! Started logfile: J1037-2934_S_2017_07_16_pus_uvs.log on Thu May 9 11:07:32 2019 obs J1037-2934_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2017_07_16_pus_uva.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.277778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 300 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.537738Jy sigma=0.003743 ! Fit after self-cal, rms=0.534893Jy sigma=0.003732 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=30.24 mas, bpa=-9.692 degrees ! Estimated noise=9325.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.830544 Jy ! Component: 100 - total flux cleaned = 1.18405 Jy ! Total flux subtracted in 100 components = 1.18405 Jy ! Clean residual min=-0.098721 max=0.163125 Jy/beam ! Clean residual mean=0.001121 rms=0.048779 Jy/beam ! Combined flux in latest and established models = 1.18405 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.18405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316931Jy sigma=0.002178 ! Fit after self-cal, rms=0.316704Jy sigma=0.002177 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=31.41 mas, bpa=-9.732 degrees ! Estimated noise=8219.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21916 Jy ! Component: 100 - total flux cleaned = 0.325465 Jy ! Component: 150 - total flux cleaned = 0.38182 Jy ! Component: 200 - total flux cleaned = 0.390593 Jy ! Total flux subtracted in 200 components = 0.390593 Jy ! Clean residual min=-0.027059 max=0.027107 Jy/beam ! Clean residual mean=0.000304 rms=0.011808 Jy/beam ! Combined flux in latest and established models = 1.57465 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 85 components and 1.57465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115019Jy sigma=0.000751 ! Fit after self-cal, rms=0.114822Jy sigma=0.000749 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.05 ! LA 0.97 MK 1.01 NL 1.00* OV 0.98 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.04 ! LA 0.93 MK 0.98 NL 1.00* OV 1.04 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.98 ! LA 1.00* MK 1.03 NL 1.02 OV 0.94 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.114822Jy sigma=0.000749 ! Fit after self-cal, rms=0.094996Jy sigma=0.000623 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=30.64 mas, bpa=-9.742 degrees ! Estimated noise=8268.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186136 Jy ! Component: 100 - total flux cleaned = 0.0145675 Jy ! Component: 150 - total flux cleaned = 0.0145473 Jy ! Component: 200 - total flux cleaned = 0.0151379 Jy ! Total flux subtracted in 200 components = 0.0151379 Jy ! Clean residual min=-0.010042 max=0.010292 Jy/beam ! Clean residual mean=0.000114 rms=0.002799 Jy/beam ! Combined flux in latest and established models = 1.58979 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 116 components and 1.58979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085416Jy sigma=0.000551 ! Fit after self-cal, rms=0.085234Jy sigma=0.000549 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085234Jy sigma=0.000549 ! Fit after self-cal, rms=0.085053Jy sigma=0.000546 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=30.61 mas, bpa=-9.742 degrees ! Estimated noise=8275.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178254 Jy ! Component: 100 - total flux cleaned = 0.00259247 Jy ! Component: 150 - total flux cleaned = 0.00413813 Jy ! Component: 200 - total flux cleaned = 0.00546435 Jy ! Total flux subtracted in 200 components = 0.00546435 Jy ! Clean residual min=-0.004524 max=0.004442 Jy/beam ! Clean residual mean=0.000084 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 1.59525 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 152 components and 1.59525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083940Jy sigma=0.000538 ! Fit after self-cal, rms=0.083890Jy sigma=0.000538 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168788 Jy ! Component: 100 - total flux cleaned = -0.000976833 Jy ! Component: 150 - total flux cleaned = -0.000513002 Jy ! Component: 200 - total flux cleaned = -0.000114639 Jy ! Total flux subtracted in 200 components = -0.000114639 Jy ! Clean residual min=-0.001582 max=0.001584 Jy/beam ! Clean residual mean=-0.000015 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 1.59514 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 193 components and 1.59514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083462Jy sigma=0.000535 ! Fit after self-cal, rms=0.083462Jy sigma=0.000535 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083462Jy sigma=0.000535 ! Fit after self-cal, rms=0.083481Jy sigma=0.000534 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=30.6 mas, bpa=-9.742 degrees ! Estimated noise=8278.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186181 Jy ! Component: 100 - total flux cleaned = 0.00194842 Jy ! Component: 150 - total flux cleaned = 0.00202756 Jy ! Component: 200 - total flux cleaned = 0.00180723 Jy ! Total flux subtracted in 200 components = 0.00180723 Jy ! Clean residual min=-0.001200 max=0.001183 Jy/beam ! Clean residual mean=-0.000006 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 1.59694 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 237 components and 1.59694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083321Jy sigma=0.000533 ! Fit after self-cal, rms=0.083326Jy sigma=0.000533 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346842 Jy ! Component: 100 - total flux cleaned = 1.54653e-05 Jy ! Component: 150 - total flux cleaned = -0.000358044 Jy ! Component: 200 - total flux cleaned = -0.0004754 Jy ! Total flux subtracted in 200 components = -0.0004754 Jy ! Clean residual min=-0.000981 max=0.000973 Jy/beam ! Clean residual mean=-0.000013 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 1.59647 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 271 components and 1.59647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083245Jy sigma=0.000532 ! Fit after self-cal, rms=0.083242Jy sigma=0.000532 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083242Jy sigma=0.000532 ! Fit after self-cal, rms=0.083244Jy sigma=0.000532 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.028 mas, bmaj=32.79 mas, bpa=0.1248 degrees ! Estimated noise=10857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176813 Jy ! Component: 100 - total flux cleaned = 0.000238281 Jy ! Component: 150 - total flux cleaned = 0.000458866 Jy ! Component: 200 - total flux cleaned = 0.000721044 Jy ! Total flux subtracted in 200 components = 0.000721044 Jy ! Clean residual min=-0.001615 max=0.001559 Jy/beam ! Clean residual mean=-0.000033 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 1.59719 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 311 components and 1.59719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083241Jy sigma=0.000532 ! Fit after self-cal, rms=0.083226Jy sigma=0.000532 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350575 Jy ! Component: 100 - total flux cleaned = 0.000359193 Jy ! Component: 150 - total flux cleaned = 0.00055113 Jy ! Component: 200 - total flux cleaned = 0.000911171 Jy ! Total flux subtracted in 200 components = 0.000911171 Jy ! Clean residual min=-0.002222 max=0.002211 Jy/beam ! Clean residual mean=0.000004 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 1.5981 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 342 components and 1.5981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083222Jy sigma=0.000532 ! Fit after self-cal, rms=0.083215Jy sigma=0.000532 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=30.59 mas, bpa=-9.741 degrees ! Estimated noise=8280.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 30.59 at -9.741 degrees (North through East) ! Clean map min=-0.015415 max=0.90021 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083215Jy sigma=0.000532 ! Fit after self-cal, rms=0.069425Jy sigma=0.000440 ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=30.59 mas, bpa=-9.74 degrees ! Estimated noise=8284.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370425 Jy ! Component: 100 - total flux cleaned = 0.000168498 Jy ! Component: 150 - total flux cleaned = 0.000414927 Jy ! Component: 200 - total flux cleaned = 0.000599612 Jy ! Total flux subtracted in 200 components = 0.000599612 Jy ! Clean residual min=-0.001045 max=0.001036 Jy/beam ! Clean residual mean=0.000011 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 1.5987 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 389 components and 1.5987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069349Jy sigma=0.000439 ! Fit after self-cal, rms=0.069345Jy sigma=0.000439 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245503 Jy ! Component: 100 - total flux cleaned = 0.0004601 Jy ! Component: 150 - total flux cleaned = 0.000700361 Jy ! Component: 200 - total flux cleaned = 0.000653675 Jy ! Total flux subtracted in 200 components = 0.000653675 Jy ! Clean residual min=-0.000769 max=0.000768 Jy/beam ! Clean residual mean=-0.000012 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 1.59935 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 421 components and 1.59935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069283Jy sigma=0.000438 ! Fit after self-cal, rms=0.069289Jy sigma=0.000438 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069289Jy sigma=0.000438 ! Fit after self-cal, rms=0.069268Jy sigma=0.000438 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.065 mas, bmaj=30.08 mas, bpa=-9.706 degrees ! Estimated noise=9416.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.818521 Jy ! Component: 100 - total flux cleaned = 1.16221 Jy ! Component: 150 - total flux cleaned = 1.33942 Jy ! Component: 200 - total flux cleaned = 1.43855 Jy ! Total flux subtracted in 200 components = 1.43855 Jy ! Clean residual min=-0.047127 max=0.049435 Jy/beam ! Clean residual mean=0.000441 rms=0.017272 Jy/beam ! Combined flux in latest and established models = 1.43855 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 1.43855 Jy ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=30.59 mas, bpa=-9.741 degrees ! Estimated noise=8283.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.057558 Jy ! Component: 100 - total flux cleaned = 0.0673464 Jy ! Component: 150 - total flux cleaned = 0.0715743 Jy ! Component: 200 - total flux cleaned = 0.0766745 Jy ! Total flux subtracted in 200 components = 0.0766745 Jy ! Clean residual min=-0.013276 max=0.013060 Jy/beam ! Clean residual mean=0.000265 rms=0.005720 Jy/beam ! Combined flux in latest and established models = 1.51523 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 106 components and 1.51523 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.029 mas, bmaj=32.79 mas, bpa=0.1274 degrees ! Estimated noise=10859.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012447 Jy ! Component: 100 - total flux cleaned = 0.0103063 Jy ! Component: 150 - total flux cleaned = 0.00518822 Jy ! Component: 200 - total flux cleaned = 0.00215086 Jy ! Total flux subtracted in 200 components = 0.00215086 Jy ! Clean residual min=-0.013541 max=0.013433 Jy/beam ! Clean residual mean=0.000429 rms=0.004257 Jy/beam ! Combined flux in latest and established models = 1.51738 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017566 Jy ! Component: 100 - total flux cleaned = -0.000741525 Jy ! Component: 150 - total flux cleaned = -0.000997278 Jy ! Component: 200 - total flux cleaned = -0.00290643 Jy ! Total flux subtracted in 200 components = -0.00290643 Jy ! Clean residual min=-0.032958 max=0.033363 Jy/beam ! Clean residual mean=-0.000056 rms=0.010086 Jy/beam ! Combined flux in latest and established models = 1.51447 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 174 components and 1.51447 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=30.59 mas, bpa=-9.741 degrees ! Estimated noise=8283.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205916 Jy ! Component: 100 - total flux cleaned = 0.00119813 Jy ! Component: 150 - total flux cleaned = 0.00422922 Jy ! Component: 200 - total flux cleaned = 0.00619325 Jy ! Total flux subtracted in 200 components = 0.00619325 Jy ! Clean residual min=-0.017471 max=0.018123 Jy/beam ! Clean residual mean=0.000132 rms=0.004619 Jy/beam ! Combined flux in latest and established models = 1.52066 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 183 components and 1.52066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074817Jy sigma=0.000483 ! Fit after self-cal, rms=0.074003Jy sigma=0.000477 wmodel J1037-2934_S_2017_07_16_pus_map.mod ! Writing 183 model components to file: J1037-2934_S_2017_07_16_pus_map.mod wobs J1037-2934_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2017_07_16_pus_uvs.fits wwins J1037-2934_S_2017_07_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1037-2934_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.281 x 30.59 at -9.741 degrees (North through East) ! Clean map min=-0.02634 max=0.9124 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.912399 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00418041 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.37453 1.37453 2.74907 5.49813 10.9963 21.9925 43.9851 87.9701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0125 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.912 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.281 x 30.59 at -9.741 degrees (North through East) ! Clean map min=-0.02634 max=0.9124 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:07:36 2019