! Started logfile: J1036-3744_S_2017_06_10_pus_uvs.log on Mon May 6 14:51:46 2019 obs J1036-3744_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_06_10_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.591453 visibilities/baseline/integration-bin. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.662301Jy sigma=0.004340 ! Fit after self-cal, rms=0.651051Jy sigma=0.004266 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.396 mas, bmaj=6.929 mas, bpa=-11.77 degrees ! Estimated noise=4738.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.272827 Jy ! Component: 100 - total flux cleaned = 0.335953 Jy ! Total flux subtracted in 100 components = 0.335953 Jy ! Clean residual min=-0.015603 max=0.024242 Jy/beam ! Clean residual mean=0.000092 rms=0.004697 Jy/beam ! Combined flux in latest and established models = 0.335953 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.335953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115029Jy sigma=0.000729 ! Fit after self-cal, rms=0.115044Jy sigma=0.000729 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=7.771 mas, bpa=-11.47 degrees ! Estimated noise=3540.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296667 Jy ! Component: 100 - total flux cleaned = 0.0400623 Jy ! Component: 150 - total flux cleaned = 0.0444709 Jy ! Component: 200 - total flux cleaned = 0.0461296 Jy ! Total flux subtracted in 200 components = 0.0461296 Jy ! Clean residual min=-0.008512 max=0.009341 Jy/beam ! Clean residual mean=-0.000046 rms=0.002441 Jy/beam ! Combined flux in latest and established models = 0.382083 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.382083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108703Jy sigma=0.000683 ! Fit after self-cal, rms=0.108712Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.00 ! LA 0.99 MK 0.99 NL 1.00* OV 1.04 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.98 ! LA 0.97 MK 1.01 NL 1.00* OV 1.02 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.95 ! LA 0.94 MK 1.02 NL 1.14 OV 0.91 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.00* ! LA 1.04 MK 0.94 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.108712Jy sigma=0.000683 ! Fit after self-cal, rms=0.107604Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.768 mas, bpa=-11.47 degrees ! Estimated noise=3537.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.87597e-05 Jy ! Component: 100 - total flux cleaned = -0.000126181 Jy ! Component: 150 - total flux cleaned = -0.000243691 Jy ! Component: 200 - total flux cleaned = -0.000245048 Jy ! Total flux subtracted in 200 components = -0.000245048 Jy ! Clean residual min=-0.008133 max=0.007664 Jy/beam ! Clean residual mean=-0.000027 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.381838 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 24 components and 0.381838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107561Jy sigma=0.000670 ! Fit after self-cal, rms=0.107594Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107594Jy sigma=0.000670 ! Fit after self-cal, rms=0.107506Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=7.768 mas, bpa=-11.5 degrees ! Estimated noise=3534.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.88772e-05 Jy ! Component: 100 - total flux cleaned = -0.000152743 Jy ! Component: 150 - total flux cleaned = -0.000208269 Jy ! Component: 200 - total flux cleaned = -0.000208886 Jy ! Total flux subtracted in 200 components = -0.000208886 Jy ! Clean residual min=-0.008080 max=0.007687 Jy/beam ! Clean residual mean=-0.000027 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.381629 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.381629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107483Jy sigma=0.000669 ! Fit after self-cal, rms=0.107481Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.19109e-05 Jy ! Component: 100 - total flux cleaned = -2.42521e-05 Jy ! Component: 150 - total flux cleaned = 5.13534e-07 Jy ! Component: 200 - total flux cleaned = 4.15412e-07 Jy ! Total flux subtracted in 200 components = 4.15412e-07 Jy ! Clean residual min=-0.008064 max=0.007657 Jy/beam ! Clean residual mean=-0.000026 rms=0.001907 Jy/beam ! Combined flux in latest and established models = 0.381629 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.381629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107465Jy sigma=0.000669 ! Fit after self-cal, rms=0.107464Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107464Jy sigma=0.000669 ! Fit after self-cal, rms=0.107356Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.767 mas, bpa=-11.53 degrees ! Estimated noise=3531.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.52786e-05 Jy ! Component: 100 - total flux cleaned = -0.000118427 Jy ! Component: 150 - total flux cleaned = -0.000166274 Jy ! Component: 200 - total flux cleaned = -0.000189482 Jy ! Total flux subtracted in 200 components = -0.000189482 Jy ! Clean residual min=-0.008040 max=0.007635 Jy/beam ! Clean residual mean=-0.000027 rms=0.001901 Jy/beam ! Combined flux in latest and established models = 0.38144 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.38144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107340Jy sigma=0.000669 ! Fit after self-cal, rms=0.107339Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.52903e-05 Jy ! Component: 100 - total flux cleaned = -4.12848e-05 Jy ! Component: 150 - total flux cleaned = -4.10041e-05 Jy ! Component: 200 - total flux cleaned = -4.15651e-05 Jy ! Total flux subtracted in 200 components = -4.15651e-05 Jy ! Clean residual min=-0.008039 max=0.007592 Jy/beam ! Clean residual mean=-0.000027 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.381398 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.381398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107328Jy sigma=0.000669 ! Fit after self-cal, rms=0.107328Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107328Jy sigma=0.000669 ! Fit after self-cal, rms=0.107233Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.864 mas, bmaj=27.72 mas, bpa=-7.705 degrees ! Estimated noise=4683.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160741 Jy ! Component: 100 - total flux cleaned = 0.000162503 Jy ! Component: 150 - total flux cleaned = 0.000163399 Jy ! Component: 200 - total flux cleaned = 0.000164044 Jy ! Total flux subtracted in 200 components = 0.000164044 Jy ! Clean residual min=-0.006356 max=0.006699 Jy/beam ! Clean residual mean=-0.000056 rms=0.002495 Jy/beam ! Combined flux in latest and established models = 0.381562 Jy selfcal ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 28 components and 0.381562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107231Jy sigma=0.000669 ! Fit after self-cal, rms=0.107228Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.01037e-06 Jy ! Component: 100 - total flux cleaned = 5.74623e-06 Jy ! Component: 150 - total flux cleaned = 5.49947e-06 Jy ! Component: 200 - total flux cleaned = 5.14525e-06 Jy ! Total flux subtracted in 200 components = 5.14525e-06 Jy ! Clean residual min=-0.006350 max=0.006693 Jy/beam ! Clean residual mean=-0.000056 rms=0.002490 Jy/beam ! Combined flux in latest and established models = 0.381568 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 30 components and 0.381568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107235Jy sigma=0.000669 ! Fit after self-cal, rms=0.107233Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.767 mas, bpa=-11.56 degrees ! Estimated noise=3529.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 7.767 at -11.56 degrees (North through East) ! Clean map min=-0.007556 max=0.35342 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=6.903 mas, bpa=-11.78 degrees ! Estimated noise=4747.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273268 Jy ! Component: 100 - total flux cleaned = 0.337265 Jy ! Component: 150 - total flux cleaned = 0.360758 Jy ! Component: 200 - total flux cleaned = 0.370191 Jy ! Total flux subtracted in 200 components = 0.370191 Jy ! Clean residual min=-0.011549 max=0.007895 Jy/beam ! Clean residual mean=0.000007 rms=0.002488 Jy/beam ! Combined flux in latest and established models = 0.370191 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.370191 Jy ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.767 mas, bpa=-11.56 degrees ! Estimated noise=3529.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717086 Jy ! Component: 100 - total flux cleaned = 0.010083 Jy ! Component: 150 - total flux cleaned = 0.0106403 Jy ! Component: 200 - total flux cleaned = 0.0106882 Jy ! Total flux subtracted in 200 components = 0.0106882 Jy ! Clean residual min=-0.008125 max=0.007724 Jy/beam ! Clean residual mean=-0.000027 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.380879 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.380879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.864 mas, bmaj=27.72 mas, bpa=-7.705 degrees ! Estimated noise=4683.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414845 Jy ! Component: 100 - total flux cleaned = 0.000413792 Jy ! Component: 150 - total flux cleaned = 0.000412794 Jy ! Component: 200 - total flux cleaned = 0.000416296 Jy ! Total flux subtracted in 200 components = 0.000416296 Jy ! Clean residual min=-0.006511 max=0.007019 Jy/beam ! Clean residual mean=-0.000057 rms=0.002581 Jy/beam ! Combined flux in latest and established models = 0.381295 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.97317e-06 Jy ! Component: 100 - total flux cleaned = 1.21242e-05 Jy ! Component: 150 - total flux cleaned = 1.79491e-05 Jy ! Component: 200 - total flux cleaned = 2.33487e-05 Jy ! Total flux subtracted in 200 components = 2.33487e-05 Jy ! Clean residual min=-0.006435 max=0.006875 Jy/beam ! Clean residual mean=-0.000057 rms=0.002534 Jy/beam ! Combined flux in latest and established models = 0.381319 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 23 components and 0.381319 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.767 mas, bpa=-11.56 degrees ! Estimated noise=3529.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000404869 Jy ! Component: 100 - total flux cleaned = -0.000333754 Jy ! Component: 150 - total flux cleaned = -0.000387452 Jy ! Component: 200 - total flux cleaned = -0.000388797 Jy ! Total flux subtracted in 200 components = -0.000388797 Jy ! Clean residual min=-0.008092 max=0.007456 Jy/beam ! Clean residual mean=-0.000027 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 0.38093 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.38093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107267Jy sigma=0.000669 ! Fit after self-cal, rms=0.107260Jy sigma=0.000669 wmodel J1036-3744_S_2017_06_10_pus_map.mod ! Writing 33 model components to file: J1036-3744_S_2017_06_10_pus_map.mod wobs J1036-3744_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_06_10_pus_uvs.fits wwins J1036-3744_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1036-3744_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010396 Jy ! Component: 100 - total flux cleaned = -0.00128417 Jy ! Component: 150 - total flux cleaned = -0.0018115 Jy ! Component: 200 - total flux cleaned = -0.00258285 Jy ! Component: 250 - total flux cleaned = -0.00284925 Jy ! Component: 300 - total flux cleaned = -0.00335234 Jy ! Component: 350 - total flux cleaned = -0.00358835 Jy ! Component: 400 - total flux cleaned = -0.00336131 Jy ! Component: 450 - total flux cleaned = -0.0030019 Jy ! Component: 500 - total flux cleaned = -0.00279874 Jy ! Component: 550 - total flux cleaned = -0.00259942 Jy ! Component: 600 - total flux cleaned = -0.0024084 Jy ! Component: 650 - total flux cleaned = -0.00240941 Jy ! Component: 700 - total flux cleaned = -0.00234815 Jy ! Component: 750 - total flux cleaned = -0.00228971 Jy ! Component: 800 - total flux cleaned = -0.00229215 Jy ! Component: 850 - total flux cleaned = -0.00207053 Jy ! Component: 900 - total flux cleaned = -0.00158415 Jy ! Component: 950 - total flux cleaned = -0.0013723 Jy ! Component: 1000 - total flux cleaned = -0.00101007 Jy ! Component: 1050 - total flux cleaned = -0.000908497 Jy ! Component: 1100 - total flux cleaned = -0.000459764 Jy ! Component: 1150 - total flux cleaned = -0.000116093 Jy ! Component: 1200 - total flux cleaned = 0.000174076 Jy ! Component: 1250 - total flux cleaned = 0.000365272 Jy ! Component: 1300 - total flux cleaned = 0.000553523 Jy ! Component: 1350 - total flux cleaned = 0.000739452 Jy ! Component: 1400 - total flux cleaned = 0.000831946 Jy ! Component: 1450 - total flux cleaned = 0.00101453 Jy ! Component: 1500 - total flux cleaned = 0.00128439 Jy ! Component: 1550 - total flux cleaned = 0.00146261 Jy ! Component: 1600 - total flux cleaned = 0.00168367 Jy ! Component: 1650 - total flux cleaned = 0.00185927 Jy ! Component: 1700 - total flux cleaned = 0.0020341 Jy ! Component: 1750 - total flux cleaned = 0.00229416 Jy ! Component: 1800 - total flux cleaned = 0.00250926 Jy ! Component: 1850 - total flux cleaned = 0.00276577 Jy ! Component: 1900 - total flux cleaned = 0.00293614 Jy ! Component: 1950 - total flux cleaned = 0.00319177 Jy ! Component: 2000 - total flux cleaned = 0.00336171 Jy ! Component: 2050 - total flux cleaned = 0.00365904 Jy ! Component: 2100 - total flux cleaned = 0.00382883 Jy ! Component: 2150 - total flux cleaned = 0.00404174 Jy ! Component: 2200 - total flux cleaned = 0.00429751 Jy ! Component: 2250 - total flux cleaned = 0.0042975 Jy ! Component: 2300 - total flux cleaned = 0.00442624 Jy ! Component: 2350 - total flux cleaned = 0.00455539 Jy ! Component: 2400 - total flux cleaned = 0.00468536 Jy ! Component: 2450 - total flux cleaned = 0.00477192 Jy ! Component: 2500 - total flux cleaned = 0.00477173 Jy ! Component: 2550 - total flux cleaned = 0.00485965 Jy ! Component: 2600 - total flux cleaned = 0.00485951 Jy ! Component: 2650 - total flux cleaned = 0.00490445 Jy ! Component: 2700 - total flux cleaned = 0.00504084 Jy ! Component: 2750 - total flux cleaned = 0.00508716 Jy ! Component: 2800 - total flux cleaned = 0.00513392 Jy ! Component: 2850 - total flux cleaned = 0.00518151 Jy ! Component: 2900 - total flux cleaned = 0.00522942 Jy ! Component: 2950 - total flux cleaned = 0.00527821 Jy ! Component: 3000 - total flux cleaned = 0.00532805 Jy ! Component: 3050 - total flux cleaned = 0.00532842 Jy ! Component: 3100 - total flux cleaned = 0.00532902 Jy ! Component: 3150 - total flux cleaned = 0.00538096 Jy ! Component: 3200 - total flux cleaned = 0.00538083 Jy ! Component: 3250 - total flux cleaned = 0.00538098 Jy ! Component: 3300 - total flux cleaned = 0.00543595 Jy ! Component: 3350 - total flux cleaned = 0.00549293 Jy ! Component: 3400 - total flux cleaned = 0.00549362 Jy ! Component: 3450 - total flux cleaned = 0.0054342 Jy ! Component: 3500 - total flux cleaned = 0.00549428 Jy ! Component: 3550 - total flux cleaned = 0.00549374 Jy ! Component: 3600 - total flux cleaned = 0.00555633 Jy ! Component: 3650 - total flux cleaned = 0.00555655 Jy ! Component: 3700 - total flux cleaned = 0.00562235 Jy ! Component: 3750 - total flux cleaned = 0.00555555 Jy ! Component: 3800 - total flux cleaned = 0.00562312 Jy ! Component: 3850 - total flux cleaned = 0.00562302 Jy ! Component: 3900 - total flux cleaned = 0.00562274 Jy ! Component: 3950 - total flux cleaned = 0.00562355 Jy ! Component: 4000 - total flux cleaned = 0.00569683 Jy ! Component: 4050 - total flux cleaned = 0.00569772 Jy ! Total flux subtracted in 4096 components = 0.0056976 Jy ! Clean residual min=-0.004796 max=0.005148 Jy/beam ! Clean residual mean=0.000005 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.386627 Jy keep ! Adding 189 model components to the UV plane model. ! The established model now contains 222 components and 0.386627 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 7.767 at -11.56 degrees (North through East) ! Clean map min=-0.010329 max=0.35524 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.355243 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0013587 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14741 1.14741 2.29482 4.58964 9.17928 18.3586 36.7171 73.4342 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.355 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.909 x 7.767 at -11.56 degrees (North through East) ! Clean map min=-0.010329 max=0.35524 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:51:50 2019