! Started logfile: J1036-3744_S_2017_08_12_pus_uvs.log on Fri May 10 14:57:41 2019 obs J1036-3744_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_08_12_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.423932 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 2976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 297 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.689775Jy sigma=0.004401 ! Fit after self-cal, rms=0.648171Jy sigma=0.004141 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=6.381 mas, bpa=-4.902 degrees ! Estimated noise=2720.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.276481 Jy ! Component: 100 - total flux cleaned = 0.339344 Jy ! Total flux subtracted in 100 components = 0.339344 Jy ! Clean residual min=-0.011159 max=0.022656 Jy/beam ! Clean residual mean=-0.000100 rms=0.003237 Jy/beam ! Combined flux in latest and established models = 0.339344 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.339344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110353Jy sigma=0.000691 ! Fit after self-cal, rms=0.110355Jy sigma=0.000691 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232761 Jy ! Component: 100 - total flux cleaned = 0.0340784 Jy ! Total flux subtracted in 100 components = 0.0340784 Jy ! Clean residual min=-0.007805 max=0.008349 Jy/beam ! Clean residual mean=-0.000042 rms=0.001980 Jy/beam ! Combined flux in latest and established models = 0.373422 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.373422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105109Jy sigma=0.000655 ! Fit after self-cal, rms=0.105118Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.402 mas, bpa=-4.839 degrees ! Estimated noise=2302.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675291 Jy ! Component: 100 - total flux cleaned = 0.00986174 Jy ! Component: 150 - total flux cleaned = 0.0113192 Jy ! Component: 200 - total flux cleaned = 0.011742 Jy ! Total flux subtracted in 200 components = 0.011742 Jy ! Clean residual min=-0.005596 max=0.006315 Jy/beam ! Clean residual mean=-0.000032 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.385164 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 31 components and 0.385164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104725Jy sigma=0.000653 ! Fit after self-cal, rms=0.104731Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.08 ! LA 1.01 MK 1.02 NL 1.00* OV 0.99 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.03 ! LA 0.97 MK 1.00 NL 1.00* OV 1.02 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.00 ! LA 0.98 MK 1.01 NL 1.00* OV 0.96 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104731Jy sigma=0.000653 ! Fit after self-cal, rms=0.104045Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.455 mas, bpa=-3.619 degrees ! Estimated noise=2353.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126054 Jy ! Component: 100 - total flux cleaned = -7.10782e-05 Jy ! Component: 150 - total flux cleaned = -4.62383e-05 Jy ! Component: 200 - total flux cleaned = -6.8439e-05 Jy ! Total flux subtracted in 200 components = -6.8439e-05 Jy ! Clean residual min=-0.004744 max=0.005853 Jy/beam ! Clean residual mean=-0.000011 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.385096 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.385096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104031Jy sigma=0.000646 ! Fit after self-cal, rms=0.104051Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104051Jy sigma=0.000646 ! Fit after self-cal, rms=0.103912Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.459 mas, bpa=-3.585 degrees ! Estimated noise=2353.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157103 Jy ! Component: 100 - total flux cleaned = -0.000121153 Jy ! Component: 150 - total flux cleaned = -0.000104797 Jy ! Component: 200 - total flux cleaned = -0.000104591 Jy ! Total flux subtracted in 200 components = -0.000104591 Jy ! Clean residual min=-0.004630 max=0.005802 Jy/beam ! Clean residual mean=-0.000016 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.384991 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.384991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103906Jy sigma=0.000645 ! Fit after self-cal, rms=0.103907Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -100.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00462482 Jy ! Component: 100 - total flux cleaned = 0.00510895 Jy ! Component: 150 - total flux cleaned = 0.00511024 Jy ! Component: 200 - total flux cleaned = 0.00533179 Jy ! Total flux subtracted in 200 components = 0.00533179 Jy ! Clean residual min=-0.004733 max=0.005061 Jy/beam ! Clean residual mean=0.000007 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.390323 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.390323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103687Jy sigma=0.000644 ! Fit after self-cal, rms=0.103678Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103678Jy sigma=0.000644 ! Fit after self-cal, rms=0.103118Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.466 mas, bpa=-3.574 degrees ! Estimated noise=2348.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581711 Jy ! Component: 100 - total flux cleaned = 0.000580215 Jy ! Component: 150 - total flux cleaned = 0.000579476 Jy ! Component: 200 - total flux cleaned = 0.000621794 Jy ! Total flux subtracted in 200 components = 0.000621794 Jy ! Clean residual min=-0.004200 max=0.004843 Jy/beam ! Clean residual mean=0.000016 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.390944 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.390945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103074Jy sigma=0.000641 ! Fit after self-cal, rms=0.103082Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.37277e-05 Jy ! Component: 100 - total flux cleaned = 4.2607e-05 Jy ! Component: 150 - total flux cleaned = 6.90831e-06 Jy ! Component: 200 - total flux cleaned = -2.82919e-05 Jy ! Total flux subtracted in 200 components = -2.82919e-05 Jy ! Clean residual min=-0.004207 max=0.004818 Jy/beam ! Clean residual mean=0.000017 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.390916 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.390916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103057Jy sigma=0.000641 ! Fit after self-cal, rms=0.103057Jy sigma=0.000641 ! Inverting map ! Added new window around map position (96.5, -68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00427895 Jy ! Component: 100 - total flux cleaned = 0.00471211 Jy ! Component: 150 - total flux cleaned = 0.00471728 Jy ! Component: 200 - total flux cleaned = 0.00471888 Jy ! Total flux subtracted in 200 components = 0.00471888 Jy ! Clean residual min=-0.003853 max=0.004606 Jy/beam ! Clean residual mean=-0.000013 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.395635 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 103 components and 0.395635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102873Jy sigma=0.000639 ! Fit after self-cal, rms=0.102868Jy sigma=0.000639 ! Inverting map ! Added new window around map position (10.5, 60.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275921 Jy ! Component: 100 - total flux cleaned = 0.00283918 Jy ! Component: 150 - total flux cleaned = 0.00332583 Jy ! Component: 200 - total flux cleaned = 0.00406067 Jy ! Total flux subtracted in 200 components = 0.00406067 Jy ! Clean residual min=-0.003675 max=0.004058 Jy/beam ! Clean residual mean=-0.000007 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.399696 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 0.399696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102690Jy sigma=0.000638 ! Fit after self-cal, rms=0.102684Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102684Jy sigma=0.000638 ! Fit after self-cal, rms=0.102456Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.05 mas, bmaj=27.72 mas, bpa=-1.599 degrees ! Estimated noise=3224.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123875 Jy ! Component: 100 - total flux cleaned = 0.001763 Jy ! Component: 150 - total flux cleaned = 0.00190543 Jy ! Component: 200 - total flux cleaned = 0.00206177 Jy ! Total flux subtracted in 200 components = 0.00206177 Jy ! Clean residual min=-0.003747 max=0.003762 Jy/beam ! Clean residual mean=0.000006 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.401758 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 133 components and 0.401758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102438Jy sigma=0.000638 ! Fit after self-cal, rms=0.102438Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240133 Jy ! Component: 100 - total flux cleaned = 0.000361472 Jy ! Component: 150 - total flux cleaned = 0.000498828 Jy ! Component: 200 - total flux cleaned = 0.000607054 Jy ! Total flux subtracted in 200 components = 0.000607054 Jy ! Clean residual min=-0.003669 max=0.003814 Jy/beam ! Clean residual mean=0.000010 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.402365 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 137 components and 0.402365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102434Jy sigma=0.000638 ! Fit after self-cal, rms=0.102433Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.464 mas, bpa=-3.598 degrees ! Estimated noise=2344.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.464 at -3.598 degrees (North through East) ! Clean map min=-0.0034138 max=0.35419 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.32 mas, bmaj=6.437 mas, bpa=-3.751 degrees ! Estimated noise=2744.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.275411 Jy ! Component: 100 - total flux cleaned = 0.338075 Jy ! Component: 150 - total flux cleaned = 0.360536 Jy ! Component: 200 - total flux cleaned = 0.370546 Jy ! Total flux subtracted in 200 components = 0.370546 Jy ! Clean residual min=-0.006843 max=0.006564 Jy/beam ! Clean residual mean=-0.000041 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.370546 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.370546 Jy ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.464 mas, bpa=-3.598 degrees ! Estimated noise=2344.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00826786 Jy ! Component: 100 - total flux cleaned = 0.0138623 Jy ! Component: 150 - total flux cleaned = 0.0184536 Jy ! Component: 200 - total flux cleaned = 0.0222804 Jy ! Total flux subtracted in 200 components = 0.0222804 Jy ! Clean residual min=-0.004070 max=0.004411 Jy/beam ! Clean residual mean=-0.000011 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.392826 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.392826 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.05 mas, bmaj=27.72 mas, bpa=-1.599 degrees ! Estimated noise=3224.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037093 Jy ! Component: 100 - total flux cleaned = 0.00595931 Jy ! Component: 150 - total flux cleaned = 0.00763215 Jy ! Component: 200 - total flux cleaned = 0.00889608 Jy ! Total flux subtracted in 200 components = 0.00889608 Jy ! Clean residual min=-0.004103 max=0.003816 Jy/beam ! Clean residual mean=0.000005 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.401722 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402765 Jy ! Component: 100 - total flux cleaned = 0.000766845 Jy ! Component: 150 - total flux cleaned = 0.0010939 Jy ! Component: 200 - total flux cleaned = 0.00129453 Jy ! Total flux subtracted in 200 components = 0.00129453 Jy ! Clean residual min=-0.003960 max=0.003940 Jy/beam ! Clean residual mean=0.000011 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 0.403017 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 88 components and 0.403017 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.772 mas, bmaj=7.464 mas, bpa=-3.598 degrees ! Estimated noise=2344.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116135 Jy ! Component: 100 - total flux cleaned = 0.00161286 Jy ! Component: 150 - total flux cleaned = 0.00185084 Jy ! Component: 200 - total flux cleaned = 0.00206856 Jy ! Total flux subtracted in 200 components = 0.00206856 Jy ! Clean residual min=-0.003699 max=0.003863 Jy/beam ! Clean residual mean=0.000004 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.405085 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 0.405085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102537Jy sigma=0.000639 ! Fit after self-cal, rms=0.102525Jy sigma=0.000639 wmodel J1036-3744_S_2017_08_12_pus_map.mod ! Writing 107 model components to file: J1036-3744_S_2017_08_12_pus_map.mod wobs J1036-3744_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_08_12_pus_uvs.fits wwins J1036-3744_S_2017_08_12_pus_map.win ! wwins: Wrote 5 windows to J1036-3744_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746521 Jy ! Component: 100 - total flux cleaned = 0.00087612 Jy ! Component: 150 - total flux cleaned = 0.000935165 Jy ! Component: 200 - total flux cleaned = 0.00110851 Jy ! Component: 250 - total flux cleaned = 0.00144613 Jy ! Component: 300 - total flux cleaned = 0.00177107 Jy ! Component: 350 - total flux cleaned = 0.00182289 Jy ! Component: 400 - total flux cleaned = 0.00182423 Jy ! Component: 450 - total flux cleaned = 0.00212186 Jy ! Component: 500 - total flux cleaned = 0.00202445 Jy ! Component: 550 - total flux cleaned = 0.00216661 Jy ! Component: 600 - total flux cleaned = 0.00221405 Jy ! Component: 650 - total flux cleaned = 0.00216915 Jy ! Component: 700 - total flux cleaned = 0.00203631 Jy ! Component: 750 - total flux cleaned = 0.00203737 Jy ! Component: 800 - total flux cleaned = 0.00225166 Jy ! Component: 850 - total flux cleaned = 0.00220815 Jy ! Component: 900 - total flux cleaned = 0.00229148 Jy ! Component: 950 - total flux cleaned = 0.00237353 Jy ! Component: 1000 - total flux cleaned = 0.00253412 Jy ! Component: 1050 - total flux cleaned = 0.00253381 Jy ! Component: 1100 - total flux cleaned = 0.00276823 Jy ! Component: 1150 - total flux cleaned = 0.00280677 Jy ! Component: 1200 - total flux cleaned = 0.00310974 Jy ! Component: 1250 - total flux cleaned = 0.00322108 Jy ! Component: 1300 - total flux cleaned = 0.00336764 Jy ! Component: 1350 - total flux cleaned = 0.00340377 Jy ! Component: 1400 - total flux cleaned = 0.00333269 Jy ! Component: 1450 - total flux cleaned = 0.00354532 Jy ! Component: 1500 - total flux cleaned = 0.00351033 Jy ! Component: 1550 - total flux cleaned = 0.00371678 Jy ! Component: 1600 - total flux cleaned = 0.00371627 Jy ! Component: 1650 - total flux cleaned = 0.00391794 Jy ! Component: 1700 - total flux cleaned = 0.00391806 Jy ! Component: 1750 - total flux cleaned = 0.00388503 Jy ! Component: 1800 - total flux cleaned = 0.0040147 Jy ! Component: 1850 - total flux cleaned = 0.0040469 Jy ! Component: 1900 - total flux cleaned = 0.00407873 Jy ! Component: 1950 - total flux cleaned = 0.00404719 Jy ! Component: 2000 - total flux cleaned = 0.0041411 Jy ! Component: 2050 - total flux cleaned = 0.00420207 Jy ! Component: 2100 - total flux cleaned = 0.00420186 Jy ! Component: 2150 - total flux cleaned = 0.0042623 Jy ! Component: 2200 - total flux cleaned = 0.00429246 Jy ! Component: 2250 - total flux cleaned = 0.00441077 Jy ! Component: 2300 - total flux cleaned = 0.00452824 Jy ! Component: 2350 - total flux cleaned = 0.00461541 Jy ! Component: 2400 - total flux cleaned = 0.00470155 Jy ! Component: 2450 - total flux cleaned = 0.00470152 Jy ! Component: 2500 - total flux cleaned = 0.00473004 Jy ! Component: 2550 - total flux cleaned = 0.004898 Jy ! Component: 2600 - total flux cleaned = 0.00495327 Jy ! Component: 2650 - total flux cleaned = 0.00498095 Jy ! Component: 2700 - total flux cleaned = 0.00500806 Jy ! Component: 2750 - total flux cleaned = 0.00500792 Jy ! Component: 2800 - total flux cleaned = 0.0050886 Jy ! Component: 2850 - total flux cleaned = 0.00516877 Jy ! Component: 2900 - total flux cleaned = 0.00511601 Jy ! Component: 2950 - total flux cleaned = 0.00522109 Jy ! Component: 3000 - total flux cleaned = 0.00524706 Jy ! Component: 3050 - total flux cleaned = 0.00522124 Jy ! Component: 3100 - total flux cleaned = 0.00519535 Jy ! Component: 3150 - total flux cleaned = 0.00532288 Jy ! Component: 3200 - total flux cleaned = 0.00524698 Jy ! Component: 3250 - total flux cleaned = 0.00529745 Jy ! Component: 3300 - total flux cleaned = 0.00527249 Jy ! Component: 3350 - total flux cleaned = 0.00534695 Jy ! Component: 3400 - total flux cleaned = 0.00537169 Jy ! Component: 3450 - total flux cleaned = 0.00532245 Jy ! Component: 3500 - total flux cleaned = 0.00532254 Jy ! Component: 3550 - total flux cleaned = 0.00539542 Jy ! Component: 3600 - total flux cleaned = 0.0054436 Jy ! Component: 3650 - total flux cleaned = 0.00549144 Jy ! Component: 3700 - total flux cleaned = 0.00546741 Jy ! Component: 3750 - total flux cleaned = 0.00544378 Jy ! Component: 3800 - total flux cleaned = 0.00549073 Jy ! Component: 3850 - total flux cleaned = 0.00551391 Jy ! Component: 3900 - total flux cleaned = 0.00549035 Jy ! Component: 3950 - total flux cleaned = 0.00549016 Jy ! Component: 4000 - total flux cleaned = 0.00549016 Jy ! Component: 4050 - total flux cleaned = 0.0055589 Jy ! Total flux subtracted in 4096 components = 0.00558168 Jy ! Clean residual min=-0.001229 max=0.001271 Jy/beam ! Clean residual mean=0.000002 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.410667 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 343 components and 0.410667 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.464 at -3.598 degrees (North through East) ! Clean map min=-0.0031145 max=0.35348 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.353478 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000398851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.338509 0.338509 0.677017 1.35403 2.70807 5.41614 10.8323 21.6646 43.3291 86.6582 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.353 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.772 x 7.464 at -3.598 degrees (North through East) ! Clean map min=-0.0031145 max=0.35348 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:57:45 2019