! Started logfile: J1036-3744_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:45:53 2019 obs J1036-3744_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_05_31_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.435556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.644424Jy sigma=0.004079 ! Fit after self-cal, rms=0.640581Jy sigma=0.004055 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=20.7 mas, bpa=11.58 degrees ! Estimated noise=4075.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.290577 Jy ! Component: 100 - total flux cleaned = 0.35566 Jy ! Total flux subtracted in 100 components = 0.35566 Jy ! Clean residual min=-0.015491 max=0.023965 Jy/beam ! Clean residual mean=-0.000000 rms=0.005155 Jy/beam ! Combined flux in latest and established models = 0.355661 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.355661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115516Jy sigma=0.000702 ! Fit after self-cal, rms=0.115541Jy sigma=0.000702 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.987 mas, bmaj=23.32 mas, bpa=11.95 degrees ! Estimated noise=3123.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023608 Jy ! Component: 100 - total flux cleaned = 0.0338213 Jy ! Component: 150 - total flux cleaned = 0.0390796 Jy ! Component: 200 - total flux cleaned = 0.0420519 Jy ! Total flux subtracted in 200 components = 0.0420519 Jy ! Clean residual min=-0.008416 max=0.009380 Jy/beam ! Clean residual mean=0.000022 rms=0.002678 Jy/beam ! Combined flux in latest and established models = 0.397712 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 0.397712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111360Jy sigma=0.000673 ! Fit after self-cal, rms=0.111425Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 0.99 ! LA 0.98 MK 1.00* NL 1.04 OV 0.97 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.01 ! LA 0.94 MK 1.00* NL 1.12 OV 1.01 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.95 ! LA 0.98 MK 1.00* NL 1.04 OV 0.97 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.98 ! LA 1.06 MK 1.00* NL 1.00* OV 1.00* ! PT 1.10 SC 1.00* ! ! ! Fit before self-cal, rms=0.111425Jy sigma=0.000672 ! Fit after self-cal, rms=0.110466Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.965 mas, bmaj=23.62 mas, bpa=11.98 degrees ! Estimated noise=3138.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00153167 Jy ! Component: 100 - total flux cleaned = -0.00170326 Jy ! Component: 150 - total flux cleaned = -0.00184688 Jy ! Component: 200 - total flux cleaned = -0.00197563 Jy ! Total flux subtracted in 200 components = -0.00197563 Jy ! Clean residual min=-0.008161 max=0.008675 Jy/beam ! Clean residual mean=0.000018 rms=0.002201 Jy/beam ! Combined flux in latest and established models = 0.395737 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.395737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110319Jy sigma=0.000656 ! Fit after self-cal, rms=0.110335Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110335Jy sigma=0.000656 ! Fit after self-cal, rms=0.110789Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.964 mas, bmaj=23.7 mas, bpa=11.99 degrees ! Estimated noise=3146.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291639 Jy ! Component: 100 - total flux cleaned = -0.000445154 Jy ! Component: 150 - total flux cleaned = -0.000576925 Jy ! Component: 200 - total flux cleaned = -0.000693369 Jy ! Total flux subtracted in 200 components = -0.000693369 Jy ! Clean residual min=-0.007724 max=0.008389 Jy/beam ! Clean residual mean=0.000032 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 0.395043 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.395044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110677Jy sigma=0.000654 ! Fit after self-cal, rms=0.110682Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.1241e-05 Jy ! Component: 100 - total flux cleaned = -5.02974e-05 Jy ! Component: 150 - total flux cleaned = -9.45982e-05 Jy ! Component: 200 - total flux cleaned = -9.58544e-05 Jy ! Total flux subtracted in 200 components = -9.58544e-05 Jy ! Clean residual min=-0.007641 max=0.008356 Jy/beam ! Clean residual mean=0.000032 rms=0.002090 Jy/beam ! Combined flux in latest and established models = 0.394948 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 67 components and 0.394948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110639Jy sigma=0.000653 ! Fit after self-cal, rms=0.110636Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110636Jy sigma=0.000653 ! Fit after self-cal, rms=0.109603Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=23.74 mas, bpa=11.98 degrees ! Estimated noise=3143.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143033 Jy ! Component: 100 - total flux cleaned = -0.0015855 Jy ! Component: 150 - total flux cleaned = -0.00167556 Jy ! Component: 200 - total flux cleaned = -0.00171574 Jy ! Total flux subtracted in 200 components = -0.00171574 Jy ! Clean residual min=-0.006034 max=0.007638 Jy/beam ! Clean residual mean=0.000073 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.393232 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.393232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109545Jy sigma=0.000647 ! Fit after self-cal, rms=0.109566Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.88015e-05 Jy ! Component: 100 - total flux cleaned = -7.58982e-05 Jy ! Component: 150 - total flux cleaned = -7.61771e-05 Jy ! Component: 200 - total flux cleaned = -0.000110567 Jy ! Total flux subtracted in 200 components = -0.000110567 Jy ! Clean residual min=-0.006064 max=0.007708 Jy/beam ! Clean residual mean=0.000073 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.393121 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.393121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109538Jy sigma=0.000646 ! Fit after self-cal, rms=0.109536Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109536Jy sigma=0.000646 ! Fit after self-cal, rms=0.109690Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.732 mas, bmaj=35.69 mas, bpa=-1.357 degrees ! Estimated noise=3584.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121663 Jy ! Component: 100 - total flux cleaned = -0.00129066 Jy ! Component: 150 - total flux cleaned = -0.00131359 Jy ! Component: 200 - total flux cleaned = -0.00131422 Jy ! Total flux subtracted in 200 components = -0.00131422 Jy ! Clean residual min=-0.006628 max=0.006738 Jy/beam ! Clean residual mean=0.000113 rms=0.002128 Jy/beam ! Combined flux in latest and established models = 0.391807 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 90 components and 0.391807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109666Jy sigma=0.000646 ! Fit after self-cal, rms=0.109665Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185962 Jy ! Component: 100 - total flux cleaned = -0.000160514 Jy ! Component: 150 - total flux cleaned = -9.72188e-05 Jy ! Component: 200 - total flux cleaned = -5.86541e-05 Jy ! Total flux subtracted in 200 components = -5.86541e-05 Jy ! Clean residual min=-0.006641 max=0.006719 Jy/beam ! Clean residual mean=0.000113 rms=0.002126 Jy/beam ! Combined flux in latest and established models = 0.391749 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.391749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109655Jy sigma=0.000646 ! Fit after self-cal, rms=0.109651Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.97 mas, bmaj=23.79 mas, bpa=11.98 degrees ! Estimated noise=3141.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.97 x 23.79 at 11.98 degrees (North through East) ! Clean map min=-0.0059475 max=0.36597 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=21.15 mas, bpa=11.58 degrees ! Estimated noise=4067.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.289854 Jy ! Component: 100 - total flux cleaned = 0.353205 Jy ! Component: 150 - total flux cleaned = 0.371859 Jy ! Component: 200 - total flux cleaned = 0.381065 Jy ! Total flux subtracted in 200 components = 0.381065 Jy ! Clean residual min=-0.011051 max=0.011404 Jy/beam ! Clean residual mean=0.000026 rms=0.002768 Jy/beam ! Combined flux in latest and established models = 0.381065 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.381065 Jy ! Inverting map and beam ! Estimated beam: bmin=3.97 mas, bmaj=23.79 mas, bpa=11.98 degrees ! Estimated noise=3141.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568759 Jy ! Component: 100 - total flux cleaned = 0.0085469 Jy ! Component: 150 - total flux cleaned = 0.00958622 Jy ! Component: 200 - total flux cleaned = 0.00969316 Jy ! Total flux subtracted in 200 components = 0.00969316 Jy ! Clean residual min=-0.006291 max=0.007717 Jy/beam ! Clean residual mean=0.000071 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 0.390758 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 48 components and 0.390758 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.732 mas, bmaj=35.69 mas, bpa=-1.357 degrees ! Estimated noise=3584.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017941 Jy ! Component: 100 - total flux cleaned = 0.000311922 Jy ! Component: 150 - total flux cleaned = 0.00039286 Jy ! Component: 200 - total flux cleaned = 0.000463019 Jy ! Total flux subtracted in 200 components = 0.000463019 Jy ! Clean residual min=-0.006612 max=0.006887 Jy/beam ! Clean residual mean=0.000110 rms=0.002118 Jy/beam ! Combined flux in latest and established models = 0.391221 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.13941e-05 Jy ! Component: 100 - total flux cleaned = 5.92983e-05 Jy ! Component: 150 - total flux cleaned = 9.28796e-05 Jy ! Component: 200 - total flux cleaned = 0.000108665 Jy ! Total flux subtracted in 200 components = 0.000108665 Jy ! Clean residual min=-0.006631 max=0.006805 Jy/beam ! Clean residual mean=0.000110 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.39133 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.39133 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.97 mas, bmaj=23.79 mas, bpa=11.98 degrees ! Estimated noise=3141.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000169152 Jy ! Component: 100 - total flux cleaned = -0.000127736 Jy ! Component: 150 - total flux cleaned = -9.31324e-05 Jy ! Component: 200 - total flux cleaned = -6.02399e-05 Jy ! Total flux subtracted in 200 components = -6.02399e-05 Jy ! Clean residual min=-0.006194 max=0.007640 Jy/beam ! Clean residual mean=0.000071 rms=0.001833 Jy/beam ! Combined flux in latest and established models = 0.391269 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.391269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109629Jy sigma=0.000646 ! Fit after self-cal, rms=0.109622Jy sigma=0.000646 wmodel J1036-3744_S_2017_05_31_pus_map.mod ! Writing 77 model components to file: J1036-3744_S_2017_05_31_pus_map.mod wobs J1036-3744_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_05_31_pus_uvs.fits wwins J1036-3744_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1036-3744_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200201 Jy ! Component: 100 - total flux cleaned = 0.00222396 Jy ! Component: 150 - total flux cleaned = 0.00243833 Jy ! Component: 200 - total flux cleaned = 0.00272539 Jy ! Component: 250 - total flux cleaned = 0.00308163 Jy ! Component: 300 - total flux cleaned = 0.00350902 Jy ! Component: 350 - total flux cleaned = 0.00383218 Jy ! Component: 400 - total flux cleaned = 0.00430088 Jy ! Component: 450 - total flux cleaned = 0.00490128 Jy ! Component: 500 - total flux cleaned = 0.00540257 Jy ! Component: 550 - total flux cleaned = 0.00588873 Jy ! Component: 600 - total flux cleaned = 0.00636055 Jy ! Component: 650 - total flux cleaned = 0.00675358 Jy ! Component: 700 - total flux cleaned = 0.00713412 Jy ! Component: 750 - total flux cleaned = 0.00738083 Jy ! Component: 800 - total flux cleaned = 0.00762033 Jy ! Component: 850 - total flux cleaned = 0.00791133 Jy ! Component: 900 - total flux cleaned = 0.00813626 Jy ! Component: 950 - total flux cleaned = 0.00835604 Jy ! Component: 1000 - total flux cleaned = 0.00856887 Jy ! Component: 1050 - total flux cleaned = 0.00862076 Jy ! Component: 1100 - total flux cleaned = 0.00882219 Jy ! Component: 1150 - total flux cleaned = 0.00896921 Jy ! Component: 1200 - total flux cleaned = 0.0089687 Jy ! Component: 1250 - total flux cleaned = 0.00920494 Jy ! Component: 1300 - total flux cleaned = 0.00934304 Jy ! Component: 1350 - total flux cleaned = 0.00956864 Jy ! Component: 1400 - total flux cleaned = 0.00974566 Jy ! Component: 1450 - total flux cleaned = 0.00996216 Jy ! Component: 1500 - total flux cleaned = 0.0100897 Jy ! Component: 1550 - total flux cleaned = 0.0102984 Jy ! Component: 1600 - total flux cleaned = 0.0104215 Jy ! Component: 1650 - total flux cleaned = 0.010462 Jy ! Component: 1700 - total flux cleaned = 0.0105023 Jy ! Component: 1750 - total flux cleaned = 0.0105421 Jy ! Component: 1800 - total flux cleaned = 0.0107367 Jy ! Component: 1850 - total flux cleaned = 0.0108514 Jy ! Component: 1900 - total flux cleaned = 0.0109649 Jy ! Component: 1950 - total flux cleaned = 0.0110023 Jy ! Component: 2000 - total flux cleaned = 0.0112232 Jy ! Component: 2050 - total flux cleaned = 0.0112229 Jy ! Component: 2100 - total flux cleaned = 0.011259 Jy ! Component: 2150 - total flux cleaned = 0.0113663 Jy ! Component: 2200 - total flux cleaned = 0.0115077 Jy ! Component: 2250 - total flux cleaned = 0.0115776 Jy ! Component: 2300 - total flux cleaned = 0.0116816 Jy ! Component: 2350 - total flux cleaned = 0.0117162 Jy ! Component: 2400 - total flux cleaned = 0.0118185 Jy ! Component: 2450 - total flux cleaned = 0.0119204 Jy ! Component: 2500 - total flux cleaned = 0.0120889 Jy ! Component: 2550 - total flux cleaned = 0.0122227 Jy ! Component: 2600 - total flux cleaned = 0.0123226 Jy ! Component: 2650 - total flux cleaned = 0.0124552 Jy ! Component: 2700 - total flux cleaned = 0.012521 Jy ! Component: 2750 - total flux cleaned = 0.0125867 Jy ! Component: 2800 - total flux cleaned = 0.0126521 Jy ! Component: 2850 - total flux cleaned = 0.0126845 Jy ! Component: 2900 - total flux cleaned = 0.0127495 Jy ! Component: 2950 - total flux cleaned = 0.0128143 Jy ! Component: 3000 - total flux cleaned = 0.0128465 Jy ! Component: 3050 - total flux cleaned = 0.0129426 Jy ! Component: 3100 - total flux cleaned = 0.0130384 Jy ! Component: 3150 - total flux cleaned = 0.0131018 Jy ! Component: 3200 - total flux cleaned = 0.0131654 Jy ! Component: 3250 - total flux cleaned = 0.013292 Jy ! Component: 3300 - total flux cleaned = 0.0133236 Jy ! Component: 3350 - total flux cleaned = 0.0134498 Jy ! Component: 3400 - total flux cleaned = 0.0135443 Jy ! Component: 3450 - total flux cleaned = 0.0136071 Jy ! Component: 3500 - total flux cleaned = 0.0136699 Jy ! Component: 3550 - total flux cleaned = 0.0137012 Jy ! Component: 3600 - total flux cleaned = 0.0137638 Jy ! Component: 3650 - total flux cleaned = 0.0138573 Jy ! Component: 3700 - total flux cleaned = 0.0138884 Jy ! Component: 3750 - total flux cleaned = 0.0139506 Jy ! Component: 3800 - total flux cleaned = 0.0139817 Jy ! Component: 3850 - total flux cleaned = 0.0140436 Jy ! Component: 3900 - total flux cleaned = 0.0141055 Jy ! Component: 3950 - total flux cleaned = 0.0141673 Jy ! Component: 4000 - total flux cleaned = 0.0141364 Jy ! Component: 4050 - total flux cleaned = 0.0142597 Jy ! Total flux subtracted in 4096 components = 0.0142289 Jy ! Clean residual min=-0.001684 max=0.001742 Jy/beam ! Clean residual mean=-0.000010 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.405498 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 347 components and 0.405498 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.97 x 23.79 at 11.98 degrees (North through East) ! Clean map min=-0.0046713 max=0.3706 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.370597 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000618924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.501023 0.501023 1.00205 2.00409 4.00818 8.01636 16.0327 32.0655 64.1309 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.37 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.97 x 23.79 at 11.98 degrees (North through East) ! Clean map min=-0.0046713 max=0.3706 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:45:58 2019