! Started logfile: J1036-3744_S_2017_07_09_pus_uvs.log on Wed May 8 14:47:19 2019 obs J1036-3744_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_07_09_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.317949 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 744 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.645055Jy sigma=0.004183 ! Fit after self-cal, rms=0.618319Jy sigma=0.004016 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=49.4 mas, bpa=7.437 degrees ! Estimated noise=5240.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299166 Jy ! Component: 100 - total flux cleaned = 0.364419 Jy ! Total flux subtracted in 100 components = 0.364419 Jy ! Clean residual min=-0.018070 max=0.018209 Jy/beam ! Clean residual mean=-0.000149 rms=0.005522 Jy/beam ! Combined flux in latest and established models = 0.364419 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.364419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106941Jy sigma=0.000678 ! Fit after self-cal, rms=0.106936Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.872 mas, bmaj=47.25 mas, bpa=7.243 degrees ! Estimated noise=4502.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162829 Jy ! Component: 100 - total flux cleaned = 0.0108414 Jy ! Component: 150 - total flux cleaned = 0.00753066 Jy ! Component: 200 - total flux cleaned = 0.00536486 Jy ! Total flux subtracted in 200 components = 0.00536486 Jy ! Clean residual min=-0.005706 max=0.005772 Jy/beam ! Clean residual mean=-0.000049 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 0.369783 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.369783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101653Jy sigma=0.000646 ! Fit after self-cal, rms=0.101524Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.99 ! LA 0.99 MK 1.00* NL 1.00* OV 1.03 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.02 ! LA 0.98 MK 1.00* NL 1.00* OV 1.02 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.95 ! LA 0.98 MK 1.00* NL 1.00* OV 0.93 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.101524Jy sigma=0.000645 ! Fit after self-cal, rms=0.099408Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=46.04 mas, bpa=7.237 degrees ! Estimated noise=4599.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00418025 Jy ! Component: 100 - total flux cleaned = -0.00602235 Jy ! Component: 150 - total flux cleaned = -0.00753874 Jy ! Component: 200 - total flux cleaned = -0.00799886 Jy ! Total flux subtracted in 200 components = -0.00799886 Jy ! Clean residual min=-0.002272 max=0.002262 Jy/beam ! Clean residual mean=0.000030 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.361785 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 103 components and 0.361785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098735Jy sigma=0.000638 ! Fit after self-cal, rms=0.098708Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098708Jy sigma=0.000638 ! Fit after self-cal, rms=0.098937Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.749 mas, bmaj=46.04 mas, bpa=7.238 degrees ! Estimated noise=4611.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000852581 Jy ! Component: 100 - total flux cleaned = -0.000495165 Jy ! Component: 150 - total flux cleaned = 0.000134979 Jy ! Component: 200 - total flux cleaned = 4.58057e-05 Jy ! Total flux subtracted in 200 components = 4.58057e-05 Jy ! Clean residual min=-0.001497 max=0.001487 Jy/beam ! Clean residual mean=0.000023 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.36183 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 146 components and 0.36183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098712Jy sigma=0.000636 ! Fit after self-cal, rms=0.098705Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350699 Jy ! Component: 100 - total flux cleaned = 0.000423596 Jy ! Component: 150 - total flux cleaned = 0.000571649 Jy ! Component: 200 - total flux cleaned = 0.000640527 Jy ! Total flux subtracted in 200 components = 0.000640527 Jy ! Clean residual min=-0.001078 max=0.001081 Jy/beam ! Clean residual mean=0.000016 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.362471 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 182 components and 0.362471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098600Jy sigma=0.000635 ! Fit after self-cal, rms=0.098595Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098595Jy sigma=0.000635 ! Fit after self-cal, rms=0.098626Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.748 mas, bmaj=46.04 mas, bpa=7.238 degrees ! Estimated noise=4613.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160796 Jy ! Component: 100 - total flux cleaned = 9.89089e-05 Jy ! Component: 150 - total flux cleaned = 0.000100105 Jy ! Component: 200 - total flux cleaned = 9.78871e-05 Jy ! Total flux subtracted in 200 components = 9.78871e-05 Jy ! Clean residual min=-0.000852 max=0.000852 Jy/beam ! Clean residual mean=0.000013 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.362569 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 217 components and 0.362569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098565Jy sigma=0.000635 ! Fit after self-cal, rms=0.098563Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374541 Jy ! Component: 100 - total flux cleaned = 0.000186684 Jy ! Component: 150 - total flux cleaned = 0.000232806 Jy ! Component: 200 - total flux cleaned = 0.000362399 Jy ! Total flux subtracted in 200 components = 0.000362399 Jy ! Clean residual min=-0.000702 max=0.000703 Jy/beam ! Clean residual mean=0.000010 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.362931 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 254 components and 0.362931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098525Jy sigma=0.000635 ! Fit after self-cal, rms=0.098523Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098523Jy sigma=0.000635 ! Fit after self-cal, rms=0.098538Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.36 mas, bmaj=49.33 mas, bpa=-0.6838 degrees ! Estimated noise=5550.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123504 Jy ! Component: 100 - total flux cleaned = 0.000391667 Jy ! Component: 150 - total flux cleaned = 0.000528207 Jy ! Component: 200 - total flux cleaned = 0.000723457 Jy ! Total flux subtracted in 200 components = 0.000723457 Jy ! Clean residual min=-0.000857 max=0.000854 Jy/beam ! Clean residual mean=0.000014 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.363655 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 287 components and 0.363655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098525Jy sigma=0.000634 ! Fit after self-cal, rms=0.098524Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575304 Jy ! Component: 100 - total flux cleaned = 0.00088125 Jy ! Component: 150 - total flux cleaned = 0.00117374 Jy ! Component: 200 - total flux cleaned = 0.00121027 Jy ! Total flux subtracted in 200 components = 0.00121027 Jy ! Clean residual min=-0.000605 max=0.000605 Jy/beam ! Clean residual mean=0.000014 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.364865 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 332 components and 0.364865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098510Jy sigma=0.000634 ! Fit after self-cal, rms=0.098510Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=46.05 mas, bpa=7.238 degrees ! Estimated noise=4614.85 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.747 x 46.05 at 7.238 degrees (North through East) ! Clean map min=-0.0055791 max=0.37482 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=49.21 mas, bpa=7.427 degrees ! Estimated noise=5532.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298424 Jy ! Component: 100 - total flux cleaned = 0.363614 Jy ! Component: 150 - total flux cleaned = 0.367512 Jy ! Component: 200 - total flux cleaned = 0.365485 Jy ! Total flux subtracted in 200 components = 0.365485 Jy ! Clean residual min=-0.007299 max=0.007152 Jy/beam ! Clean residual mean=-0.000000 rms=0.002856 Jy/beam ! Combined flux in latest and established models = 0.365485 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.365485 Jy ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=46.05 mas, bpa=7.238 degrees ! Estimated noise=4614.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213536 Jy ! Component: 100 - total flux cleaned = -0.000720711 Jy ! Component: 150 - total flux cleaned = -0.00361531 Jy ! Component: 200 - total flux cleaned = -0.00405297 Jy ! Total flux subtracted in 200 components = -0.00405297 Jy ! Clean residual min=-0.003231 max=0.003207 Jy/beam ! Clean residual mean=0.000026 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.361432 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 92 components and 0.361432 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.36 mas, bmaj=49.33 mas, bpa=-0.6838 degrees ! Estimated noise=5550.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000311841 Jy ! Component: 100 - total flux cleaned = -0.000192345 Jy ! Component: 150 - total flux cleaned = -0.000277147 Jy ! Component: 200 - total flux cleaned = -6.622e-05 Jy ! Total flux subtracted in 200 components = -6.622e-05 Jy ! Clean residual min=-0.001124 max=0.001125 Jy/beam ! Clean residual mean=0.000016 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.361366 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200748 Jy ! Component: 100 - total flux cleaned = 0.000455514 Jy ! Component: 150 - total flux cleaned = 0.000393774 Jy ! Component: 200 - total flux cleaned = 0.000394323 Jy ! Total flux subtracted in 200 components = 0.000394323 Jy ! Clean residual min=-0.001071 max=0.001048 Jy/beam ! Clean residual mean=0.000011 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.36176 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 191 components and 0.36176 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=46.05 mas, bpa=7.238 degrees ! Estimated noise=4614.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153015 Jy ! Component: 100 - total flux cleaned = -0.00215511 Jy ! Component: 150 - total flux cleaned = -0.00226129 Jy ! Component: 200 - total flux cleaned = -0.00245038 Jy ! Total flux subtracted in 200 components = -0.00245038 Jy ! Clean residual min=-0.001478 max=0.001479 Jy/beam ! Clean residual mean=0.000015 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.35931 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 235 components and 0.35931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098692Jy sigma=0.000636 ! Fit after self-cal, rms=0.098681Jy sigma=0.000635 wmodel J1036-3744_S_2017_07_09_pus_map.mod ! Writing 235 model components to file: J1036-3744_S_2017_07_09_pus_map.mod wobs J1036-3744_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_07_09_pus_uvs.fits wwins J1036-3744_S_2017_07_09_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1036-3744_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.747 x 46.05 at 7.238 degrees (North through East) ! Clean map min=-0.0074603 max=0.36957 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.369571 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000574385 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.466258 0.466258 0.932516 1.86503 3.73006 7.46013 14.9203 29.8405 59.681 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.369 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.747 x 46.05 at 7.238 degrees (North through East) ! Clean map min=-0.0074603 max=0.36957 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:47:22 2019