! Started logfile: J1037-2934_S_2017_03_23_pus_uvs.log on Mon May 13 09:56:31 2019 obs J1037-2934_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.533333 visibilities/baseline/integration-bin. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.451599Jy sigma=0.002950 ! Fit after self-cal, rms=0.450633Jy sigma=0.002941 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=13.23 mas, bpa=1.311 degrees ! Estimated noise=5061.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.599731 Jy ! Component: 100 - total flux cleaned = 0.847674 Jy ! Total flux subtracted in 100 components = 0.847674 Jy ! Clean residual min=-0.052686 max=0.122813 Jy/beam ! Clean residual mean=0.000777 rms=0.025748 Jy/beam ! Combined flux in latest and established models = 0.847674 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.847674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342279Jy sigma=0.002096 ! Fit after self-cal, rms=0.342020Jy sigma=0.002095 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=15.03 mas, bpa=2.544 degrees ! Estimated noise=4231.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210541 Jy ! Component: 100 - total flux cleaned = 0.315096 Jy ! Component: 150 - total flux cleaned = 0.371326 Jy ! Component: 200 - total flux cleaned = 0.401886 Jy ! Total flux subtracted in 200 components = 0.401886 Jy ! Clean residual min=-0.038460 max=0.035935 Jy/beam ! Clean residual mean=0.000233 rms=0.011151 Jy/beam ! Combined flux in latest and established models = 1.24956 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 66 components and 1.24956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176698Jy sigma=0.001027 ! Fit after self-cal, rms=0.176638Jy sigma=0.001026 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.03 KP 1.07 ! LA 1.02 MK 1.00* NL 0.90 OV 1.06 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.09 KP 1.02 ! LA 0.97 MK 1.00* NL 1.02 OV 1.11 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.05 KP 0.89 ! LA 0.76 MK 1.00* NL 1.17 OV 0.98 ! PT 0.94 SC 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00 KP 1.00* ! LA 0.75 MK 1.00* NL 1.00* OV 1.21 ! PT 1.00 SC 1.09 ! ! ! Fit before self-cal, rms=0.176638Jy sigma=0.001026 ! Fit after self-cal, rms=0.105587Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=15.21 mas, bpa=2.71 degrees ! Estimated noise=4212.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00432289 Jy ! Component: 100 - total flux cleaned = -0.00472588 Jy ! Component: 150 - total flux cleaned = -0.00497046 Jy ! Component: 200 - total flux cleaned = -0.0053115 Jy ! Total flux subtracted in 200 components = -0.0053115 Jy ! Clean residual min=-0.011718 max=0.016887 Jy/beam ! Clean residual mean=0.000039 rms=0.003549 Jy/beam ! Combined flux in latest and established models = 1.24425 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 74 components and 1.24425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105208Jy sigma=0.000658 ! Fit after self-cal, rms=0.105165Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105165Jy sigma=0.000657 ! Fit after self-cal, rms=0.105019Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=15.23 mas, bpa=2.751 degrees ! Estimated noise=4206.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00351172 Jy ! Component: 100 - total flux cleaned = -0.00394888 Jy ! Component: 150 - total flux cleaned = -0.00425875 Jy ! Component: 200 - total flux cleaned = -0.00451826 Jy ! Total flux subtracted in 200 components = -0.00451826 Jy ! Clean residual min=-0.010959 max=0.016377 Jy/beam ! Clean residual mean=0.000037 rms=0.003432 Jy/beam ! Combined flux in latest and established models = 1.23973 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 76 components and 1.23973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104761Jy sigma=0.000656 ! Fit after self-cal, rms=0.104739Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136263 Jy ! Component: 100 - total flux cleaned = 0.0174492 Jy ! Component: 150 - total flux cleaned = 0.0190912 Jy ! Component: 200 - total flux cleaned = 0.0202882 Jy ! Total flux subtracted in 200 components = 0.0202882 Jy ! Clean residual min=-0.009288 max=0.009143 Jy/beam ! Clean residual mean=0.000003 rms=0.002602 Jy/beam ! Combined flux in latest and established models = 1.26002 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 1.26002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102903Jy sigma=0.000644 ! Fit after self-cal, rms=0.102837Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102837Jy sigma=0.000643 ! Fit after self-cal, rms=0.102470Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=15.24 mas, bpa=2.765 degrees ! Estimated noise=4196.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016894 Jy ! Component: 100 - total flux cleaned = 0.00211696 Jy ! Component: 150 - total flux cleaned = 0.00211591 Jy ! Component: 200 - total flux cleaned = 0.00211426 Jy ! Total flux subtracted in 200 components = 0.00211426 Jy ! Clean residual min=-0.008890 max=0.009112 Jy/beam ! Clean residual mean=0.000002 rms=0.002458 Jy/beam ! Combined flux in latest and established models = 1.26213 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 115 components and 1.26213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102120Jy sigma=0.000641 ! Fit after self-cal, rms=0.102121Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102463 Jy ! Component: 100 - total flux cleaned = 0.00112231 Jy ! Component: 150 - total flux cleaned = 0.00112358 Jy ! Component: 200 - total flux cleaned = 0.00121702 Jy ! Total flux subtracted in 200 components = 0.00121702 Jy ! Clean residual min=-0.008664 max=0.009099 Jy/beam ! Clean residual mean=-0.000001 rms=0.002411 Jy/beam ! Combined flux in latest and established models = 1.26335 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 133 components and 1.26335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101944Jy sigma=0.000640 ! Fit after self-cal, rms=0.101942Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101942Jy sigma=0.000640 ! Fit after self-cal, rms=0.101944Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.713 mas, bmaj=20.95 mas, bpa=-6.087 degrees ! Estimated noise=5022.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656788 Jy ! Component: 100 - total flux cleaned = 0.000582373 Jy ! Component: 150 - total flux cleaned = 0.000582093 Jy ! Component: 200 - total flux cleaned = 0.00051753 Jy ! Total flux subtracted in 200 components = 0.00051753 Jy ! Clean residual min=-0.008521 max=0.006511 Jy/beam ! Clean residual mean=-0.000007 rms=0.002207 Jy/beam ! Combined flux in latest and established models = 1.26387 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 145 components and 1.26387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101862Jy sigma=0.000639 ! Fit after self-cal, rms=0.101865Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201537 Jy ! Component: 100 - total flux cleaned = 0.000144797 Jy ! Component: 150 - total flux cleaned = 0.000145321 Jy ! Component: 200 - total flux cleaned = 9.34562e-05 Jy ! Total flux subtracted in 200 components = 9.34562e-05 Jy ! Clean residual min=-0.008199 max=0.006422 Jy/beam ! Clean residual mean=-0.000010 rms=0.002189 Jy/beam ! Combined flux in latest and established models = 1.26396 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 152 components and 1.26396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101831Jy sigma=0.000639 ! Fit after self-cal, rms=0.101830Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=15.25 mas, bpa=2.777 degrees ! Estimated noise=4195.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.801 x 15.25 at 2.777 degrees (North through East) ! Clean map min=-0.007757 max=0.83725 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101830Jy sigma=0.000639 ! Fit after self-cal, rms=0.095490Jy sigma=0.000591 ! Inverting map and beam ! Estimated beam: bmin=3.802 mas, bmaj=15.26 mas, bpa=2.776 degrees ! Estimated noise=4198.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416828 Jy ! Component: 100 - total flux cleaned = -0.000675984 Jy ! Component: 150 - total flux cleaned = -0.000837333 Jy ! Component: 200 - total flux cleaned = -0.000988152 Jy ! Total flux subtracted in 200 components = -0.000988152 Jy ! Clean residual min=-0.007927 max=0.009367 Jy/beam ! Clean residual mean=-0.000006 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 1.26297 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 179 components and 1.26297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095350Jy sigma=0.000590 ! Fit after self-cal, rms=0.095345Jy sigma=0.000590 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.03271e-07 Jy ! Component: 100 - total flux cleaned = -6.92219e-05 Jy ! Component: 150 - total flux cleaned = -3.01192e-07 Jy ! Component: 200 - total flux cleaned = -6.57552e-05 Jy ! Total flux subtracted in 200 components = -6.57552e-05 Jy ! Clean residual min=-0.007902 max=0.009345 Jy/beam ! Clean residual mean=-0.000005 rms=0.002308 Jy/beam ! Combined flux in latest and established models = 1.26291 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 193 components and 1.26291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095257Jy sigma=0.000589 ! Fit after self-cal, rms=0.095252Jy sigma=0.000589 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095252Jy sigma=0.000589 ! Fit after self-cal, rms=0.095274Jy sigma=0.000589 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=13.34 mas, bpa=1.753 degrees ! Estimated noise=5098.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.604141 Jy ! Component: 100 - total flux cleaned = 0.851578 Jy ! Component: 150 - total flux cleaned = 0.990687 Jy ! Component: 200 - total flux cleaned = 1.07396 Jy ! Total flux subtracted in 200 components = 1.07396 Jy ! Clean residual min=-0.033008 max=0.055023 Jy/beam ! Clean residual mean=0.000338 rms=0.010511 Jy/beam ! Combined flux in latest and established models = 1.07396 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 1.07396 Jy ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=15.26 mas, bpa=2.773 degrees ! Estimated noise=4198.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-62.5, 111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0771904 Jy ! Component: 100 - total flux cleaned = 0.116944 Jy ! Component: 150 - total flux cleaned = 0.139641 Jy ! Component: 200 - total flux cleaned = 0.154826 Jy ! Total flux subtracted in 200 components = 0.154826 Jy ! Clean residual min=-0.012152 max=0.015966 Jy/beam ! Clean residual mean=0.000099 rms=0.003569 Jy/beam ! Combined flux in latest and established models = 1.22879 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 93 components and 1.22879 Jy ! Inverting map ! Added new window around map position (64, -113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145515 Jy ! Component: 100 - total flux cleaned = 0.0207772 Jy ! Component: 150 - total flux cleaned = 0.0243978 Jy ! Component: 200 - total flux cleaned = 0.0272608 Jy ! Total flux subtracted in 200 components = 0.0272608 Jy ! Clean residual min=-0.009557 max=0.009759 Jy/beam ! Clean residual mean=0.000037 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 1.25605 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 123 components and 1.25605 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.72 mas, bmaj=20.98 mas, bpa=-6.101 degrees ! Estimated noise=5020.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051521 Jy ! Component: 100 - total flux cleaned = 0.00693009 Jy ! Component: 150 - total flux cleaned = 0.00773147 Jy ! Component: 200 - total flux cleaned = 0.00814357 Jy ! Total flux subtracted in 200 components = 0.00814357 Jy ! Clean residual min=-0.007635 max=0.006074 Jy/beam ! Clean residual mean=0.000011 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 1.26419 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188806 Jy ! Component: 100 - total flux cleaned = 0.000360149 Jy ! Component: 150 - total flux cleaned = 0.000441053 Jy ! Component: 200 - total flux cleaned = 0.000518166 Jy ! Total flux subtracted in 200 components = 0.000518166 Jy ! Clean residual min=-0.007508 max=0.005907 Jy/beam ! Clean residual mean=0.000007 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 1.26471 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 141 components and 1.26471 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=15.26 mas, bpa=2.773 degrees ! Estimated noise=4198.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000722407 Jy ! Component: 100 - total flux cleaned = -0.00103908 Jy ! Component: 150 - total flux cleaned = -0.00132231 Jy ! Component: 200 - total flux cleaned = -0.00132402 Jy ! Total flux subtracted in 200 components = -0.00132402 Jy ! Clean residual min=-0.007689 max=0.008490 Jy/beam ! Clean residual mean=0.000007 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 1.26338 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 168 components and 1.26338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094615Jy sigma=0.000585 ! Fit after self-cal, rms=0.094530Jy sigma=0.000584 wmodel J1037-2934_S_2017_03_23_pus_map.mod ! Writing 168 model components to file: J1037-2934_S_2017_03_23_pus_map.mod wobs J1037-2934_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2017_03_23_pus_uvs.fits wwins J1037-2934_S_2017_03_23_pus_map.win ! wwins: Wrote 4 windows to J1037-2934_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169378 Jy ! Component: 100 - total flux cleaned = 0.0027021 Jy ! Component: 150 - total flux cleaned = 0.00350989 Jy ! Component: 200 - total flux cleaned = 0.0044723 Jy ! Component: 250 - total flux cleaned = 0.00487515 Jy ! Component: 300 - total flux cleaned = 0.00488147 Jy ! Component: 350 - total flux cleaned = 0.00478954 Jy ! Component: 400 - total flux cleaned = 0.00470219 Jy ! Component: 450 - total flux cleaned = 0.00470089 Jy ! Component: 500 - total flux cleaned = 0.00470272 Jy ! Component: 550 - total flux cleaned = 0.00485885 Jy ! Component: 600 - total flux cleaned = 0.0048589 Jy ! Component: 650 - total flux cleaned = 0.00478396 Jy ! Component: 700 - total flux cleaned = 0.00463966 Jy ! Component: 750 - total flux cleaned = 0.00450051 Jy ! Component: 800 - total flux cleaned = 0.00456889 Jy ! Component: 850 - total flux cleaned = 0.00470012 Jy ! Component: 900 - total flux cleaned = 0.00470016 Jy ! Component: 950 - total flux cleaned = 0.00482719 Jy ! Component: 1000 - total flux cleaned = 0.00488906 Jy ! Component: 1050 - total flux cleaned = 0.00488832 Jy ! Component: 1100 - total flux cleaned = 0.00494802 Jy ! Component: 1150 - total flux cleaned = 0.00494757 Jy ! Component: 1200 - total flux cleaned = 0.00512104 Jy ! Component: 1250 - total flux cleaned = 0.00511962 Jy ! Component: 1300 - total flux cleaned = 0.00523096 Jy ! Component: 1350 - total flux cleaned = 0.00523086 Jy ! Component: 1400 - total flux cleaned = 0.00528434 Jy ! Component: 1450 - total flux cleaned = 0.00528327 Jy ! Component: 1500 - total flux cleaned = 0.00507363 Jy ! Component: 1550 - total flux cleaned = 0.00502172 Jy ! Component: 1600 - total flux cleaned = 0.00517498 Jy ! Component: 1650 - total flux cleaned = 0.00492057 Jy ! Component: 1700 - total flux cleaned = 0.00466952 Jy ! Component: 1750 - total flux cleaned = 0.00432023 Jy ! Component: 1800 - total flux cleaned = 0.00417034 Jy ! Component: 1850 - total flux cleaned = 0.00392015 Jy ! Component: 1900 - total flux cleaned = 0.0036698 Jy ! Component: 1950 - total flux cleaned = 0.00346838 Jy ! Component: 2000 - total flux cleaned = 0.00326761 Jy ! Component: 2050 - total flux cleaned = 0.00306577 Jy ! Component: 2100 - total flux cleaned = 0.00286361 Jy ! Component: 2150 - total flux cleaned = 0.00266059 Jy ! Component: 2200 - total flux cleaned = 0.00235446 Jy ! Component: 2250 - total flux cleaned = 0.00230301 Jy ! Component: 2300 - total flux cleaned = 0.00225079 Jy ! Component: 2350 - total flux cleaned = 0.00219848 Jy ! Component: 2400 - total flux cleaned = 0.0021453 Jy ! Component: 2450 - total flux cleaned = 0.00214444 Jy ! Component: 2500 - total flux cleaned = 0.00214417 Jy ! Component: 2550 - total flux cleaned = 0.00219961 Jy ! Component: 2600 - total flux cleaned = 0.0022561 Jy ! Component: 2650 - total flux cleaned = 0.00231366 Jy ! Component: 2700 - total flux cleaned = 0.00231297 Jy ! Component: 2750 - total flux cleaned = 0.00237186 Jy ! Component: 2800 - total flux cleaned = 0.00237211 Jy ! Component: 2850 - total flux cleaned = 0.00230886 Jy ! Component: 2900 - total flux cleaned = 0.00237224 Jy ! Component: 2950 - total flux cleaned = 0.00237229 Jy ! Component: 3000 - total flux cleaned = 0.00230554 Jy ! Component: 3050 - total flux cleaned = 0.00237235 Jy ! Component: 3100 - total flux cleaned = 0.00237197 Jy ! Component: 3150 - total flux cleaned = 0.00237184 Jy ! Component: 3200 - total flux cleaned = 0.00244554 Jy ! Component: 3250 - total flux cleaned = 0.00236989 Jy ! Component: 3300 - total flux cleaned = 0.00244698 Jy ! Component: 3350 - total flux cleaned = 0.00236805 Jy ! Component: 3400 - total flux cleaned = 0.00236688 Jy ! Component: 3450 - total flux cleaned = 0.00244981 Jy ! Component: 3500 - total flux cleaned = 0.00245035 Jy ! Component: 3550 - total flux cleaned = 0.00253739 Jy ! Component: 3600 - total flux cleaned = 0.00262773 Jy ! Component: 3650 - total flux cleaned = 0.00271923 Jy ! Component: 3700 - total flux cleaned = 0.00291259 Jy ! Component: 3750 - total flux cleaned = 0.00301331 Jy ! Component: 3800 - total flux cleaned = 0.00301427 Jy ! Component: 3850 - total flux cleaned = 0.00311899 Jy ! Component: 3900 - total flux cleaned = 0.00322742 Jy ! Component: 3950 - total flux cleaned = 0.00333707 Jy ! Component: 4000 - total flux cleaned = 0.00345555 Jy ! Component: 4050 - total flux cleaned = 0.00345697 Jy ! Total flux subtracted in 4096 components = 0.00357972 Jy ! Clean residual min=-0.007212 max=0.006804 Jy/beam ! Clean residual mean=-0.000061 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 1.26696 Jy keep ! Adding 203 model components to the UV plane model. ! The established model now contains 371 components and 1.26696 Jy ![Exited script file: muppet] wmap "J1037-2934_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.803 x 15.26 at 2.773 degrees (North through East) ! Clean map min=-0.0098213 max=0.82464 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.824639 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00164719 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.59924 0.59924 1.19848 2.39696 4.79392 9.58784 19.1757 38.3514 76.7027 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0049 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.824 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.803 x 15.26 at 2.773 degrees (North through East) ! Clean map min=-0.0098213 max=0.82464 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:56:36 2019