! Started logfile: J1037-2705_S_2017_08_12_pus_uvs.log on Fri May 10 14:57:45 2019 obs J1037-2705_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1037-2705_S_2017_08_12_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.767063 visibilities/baseline/integration-bin. ! Found source: J1037-2705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 7732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2705_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.899271Jy sigma=0.006207 ! Fit after self-cal, rms=0.879129Jy sigma=0.006081 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.405 mas, bmaj=6.815 mas, bpa=-6.107 degrees ! Estimated noise=1958.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0986569 Jy ! Component: 100 - total flux cleaned = 0.120282 Jy ! Total flux subtracted in 100 components = 0.120282 Jy ! Clean residual min=-0.007556 max=0.010662 Jy/beam ! Clean residual mean=-0.000040 rms=0.001851 Jy/beam ! Combined flux in latest and established models = 0.120282 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.120282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104789Jy sigma=0.000675 ! Fit after self-cal, rms=0.104776Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.861 mas, bmaj=7.981 mas, bpa=-5.382 degrees ! Estimated noise=1358.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101005 Jy ! Component: 100 - total flux cleaned = 0.015375 Jy ! Component: 150 - total flux cleaned = 0.0175865 Jy ! Component: 200 - total flux cleaned = 0.0184245 Jy ! Total flux subtracted in 200 components = 0.0184245 Jy ! Clean residual min=-0.004322 max=0.005363 Jy/beam ! Clean residual mean=-0.000019 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.138707 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.138707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103809Jy sigma=0.000668 ! Fit after self-cal, rms=0.103795Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.15 KP 1.03 ! LA 0.97 MK 1.01 NL 0.93 OV 0.97 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.19 KP 1.01 ! LA 0.95 MK 1.03 NL 1.05 OV 1.01 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.22 KP 0.98 ! LA 0.94 MK 1.00 NL 0.91 OV 1.00 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.82 KP 1.00* ! LA 1.00* MK 1.09 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.103795Jy sigma=0.000667 ! Fit after self-cal, rms=0.107648Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.927 mas, bpa=-4.696 degrees ! Estimated noise=1368.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000610976 Jy ! Component: 100 - total flux cleaned = -0.000618065 Jy ! Component: 150 - total flux cleaned = -0.000746739 Jy ! Component: 200 - total flux cleaned = -0.000803144 Jy ! Total flux subtracted in 200 components = -0.000803144 Jy ! Clean residual min=-0.003950 max=0.004272 Jy/beam ! Clean residual mean=0.000004 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.137904 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.137904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107532Jy sigma=0.000665 ! Fit after self-cal, rms=0.107642Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107642Jy sigma=0.000665 ! Fit after self-cal, rms=0.109611Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.917 mas, bpa=-4.62 degrees ! Estimated noise=1372.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017831 Jy ! Component: 100 - total flux cleaned = -0.000125123 Jy ! Component: 150 - total flux cleaned = -0.000123848 Jy ! Component: 200 - total flux cleaned = -0.000124268 Jy ! Total flux subtracted in 200 components = -0.000124268 Jy ! Clean residual min=-0.003658 max=0.003670 Jy/beam ! Clean residual mean=0.000003 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.137779 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.137779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109554Jy sigma=0.000662 ! Fit after self-cal, rms=0.109601Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.92104e-05 Jy ! Component: 100 - total flux cleaned = -8.7975e-05 Jy ! Component: 150 - total flux cleaned = -0.000159336 Jy ! Component: 200 - total flux cleaned = -0.00015925 Jy ! Total flux subtracted in 200 components = -0.00015925 Jy ! Clean residual min=-0.003646 max=0.003655 Jy/beam ! Clean residual mean=0.000003 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.13762 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.13762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109568Jy sigma=0.000662 ! Fit after self-cal, rms=0.109565Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109565Jy sigma=0.000662 ! Fit after self-cal, rms=0.112134Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.912 mas, bpa=-4.603 degrees ! Estimated noise=1374.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.46699e-06 Jy ! Component: 100 - total flux cleaned = 4.83204e-05 Jy ! Component: 150 - total flux cleaned = 4.87259e-05 Jy ! Component: 200 - total flux cleaned = 1.89491e-05 Jy ! Total flux subtracted in 200 components = 1.89491e-05 Jy ! Clean residual min=-0.003514 max=0.003067 Jy/beam ! Clean residual mean=-0.000000 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.137639 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 0.137639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112105Jy sigma=0.000661 ! Fit after self-cal, rms=0.112151Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.12725e-05 Jy ! Component: 100 - total flux cleaned = -5.86785e-05 Jy ! Component: 150 - total flux cleaned = -5.8893e-05 Jy ! Component: 200 - total flux cleaned = -8.3349e-05 Jy ! Total flux subtracted in 200 components = -8.3349e-05 Jy ! Clean residual min=-0.003487 max=0.003054 Jy/beam ! Clean residual mean=-0.000000 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.137556 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 104 components and 0.137556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112133Jy sigma=0.000661 ! Fit after self-cal, rms=0.112131Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112131Jy sigma=0.000661 ! Fit after self-cal, rms=0.112908Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=20.57 mas, bpa=-1.365 degrees ! Estimated noise=1759.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410096 Jy ! Component: 100 - total flux cleaned = 0.000494689 Jy ! Component: 150 - total flux cleaned = 0.000567504 Jy ! Component: 200 - total flux cleaned = 0.000610276 Jy ! Total flux subtracted in 200 components = 0.000610276 Jy ! Clean residual min=-0.003402 max=0.003173 Jy/beam ! Clean residual mean=0.000002 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.138166 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 111 components and 0.138166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112903Jy sigma=0.000661 ! Fit after self-cal, rms=0.112902Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163417 Jy ! Component: 100 - total flux cleaned = 0.000223877 Jy ! Component: 150 - total flux cleaned = 0.000242246 Jy ! Component: 200 - total flux cleaned = 0.000275858 Jy ! Total flux subtracted in 200 components = 0.000275858 Jy ! Clean residual min=-0.003366 max=0.003141 Jy/beam ! Clean residual mean=0.000003 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 0.138442 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 118 components and 0.138442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112904Jy sigma=0.000661 ! Fit after self-cal, rms=0.112898Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.912 mas, bpa=-4.624 degrees ! Estimated noise=1376.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 7.912 at -4.624 degrees (North through East) ! Clean map min=-0.0059522 max=0.12329 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.429 mas, bmaj=6.727 mas, bpa=-5.368 degrees ! Estimated noise=1992.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.099471 Jy ! Component: 100 - total flux cleaned = 0.121397 Jy ! Component: 150 - total flux cleaned = 0.128843 Jy ! Component: 200 - total flux cleaned = 0.131237 Jy ! Total flux subtracted in 200 components = 0.131237 Jy ! Clean residual min=-0.005499 max=0.005067 Jy/beam ! Clean residual mean=-0.000011 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.131237 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.131237 Jy ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.912 mas, bpa=-4.624 degrees ! Estimated noise=1376.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405914 Jy ! Component: 100 - total flux cleaned = 0.00494788 Jy ! Component: 150 - total flux cleaned = 0.00526382 Jy ! Component: 200 - total flux cleaned = 0.0054025 Jy ! Total flux subtracted in 200 components = 0.0054025 Jy ! Clean residual min=-0.003674 max=0.003510 Jy/beam ! Clean residual mean=-0.000002 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.136639 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 36 components and 0.136639 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=20.57 mas, bpa=-1.365 degrees ! Estimated noise=1759.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115301 Jy ! Component: 100 - total flux cleaned = 0.00127616 Jy ! Component: 150 - total flux cleaned = 0.0013784 Jy ! Component: 200 - total flux cleaned = 0.00146538 Jy ! Total flux subtracted in 200 components = 0.00146538 Jy ! Clean residual min=-0.003544 max=0.003271 Jy/beam ! Clean residual mean=0.000002 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.138105 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.42121e-05 Jy ! Component: 100 - total flux cleaned = 9.76157e-05 Jy ! Component: 150 - total flux cleaned = 0.000138545 Jy ! Component: 200 - total flux cleaned = 0.000158824 Jy ! Total flux subtracted in 200 components = 0.000158824 Jy ! Clean residual min=-0.003501 max=0.003250 Jy/beam ! Clean residual mean=0.000002 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.138263 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 64 components and 0.138263 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.912 mas, bpa=-4.624 degrees ! Estimated noise=1376.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00057656 Jy ! Component: 100 - total flux cleaned = -0.000578253 Jy ! Component: 150 - total flux cleaned = -0.000532382 Jy ! Component: 200 - total flux cleaned = -0.000446705 Jy ! Total flux subtracted in 200 components = -0.000446705 Jy ! Clean residual min=-0.003533 max=0.003241 Jy/beam ! Clean residual mean=0.000000 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.137817 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.137817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112973Jy sigma=0.000661 ! Fit after self-cal, rms=0.112954Jy sigma=0.000661 wmodel J1037-2705_S_2017_08_12_pus_map.mod ! Writing 77 model components to file: J1037-2705_S_2017_08_12_pus_map.mod wobs J1037-2705_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1037-2705_S_2017_08_12_pus_uvs.fits wwins J1037-2705_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1037-2705_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011479 Jy ! Component: 100 - total flux cleaned = -0.00160296 Jy ! Component: 150 - total flux cleaned = -0.00202915 Jy ! Component: 200 - total flux cleaned = -0.00228178 Jy ! Component: 250 - total flux cleaned = -0.00237975 Jy ! Component: 300 - total flux cleaned = -0.00261239 Jy ! Component: 350 - total flux cleaned = -0.00292887 Jy ! Component: 400 - total flux cleaned = -0.00310489 Jy ! Component: 450 - total flux cleaned = -0.00327575 Jy ! Component: 500 - total flux cleaned = -0.00348454 Jy ! Component: 550 - total flux cleaned = -0.00372847 Jy ! Component: 600 - total flux cleaned = -0.00396661 Jy ! Component: 650 - total flux cleaned = -0.00420025 Jy ! Component: 700 - total flux cleaned = -0.00439069 Jy ! Component: 750 - total flux cleaned = -0.00461581 Jy ! Component: 800 - total flux cleaned = -0.00483602 Jy ! Component: 850 - total flux cleaned = -0.0049439 Jy ! Component: 900 - total flux cleaned = -0.00508592 Jy ! Component: 950 - total flux cleaned = -0.00526009 Jy ! Component: 1000 - total flux cleaned = -0.00536315 Jy ! Component: 1050 - total flux cleaned = -0.0055324 Jy ! Component: 1100 - total flux cleaned = -0.00556594 Jy ! Component: 1150 - total flux cleaned = -0.00569778 Jy ! Component: 1200 - total flux cleaned = -0.00592444 Jy ! Component: 1250 - total flux cleaned = -0.00595636 Jy ! Component: 1300 - total flux cleaned = -0.00611366 Jy ! Component: 1350 - total flux cleaned = -0.00617585 Jy ! Component: 1400 - total flux cleaned = -0.00629885 Jy ! Component: 1450 - total flux cleaned = -0.00645 Jy ! Component: 1500 - total flux cleaned = -0.00644973 Jy ! Component: 1550 - total flux cleaned = -0.00650933 Jy ! Component: 1600 - total flux cleaned = -0.00662613 Jy ! Component: 1650 - total flux cleaned = -0.00671264 Jy ! Component: 1700 - total flux cleaned = -0.00685491 Jy ! Component: 1750 - total flux cleaned = -0.00691145 Jy ! Component: 1800 - total flux cleaned = -0.00688416 Jy ! Component: 1850 - total flux cleaned = -0.0069941 Jy ! Component: 1900 - total flux cleaned = -0.00707571 Jy ! Component: 1950 - total flux cleaned = -0.0071022 Jy ! Component: 2000 - total flux cleaned = -0.0070757 Jy ! Component: 2050 - total flux cleaned = -0.00707524 Jy ! Component: 2100 - total flux cleaned = -0.00702312 Jy ! Component: 2150 - total flux cleaned = -0.00702349 Jy ! Component: 2200 - total flux cleaned = -0.00704852 Jy ! Component: 2250 - total flux cleaned = -0.00689706 Jy ! Component: 2300 - total flux cleaned = -0.00699726 Jy ! Component: 2350 - total flux cleaned = -0.00692296 Jy ! Component: 2400 - total flux cleaned = -0.00687366 Jy ! Component: 2450 - total flux cleaned = -0.00680054 Jy ! Component: 2500 - total flux cleaned = -0.00677639 Jy ! Component: 2550 - total flux cleaned = -0.00672867 Jy ! Component: 2600 - total flux cleaned = -0.00670477 Jy ! Component: 2650 - total flux cleaned = -0.0066109 Jy ! Component: 2700 - total flux cleaned = -0.00663428 Jy ! Component: 2750 - total flux cleaned = -0.00665719 Jy ! Component: 2800 - total flux cleaned = -0.00656582 Jy ! Component: 2850 - total flux cleaned = -0.00656575 Jy ! Component: 2900 - total flux cleaned = -0.00656575 Jy ! Component: 2950 - total flux cleaned = -0.0064984 Jy ! Component: 3000 - total flux cleaned = -0.00640958 Jy ! Component: 3050 - total flux cleaned = -0.00638783 Jy ! Component: 3100 - total flux cleaned = -0.00636614 Jy ! Component: 3150 - total flux cleaned = -0.00625763 Jy ! Component: 3200 - total flux cleaned = -0.0063006 Jy ! Component: 3250 - total flux cleaned = -0.00625784 Jy ! Component: 3300 - total flux cleaned = -0.00625785 Jy ! Component: 3350 - total flux cleaned = -0.00619477 Jy ! Component: 3400 - total flux cleaned = -0.00627847 Jy ! Component: 3450 - total flux cleaned = -0.00621582 Jy ! Component: 3500 - total flux cleaned = -0.00621568 Jy ! Component: 3550 - total flux cleaned = -0.00615413 Jy ! Component: 3600 - total flux cleaned = -0.00611341 Jy ! Component: 3650 - total flux cleaned = -0.00615379 Jy ! Component: 3700 - total flux cleaned = -0.0060328 Jy ! Component: 3750 - total flux cleaned = -0.00601296 Jy ! Component: 3800 - total flux cleaned = -0.00599319 Jy ! Component: 3850 - total flux cleaned = -0.00595377 Jy ! Component: 3900 - total flux cleaned = -0.00585547 Jy ! Component: 3950 - total flux cleaned = -0.00583605 Jy ! Component: 4000 - total flux cleaned = -0.00577772 Jy ! Component: 4050 - total flux cleaned = -0.00571966 Jy ! Total flux subtracted in 4096 components = -0.00575806 Jy ! Clean residual min=-0.001177 max=0.001063 Jy/beam ! Clean residual mean=-0.000004 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.132059 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 358 components and 0.132059 Jy ![Exited script file: muppet] wmap "J1037-2705_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 7.912 at -4.624 degrees (North through East) ! Clean map min=-0.0043424 max=0.12485 Jy/beam ! Writing clean map to FITS file: J1037-2705_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.124849 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000342126 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.822097 0.822097 1.64419 3.28839 6.57678 13.1536 26.3071 52.6142 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.124 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.89 x 7.912 at -4.624 degrees (North through East) ! Clean map min=-0.0043424 max=0.12485 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1037-2705_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:57:50 2019