! Started logfile: J1037-2934_S_2017_02_19_pus_uvs.log on Sat May 4 18:48:58 2019 obs J1037-2934_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1037-2934_S_2017_02_19_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.270899 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1037-2934 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 2048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2934_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 363 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.533218Jy sigma=0.003045 ! Fit after self-cal, rms=0.525431Jy sigma=0.003008 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=12.04 mas, bpa=18.6 degrees ! Estimated noise=3868.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.518451 Jy ! Component: 100 - total flux cleaned = 0.742537 Jy ! Total flux subtracted in 100 components = 0.742537 Jy ! Clean residual min=-0.048797 max=0.117260 Jy/beam ! Clean residual mean=0.000088 rms=0.021458 Jy/beam ! Combined flux in latest and established models = 0.742537 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.742537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330413Jy sigma=0.001858 ! Fit after self-cal, rms=0.329312Jy sigma=0.001855 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=13.52 mas, bpa=20.43 degrees ! Estimated noise=3091.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174051 Jy ! Component: 100 - total flux cleaned = 0.27208 Jy ! Component: 150 - total flux cleaned = 0.334242 Jy ! Component: 200 - total flux cleaned = 0.375619 Jy ! Total flux subtracted in 200 components = 0.375619 Jy ! Clean residual min=-0.029289 max=0.045212 Jy/beam ! Clean residual mean=-0.000046 rms=0.009656 Jy/beam ! Combined flux in latest and established models = 1.11816 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 93 components and 1.11816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219535Jy sigma=0.001108 ! Fit after self-cal, rms=0.219261Jy sigma=0.001107 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.96 HN 1.41 KP 1.04 ! LA 0.98 MK 1.00* NL 0.88 OV 1.00 ! PT 1.00* SC 0.85 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.42 KP 1.00 ! LA 0.96 MK 1.00* NL 1.02 OV 1.03 ! PT 1.00* SC 0.91 ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.01 HN 1.13 KP 0.87 ! LA 0.73 MK 1.00* NL 1.15 OV 0.94 ! PT 1.00* SC 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.89 KP 1.00* ! LA 0.81 MK 1.00* NL 1.00* OV 1.11 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.219261Jy sigma=0.001107 ! Fit after self-cal, rms=0.176644Jy sigma=0.000812 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=13.89 mas, bpa=20.89 degrees ! Estimated noise=3006.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0118177 Jy ! Component: 100 - total flux cleaned = -0.0140801 Jy ! Component: 150 - total flux cleaned = -0.015664 Jy ! Component: 200 - total flux cleaned = -0.0170591 Jy ! Total flux subtracted in 200 components = -0.0170591 Jy ! Clean residual min=-0.018681 max=0.015920 Jy/beam ! Clean residual mean=-0.000011 rms=0.005096 Jy/beam ! Combined flux in latest and established models = 1.1011 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 1.1011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174121Jy sigma=0.000799 ! Fit after self-cal, rms=0.174591Jy sigma=0.000798 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174591Jy sigma=0.000798 ! Fit after self-cal, rms=0.219723Jy sigma=0.000712 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=13.95 mas, bpa=20.59 degrees ! Estimated noise=3084.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0073773 Jy ! Component: 100 - total flux cleaned = -0.0109381 Jy ! Component: 150 - total flux cleaned = -0.0140819 Jy ! Component: 200 - total flux cleaned = -0.0157816 Jy ! Total flux subtracted in 200 components = -0.0157816 Jy ! Clean residual min=-0.017132 max=0.014093 Jy/beam ! Clean residual mean=-0.000020 rms=0.004913 Jy/beam ! Combined flux in latest and established models = 1.08532 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 114 components and 1.08532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215888Jy sigma=0.000695 ! Fit after self-cal, rms=0.216905Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.54958e-05 Jy ! Component: 100 - total flux cleaned = 2.7719e-05 Jy ! Component: 150 - total flux cleaned = 3.16469e-05 Jy ! Component: 200 - total flux cleaned = -0.000145295 Jy ! Total flux subtracted in 200 components = -0.000145295 Jy ! Clean residual min=-0.016229 max=0.013819 Jy/beam ! Clean residual mean=-0.000019 rms=0.004732 Jy/beam ! Combined flux in latest and established models = 1.08517 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 121 components and 1.08517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216172Jy sigma=0.000693 ! Fit after self-cal, rms=0.216148Jy sigma=0.000693 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216148Jy sigma=0.000693 ! Fit after self-cal, rms=0.247471Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=13.88 mas, bpa=20.46 degrees ! Estimated noise=3087.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164319 Jy ! Component: 100 - total flux cleaned = -0.00189036 Jy ! Component: 150 - total flux cleaned = -0.00202268 Jy ! Component: 200 - total flux cleaned = -0.00208142 Jy ! Total flux subtracted in 200 components = -0.00208142 Jy ! Clean residual min=-0.006209 max=0.007631 Jy/beam ! Clean residual mean=-0.000002 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 1.08309 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 128 components and 1.08309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247409Jy sigma=0.000642 ! Fit after self-cal, rms=0.247430Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766695 Jy ! Component: 100 - total flux cleaned = 0.0108154 Jy ! Component: 150 - total flux cleaned = 0.0131188 Jy ! Component: 200 - total flux cleaned = 0.0148858 Jy ! Total flux subtracted in 200 components = 0.0148858 Jy ! Clean residual min=-0.005476 max=0.005035 Jy/beam ! Clean residual mean=0.000003 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 1.09797 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 159 components and 1.09797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247058Jy sigma=0.000637 ! Fit after self-cal, rms=0.246946Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246946Jy sigma=0.000637 ! Fit after self-cal, rms=0.247476Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.232 mas, bmaj=19.17 mas, bpa=13.76 degrees ! Estimated noise=3676.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471622 Jy ! Component: 100 - total flux cleaned = 0.00750963 Jy ! Component: 150 - total flux cleaned = 0.00915705 Jy ! Component: 200 - total flux cleaned = 0.0104786 Jy ! Total flux subtracted in 200 components = 0.0104786 Jy ! Clean residual min=-0.004670 max=0.004379 Jy/beam ! Clean residual mean=0.000009 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 1.10845 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 204 components and 1.10845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247389Jy sigma=0.000635 ! Fit after self-cal, rms=0.247378Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175909 Jy ! Component: 100 - total flux cleaned = 0.00288154 Jy ! Component: 150 - total flux cleaned = 0.00387282 Jy ! Component: 200 - total flux cleaned = 0.00475806 Jy ! Total flux subtracted in 200 components = 0.00475806 Jy ! Clean residual min=-0.004149 max=0.003933 Jy/beam ! Clean residual mean=0.000011 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 1.11321 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 216 components and 1.11321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247322Jy sigma=0.000635 ! Fit after self-cal, rms=0.247304Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=13.88 mas, bpa=20.43 degrees ! Estimated noise=3085.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 13.88 at 20.43 degrees (North through East) ! Clean map min=-0.0048862 max=0.66622 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247304Jy sigma=0.000635 ! Fit after self-cal, rms=0.266440Jy sigma=0.000552 ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=13.88 mas, bpa=20.43 degrees ! Estimated noise=3083.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264493 Jy ! Component: 100 - total flux cleaned = 0.000367793 Jy ! Component: 150 - total flux cleaned = 0.000374149 Jy ! Component: 200 - total flux cleaned = 0.000208554 Jy ! Total flux subtracted in 200 components = 0.000208554 Jy ! Clean residual min=-0.005126 max=0.004751 Jy/beam ! Clean residual mean=0.000002 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 1.11342 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 240 components and 1.11342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266231Jy sigma=0.000551 ! Fit after self-cal, rms=0.266197Jy sigma=0.000551 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00035026 Jy ! Component: 100 - total flux cleaned = -0.00051043 Jy ! Component: 150 - total flux cleaned = -0.000585257 Jy ! Component: 200 - total flux cleaned = -0.000515995 Jy ! Total flux subtracted in 200 components = -0.000515995 Jy ! Clean residual min=-0.005113 max=0.004676 Jy/beam ! Clean residual mean=0.000002 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 1.1129 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 248 components and 1.1129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266050Jy sigma=0.000551 ! Fit after self-cal, rms=0.266044Jy sigma=0.000551 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266044Jy sigma=0.000551 ! Fit after self-cal, rms=0.264846Jy sigma=0.000551 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=12.24 mas, bpa=19.05 degrees ! Estimated noise=3954.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.534938 Jy ! Component: 100 - total flux cleaned = 0.765872 Jy ! Component: 150 - total flux cleaned = 0.889139 Jy ! Component: 200 - total flux cleaned = 0.960635 Jy ! Total flux subtracted in 200 components = 0.960635 Jy ! Clean residual min=-0.019178 max=0.036277 Jy/beam ! Clean residual mean=0.000040 rms=0.006037 Jy/beam ! Combined flux in latest and established models = 0.960635 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.960635 Jy ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=13.88 mas, bpa=20.41 degrees ! Estimated noise=3085.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513757 Jy ! Component: 100 - total flux cleaned = 0.0804945 Jy ! Component: 150 - total flux cleaned = 0.097523 Jy ! Component: 200 - total flux cleaned = 0.108968 Jy ! Total flux subtracted in 200 components = 0.108968 Jy ! Clean residual min=-0.009636 max=0.008216 Jy/beam ! Clean residual mean=0.000003 rms=0.002374 Jy/beam ! Combined flux in latest and established models = 1.0696 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 84 components and 1.0696 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.233 mas, bmaj=19.17 mas, bpa=13.75 degrees ! Estimated noise=3674.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126458 Jy ! Component: 100 - total flux cleaned = 0.021473 Jy ! Component: 150 - total flux cleaned = 0.0280529 Jy ! Component: 200 - total flux cleaned = 0.0331794 Jy ! Total flux subtracted in 200 components = 0.0331794 Jy ! Clean residual min=-0.005521 max=0.005617 Jy/beam ! Clean residual mean=0.000002 rms=0.001764 Jy/beam ! Combined flux in latest and established models = 1.10278 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420087 Jy ! Component: 100 - total flux cleaned = 0.00621965 Jy ! Component: 150 - total flux cleaned = 0.00812521 Jy ! Component: 200 - total flux cleaned = 0.00970002 Jy ! Total flux subtracted in 200 components = 0.00970002 Jy ! Clean residual min=-0.005026 max=0.004665 Jy/beam ! Clean residual mean=0.000004 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 1.11248 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 152 components and 1.11248 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=13.88 mas, bpa=20.41 degrees ! Estimated noise=3085.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000910487 Jy ! Component: 100 - total flux cleaned = -0.000485325 Jy ! Component: 150 - total flux cleaned = -0.000315802 Jy ! Component: 200 - total flux cleaned = 5.84609e-06 Jy ! Total flux subtracted in 200 components = 5.84609e-06 Jy ! Clean residual min=-0.005974 max=0.005928 Jy/beam ! Clean residual mean=0.000003 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 1.11249 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 176 components and 1.11249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265398Jy sigma=0.000556 ! Fit after self-cal, rms=0.265672Jy sigma=0.000555 wmodel J1037-2934_S_2017_02_19_pus_map.mod ! Writing 176 model components to file: J1037-2934_S_2017_02_19_pus_map.mod wobs J1037-2934_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1037-2934_S_2017_02_19_pus_uvs.fits wwins J1037-2934_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J1037-2934_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108785 Jy ! Component: 100 - total flux cleaned = -0.00186886 Jy ! Component: 150 - total flux cleaned = -0.00259092 Jy ! Component: 200 - total flux cleaned = -0.00302416 Jy ! Component: 250 - total flux cleaned = -0.00318822 Jy ! Component: 300 - total flux cleaned = -0.00318777 Jy ! Component: 350 - total flux cleaned = -0.00303244 Jy ! Component: 400 - total flux cleaned = -0.00288237 Jy ! Component: 450 - total flux cleaned = -0.00259253 Jy ! Component: 500 - total flux cleaned = -0.00252374 Jy ! Component: 550 - total flux cleaned = -0.00266211 Jy ! Component: 600 - total flux cleaned = -0.00252665 Jy ! Component: 650 - total flux cleaned = -0.00239447 Jy ! Component: 700 - total flux cleaned = -0.00246007 Jy ! Component: 750 - total flux cleaned = -0.00226816 Jy ! Component: 800 - total flux cleaned = -0.00226862 Jy ! Component: 850 - total flux cleaned = -0.00220608 Jy ! Component: 900 - total flux cleaned = -0.00208492 Jy ! Component: 950 - total flux cleaned = -0.00220446 Jy ! Component: 1000 - total flux cleaned = -0.00261187 Jy ! Component: 1050 - total flux cleaned = -0.00272541 Jy ! Component: 1100 - total flux cleaned = -0.0025548 Jy ! Component: 1150 - total flux cleaned = -0.00266841 Jy ! Component: 1200 - total flux cleaned = -0.00277923 Jy ! Component: 1250 - total flux cleaned = -0.00294297 Jy ! Component: 1300 - total flux cleaned = -0.00315841 Jy ! Component: 1350 - total flux cleaned = -0.00310599 Jy ! Component: 1400 - total flux cleaned = -0.0031059 Jy ! Component: 1450 - total flux cleaned = -0.00305459 Jy ! Component: 1500 - total flux cleaned = -0.00300333 Jy ! Component: 1550 - total flux cleaned = -0.00300328 Jy ! Component: 1600 - total flux cleaned = -0.00285249 Jy ! Component: 1650 - total flux cleaned = -0.00290215 Jy ! Component: 1700 - total flux cleaned = -0.00290204 Jy ! Component: 1750 - total flux cleaned = -0.00285361 Jy ! Component: 1800 - total flux cleaned = -0.00285407 Jy ! Component: 1850 - total flux cleaned = -0.0028542 Jy ! Component: 1900 - total flux cleaned = -0.00280684 Jy ! Component: 1950 - total flux cleaned = -0.00276014 Jy ! Component: 2000 - total flux cleaned = -0.0027603 Jy ! Component: 2050 - total flux cleaned = -0.00280675 Jy ! Component: 2100 - total flux cleaned = -0.00276073 Jy ! Component: 2150 - total flux cleaned = -0.00276088 Jy ! Component: 2200 - total flux cleaned = -0.00267053 Jy ! Component: 2250 - total flux cleaned = -0.00267034 Jy ! Component: 2300 - total flux cleaned = -0.00258133 Jy ! Component: 2350 - total flux cleaned = -0.00253734 Jy ! Component: 2400 - total flux cleaned = -0.00240589 Jy ! Component: 2450 - total flux cleaned = -0.00218861 Jy ! Component: 2500 - total flux cleaned = -0.00214558 Jy ! Component: 2550 - total flux cleaned = -0.00188883 Jy ! Component: 2600 - total flux cleaned = -0.00167631 Jy ! Component: 2650 - total flux cleaned = -0.00155007 Jy ! Component: 2700 - total flux cleaned = -0.0014246 Jy ! Component: 2750 - total flux cleaned = -0.00129945 Jy ! Component: 2800 - total flux cleaned = -0.00117516 Jy ! Component: 2850 - total flux cleaned = -0.00113368 Jy ! Component: 2900 - total flux cleaned = -0.00101076 Jy ! Component: 2950 - total flux cleaned = -0.000766434 Jy ! Component: 3000 - total flux cleaned = -0.000685514 Jy ! Component: 3050 - total flux cleaned = -0.000565142 Jy ! Component: 3100 - total flux cleaned = -0.000484855 Jy ! Component: 3150 - total flux cleaned = -0.000564648 Jy ! Component: 3200 - total flux cleaned = -0.000445752 Jy ! Component: 3250 - total flux cleaned = -0.000524365 Jy ! Component: 3300 - total flux cleaned = -0.000328276 Jy ! Component: 3350 - total flux cleaned = -0.000367484 Jy ! Component: 3400 - total flux cleaned = -0.000328252 Jy ! Component: 3450 - total flux cleaned = -0.000135213 Jy ! Component: 3500 - total flux cleaned = -0.000211734 Jy ! Component: 3550 - total flux cleaned = -2.03225e-05 Jy ! Component: 3600 - total flux cleaned = 1.76781e-05 Jy ! Component: 3650 - total flux cleaned = 1.76118e-05 Jy ! Component: 3700 - total flux cleaned = -1.98896e-05 Jy ! Component: 3750 - total flux cleaned = 0.000205473 Jy ! Component: 3800 - total flux cleaned = 0.000317397 Jy ! Component: 3850 - total flux cleaned = 0.000391826 Jy ! Component: 3900 - total flux cleaned = 0.000614651 Jy ! Component: 3950 - total flux cleaned = 0.000577534 Jy ! Component: 4000 - total flux cleaned = 0.00079795 Jy ! Component: 4050 - total flux cleaned = 0.00101743 Jy ! Total flux subtracted in 4096 components = 0.000871669 Jy ! Clean residual min=-0.002395 max=0.002172 Jy/beam ! Clean residual mean=0.000005 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 1.11336 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 468 components and 1.11336 Jy ![Exited script file: muppet] wmap "J1037-2934_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 13.88 at 20.41 degrees (North through East) ! Clean map min=-0.0052146 max=0.66055 Jy/beam ! Writing clean map to FITS file: J1037-2934_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.660548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000695945 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.316076 0.316076 0.632153 1.26431 2.52861 5.05722 10.1144 20.2289 40.4578 80.9156 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.66 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.425 x 13.88 at 20.41 degrees (North through East) ! Clean map min=-0.0052146 max=0.66055 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2934_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:49:03 2019