 - total flux cleaned = 1.11992 Jy ! Component: 150 - total flux cleaned = 1.26991 Jy ! Component: 200 - total flux cleaned = 1.35872 Jy ! Total flux subtracted in 200 components = 1.35872 Jy ! Clean residual min=-0.035117 max=0.046384 Jy/beam ! Clean residual mean=0.000265 rms=0.010388 Jy/beam ! Combined flux in latest and established models = 1.35872 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 1.35872 Jy ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=22.34 mas, bpa=-20.94 degrees ! Estimated noise=3041.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785456 Jy ! Component: 100 - total flux cleaned = 0.124078 Jy ! Component: 150 - total flux cleaned = 0.152427 Jy ! Component: 200 - total flux cleaned = 0.170757 Jy ! Total flux subtracted in 200 components = 0.170757 Jy ! Clean residual min=-0.015898 max=0.016307 Jy/beam ! Clean residual mean=0.000060 rms=0.004407 Jy/beam ! Combined flux in latest and established models = 1.52948 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 148 components and 1.52948 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.352 mas, bmaj=33.45 mas, bpa=-14.1 degrees ! Estimated noise=3493.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178151 Jy ! Component: 100 - total flux cleaned = 0.0268179 Jy ! Component: 150 - total flux cleaned = 0.0294841 Jy ! Component: 200 - total flux cleaned = 0.0304305 Jy ! Total flux subtracted in 200 components = 0.0304305 Jy ! Clean residual min=-0.017356 max=0.013900 Jy/beam ! Clean residual mean=0.000061 rms=0.004123 Jy/beam ! Combined flux in latest and established models = 1.55991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104374 Jy ! Component: 100 - total flux cleaned = 0.00183968 Jy ! Component: 150 - total flux cleaned = 0.00271504 Jy ! Component: 200 - total flux cleaned = 0.0035307 Jy ! Total flux subtracted in 200 components = 0.0035307 Jy ! Clean residual min=-0.017837 max=0.013753 Jy/beam ! Clean residual mean=0.000063 rms=0.004027 Jy/beam ! Combined flux in latest and established models = 1.56344 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 175 components and 1.56344 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=22.34 mas, bpa=-20.94 degrees ! Estimated noise=3041.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000503417 Jy ! Component: 100 - total flux cleaned = -0.000490978 Jy ! Component: 150 - total flux cleaned = -2.2628e-05 Jy ! Component: 200 - total flux cleaned = 0.000269787 Jy ! Total flux subtracted in 200 components = 0.000269787 Jy ! Clean residual min=-0.017811 max=0.013644 Jy/beam ! Clean residual mean=0.000045 rms=0.003636 Jy/beam ! Combined flux in latest and established models = 1.56371 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 185 components and 1.56371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112021Jy sigma=0.000624 ! Fit after self-cal, rms=0.112008Jy sigma=0.000623 wmodel J1037-2934_S_2017_10_09_pus_map.mod ! Writing 185 model components to file: J1037-2934_S_2017_10_09_pus_map.mod wobs J1037-2934_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2017_10_09_pus_uvs.fits wwins J1037-2934_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1037-2934_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0064225 Jy ! Component: 100 - total flux cleaned = -0.00667089 Jy ! Component: 150 - total flux cleaned = -0.00772045 Jy ! Component: 200 - total flux cleaned = -0.00868652 Jy ! Component: 250 - total flux cleaned = -0.00996661 Jy ! Component: 300 - total flux cleaned = -0.0104813 Jy ! Component: 350 - total flux cleaned = -0.0103251 Jy ! Component: 400 - total flux cleaned = -0.0110841 Jy ! Component: 450 - total flux cleaned = -0.0115175 Jy ! Component: 500 - total flux cleaned = -0.0123503 Jy ! Component: 550 - total flux cleaned = -0.0132818 Jy ! Component: 600 - total flux cleaned = -0.0143079 Jy ! Component: 650 - total flux cleaned = -0.0154137 Jy ! Component: 700 - total flux cleaned = -0.0162411 Jy ! Component: 750 - total flux cleaned = -0.0165808 Jy ! Component: 800 - total flux cleaned = -0.0164707 Jy ! Component: 850 - total flux cleaned = -0.0164727 Jy ! Component: 900 - total flux cleaned = -0.0163708 Jy ! Component: 950 - total flux cleaned = -0.0163707 Jy ! Component: 1000 - total flux cleaned = -0.0164645 Jy ! Component: 1050 - total flux cleaned = -0.016746 Jy ! Component: 1100 - total flux cleaned = -0.0166523 Jy ! Component: 1150 - total flux cleaned = -0.0169211 Jy ! Component: 1200 - total flux cleaned = -0.0170087 Jy ! Component: 1250 - total flux cleaned = -0.0170956 Jy ! Component: 1300 - total flux cleaned = -0.0171799 Jy ! Component: 1350 - total flux cleaned = -0.0173446 Jy ! Component: 1400 - total flux cleaned = -0.0173456 Jy ! Component: 1450 - total flux cleaned = -0.0171899 Jy ! Component: 1500 - total flux cleaned = -0.0171143 Jy ! Component: 1550 - total flux cleaned = -0.0172637 Jy ! Component: 1600 - total flux cleaned = -0.0172633 Jy ! Component: 1650 - total flux cleaned = -0.0172619 Jy ! Component: 1700 - total flux cleaned = -0.0174019 Jy ! Component: 1750 - total flux cleaned = -0.0175382 Jy ! Component: 1800 - total flux cleaned = -0.0176059 Jy ! Component: 1850 - total flux cleaned = -0.0176705 Jy ! Component: 1900 - total flux cleaned = -0.0174764 Jy ! Component: 1950 - total flux cleaned = -0.0175403 Jy ! Component: 2000 - total flux cleaned = -0.0176008 Jy ! Component: 2050 - total flux cleaned = -0.0176612 Jy ! Component: 2100 - total flux cleaned = -0.0175409 Jy ! Component: 2150 - total flux cleaned = -0.0175998 Jy ! Component: 2200 - total flux cleaned = -0.017485 Jy ! Component: 2250 - total flux cleaned = -0.0176557 Jy ! Component: 2300 - total flux cleaned = -0.0174309 Jy ! Component: 2350 - total flux cleaned = -0.0175409 Jy ! Component: 2400 - total flux cleaned = -0.017378 Jy ! Component: 2450 - total flux cleaned = -0.0173779 Jy ! Component: 2500 - total flux cleaned = -0.0172196 Jy ! Component: 2550 - total flux cleaned = -0.0172719 Jy ! Component: 2600 - total flux cleaned = -0.0171177 Jy ! Component: 2650 - total flux cleaned = -0.0170677 Jy ! Component: 2700 - total flux cleaned = -0.0171679 Jy ! Component: 2750 - total flux cleaned = -0.0171178 Jy ! Component: 2800 - total flux cleaned = -0.0171178 Jy ! Component: 2850 - total flux cleaned = -0.0171657 Jy ! Component: 2900 - total flux cleaned = -0.0170716 Jy ! Component: 2950 - total flux cleaned = -0.0172593 Jy ! Component: 3000 - total flux cleaned = -0.0173981 Jy ! Component: 3050 - total flux cleaned = -0.0173978 Jy ! Component: 3100 - total flux cleaned = -0.017443 Jy ! Component: 3150 - total flux cleaned = -0.0173541 Jy ! Component: 3200 - total flux cleaned = -0.0174426 Jy ! Component: 3250 - total flux cleaned = -0.0173988 Jy ! Component: 3300 - total flux cleaned = -0.0173988 Jy ! Component: 3350 - total flux cleaned = -0.0175281 Jy ! Component: 3400 - total flux cleaned = -0.0175276 Jy ! Component: 3450 - total flux cleaned = -0.0176122 Jy ! Component: 3500 - total flux cleaned = -0.0176117 Jy ! Component: 3550 - total flux cleaned = -0.017612 Jy ! Component: 3600 - total flux cleaned = -0.0177353 Jy ! Component: 3650 - total flux cleaned = -0.0178166 Jy ! Component: 3700 - total flux cleaned = -0.0178165 Jy ! Component: 3750 - total flux cleaned = -0.0178967 Jy ! Component: 3800 - total flux cleaned = -0.0178964 Jy ! Component: 3850 - total flux cleaned = -0.0180539 Jy ! Component: 3900 - total flux cleaned = -0.0180149 Jy ! Component: 3950 - total flux cleaned = -0.0181312 Jy ! Component: 4000 - total flux cleaned = -0.0181309 Jy ! Component: 4050 - total flux cleaned = -0.0181692 Jy ! Total flux subtracted in 4096 components = -0.0182831 Jy ! Clean residual min=-0.002644 max=0.002008 Jy/beam ! Clean residual mean=0.000001 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 1.54542 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 449 components and 1.54542 Jy ![Exited script file: muppet] wmap "J1037-2934_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 22.34 at -20.94 degrees (North through East) ! Clean map min=-0.0083262 max=1.0621 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.06209 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000714193 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.201733 0.201733 0.403466 0.806931 1.61386 3.22773 6.45545 12.9109 25.8218 51.6436 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 22.34 at -20.94 degrees (North through East) ! Clean map min=-0.0083262 max=1.0621 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:10:14 2019