! Started logfile: J1036-3744_S_2017_10_21_pus_uvs.log on Sat May 11 20:56:21 2019 obs J1036-3744_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_10_21_pus_uva.fits ! AN table 1: 25 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.543333 visibilities/baseline/integration-bin. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.687270Jy sigma=0.004968 ! Fit after self-cal, rms=0.678508Jy sigma=0.004904 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.816 mas, bmaj=17.87 mas, bpa=-27.4 degrees ! Estimated noise=3086.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249936 Jy ! Component: 100 - total flux cleaned = 0.331189 Jy ! Total flux subtracted in 100 components = 0.331189 Jy ! Clean residual min=-0.023529 max=0.031198 Jy/beam ! Clean residual mean=0.000050 rms=0.006827 Jy/beam ! Combined flux in latest and established models = 0.331189 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.331189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143706Jy sigma=0.000958 ! Fit after self-cal, rms=0.143510Jy sigma=0.000956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=20.09 mas, bpa=-26.87 degrees ! Estimated noise=2692.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442052 Jy ! Component: 100 - total flux cleaned = 0.0639644 Jy ! Component: 150 - total flux cleaned = 0.0739112 Jy ! Component: 200 - total flux cleaned = 0.0752095 Jy ! Total flux subtracted in 200 components = 0.0752095 Jy ! Clean residual min=-0.013258 max=0.021264 Jy/beam ! Clean residual mean=0.000087 rms=0.004844 Jy/beam ! Combined flux in latest and established models = 0.406398 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 61 components and 0.406398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128817Jy sigma=0.000880 ! Fit after self-cal, rms=0.128803Jy sigma=0.000880 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.45 ! LA 0.97 MK 0.94 NL 1.00* OV 0.93 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.03 ! LA 0.96 MK 1.02 NL 1.06 OV 0.97 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.03 ! LA 0.76 MK 1.04 NL 1.24 OV 0.85 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.00* KP 1.00* ! LA 1.14 MK 1.00 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.128803Jy sigma=0.000880 ! Fit after self-cal, rms=0.115726Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.425 mas, bmaj=19.86 mas, bpa=-26.99 degrees ! Estimated noise=2703.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899655 Jy ! Component: 100 - total flux cleaned = 0.000915866 Jy ! Component: 150 - total flux cleaned = 0.000918923 Jy ! Component: 200 - total flux cleaned = 0.000919213 Jy ! Total flux subtracted in 200 components = 0.000919213 Jy ! Clean residual min=-0.011266 max=0.010999 Jy/beam ! Clean residual mean=0.000173 rms=0.003110 Jy/beam ! Combined flux in latest and established models = 0.407318 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.407318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115384Jy sigma=0.000770 ! Fit after self-cal, rms=0.115445Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115445Jy sigma=0.000769 ! Fit after self-cal, rms=0.115609Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=19.87 mas, bpa=-26.97 degrees ! Estimated noise=2705.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.60743e-05 Jy ! Component: 100 - total flux cleaned = 0.000179894 Jy ! Component: 150 - total flux cleaned = 0.000180639 Jy ! Component: 200 - total flux cleaned = 0.000179104 Jy ! Total flux subtracted in 200 components = 0.000179104 Jy ! Clean residual min=-0.010821 max=0.010867 Jy/beam ! Clean residual mean=0.000171 rms=0.003095 Jy/beam ! Combined flux in latest and established models = 0.407497 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.407497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115376Jy sigma=0.000768 ! Fit after self-cal, rms=0.115369Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164422 Jy ! Component: 100 - total flux cleaned = 0.000162812 Jy ! Component: 150 - total flux cleaned = 0.000249639 Jy ! Component: 200 - total flux cleaned = 0.000249375 Jy ! Total flux subtracted in 200 components = 0.000249375 Jy ! Clean residual min=-0.010746 max=0.010921 Jy/beam ! Clean residual mean=0.000173 rms=0.003073 Jy/beam ! Combined flux in latest and established models = 0.407746 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.407746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115216Jy sigma=0.000767 ! Fit after self-cal, rms=0.115215Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115215Jy sigma=0.000767 ! Fit after self-cal, rms=0.112848Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=20.11 mas, bpa=-26.81 degrees ! Estimated noise=2718.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213787 Jy ! Component: 100 - total flux cleaned = -0.00206542 Jy ! Component: 150 - total flux cleaned = -0.00206138 Jy ! Component: 200 - total flux cleaned = -0.00206182 Jy ! Total flux subtracted in 200 components = -0.00206182 Jy ! Clean residual min=-0.006694 max=0.006173 Jy/beam ! Clean residual mean=0.000046 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.405684 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 104 components and 0.405684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112743Jy sigma=0.000722 ! Fit after self-cal, rms=0.112878Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.18538e-05 Jy ! Component: 100 - total flux cleaned = 2.07291e-06 Jy ! Component: 150 - total flux cleaned = 1.69372e-06 Jy ! Component: 200 - total flux cleaned = 5.22028e-05 Jy ! Total flux subtracted in 200 components = 5.22028e-05 Jy ! Clean residual min=-0.006643 max=0.006102 Jy/beam ! Clean residual mean=0.000048 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.405737 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 109 components and 0.405736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112822Jy sigma=0.000721 ! Fit after self-cal, rms=0.112827Jy sigma=0.000721 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112827Jy sigma=0.000721 ! Fit after self-cal, rms=0.113138Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.14 mas, bmaj=36.94 mas, bpa=-13.41 degrees ! Estimated noise=3268.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000942525 Jy ! Component: 100 - total flux cleaned = -0.00085809 Jy ! Component: 150 - total flux cleaned = -0.000786209 Jy ! Component: 200 - total flux cleaned = -0.000754221 Jy ! Total flux subtracted in 200 components = -0.000754221 Jy ! Clean residual min=-0.005300 max=0.004986 Jy/beam ! Clean residual mean=0.000071 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.404982 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.404982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113111Jy sigma=0.000721 ! Fit after self-cal, rms=0.113117Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000287036 Jy ! Component: 100 - total flux cleaned = -0.000257129 Jy ! Component: 150 - total flux cleaned = -0.000229563 Jy ! Component: 200 - total flux cleaned = -0.000202461 Jy ! Total flux subtracted in 200 components = -0.000202461 Jy ! Clean residual min=-0.005214 max=0.004922 Jy/beam ! Clean residual mean=0.000070 rms=0.001692 Jy/beam ! Combined flux in latest and established models = 0.40478 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 130 components and 0.40478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113106Jy sigma=0.000720 ! Fit after self-cal, rms=0.113106Jy sigma=0.000720 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=20.15 mas, bpa=-26.77 degrees ! Estimated noise=2720.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.454 x 20.15 at -26.77 degrees (North through East) ! Clean map min=-0.0062118 max=0.29559 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=18.15 mas, bpa=-27.36 degrees ! Estimated noise=3148.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254256 Jy ! Component: 100 - total flux cleaned = 0.335871 Jy ! Component: 150 - total flux cleaned = 0.366815 Jy ! Component: 200 - total flux cleaned = 0.382977 Jy ! Total flux subtracted in 200 components = 0.382977 Jy ! Clean residual min=-0.010416 max=0.011338 Jy/beam ! Clean residual mean=-0.000050 rms=0.002715 Jy/beam ! Combined flux in latest and established models = 0.382977 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.382977 Jy ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=20.15 mas, bpa=-26.77 degrees ! Estimated noise=2720.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126651 Jy ! Component: 100 - total flux cleaned = 0.0192896 Jy ! Component: 150 - total flux cleaned = 0.023203 Jy ! Component: 200 - total flux cleaned = 0.0242665 Jy ! Total flux subtracted in 200 components = 0.0242665 Jy ! Clean residual min=-0.006398 max=0.006082 Jy/beam ! Clean residual mean=0.000055 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.407243 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 86 components and 0.407243 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.14 mas, bmaj=36.94 mas, bpa=-13.41 degrees ! Estimated noise=3268.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526318 Jy ! Component: 100 - total flux cleaned = 0.000853054 Jy ! Component: 150 - total flux cleaned = 0.00091883 Jy ! Component: 200 - total flux cleaned = 0.00104211 Jy ! Total flux subtracted in 200 components = 0.00104211 Jy ! Clean residual min=-0.005088 max=0.005077 Jy/beam ! Clean residual mean=0.000099 rms=0.001701 Jy/beam ! Combined flux in latest and established models = 0.408285 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.97899e-05 Jy ! Component: 100 - total flux cleaned = -0.000117582 Jy ! Component: 150 - total flux cleaned = -0.000171996 Jy ! Component: 200 - total flux cleaned = -0.000224099 Jy ! Total flux subtracted in 200 components = -0.000224099 Jy ! Clean residual min=-0.004969 max=0.004940 Jy/beam ! Clean residual mean=0.000095 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.408061 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.408061 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=20.15 mas, bpa=-26.77 degrees ! Estimated noise=2720.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000368744 Jy ! Component: 100 - total flux cleaned = -9.43739e-05 Jy ! Component: 150 - total flux cleaned = 0.000161679 Jy ! Component: 200 - total flux cleaned = 0.000321201 Jy ! Total flux subtracted in 200 components = 0.000321201 Jy ! Clean residual min=-0.006021 max=0.006012 Jy/beam ! Clean residual mean=0.000060 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.408382 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.408382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112918Jy sigma=0.000719 ! Fit after self-cal, rms=0.112913Jy sigma=0.000719 wmodel J1036-3744_S_2017_10_21_pus_map.mod ! Writing 123 model components to file: J1036-3744_S_2017_10_21_pus_map.mod wobs J1036-3744_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_10_21_pus_uvs.fits wwins J1036-3744_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1036-3744_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196461 Jy ! Component: 100 - total flux cleaned = 0.0011204 Jy ! Component: 150 - total flux cleaned = 0.00180672 Jy ! Component: 200 - total flux cleaned = 0.0019649 Jy ! Component: 250 - total flux cleaned = 0.00196448 Jy ! Component: 300 - total flux cleaned = 0.00189213 Jy ! Component: 350 - total flux cleaned = 0.00154723 Jy ! Component: 400 - total flux cleaned = 0.00121579 Jy ! Component: 450 - total flux cleaned = 0.00108776 Jy ! Component: 500 - total flux cleaned = 0.00108733 Jy ! Component: 550 - total flux cleaned = 0.000968989 Jy ! Component: 600 - total flux cleaned = 0.000911335 Jy ! Component: 650 - total flux cleaned = 0.000799478 Jy ! Component: 700 - total flux cleaned = 0.000799756 Jy ! Component: 750 - total flux cleaned = 0.000586041 Jy ! Component: 800 - total flux cleaned = 0.000744367 Jy ! Component: 850 - total flux cleaned = 0.000692923 Jy ! Component: 900 - total flux cleaned = 0.000693729 Jy ! Component: 950 - total flux cleaned = 0.000741497 Jy ! Component: 1000 - total flux cleaned = 0.000740613 Jy ! Component: 1050 - total flux cleaned = 0.000693086 Jy ! Component: 1100 - total flux cleaned = 0.000554671 Jy ! Component: 1150 - total flux cleaned = 0.000419516 Jy ! Component: 1200 - total flux cleaned = 0.000242671 Jy ! Component: 1250 - total flux cleaned = 0.000155056 Jy ! Component: 1300 - total flux cleaned = -5.72743e-05 Jy ! Component: 1350 - total flux cleaned = -5.66266e-05 Jy ! Component: 1400 - total flux cleaned = -5.65036e-05 Jy ! Component: 1450 - total flux cleaned = -1.61118e-05 Jy ! Component: 1500 - total flux cleaned = -1.57927e-05 Jy ! Component: 1550 - total flux cleaned = 6.28409e-05 Jy ! Component: 1600 - total flux cleaned = 0.000294622 Jy ! Component: 1650 - total flux cleaned = 0.000408647 Jy ! Component: 1700 - total flux cleaned = 0.000558293 Jy ! Component: 1750 - total flux cleaned = 0.000632344 Jy ! Component: 1800 - total flux cleaned = 0.000742049 Jy ! Component: 1850 - total flux cleaned = 0.000778426 Jy ! Component: 1900 - total flux cleaned = 0.000778286 Jy ! Component: 1950 - total flux cleaned = 0.00091879 Jy ! Component: 2000 - total flux cleaned = 0.000988127 Jy ! Component: 2050 - total flux cleaned = 0.000988293 Jy ! Component: 2100 - total flux cleaned = 0.00105559 Jy ! Component: 2150 - total flux cleaned = 0.00102219 Jy ! Component: 2200 - total flux cleaned = 0.00118688 Jy ! Component: 2250 - total flux cleaned = 0.00115403 Jy ! Component: 2300 - total flux cleaned = 0.00125028 Jy ! Component: 2350 - total flux cleaned = 0.00144209 Jy ! Component: 2400 - total flux cleaned = 0.0016959 Jy ! Component: 2450 - total flux cleaned = 0.00197907 Jy ! Component: 2500 - total flux cleaned = 0.00219782 Jy ! Component: 2550 - total flux cleaned = 0.00241501 Jy ! Component: 2600 - total flux cleaned = 0.00260009 Jy ! Component: 2650 - total flux cleaned = 0.00281499 Jy ! Component: 2700 - total flux cleaned = 0.00302848 Jy ! Component: 2750 - total flux cleaned = 0.00321083 Jy ! Component: 2800 - total flux cleaned = 0.00345253 Jy ! Component: 2850 - total flux cleaned = 0.00369315 Jy ! Component: 2900 - total flux cleaned = 0.0038731 Jy ! Component: 2950 - total flux cleaned = 0.00420195 Jy ! Component: 3000 - total flux cleaned = 0.00432127 Jy ! Component: 3050 - total flux cleaned = 0.00455908 Jy ! Component: 3100 - total flux cleaned = 0.00476664 Jy ! Component: 3150 - total flux cleaned = 0.00503297 Jy ! Component: 3200 - total flux cleaned = 0.00526925 Jy ! Component: 3250 - total flux cleaned = 0.00541648 Jy ! Component: 3300 - total flux cleaned = 0.00568117 Jy ! Component: 3350 - total flux cleaned = 0.00591588 Jy ! Component: 3400 - total flux cleaned = 0.00615049 Jy ! Component: 3450 - total flux cleaned = 0.00641427 Jy ! Component: 3500 - total flux cleaned = 0.00658996 Jy ! Component: 3550 - total flux cleaned = 0.00685338 Jy ! Component: 3600 - total flux cleaned = 0.00705852 Jy ! Component: 3650 - total flux cleaned = 0.00735132 Jy ! Component: 3700 - total flux cleaned = 0.00746864 Jy ! Component: 3750 - total flux cleaned = 0.00779128 Jy ! Component: 3800 - total flux cleaned = 0.00793815 Jy ! Component: 3850 - total flux cleaned = 0.00814379 Jy ! Component: 3900 - total flux cleaned = 0.00837931 Jy ! Component: 3950 - total flux cleaned = 0.00855586 Jy ! Component: 4000 - total flux cleaned = 0.00882095 Jy ! Component: 4050 - total flux cleaned = 0.00905699 Jy ! Total flux subtracted in 4096 components = 0.00929355 Jy ! Clean residual min=-0.001651 max=0.001679 Jy/beam ! Clean residual mean=0.000033 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.417676 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 398 components and 0.417676 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.454 x 20.15 at -26.77 degrees (North through East) ! Clean map min=-0.0037882 max=0.29637 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.296372 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000556537 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.56335 0.56335 1.1267 2.2534 4.5068 9.01359 18.0272 36.0544 72.1088 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.296 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.454 x 20.15 at -26.77 degrees (North through East) ! Clean map min=-0.0037882 max=0.29637 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:56:26 2019