! Started logfile: J1036-3744_S_2017_10_09_pus_uvs.log on Sun May 12 13:10:04 2019 obs J1036-3744_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_10_09_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.521368 visibilities/baseline/integration-bin. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.800885Jy sigma=0.005266 ! Fit after self-cal, rms=0.757889Jy sigma=0.004980 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=15.1 mas, bpa=-20.19 degrees ! Estimated noise=4763.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.194627 Jy ! Component: 100 - total flux cleaned = 0.2713 Jy ! Total flux subtracted in 100 components = 0.2713 Jy ! Clean residual min=-0.028272 max=0.039621 Jy/beam ! Clean residual mean=-0.000036 rms=0.008837 Jy/beam ! Combined flux in latest and established models = 0.2713 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.2713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138162Jy sigma=0.000834 ! Fit after self-cal, rms=0.137278Jy sigma=0.000828 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.72 mas, bmaj=15.81 mas, bpa=-19.92 degrees ! Estimated noise=3920.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0497601 Jy ! Component: 100 - total flux cleaned = 0.07812 Jy ! Component: 150 - total flux cleaned = 0.0961009 Jy ! Component: 200 - total flux cleaned = 0.107715 Jy ! Total flux subtracted in 200 components = 0.107715 Jy ! Clean residual min=-0.016764 max=0.016835 Jy/beam ! Clean residual mean=-0.000072 rms=0.004347 Jy/beam ! Combined flux in latest and established models = 0.379015 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 69 components and 0.379015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115970Jy sigma=0.000695 ! Fit after self-cal, rms=0.115766Jy sigma=0.000694 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.17 KP 1.10 ! LA 0.99 MK 1.01 NL 1.00 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.36 KP 0.93 ! LA 0.96 MK 1.06 NL 1.06 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.07 KP 0.89 ! LA 0.83 MK 1.02 NL 1.27 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.83 KP 1.00* ! LA 1.00* MK 1.04 NL 1.00* OV 1.00* ! PT 1.08 ! ! ! Fit before self-cal, rms=0.115766Jy sigma=0.000694 ! Fit after self-cal, rms=0.114064Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.758 mas, bmaj=16.1 mas, bpa=-20.25 degrees ! Estimated noise=4028.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00391607 Jy ! Component: 100 - total flux cleaned = -0.0043218 Jy ! Component: 150 - total flux cleaned = -0.00431867 Jy ! Component: 200 - total flux cleaned = -0.00422321 Jy ! Total flux subtracted in 200 components = -0.00422321 Jy ! Clean residual min=-0.011655 max=0.009747 Jy/beam ! Clean residual mean=-0.000008 rms=0.002619 Jy/beam ! Combined flux in latest and established models = 0.374792 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.374792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113716Jy sigma=0.000663 ! Fit after self-cal, rms=0.113954Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113954Jy sigma=0.000662 ! Fit after self-cal, rms=0.116414Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=16.29 mas, bpa=-20.47 degrees ! Estimated noise=4093.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00304861 Jy ! Component: 100 - total flux cleaned = -0.00338419 Jy ! Component: 150 - total flux cleaned = -0.00338673 Jy ! Component: 200 - total flux cleaned = -0.00331459 Jy ! Total flux subtracted in 200 components = -0.00331459 Jy ! Clean residual min=-0.011128 max=0.009310 Jy/beam ! Clean residual mean=-0.000005 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 0.371478 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.371478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116191Jy sigma=0.000661 ! Fit after self-cal, rms=0.116276Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016457 Jy ! Component: 100 - total flux cleaned = -0.000100992 Jy ! Component: 150 - total flux cleaned = -4.24375e-05 Jy ! Component: 200 - total flux cleaned = -4.2092e-05 Jy ! Total flux subtracted in 200 components = -4.2092e-05 Jy ! Clean residual min=-0.011006 max=0.009108 Jy/beam ! Clean residual mean=-0.000004 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.371436 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.371436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116196Jy sigma=0.000660 ! Fit after self-cal, rms=0.116229Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116229Jy sigma=0.000660 ! Fit after self-cal, rms=0.118838Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=16.47 mas, bpa=-20.67 degrees ! Estimated noise=4153.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200997 Jy ! Component: 100 - total flux cleaned = -0.00218322 Jy ! Component: 150 - total flux cleaned = -0.00231204 Jy ! Component: 200 - total flux cleaned = -0.00225283 Jy ! Total flux subtracted in 200 components = -0.00225283 Jy ! Clean residual min=-0.010519 max=0.008948 Jy/beam ! Clean residual mean=0.000000 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 0.369183 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.369183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118718Jy sigma=0.000659 ! Fit after self-cal, rms=0.118792Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.38759e-05 Jy ! Component: 100 - total flux cleaned = -1.53883e-05 Jy ! Component: 150 - total flux cleaned = 3.19037e-05 Jy ! Component: 200 - total flux cleaned = 7.75108e-05 Jy ! Total flux subtracted in 200 components = 7.75108e-05 Jy ! Clean residual min=-0.010444 max=0.008887 Jy/beam ! Clean residual mean=0.000001 rms=0.002439 Jy/beam ! Combined flux in latest and established models = 0.36926 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.36926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118745Jy sigma=0.000659 ! Fit after self-cal, rms=0.118769Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118769Jy sigma=0.000659 ! Fit after self-cal, rms=0.121009Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=38.71 mas, bpa=-6.368 degrees ! Estimated noise=5380.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00094228 Jy ! Component: 100 - total flux cleaned = -0.000879846 Jy ! Component: 150 - total flux cleaned = -0.000794123 Jy ! Component: 200 - total flux cleaned = -0.000767372 Jy ! Total flux subtracted in 200 components = -0.000767372 Jy ! Clean residual min=-0.011612 max=0.007341 Jy/beam ! Clean residual mean=0.000027 rms=0.002823 Jy/beam ! Combined flux in latest and established models = 0.368493 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 117 components and 0.368493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121006Jy sigma=0.000659 ! Fit after self-cal, rms=0.121031Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.13463e-05 Jy ! Component: 100 - total flux cleaned = 1.61541e-05 Jy ! Component: 150 - total flux cleaned = 4.3512e-05 Jy ! Component: 200 - total flux cleaned = 6.83718e-05 Jy ! Total flux subtracted in 200 components = 6.83718e-05 Jy ! Clean residual min=-0.011642 max=0.007269 Jy/beam ! Clean residual mean=0.000028 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.368561 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 119 components and 0.368561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121037Jy sigma=0.000659 ! Fit after self-cal, rms=0.121036Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=16.63 mas, bpa=-20.84 degrees ! Estimated noise=4201.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 16.63 at -20.84 degrees (North through East) ! Clean map min=-0.010468 max=0.23811 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.329 mas, bmaj=15.63 mas, bpa=-20.88 degrees ! Estimated noise=5253.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207718 Jy ! Component: 100 - total flux cleaned = 0.282094 Jy ! Component: 150 - total flux cleaned = 0.313367 Jy ! Component: 200 - total flux cleaned = 0.330634 Jy ! Total flux subtracted in 200 components = 0.330634 Jy ! Clean residual min=-0.015193 max=0.015451 Jy/beam ! Clean residual mean=-0.000019 rms=0.004001 Jy/beam ! Combined flux in latest and established models = 0.330634 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.330634 Jy ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=16.63 mas, bpa=-20.84 degrees ! Estimated noise=4201.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015896 Jy ! Component: 100 - total flux cleaned = 0.0247402 Jy ! Component: 150 - total flux cleaned = 0.0299395 Jy ! Component: 200 - total flux cleaned = 0.0326738 Jy ! Total flux subtracted in 200 components = 0.0326738 Jy ! Clean residual min=-0.011096 max=0.008782 Jy/beam ! Clean residual mean=-0.000013 rms=0.002587 Jy/beam ! Combined flux in latest and established models = 0.363308 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 56 components and 0.363308 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.846 mas, bmaj=38.71 mas, bpa=-6.368 degrees ! Estimated noise=5380.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298277 Jy ! Component: 100 - total flux cleaned = 0.00311516 Jy ! Component: 150 - total flux cleaned = 0.00305616 Jy ! Component: 200 - total flux cleaned = 0.00305657 Jy ! Total flux subtracted in 200 components = 0.00305657 Jy ! Clean residual min=-0.012189 max=0.007156 Jy/beam ! Clean residual mean=0.000001 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.366364 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.0693e-05 Jy ! Component: 100 - total flux cleaned = -5.15715e-05 Jy ! Component: 150 - total flux cleaned = -9.61454e-05 Jy ! Component: 200 - total flux cleaned = -9.5997e-05 Jy ! Total flux subtracted in 200 components = -9.5997e-05 Jy ! Clean residual min=-0.012130 max=0.007162 Jy/beam ! Clean residual mean=0.000004 rms=0.002815 Jy/beam ! Combined flux in latest and established models = 0.366268 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.366268 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=16.63 mas, bpa=-20.84 degrees ! Estimated noise=4201.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014175 Jy ! Component: 100 - total flux cleaned = -0.00124774 Jy ! Component: 150 - total flux cleaned = -0.00117411 Jy ! Component: 200 - total flux cleaned = -0.00104431 Jy ! Total flux subtracted in 200 components = -0.00104431 Jy ! Clean residual min=-0.010512 max=0.008499 Jy/beam ! Clean residual mean=-0.000007 rms=0.002488 Jy/beam ! Combined flux in latest and established models = 0.365224 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.365224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121229Jy sigma=0.000659 ! Fit after self-cal, rms=0.121165Jy sigma=0.000659 wmodel J1036-3744_S_2017_10_09_pus_map.mod ! Writing 89 model components to file: J1036-3744_S_2017_10_09_pus_map.mod wobs J1036-3744_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_10_09_pus_uvs.fits wwins J1036-3744_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1036-3744_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00377751 Jy ! Component: 100 - total flux cleaned = -0.00479046 Jy ! Component: 150 - total flux cleaned = -0.00568744 Jy ! Component: 200 - total flux cleaned = -0.00674141 Jy ! Component: 250 - total flux cleaned = -0.0076083 Jy ! Component: 300 - total flux cleaned = -0.00830634 Jy ! Component: 350 - total flux cleaned = -0.00886483 Jy ! Component: 400 - total flux cleaned = -0.00974812 Jy ! Component: 450 - total flux cleaned = -0.0106711 Jy ! Component: 500 - total flux cleaned = -0.01123 Jy ! Component: 550 - total flux cleaned = -0.0116878 Jy ! Component: 600 - total flux cleaned = -0.0121264 Jy ! Component: 650 - total flux cleaned = -0.0125452 Jy ! Component: 700 - total flux cleaned = -0.0129458 Jy ! Component: 750 - total flux cleaned = -0.0131358 Jy ! Component: 800 - total flux cleaned = -0.0133832 Jy ! Component: 850 - total flux cleaned = -0.0137422 Jy ! Component: 900 - total flux cleaned = -0.0140289 Jy ! Component: 950 - total flux cleaned = -0.0141932 Jy ! Component: 1000 - total flux cleaned = -0.0143535 Jy ! Component: 1050 - total flux cleaned = -0.0144562 Jy ! Component: 1100 - total flux cleaned = -0.0145055 Jy ! Component: 1150 - total flux cleaned = -0.0147992 Jy ! Component: 1200 - total flux cleaned = -0.0149899 Jy ! Component: 1250 - total flux cleaned = -0.0151308 Jy ! Component: 1300 - total flux cleaned = -0.0154504 Jy ! Component: 1350 - total flux cleaned = -0.0157162 Jy ! Component: 1400 - total flux cleaned = -0.0160223 Jy ! Component: 1450 - total flux cleaned = -0.0164502 Jy ! Component: 1500 - total flux cleaned = -0.0169957 Jy ! Component: 1550 - total flux cleaned = -0.0174082 Jy ! Component: 1600 - total flux cleaned = -0.0176925 Jy ! Component: 1650 - total flux cleaned = -0.0180138 Jy ! Component: 1700 - total flux cleaned = -0.0183692 Jy ! Component: 1750 - total flux cleaned = -0.0186027 Jy ! Component: 1800 - total flux cleaned = -0.0189105 Jy ! Component: 1850 - total flux cleaned = -0.0192147 Jy ! Component: 1900 - total flux cleaned = -0.0194408 Jy ! Component: 1950 - total flux cleaned = -0.0196642 Jy ! Component: 2000 - total flux cleaned = -0.0199221 Jy ! Component: 2050 - total flux cleaned = -0.0201417 Jy ! Component: 2100 - total flux cleaned = -0.020323 Jy ! Component: 2150 - total flux cleaned = -0.0205037 Jy ! Component: 2200 - total flux cleaned = -0.0205764 Jy ! Component: 2250 - total flux cleaned = -0.0206494 Jy ! Component: 2300 - total flux cleaned = -0.0207231 Jy ! Component: 2350 - total flux cleaned = -0.0207594 Jy ! Component: 2400 - total flux cleaned = -0.0208719 Jy ! Component: 2450 - total flux cleaned = -0.0209477 Jy ! Component: 2500 - total flux cleaned = -0.0210244 Jy ! Component: 2550 - total flux cleaned = -0.0211015 Jy ! Component: 2600 - total flux cleaned = -0.0212201 Jy ! Component: 2650 - total flux cleaned = -0.0213001 Jy ! Component: 2700 - total flux cleaned = -0.0214221 Jy ! Component: 2750 - total flux cleaned = -0.0215471 Jy ! Component: 2800 - total flux cleaned = -0.0216318 Jy ! Component: 2850 - total flux cleaned = -0.0216752 Jy ! Component: 2900 - total flux cleaned = -0.0217193 Jy ! Component: 2950 - total flux cleaned = -0.021809 Jy ! Component: 3000 - total flux cleaned = -0.021855 Jy ! Component: 3050 - total flux cleaned = -0.0219034 Jy ! Component: 3100 - total flux cleaned = -0.0219032 Jy ! Component: 3150 - total flux cleaned = -0.0220035 Jy ! Component: 3200 - total flux cleaned = -0.0220551 Jy ! Component: 3250 - total flux cleaned = -0.0221616 Jy ! Component: 3300 - total flux cleaned = -0.0222164 Jy ! Component: 3350 - total flux cleaned = -0.022329 Jy ! Component: 3400 - total flux cleaned = -0.0224459 Jy ! Component: 3450 - total flux cleaned = -0.0225054 Jy ! Component: 3500 - total flux cleaned = -0.022628 Jy ! Component: 3550 - total flux cleaned = -0.0227559 Jy ! Component: 3600 - total flux cleaned = -0.0228874 Jy ! Component: 3650 - total flux cleaned = -0.0229561 Jy ! Component: 3700 - total flux cleaned = -0.0230956 Jy ! Component: 3750 - total flux cleaned = -0.0231683 Jy ! Component: 3800 - total flux cleaned = -0.0233154 Jy ! Component: 3850 - total flux cleaned = -0.023469 Jy ! Component: 3900 - total flux cleaned = -0.0235473 Jy ! Component: 3950 - total flux cleaned = -0.0237087 Jy ! Component: 4000 - total flux cleaned = -0.0237917 Jy ! Component: 4050 - total flux cleaned = -0.0238766 Jy ! Total flux subtracted in 4096 components = -0.0240524 Jy ! Clean residual min=-0.005071 max=0.005123 Jy/beam ! Clean residual mean=-0.000078 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.341172 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 311 components and 0.341172 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 16.63 at -20.84 degrees (North through East) ! Clean map min=-0.0096721 max=0.25091 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.250909 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133799 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.59978 1.59978 3.19955 6.39911 12.7982 25.5964 51.1928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.25 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 16.63 at -20.84 degrees (North through East) ! Clean map min=-0.0096721 max=0.25091 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:10:08 2019