! Started logfile: J1037-2934_S_2017_08_05_pus_uvs.log on Thu May 9 19:27:33 2019 obs J1037-2934_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2017_08_05_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.491453 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 2300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.464640Jy sigma=0.003084 ! Fit after self-cal, rms=0.439016Jy sigma=0.002944 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.297 mas, bmaj=15.82 mas, bpa=0.2103 degrees ! Estimated noise=3572.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.681474 Jy ! Component: 100 - total flux cleaned = 0.962056 Jy ! Total flux subtracted in 100 components = 0.962056 Jy ! Clean residual min=-0.048024 max=0.127383 Jy/beam ! Clean residual mean=0.002148 rms=0.024443 Jy/beam ! Combined flux in latest and established models = 0.962056 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.962056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325725Jy sigma=0.002109 ! Fit after self-cal, rms=0.325433Jy sigma=0.002107 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.781 mas, bmaj=18.32 mas, bpa=-0.5053 degrees ! Estimated noise=2749.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172909 Jy ! Component: 100 - total flux cleaned = 0.249349 Jy ! Component: 150 - total flux cleaned = 0.286981 Jy ! Component: 200 - total flux cleaned = 0.306108 Jy ! Total flux subtracted in 200 components = 0.306108 Jy ! Clean residual min=-0.042522 max=0.069794 Jy/beam ! Clean residual mean=0.000914 rms=0.019630 Jy/beam ! Combined flux in latest and established models = 1.26816 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 67 components and 1.26816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238293Jy sigma=0.001439 ! Fit after self-cal, rms=0.238264Jy sigma=0.001439 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.18 KP 1.00 ! LA 0.95 MK 1.03 NL 1.12 OV 0.98 ! PT 0.95 SC 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.22 KP 0.95 ! LA 0.90 MK 0.98 NL 1.38 OV 1.02 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.84 ! LA 1.00* MK 0.98 NL 1.54 OV 0.92 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.238264Jy sigma=0.001439 ! Fit after self-cal, rms=0.204030Jy sigma=0.001017 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=18.86 mas, bpa=0.4888 degrees ! Estimated noise=2818.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0467912 Jy ! Component: 100 - total flux cleaned = -0.050066 Jy ! Component: 150 - total flux cleaned = -0.0527601 Jy ! Component: 200 - total flux cleaned = -0.0559158 Jy ! Total flux subtracted in 200 components = -0.0559158 Jy ! Clean residual min=-0.030493 max=0.044361 Jy/beam ! Clean residual mean=0.000422 rms=0.010811 Jy/beam ! Combined flux in latest and established models = 1.21225 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 1.21225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181717Jy sigma=0.000947 ! Fit after self-cal, rms=0.181863Jy sigma=0.000947 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181863Jy sigma=0.000947 ! Fit after self-cal, rms=0.126827Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.874 mas, bmaj=18.51 mas, bpa=1.01 degrees ! Estimated noise=2801.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314007 Jy ! Component: 100 - total flux cleaned = 0.00327811 Jy ! Component: 150 - total flux cleaned = 0.00326898 Jy ! Component: 200 - total flux cleaned = 0.00325878 Jy ! Total flux subtracted in 200 components = 0.00325878 Jy ! Clean residual min=-0.009379 max=0.013865 Jy/beam ! Clean residual mean=0.000028 rms=0.002505 Jy/beam ! Combined flux in latest and established models = 1.21551 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 93 components and 1.21551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126551Jy sigma=0.000675 ! Fit after self-cal, rms=0.126638Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115886 Jy ! Component: 100 - total flux cleaned = 0.0144222 Jy ! Component: 150 - total flux cleaned = 0.0154221 Jy ! Component: 200 - total flux cleaned = 0.0161648 Jy ! Total flux subtracted in 200 components = 0.0161648 Jy ! Clean residual min=-0.007402 max=0.007867 Jy/beam ! Clean residual mean=-0.000045 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 1.23167 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 109 components and 1.23167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125312Jy sigma=0.000666 ! Fit after self-cal, rms=0.125262Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125262Jy sigma=0.000666 ! Fit after self-cal, rms=0.124135Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.864 mas, bmaj=18.47 mas, bpa=0.9936 degrees ! Estimated noise=2792.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411404 Jy ! Component: 100 - total flux cleaned = 0.00586117 Jy ! Component: 150 - total flux cleaned = 0.00672251 Jy ! Component: 200 - total flux cleaned = 0.00728143 Jy ! Total flux subtracted in 200 components = 0.00728143 Jy ! Clean residual min=-0.006150 max=0.006793 Jy/beam ! Clean residual mean=-0.000008 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 1.23895 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 1.23895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123717Jy sigma=0.000663 ! Fit after self-cal, rms=0.123708Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776735 Jy ! Component: 100 - total flux cleaned = 0.00117848 Jy ! Component: 150 - total flux cleaned = 0.00155777 Jy ! Component: 200 - total flux cleaned = 0.00182447 Jy ! Total flux subtracted in 200 components = 0.00182447 Jy ! Clean residual min=-0.005678 max=0.006606 Jy/beam ! Clean residual mean=-0.000017 rms=0.001685 Jy/beam ! Combined flux in latest and established models = 1.24078 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 138 components and 1.24078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123514Jy sigma=0.000662 ! Fit after self-cal, rms=0.123514Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123514Jy sigma=0.000662 ! Fit after self-cal, rms=0.123003Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.827 mas, bmaj=23.96 mas, bpa=-0.08146 degrees ! Estimated noise=3314.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218923 Jy ! Component: 100 - total flux cleaned = 0.00269666 Jy ! Component: 150 - total flux cleaned = 0.0029923 Jy ! Component: 200 - total flux cleaned = 0.00318678 Jy ! Total flux subtracted in 200 components = 0.00318678 Jy ! Clean residual min=-0.005821 max=0.006189 Jy/beam ! Clean residual mean=0.000024 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 1.24396 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 148 components and 1.24396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122856Jy sigma=0.000661 ! Fit after self-cal, rms=0.122846Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276547 Jy ! Component: 100 - total flux cleaned = 0.000399104 Jy ! Component: 150 - total flux cleaned = 0.00051255 Jy ! Component: 200 - total flux cleaned = 0.00061887 Jy ! Total flux subtracted in 200 components = 0.00061887 Jy ! Clean residual min=-0.005784 max=0.006068 Jy/beam ! Clean residual mean=0.000018 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 1.24458 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 153 components and 1.24458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122770Jy sigma=0.000661 ! Fit after self-cal, rms=0.122771Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=18.45 mas, bpa=0.9728 degrees ! Estimated noise=2790.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 18.45 at 0.9728 degrees (North through East) ! Clean map min=-0.0098593 max=0.92092 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122771Jy sigma=0.000661 ! Fit after self-cal, rms=0.110365Jy sigma=0.000583 ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=18.44 mas, bpa=0.9601 degrees ! Estimated noise=2790.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672069 Jy ! Component: 100 - total flux cleaned = 0.00132547 Jy ! Component: 150 - total flux cleaned = 0.00182611 Jy ! Component: 200 - total flux cleaned = 0.00227614 Jy ! Total flux subtracted in 200 components = 0.00227614 Jy ! Clean residual min=-0.005326 max=0.006179 Jy/beam ! Clean residual mean=0.000021 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 1.24686 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 165 components and 1.24686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110207Jy sigma=0.000582 ! Fit after self-cal, rms=0.110215Jy sigma=0.000582 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123562 Jy ! Component: 100 - total flux cleaned = 0.000457391 Jy ! Component: 150 - total flux cleaned = 0.000707982 Jy ! Component: 200 - total flux cleaned = 0.000767714 Jy ! Total flux subtracted in 200 components = 0.000767714 Jy ! Clean residual min=-0.005132 max=0.005948 Jy/beam ! Clean residual mean=0.000017 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 1.24763 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 180 components and 1.24763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110133Jy sigma=0.000581 ! Fit after self-cal, rms=0.110139Jy sigma=0.000581 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110139Jy sigma=0.000581 ! Fit after self-cal, rms=0.109915Jy sigma=0.000581 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=16.11 mas, bpa=1.873 degrees ! Estimated noise=3638.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.694126 Jy ! Component: 100 - total flux cleaned = 0.975245 Jy ! Component: 150 - total flux cleaned = 1.10862 Jy ! Component: 200 - total flux cleaned = 1.17293 Jy ! Total flux subtracted in 200 components = 1.17293 Jy ! Clean residual min=-0.018886 max=0.030181 Jy/beam ! Clean residual mean=0.000426 rms=0.005985 Jy/beam ! Combined flux in latest and established models = 1.17294 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.17294 Jy ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=18.43 mas, bpa=0.9422 degrees ! Estimated noise=2790.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376526 Jy ! Component: 100 - total flux cleaned = 0.0578233 Jy ! Component: 150 - total flux cleaned = 0.0655331 Jy ! Component: 200 - total flux cleaned = 0.069957 Jy ! Total flux subtracted in 200 components = 0.069957 Jy ! Clean residual min=-0.009934 max=0.011827 Jy/beam ! Clean residual mean=0.000075 rms=0.002594 Jy/beam ! Combined flux in latest and established models = 1.24289 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 53 components and 1.24289 Jy ! Inverting map ! Added new window around map position (5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318776 Jy ! Component: 100 - total flux cleaned = 0.00352766 Jy ! Component: 150 - total flux cleaned = 0.00412217 Jy ! Component: 200 - total flux cleaned = 0.00509375 Jy ! Total flux subtracted in 200 components = 0.00509375 Jy ! Clean residual min=-0.007971 max=0.007060 Jy/beam ! Clean residual mean=0.000047 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 1.24799 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 82 components and 1.24799 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.815 mas, bmaj=23.93 mas, bpa=-0.1055 degrees ! Estimated noise=3318.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241985 Jy ! Component: 100 - total flux cleaned = 0.00183879 Jy ! Component: 150 - total flux cleaned = 0.00167395 Jy ! Component: 200 - total flux cleaned = 0.00152656 Jy ! Total flux subtracted in 200 components = 0.00152656 Jy ! Clean residual min=-0.006268 max=0.007078 Jy/beam ! Clean residual mean=0.000064 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 1.24951 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.55015e-06 Jy ! Component: 100 - total flux cleaned = -0.000123532 Jy ! Component: 150 - total flux cleaned = -0.000119666 Jy ! Component: 200 - total flux cleaned = -0.000225713 Jy ! Total flux subtracted in 200 components = -0.000225713 Jy ! Clean residual min=-0.006014 max=0.006539 Jy/beam ! Clean residual mean=0.000063 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 1.24929 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 134 components and 1.24929 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=18.43 mas, bpa=0.9422 degrees ! Estimated noise=2790.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000461474 Jy ! Component: 100 - total flux cleaned = -0.000738763 Jy ! Component: 150 - total flux cleaned = -0.00109307 Jy ! Component: 200 - total flux cleaned = -0.00119295 Jy ! Total flux subtracted in 200 components = -0.00119295 Jy ! Clean residual min=-0.005286 max=0.006143 Jy/beam ! Clean residual mean=0.000041 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 1.24809 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 163 components and 1.24809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109845Jy sigma=0.000581 ! Fit after self-cal, rms=0.109820Jy sigma=0.000581 wmodel J1037-2934_S_2017_08_05_pus_map.mod ! Writing 163 model components to file: J1037-2934_S_2017_08_05_pus_map.mod wobs J1037-2934_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2017_08_05_pus_uvs.fits wwins J1037-2934_S_2017_08_05_pus_map.win ! wwins: Wrote 4 windows to J1037-2934_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170845 Jy ! Component: 100 - total flux cleaned = 0.00107378 Jy ! Component: 150 - total flux cleaned = 0.000476139 Jy ! Component: 200 - total flux cleaned = 0.000154133 Jy ! Component: 250 - total flux cleaned = -0.000226803 Jy ! Component: 300 - total flux cleaned = -0.000442217 Jy ! Component: 350 - total flux cleaned = -0.000510283 Jy ! Component: 400 - total flux cleaned = -0.000644995 Jy ! Component: 450 - total flux cleaned = -0.000838877 Jy ! Component: 500 - total flux cleaned = -0.000900897 Jy ! Component: 550 - total flux cleaned = -0.00108239 Jy ! Component: 600 - total flux cleaned = -0.00119892 Jy ! Component: 650 - total flux cleaned = -0.00131138 Jy ! Component: 700 - total flux cleaned = -0.00142087 Jy ! Component: 750 - total flux cleaned = -0.00141847 Jy ! Component: 800 - total flux cleaned = -0.00136466 Jy ! Component: 850 - total flux cleaned = -0.00131344 Jy ! Component: 900 - total flux cleaned = -0.00121479 Jy ! Component: 950 - total flux cleaned = -0.00121441 Jy ! Component: 1000 - total flux cleaned = -0.00112056 Jy ! Component: 1050 - total flux cleaned = -0.00107371 Jy ! Component: 1100 - total flux cleaned = -0.000850606 Jy ! Component: 1150 - total flux cleaned = -0.000807206 Jy ! Component: 1200 - total flux cleaned = -0.000679802 Jy ! Component: 1250 - total flux cleaned = -0.000512824 Jy ! Component: 1300 - total flux cleaned = -0.000472664 Jy ! Component: 1350 - total flux cleaned = -0.000432028 Jy ! Component: 1400 - total flux cleaned = -0.00039193 Jy ! Component: 1450 - total flux cleaned = -0.000313655 Jy ! Component: 1500 - total flux cleaned = -0.000238148 Jy ! Component: 1550 - total flux cleaned = -0.000200663 Jy ! Component: 1600 - total flux cleaned = -0.000127699 Jy ! Component: 1650 - total flux cleaned = -0.000127664 Jy ! Component: 1700 - total flux cleaned = -5.64358e-05 Jy ! Component: 1750 - total flux cleaned = -2.10831e-05 Jy ! Component: 1800 - total flux cleaned = 1.34143e-05 Jy ! Component: 1850 - total flux cleaned = 1.38817e-05 Jy ! Component: 1900 - total flux cleaned = 0.000147871 Jy ! Component: 1950 - total flux cleaned = 0.000147809 Jy ! Component: 2000 - total flux cleaned = 0.000212902 Jy ! Component: 2050 - total flux cleaned = 0.000341279 Jy ! Component: 2100 - total flux cleaned = 0.000214109 Jy ! Component: 2150 - total flux cleaned = 0.000182893 Jy ! Component: 2200 - total flux cleaned = 0.000120883 Jy ! Component: 2250 - total flux cleaned = 0.000120636 Jy ! Component: 2300 - total flux cleaned = 2.99281e-05 Jy ! Component: 2350 - total flux cleaned = -5.9812e-05 Jy ! Component: 2400 - total flux cleaned = -8.95024e-05 Jy ! Component: 2450 - total flux cleaned = -0.000148217 Jy ! Component: 2500 - total flux cleaned = -0.000293244 Jy ! Component: 2550 - total flux cleaned = -0.000321949 Jy ! Component: 2600 - total flux cleaned = -0.000435776 Jy ! Component: 2650 - total flux cleaned = -0.000520238 Jy ! Component: 2700 - total flux cleaned = -0.000547726 Jy ! Component: 2750 - total flux cleaned = -0.000603169 Jy ! Component: 2800 - total flux cleaned = -0.000685861 Jy ! Component: 2850 - total flux cleaned = -0.000740453 Jy ! Component: 2900 - total flux cleaned = -0.000983667 Jy ! Component: 2950 - total flux cleaned = -0.00106358 Jy ! Component: 3000 - total flux cleaned = -0.00122247 Jy ! Component: 3050 - total flux cleaned = -0.00132748 Jy ! Component: 3100 - total flux cleaned = -0.00137979 Jy ! Component: 3150 - total flux cleaned = -0.00158687 Jy ! Component: 3200 - total flux cleaned = -0.00168965 Jy ! Component: 3250 - total flux cleaned = -0.00181709 Jy ! Component: 3300 - total flux cleaned = -0.00194368 Jy ! Component: 3350 - total flux cleaned = -0.00206938 Jy ! Component: 3400 - total flux cleaned = -0.0021941 Jy ! Component: 3450 - total flux cleaned = -0.00229321 Jy ! Component: 3500 - total flux cleaned = -0.00241633 Jy ! Component: 3550 - total flux cleaned = -0.00246495 Jy ! Component: 3600 - total flux cleaned = -0.00246506 Jy ! Component: 3650 - total flux cleaned = -0.00256142 Jy ! Component: 3700 - total flux cleaned = -0.00263342 Jy ! Component: 3750 - total flux cleaned = -0.00263352 Jy ! Component: 3800 - total flux cleaned = -0.0026808 Jy ! Component: 3850 - total flux cleaned = -0.0026573 Jy ! Component: 3900 - total flux cleaned = -0.00268079 Jy ! Component: 3950 - total flux cleaned = -0.00272738 Jy ! Component: 4000 - total flux cleaned = -0.00275064 Jy ! Component: 4050 - total flux cleaned = -0.00286633 Jy ! Total flux subtracted in 4096 components = -0.00286628 Jy ! Clean residual min=-0.001219 max=0.001291 Jy/beam ! Clean residual mean=-0.000006 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 1.24523 Jy keep ! Adding 352 model components to the UV plane model. ! The established model now contains 515 components and 1.24523 Jy ![Exited script file: muppet] wmap "J1037-2934_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.855 x 18.43 at 0.9422 degrees (North through East) ! Clean map min=-0.0084759 max=0.90842 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.908425 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000458049 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.151267 0.151267 0.302534 0.605068 1.21014 2.42027 4.84054 9.68109 19.3622 38.7243 77.4487 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.908 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.855 x 18.43 at 0.9422 degrees (North through East) ! Clean map min=-0.0084759 max=0.90842 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:27:39 2019