! Started logfile: J1037-2934_S_2017_09_26_pus_uvs.log on Sat May 11 13:00:09 2019 obs J1037-2934_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.519231 visibilities/baseline/integration-bin. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 1944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.547265Jy sigma=0.003030 ! Fit after self-cal, rms=0.523502Jy sigma=0.002893 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.495 mas, bmaj=13.72 mas, bpa=-14.32 degrees ! Estimated noise=3851.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.583459 Jy ! Component: 100 - total flux cleaned = 0.850939 Jy ! Total flux subtracted in 100 components = 0.850939 Jy ! Clean residual min=-0.076274 max=0.144822 Jy/beam ! Clean residual mean=-0.001962 rms=0.028948 Jy/beam ! Combined flux in latest and established models = 0.850939 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.850939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396395Jy sigma=0.002657 ! Fit after self-cal, rms=0.395791Jy sigma=0.002655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=15.91 mas, bpa=-15.29 degrees ! Estimated noise=3060.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.266389 Jy ! Component: 100 - total flux cleaned = 0.409118 Jy ! Component: 150 - total flux cleaned = 0.49147 Jy ! Component: 200 - total flux cleaned = 0.540393 Jy ! Total flux subtracted in 200 components = 0.540393 Jy ! Clean residual min=-0.039050 max=0.047895 Jy/beam ! Clean residual mean=-0.000769 rms=0.011063 Jy/beam ! Combined flux in latest and established models = 1.39133 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 81 components and 1.39133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194411Jy sigma=0.001063 ! Fit after self-cal, rms=0.193024Jy sigma=0.001060 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.19 KP 1.03 ! LA 1.00 MK 1.00 NL 1.00* OV 0.94 ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.36 KP 1.00 ! LA 0.95 MK 1.02 NL 1.12 OV 0.97 ! PT 0.94 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.20 KP 0.97 ! LA 0.96 MK 1.02 NL 1.03 OV 0.88 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.91 KP 1.00* ! LA 1.00* MK 0.99 NL 1.00* OV 1.40 ! PT 1.02 ! ! ! Fit before self-cal, rms=0.193024Jy sigma=0.001060 ! Fit after self-cal, rms=0.179789Jy sigma=0.000817 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=16.37 mas, bpa=-15.73 degrees ! Estimated noise=3109.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00446713 Jy ! Component: 100 - total flux cleaned = -0.00573111 Jy ! Component: 150 - total flux cleaned = -0.00645362 Jy ! Component: 200 - total flux cleaned = -0.00740753 Jy ! Total flux subtracted in 200 components = -0.00740753 Jy ! Clean residual min=-0.033017 max=0.025542 Jy/beam ! Clean residual mean=-0.000163 rms=0.006713 Jy/beam ! Combined flux in latest and established models = 1.38392 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 1.38392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177091Jy sigma=0.000810 ! Fit after self-cal, rms=0.177621Jy sigma=0.000810 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177621Jy sigma=0.000810 ! Fit after self-cal, rms=0.194254Jy sigma=0.000722 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=17.31 mas, bpa=-16.5 degrees ! Estimated noise=3221.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187963 Jy ! Component: 100 - total flux cleaned = 0.000133176 Jy ! Component: 150 - total flux cleaned = -0.000591238 Jy ! Component: 200 - total flux cleaned = -0.00150937 Jy ! Total flux subtracted in 200 components = -0.00150937 Jy ! Clean residual min=-0.019693 max=0.019678 Jy/beam ! Clean residual mean=-0.000159 rms=0.004624 Jy/beam ! Combined flux in latest and established models = 1.38241 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 101 components and 1.38242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192337Jy sigma=0.000711 ! Fit after self-cal, rms=0.192756Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000839991 Jy ! Component: 100 - total flux cleaned = -0.00133375 Jy ! Component: 150 - total flux cleaned = -0.00178628 Jy ! Component: 200 - total flux cleaned = -0.00218169 Jy ! Total flux subtracted in 200 components = -0.00218169 Jy ! Clean residual min=-0.018774 max=0.018980 Jy/beam ! Clean residual mean=-0.000167 rms=0.004550 Jy/beam ! Combined flux in latest and established models = 1.38023 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 106 components and 1.38023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192122Jy sigma=0.000707 ! Fit after self-cal, rms=0.192273Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192273Jy sigma=0.000707 ! Fit after self-cal, rms=0.246368Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=17.89 mas, bpa=-16.87 degrees ! Estimated noise=3259.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246446 Jy ! Component: 100 - total flux cleaned = -0.000494704 Jy ! Component: 150 - total flux cleaned = -0.001147 Jy ! Component: 200 - total flux cleaned = -0.00154356 Jy ! Total flux subtracted in 200 components = -0.00154356 Jy ! Clean residual min=-0.013390 max=0.017799 Jy/beam ! Clean residual mean=-0.000179 rms=0.003764 Jy/beam ! Combined flux in latest and established models = 1.37869 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 114 components and 1.37869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245403Jy sigma=0.000679 ! Fit after self-cal, rms=0.245683Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, 28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169203 Jy ! Component: 100 - total flux cleaned = 0.0236003 Jy ! Component: 150 - total flux cleaned = 0.0260789 Jy ! Component: 200 - total flux cleaned = 0.0284034 Jy ! Total flux subtracted in 200 components = 0.0284034 Jy ! Clean residual min=-0.010325 max=0.009897 Jy/beam ! Clean residual mean=-0.000056 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 1.40709 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 135 components and 1.40709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243857Jy sigma=0.000664 ! Fit after self-cal, rms=0.243971Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243971Jy sigma=0.000663 ! Fit after self-cal, rms=0.248054Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.068 mas, bmaj=33.5 mas, bpa=-4.988 degrees ! Estimated noise=3840.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399847 Jy ! Component: 100 - total flux cleaned = 0.00490587 Jy ! Component: 150 - total flux cleaned = 0.0053035 Jy ! Component: 200 - total flux cleaned = 0.00539514 Jy ! Total flux subtracted in 200 components = 0.00539514 Jy ! Clean residual min=-0.008044 max=0.007683 Jy/beam ! Clean residual mean=-0.000044 rms=0.002315 Jy/beam ! Combined flux in latest and established models = 1.41249 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 160 components and 1.41249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247774Jy sigma=0.000662 ! Fit after self-cal, rms=0.247841Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165421 Jy ! Component: 100 - total flux cleaned = 0.000333929 Jy ! Component: 150 - total flux cleaned = 0.000411303 Jy ! Component: 200 - total flux cleaned = 0.000556712 Jy ! Total flux subtracted in 200 components = 0.000556712 Jy ! Clean residual min=-0.008002 max=0.007639 Jy/beam ! Clean residual mean=-0.000040 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 1.41305 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 164 components and 1.41305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247648Jy sigma=0.000661 ! Fit after self-cal, rms=0.247691Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=17.91 mas, bpa=-16.91 degrees ! Estimated noise=3257.95 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.066 x 17.91 at -16.91 degrees (North through East) ! Clean map min=-0.0094802 max=0.85392 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247691Jy sigma=0.000661 ! Fit after self-cal, rms=0.333541Jy sigma=0.000584 ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=17.9 mas, bpa=-16.91 degrees ! Estimated noise=3256.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475838 Jy ! Component: 100 - total flux cleaned = 0.000654639 Jy ! Component: 150 - total flux cleaned = 0.00048933 Jy ! Component: 200 - total flux cleaned = 0.000487723 Jy ! Total flux subtracted in 200 components = 0.000487723 Jy ! Clean residual min=-0.009287 max=0.008924 Jy/beam ! Clean residual mean=-0.000005 rms=0.002404 Jy/beam ! Combined flux in latest and established models = 1.41353 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 186 components and 1.41353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333164Jy sigma=0.000582 ! Fit after self-cal, rms=0.333212Jy sigma=0.000582 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170675 Jy ! Component: 100 - total flux cleaned = -0.000175846 Jy ! Component: 150 - total flux cleaned = -0.000170663 Jy ! Component: 200 - total flux cleaned = -0.000168002 Jy ! Total flux subtracted in 200 components = -0.000168002 Jy ! Clean residual min=-0.009109 max=0.008646 Jy/beam ! Clean residual mean=-0.000005 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 1.41337 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 197 components and 1.41337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332902Jy sigma=0.000581 ! Fit after self-cal, rms=0.332943Jy sigma=0.000581 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332943Jy sigma=0.000581 ! Fit after self-cal, rms=0.335326Jy sigma=0.000581 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.527 mas, bmaj=15.72 mas, bpa=-16.35 degrees ! Estimated noise=4448.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.641931 Jy ! Component: 100 - total flux cleaned = 0.908049 Jy ! Component: 150 - total flux cleaned = 1.06426 Jy ! Component: 200 - total flux cleaned = 1.1637 Jy ! Total flux subtracted in 200 components = 1.1637 Jy ! Clean residual min=-0.031363 max=0.057214 Jy/beam ! Clean residual mean=-0.000855 rms=0.011734 Jy/beam ! Combined flux in latest and established models = 1.1637 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 1.1637 Jy ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=17.9 mas, bpa=-16.91 degrees ! Estimated noise=3255.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0927339 Jy ! Component: 100 - total flux cleaned = 0.143013 Jy ! Component: 150 - total flux cleaned = 0.171858 Jy ! Component: 200 - total flux cleaned = 0.190962 Jy ! Total flux subtracted in 200 components = 0.190962 Jy ! Clean residual min=-0.012829 max=0.017425 Jy/beam ! Clean residual mean=-0.000272 rms=0.004248 Jy/beam ! Combined flux in latest and established models = 1.35466 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 109 components and 1.35466 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.06 mas, bmaj=33.5 mas, bpa=-5.008 degrees ! Estimated noise=3843.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224596 Jy ! Component: 100 - total flux cleaned = 0.0357812 Jy ! Component: 150 - total flux cleaned = 0.0424981 Jy ! Component: 200 - total flux cleaned = 0.0453027 Jy ! Total flux subtracted in 200 components = 0.0453027 Jy ! Clean residual min=-0.009164 max=0.009840 Jy/beam ! Clean residual mean=-0.000122 rms=0.002925 Jy/beam ! Combined flux in latest and established models = 1.39997 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200478 Jy ! Component: 100 - total flux cleaned = 0.00350878 Jy ! Component: 150 - total flux cleaned = 0.004972 Jy ! Component: 200 - total flux cleaned = 0.00628184 Jy ! Total flux subtracted in 200 components = 0.00628184 Jy ! Clean residual min=-0.008482 max=0.009682 Jy/beam ! Clean residual mean=-0.000071 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 1.40625 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 135 components and 1.40625 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=17.9 mas, bpa=-16.91 degrees ! Estimated noise=3255.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116987 Jy ! Component: 100 - total flux cleaned = 0.00275623 Jy ! Component: 150 - total flux cleaned = 0.00424928 Jy ! Component: 200 - total flux cleaned = 0.00465313 Jy ! Total flux subtracted in 200 components = 0.00465313 Jy ! Clean residual min=-0.009709 max=0.009391 Jy/beam ! Clean residual mean=-0.000021 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 1.4109 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 161 components and 1.4109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334490Jy sigma=0.000584 ! Fit after self-cal, rms=0.334301Jy sigma=0.000584 wmodel J1037-2934_S_2017_09_26_pus_map.mod ! Writing 161 model components to file: J1037-2934_S_2017_09_26_pus_map.mod wobs J1037-2934_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2017_09_26_pus_uvs.fits wwins J1037-2934_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J1037-2934_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000190115 Jy ! Component: 100 - total flux cleaned = 0.000255895 Jy ! Component: 150 - total flux cleaned = 0.00152793 Jy ! Component: 200 - total flux cleaned = 0.00245923 Jy ! Component: 250 - total flux cleaned = 0.00296002 Jy ! Component: 300 - total flux cleaned = 0.00331495 Jy ! Component: 350 - total flux cleaned = 0.00319946 Jy ! Component: 400 - total flux cleaned = 0.00297946 Jy ! Component: 450 - total flux cleaned = 0.00276582 Jy ! Component: 500 - total flux cleaned = 0.00276733 Jy ! Component: 550 - total flux cleaned = 0.00306779 Jy ! Component: 600 - total flux cleaned = 0.00326195 Jy ! Component: 650 - total flux cleaned = 0.00373282 Jy ! Component: 700 - total flux cleaned = 0.00419338 Jy ! Component: 750 - total flux cleaned = 0.00455098 Jy ! Component: 800 - total flux cleaned = 0.00428645 Jy ! Component: 850 - total flux cleaned = 0.00420093 Jy ! Component: 900 - total flux cleaned = 0.00411731 Jy ! Component: 950 - total flux cleaned = 0.00395339 Jy ! Component: 1000 - total flux cleaned = 0.00371032 Jy ! Component: 1050 - total flux cleaned = 0.00363154 Jy ! Component: 1100 - total flux cleaned = 0.00339918 Jy ! Component: 1150 - total flux cleaned = 0.00332301 Jy ! Component: 1200 - total flux cleaned = 0.00324739 Jy ! Component: 1250 - total flux cleaned = 0.00302703 Jy ! Component: 1300 - total flux cleaned = 0.00295626 Jy ! Component: 1350 - total flux cleaned = 0.00295671 Jy ! Component: 1400 - total flux cleaned = 0.00274603 Jy ! Component: 1450 - total flux cleaned = 0.00240148 Jy ! Component: 1500 - total flux cleaned = 0.00206305 Jy ! Component: 1550 - total flux cleaned = 0.00206244 Jy ! Component: 1600 - total flux cleaned = 0.00179738 Jy ! Component: 1650 - total flux cleaned = 0.00160092 Jy ! Component: 1700 - total flux cleaned = 0.0013435 Jy ! Component: 1750 - total flux cleaned = 0.00115335 Jy ! Component: 1800 - total flux cleaned = 0.000904219 Jy ! Component: 1850 - total flux cleaned = 0.00102698 Jy ! Component: 1900 - total flux cleaned = 0.000966187 Jy ! Component: 1950 - total flux cleaned = 0.000906766 Jy ! Component: 2000 - total flux cleaned = 0.000848359 Jy ! Component: 2050 - total flux cleaned = 0.000848047 Jy ! Component: 2100 - total flux cleaned = 0.000904535 Jy ! Component: 2150 - total flux cleaned = 0.000904246 Jy ! Component: 2200 - total flux cleaned = 0.00107241 Jy ! Component: 2250 - total flux cleaned = 0.00123968 Jy ! Component: 2300 - total flux cleaned = 0.00129463 Jy ! Component: 2350 - total flux cleaned = 0.00151185 Jy ! Component: 2400 - total flux cleaned = 0.00167257 Jy ! Component: 2450 - total flux cleaned = 0.00172562 Jy ! Component: 2500 - total flux cleaned = 0.00188351 Jy ! Component: 2550 - total flux cleaned = 0.00193564 Jy ! Component: 2600 - total flux cleaned = 0.00224409 Jy ! Component: 2650 - total flux cleaned = 0.00239654 Jy ! Component: 2700 - total flux cleaned = 0.00249712 Jy ! Component: 2750 - total flux cleaned = 0.00269601 Jy ! Component: 2800 - total flux cleaned = 0.00289288 Jy ! Component: 2850 - total flux cleaned = 0.00294173 Jy ! Component: 2900 - total flux cleaned = 0.00328082 Jy ! Component: 2950 - total flux cleaned = 0.00342447 Jy ! Component: 3000 - total flux cleaned = 0.00366091 Jy ! Component: 3050 - total flux cleaned = 0.00380172 Jy ! Component: 3100 - total flux cleaned = 0.00398801 Jy ! Component: 3150 - total flux cleaned = 0.00403444 Jy ! Component: 3200 - total flux cleaned = 0.00426442 Jy ! Component: 3250 - total flux cleaned = 0.00444687 Jy ! Component: 3300 - total flux cleaned = 0.0045825 Jy ! Component: 3350 - total flux cleaned = 0.00476217 Jy ! Component: 3400 - total flux cleaned = 0.00476211 Jy ! Component: 3450 - total flux cleaned = 0.00502811 Jy ! Component: 3500 - total flux cleaned = 0.00516021 Jy ! Component: 3550 - total flux cleaned = 0.00533556 Jy ! Component: 3600 - total flux cleaned = 0.00550966 Jy ! Component: 3650 - total flux cleaned = 0.00568287 Jy ! Component: 3700 - total flux cleaned = 0.00585525 Jy ! Component: 3750 - total flux cleaned = 0.00598406 Jy ! Component: 3800 - total flux cleaned = 0.00619719 Jy ! Component: 3850 - total flux cleaned = 0.0062819 Jy ! Component: 3900 - total flux cleaned = 0.0064507 Jy ! Component: 3950 - total flux cleaned = 0.00653449 Jy ! Component: 4000 - total flux cleaned = 0.00666 Jy ! Component: 4050 - total flux cleaned = 0.00674321 Jy ! Total flux subtracted in 4096 components = 0.00674349 Jy ! Clean residual min=-0.002930 max=0.002375 Jy/beam ! Clean residual mean=0.000013 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 1.41765 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 434 components and 1.41765 Jy ![Exited script file: muppet] wmap "J1037-2934_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 17.9 at -16.91 degrees (North through East) ! Clean map min=-0.0099024 max=0.88729 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.887286 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000774044 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.261712 0.261712 0.523423 1.04685 2.09369 4.18739 8.37477 16.7495 33.4991 66.9982 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.887 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.061 x 17.9 at -16.91 degrees (North through East) ! Clean map min=-0.0099024 max=0.88729 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:00:14 2019