! Started logfile: J1037-2934_S_2017_02_24_pus_uvs.log on Sat May 4 11:24:50 2019 obs J1037-2934_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2017_02_24_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.402778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.339051Jy sigma=0.001993 ! Fit after self-cal, rms=0.332482Jy sigma=0.001955 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=13.42 mas, bpa=-11.03 degrees ! Estimated noise=7481.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.634425 Jy ! Component: 100 - total flux cleaned = 0.845812 Jy ! Total flux subtracted in 100 components = 0.845812 Jy ! Clean residual min=-0.048559 max=0.113512 Jy/beam ! Clean residual mean=0.000436 rms=0.026781 Jy/beam ! Combined flux in latest and established models = 0.845812 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.845812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279070Jy sigma=0.001630 ! Fit after self-cal, rms=0.278925Jy sigma=0.001629 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.415 mas, bmaj=15.1 mas, bpa=-7.519 degrees ! Estimated noise=5802.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178491 Jy ! Component: 100 - total flux cleaned = 0.269835 Jy ! Component: 150 - total flux cleaned = 0.319707 Jy ! Component: 200 - total flux cleaned = 0.349824 Jy ! Total flux subtracted in 200 components = 0.349824 Jy ! Clean residual min=-0.024265 max=0.027823 Jy/beam ! Clean residual mean=0.000262 rms=0.008592 Jy/beam ! Combined flux in latest and established models = 1.19564 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 87 components and 1.19564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149594Jy sigma=0.000781 ! Fit after self-cal, rms=0.149538Jy sigma=0.000781 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.07 KP 0.98 ! LA 0.96 MK 1.00* NL 1.03 OV 1.00* ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.12 KP 0.92 ! LA 0.91 MK 1.00* NL 1.00 OV 1.00* ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.05 KP 1.01 ! LA 0.99 MK 1.00* NL 1.11 OV 1.00* ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.90 KP 1.00* ! LA 0.97 MK 1.00* NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.149538Jy sigma=0.000781 ! Fit after self-cal, rms=0.129545Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.389 mas, bmaj=15.23 mas, bpa=-7.245 degrees ! Estimated noise=5763.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0085905 Jy ! Component: 100 - total flux cleaned = -0.00955401 Jy ! Component: 150 - total flux cleaned = -0.00939927 Jy ! Component: 200 - total flux cleaned = -0.00924812 Jy ! Total flux subtracted in 200 components = -0.00924812 Jy ! Clean residual min=-0.013997 max=0.015262 Jy/beam ! Clean residual mean=0.000102 rms=0.004296 Jy/beam ! Combined flux in latest and established models = 1.18639 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 1.18639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128401Jy sigma=0.000667 ! Fit after self-cal, rms=0.128461Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128461Jy sigma=0.000667 ! Fit after self-cal, rms=0.128248Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.387 mas, bmaj=15.27 mas, bpa=-7.098 degrees ! Estimated noise=5746.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00687664 Jy ! Component: 100 - total flux cleaned = -0.00823093 Jy ! Component: 150 - total flux cleaned = -0.00822719 Jy ! Component: 200 - total flux cleaned = -0.00822628 Jy ! Total flux subtracted in 200 components = -0.00822628 Jy ! Clean residual min=-0.013258 max=0.014684 Jy/beam ! Clean residual mean=0.000096 rms=0.004007 Jy/beam ! Combined flux in latest and established models = 1.17816 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 1.17816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127672Jy sigma=0.000663 ! Fit after self-cal, rms=0.127687Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.26724e-05 Jy ! Component: 100 - total flux cleaned = 9.4517e-05 Jy ! Component: 150 - total flux cleaned = 0.000196534 Jy ! Component: 200 - total flux cleaned = 0.00029537 Jy ! Total flux subtracted in 200 components = 0.00029537 Jy ! Clean residual min=-0.013024 max=0.014676 Jy/beam ! Clean residual mean=0.000095 rms=0.003954 Jy/beam ! Combined flux in latest and established models = 1.17846 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 119 components and 1.17846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127478Jy sigma=0.000663 ! Fit after self-cal, rms=0.127478Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127478Jy sigma=0.000663 ! Fit after self-cal, rms=0.127476Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.387 mas, bmaj=15.3 mas, bpa=-6.995 degrees ! Estimated noise=5736.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00554186 Jy ! Component: 100 - total flux cleaned = -0.00711412 Jy ! Component: 150 - total flux cleaned = -0.00711239 Jy ! Component: 200 - total flux cleaned = -0.00710788 Jy ! Total flux subtracted in 200 components = -0.00710788 Jy ! Clean residual min=-0.012283 max=0.014245 Jy/beam ! Clean residual mean=0.000090 rms=0.003758 Jy/beam ! Combined flux in latest and established models = 1.17135 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 128 components and 1.17135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127130Jy sigma=0.000661 ! Fit after self-cal, rms=0.127142Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.58612e-05 Jy ! Component: 100 - total flux cleaned = 6.46345e-05 Jy ! Component: 150 - total flux cleaned = 0.000145724 Jy ! Component: 200 - total flux cleaned = 0.00022421 Jy ! Total flux subtracted in 200 components = 0.00022421 Jy ! Clean residual min=-0.012072 max=0.014187 Jy/beam ! Clean residual mean=0.000089 rms=0.003725 Jy/beam ! Combined flux in latest and established models = 1.17157 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 132 components and 1.17157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127012Jy sigma=0.000660 ! Fit after self-cal, rms=0.127013Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127013Jy sigma=0.000660 ! Fit after self-cal, rms=0.127081Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.433 mas, bmaj=18.8 mas, bpa=-12.31 degrees ! Estimated noise=6608.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00365497 Jy ! Component: 100 - total flux cleaned = -0.00376007 Jy ! Component: 150 - total flux cleaned = -0.0036702 Jy ! Component: 200 - total flux cleaned = -0.0036699 Jy ! Total flux subtracted in 200 components = -0.0036699 Jy ! Clean residual min=-0.013511 max=0.015165 Jy/beam ! Clean residual mean=0.000132 rms=0.004264 Jy/beam ! Combined flux in latest and established models = 1.1679 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 137 components and 1.1679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126879Jy sigma=0.000659 ! Fit after self-cal, rms=0.126891Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100816 Jy ! Component: 100 - total flux cleaned = 0.000102147 Jy ! Component: 150 - total flux cleaned = 0.000181182 Jy ! Component: 200 - total flux cleaned = 0.000184509 Jy ! Total flux subtracted in 200 components = 0.000184509 Jy ! Clean residual min=-0.013489 max=0.015005 Jy/beam ! Clean residual mean=0.000130 rms=0.004223 Jy/beam ! Combined flux in latest and established models = 1.16809 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 137 components and 1.16809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126824Jy sigma=0.000659 ! Fit after self-cal, rms=0.126824Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.386 mas, bmaj=15.32 mas, bpa=-6.912 degrees ! Estimated noise=5727.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.386 x 15.32 at -6.912 degrees (North through East) ! Clean map min=-0.011158 max=0.86321 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126824Jy sigma=0.000659 ! Fit after self-cal, rms=0.115713Jy sigma=0.000576 ! Inverting map and beam ! Estimated beam: bmin=4.379 mas, bmaj=15.34 mas, bpa=-6.818 degrees ! Estimated noise=5713.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00474437 Jy ! Component: 100 - total flux cleaned = -0.00553179 Jy ! Component: 150 - total flux cleaned = -0.00585221 Jy ! Component: 200 - total flux cleaned = -0.00605211 Jy ! Total flux subtracted in 200 components = -0.00605211 Jy ! Clean residual min=-0.011273 max=0.013924 Jy/beam ! Clean residual mean=0.000088 rms=0.003470 Jy/beam ! Combined flux in latest and established models = 1.16204 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 142 components and 1.16204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115450Jy sigma=0.000575 ! Fit after self-cal, rms=0.115443Jy sigma=0.000575 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191605 Jy ! Component: 100 - total flux cleaned = -0.000415121 Jy ! Component: 150 - total flux cleaned = -0.000466559 Jy ! Component: 200 - total flux cleaned = -0.000465925 Jy ! Total flux subtracted in 200 components = -0.000465925 Jy ! Clean residual min=-0.011227 max=0.013799 Jy/beam ! Clean residual mean=0.000088 rms=0.003455 Jy/beam ! Combined flux in latest and established models = 1.16157 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 148 components and 1.16157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115373Jy sigma=0.000575 ! Fit after self-cal, rms=0.115377Jy sigma=0.000575 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115377Jy sigma=0.000575 ! Fit after self-cal, rms=0.115578Jy sigma=0.000574 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=13.55 mas, bpa=-10.21 degrees ! Estimated noise=7484.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.636856 Jy ! Component: 100 - total flux cleaned = 0.853759 Jy ! Component: 150 - total flux cleaned = 0.969924 Jy ! Component: 200 - total flux cleaned = 1.03636 Jy ! Total flux subtracted in 200 components = 1.03636 Jy ! Clean residual min=-0.022860 max=0.043627 Jy/beam ! Clean residual mean=0.000167 rms=0.010070 Jy/beam ! Combined flux in latest and established models = 1.03636 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 1.03636 Jy ! Inverting map and beam ! Estimated beam: bmin=4.378 mas, bmaj=15.37 mas, bpa=-6.77 degrees ! Estimated noise=5708.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563022 Jy ! Component: 100 - total flux cleaned = 0.0853219 Jy ! Component: 150 - total flux cleaned = 0.100777 Jy ! Component: 200 - total flux cleaned = 0.109577 Jy ! Total flux subtracted in 200 components = 0.109577 Jy ! Clean residual min=-0.013515 max=0.013830 Jy/beam ! Clean residual mean=0.000115 rms=0.004024 Jy/beam ! Combined flux in latest and established models = 1.14594 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 65 components and 1.14594 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.437 mas, bmaj=18.85 mas, bpa=-12.14 degrees ! Estimated noise=6592.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00850892 Jy ! Component: 100 - total flux cleaned = 0.0114621 Jy ! Component: 150 - total flux cleaned = 0.0115543 Jy ! Component: 200 - total flux cleaned = 0.0116481 Jy ! Total flux subtracted in 200 components = 0.0116481 Jy ! Clean residual min=-0.013760 max=0.015371 Jy/beam ! Clean residual mean=0.000153 rms=0.004386 Jy/beam ! Combined flux in latest and established models = 1.15759 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18707e-07 Jy ! Component: 100 - total flux cleaned = 9.28576e-05 Jy ! Component: 150 - total flux cleaned = 0.00017839 Jy ! Component: 200 - total flux cleaned = 0.000181074 Jy ! Total flux subtracted in 200 components = 0.000181074 Jy ! Clean residual min=-0.013818 max=0.015265 Jy/beam ! Clean residual mean=0.000151 rms=0.004340 Jy/beam ! Combined flux in latest and established models = 1.15777 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 1.15777 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.378 mas, bmaj=15.37 mas, bpa=-6.77 degrees ! Estimated noise=5708.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151317 Jy ! Component: 100 - total flux cleaned = -0.00166177 Jy ! Component: 150 - total flux cleaned = -0.00176526 Jy ! Component: 200 - total flux cleaned = -0.00176415 Jy ! Total flux subtracted in 200 components = -0.00176415 Jy ! Clean residual min=-0.011953 max=0.014254 Jy/beam ! Clean residual mean=0.000092 rms=0.003630 Jy/beam ! Combined flux in latest and established models = 1.156 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 89 components and 1.156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116536Jy sigma=0.000576 ! Fit after self-cal, rms=0.116519Jy sigma=0.000576 wmodel J1037-2934_S_2017_02_24_pus_map.mod ! Writing 89 model components to file: J1037-2934_S_2017_02_24_pus_map.mod wobs J1037-2934_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2017_02_24_pus_uvs.fits wwins J1037-2934_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J1037-2934_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442906 Jy ! Component: 100 - total flux cleaned = 0.00561934 Jy ! Component: 150 - total flux cleaned = 0.00716069 Jy ! Component: 200 - total flux cleaned = 0.00779392 Jy ! Component: 250 - total flux cleaned = 0.00749946 Jy ! Component: 300 - total flux cleaned = 0.00736008 Jy ! Component: 350 - total flux cleaned = 0.0070975 Jy ! Component: 400 - total flux cleaned = 0.00721543 Jy ! Component: 450 - total flux cleaned = 0.00744619 Jy ! Component: 500 - total flux cleaned = 0.00733746 Jy ! Component: 550 - total flux cleaned = 0.00766283 Jy ! Component: 600 - total flux cleaned = 0.0082687 Jy ! Component: 650 - total flux cleaned = 0.00884942 Jy ! Component: 700 - total flux cleaned = 0.00931502 Jy ! Component: 750 - total flux cleaned = 0.00967324 Jy ! Component: 800 - total flux cleaned = 0.00976101 Jy ! Component: 850 - total flux cleaned = 0.00984482 Jy ! Component: 900 - total flux cleaned = 0.0100063 Jy ! Component: 950 - total flux cleaned = 0.0100069 Jy ! Component: 1000 - total flux cleaned = 0.00978124 Jy ! Component: 1050 - total flux cleaned = 0.00978357 Jy ! Component: 1100 - total flux cleaned = 0.01007 Jy ! Component: 1150 - total flux cleaned = 0.0103463 Jy ! Component: 1200 - total flux cleaned = 0.0104807 Jy ! Component: 1250 - total flux cleaned = 0.0104801 Jy ! Component: 1300 - total flux cleaned = 0.0107983 Jy ! Component: 1350 - total flux cleaned = 0.010983 Jy ! Component: 1400 - total flux cleaned = 0.010922 Jy ! Component: 1450 - total flux cleaned = 0.0108058 Jy ! Component: 1500 - total flux cleaned = 0.0106924 Jy ! Component: 1550 - total flux cleaned = 0.0104104 Jy ! Component: 1600 - total flux cleaned = 0.0100781 Jy ! Component: 1650 - total flux cleaned = 0.00980738 Jy ! Component: 1700 - total flux cleaned = 0.00964657 Jy ! Component: 1750 - total flux cleaned = 0.00933134 Jy ! Component: 1800 - total flux cleaned = 0.00907365 Jy ! Component: 1850 - total flux cleaned = 0.008921 Jy ! Component: 1900 - total flux cleaned = 0.0086719 Jy ! Component: 1950 - total flux cleaned = 0.0086229 Jy ! Component: 2000 - total flux cleaned = 0.00842805 Jy ! Component: 2050 - total flux cleaned = 0.00818753 Jy ! Component: 2100 - total flux cleaned = 0.0080929 Jy ! Component: 2150 - total flux cleaned = 0.00785788 Jy ! Component: 2200 - total flux cleaned = 0.00776465 Jy ! Component: 2250 - total flux cleaned = 0.00744198 Jy ! Component: 2300 - total flux cleaned = 0.00725971 Jy ! Component: 2350 - total flux cleaned = 0.00689709 Jy ! Component: 2400 - total flux cleaned = 0.00653769 Jy ! Component: 2450 - total flux cleaned = 0.00631475 Jy ! Component: 2500 - total flux cleaned = 0.00595959 Jy ! Component: 2550 - total flux cleaned = 0.00578324 Jy ! Component: 2600 - total flux cleaned = 0.00551974 Jy ! Component: 2650 - total flux cleaned = 0.00534483 Jy ! Component: 2700 - total flux cleaned = 0.00521425 Jy ! Component: 2750 - total flux cleaned = 0.0049975 Jy ! Component: 2800 - total flux cleaned = 0.00482487 Jy ! Component: 2850 - total flux cleaned = 0.00456705 Jy ! Component: 2900 - total flux cleaned = 0.00435245 Jy ! Component: 2950 - total flux cleaned = 0.00426666 Jy ! Component: 3000 - total flux cleaned = 0.00413775 Jy ! Component: 3050 - total flux cleaned = 0.00392236 Jy ! Component: 3100 - total flux cleaned = 0.00387958 Jy ! Component: 3150 - total flux cleaned = 0.00387989 Jy ! Component: 3200 - total flux cleaned = 0.00401163 Jy ! Component: 3250 - total flux cleaned = 0.00409974 Jy ! Component: 3300 - total flux cleaned = 0.00409903 Jy ! Component: 3350 - total flux cleaned = 0.00423404 Jy ! Component: 3400 - total flux cleaned = 0.00423449 Jy ! Component: 3450 - total flux cleaned = 0.00423484 Jy ! Component: 3500 - total flux cleaned = 0.00423477 Jy ! Component: 3550 - total flux cleaned = 0.0042825 Jy ! Component: 3600 - total flux cleaned = 0.0043795 Jy ! Component: 3650 - total flux cleaned = 0.00442907 Jy ! Component: 3700 - total flux cleaned = 0.0046313 Jy ! Component: 3750 - total flux cleaned = 0.00473614 Jy ! Component: 3800 - total flux cleaned = 0.00478936 Jy ! Component: 3850 - total flux cleaned = 0.00489889 Jy ! Component: 3900 - total flux cleaned = 0.00489884 Jy ! Component: 3950 - total flux cleaned = 0.00507122 Jy ! Component: 4000 - total flux cleaned = 0.00507295 Jy ! Component: 4050 - total flux cleaned = 0.00507314 Jy ! Total flux subtracted in 4096 components = 0.00519799 Jy ! Clean residual min=-0.003307 max=0.003288 Jy/beam ! Clean residual mean=0.000047 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 1.1612 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 370 components and 1.1612 Jy ![Exited script file: muppet] wmap "J1037-2934_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.378 x 15.37 at -6.77 degrees (North through East) ! Clean map min=-0.0080359 max=0.86221 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.862212 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00119544 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.415946 0.415946 0.831891 1.66378 3.32757 6.65513 13.3103 26.6205 53.241 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.862 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.378 x 15.37 at -6.77 degrees (North through East) ! Clean map min=-0.0080359 max=0.86221 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:24:55 2019