! Started logfile: J1036-3744_S_2017_05_01_pus_uvs.log on Wed May 1 18:33:28 2019 obs J1036-3744_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_05_01_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.624501 visibilities/baseline/integration-bin. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 4384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.648017Jy sigma=0.003124 ! Fit after self-cal, rms=0.615046Jy sigma=0.003021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=8.51 mas, bpa=-0.2508 degrees ! Estimated noise=3118.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.315084 Jy ! Component: 100 - total flux cleaned = 0.399567 Jy ! Total flux subtracted in 100 components = 0.399567 Jy ! Clean residual min=-0.020484 max=0.046598 Jy/beam ! Clean residual mean=-0.000000 rms=0.005449 Jy/beam ! Combined flux in latest and established models = 0.399567 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.399567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173641Jy sigma=0.000798 ! Fit after self-cal, rms=0.173540Jy sigma=0.000798 ! Inverting map ! Added new window around map position (-4.5, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429687 Jy ! Component: 100 - total flux cleaned = 0.0643817 Jy ! Total flux subtracted in 100 components = 0.0643817 Jy ! Clean residual min=-0.014297 max=0.028372 Jy/beam ! Clean residual mean=0.000008 rms=0.003776 Jy/beam ! Combined flux in latest and established models = 0.463948 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.463948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162260Jy sigma=0.000727 ! Fit after self-cal, rms=0.161507Jy sigma=0.000722 ! Inverting map ! Added new window around map position (-8, 28). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020694 Jy ! Component: 100 - total flux cleaned = 0.0243112 Jy ! Total flux subtracted in 100 components = 0.0243112 Jy ! Clean residual min=-0.013619 max=0.020151 Jy/beam ! Clean residual mean=0.000019 rms=0.003255 Jy/beam ! Combined flux in latest and established models = 0.48826 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 0.48826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159055Jy sigma=0.000713 ! Fit after self-cal, rms=0.158726Jy sigma=0.000710 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.443 mas, bmaj=10.9 mas, bpa=0.3961 degrees ! Estimated noise=2363.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689892 Jy ! Component: 100 - total flux cleaned = 0.00673386 Jy ! Component: 150 - total flux cleaned = 0.006241 Jy ! Component: 200 - total flux cleaned = 0.00593286 Jy ! Total flux subtracted in 200 components = 0.00593286 Jy ! Clean residual min=-0.011214 max=0.012904 Jy/beam ! Clean residual mean=-0.000010 rms=0.002903 Jy/beam ! Combined flux in latest and established models = 0.494192 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.494192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158067Jy sigma=0.000708 ! Fit after self-cal, rms=0.158032Jy sigma=0.000708 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 1.97 KP 1.02 ! LA 1.02 MK 0.98 NL 0.94 OV 1.00 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.73 KP 1.01 ! LA 0.97 MK 1.02 NL 1.02 OV 1.04 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.09 KP 1.02 ! LA 0.98 MK 1.09 NL 1.04 OV 0.90 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 1.00 KP 1.00* ! LA 0.78 MK 0.97 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.158032Jy sigma=0.000708 ! Fit after self-cal, rms=0.178209Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.45 mas, bmaj=10.88 mas, bpa=0.7937 degrees ! Estimated noise=2418.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00446877 Jy ! Component: 100 - total flux cleaned = -0.00530305 Jy ! Component: 150 - total flux cleaned = -0.00597036 Jy ! Component: 200 - total flux cleaned = -0.00654411 Jy ! Total flux subtracted in 200 components = -0.00654411 Jy ! Clean residual min=-0.007660 max=0.008002 Jy/beam ! Clean residual mean=0.000003 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.487648 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.487648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177640Jy sigma=0.000683 ! Fit after self-cal, rms=0.177660Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177660Jy sigma=0.000683 ! Fit after self-cal, rms=0.181036Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.452 mas, bmaj=10.87 mas, bpa=0.7827 degrees ! Estimated noise=2420.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0026938 Jy ! Component: 100 - total flux cleaned = -0.00313652 Jy ! Component: 150 - total flux cleaned = -0.00363601 Jy ! Component: 200 - total flux cleaned = -0.00406293 Jy ! Total flux subtracted in 200 components = -0.00406293 Jy ! Clean residual min=-0.006851 max=0.007407 Jy/beam ! Clean residual mean=-0.000007 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 0.483585 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.483585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180740Jy sigma=0.000680 ! Fit after self-cal, rms=0.180718Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000784983 Jy ! Component: 100 - total flux cleaned = -0.000978297 Jy ! Component: 150 - total flux cleaned = -0.00130794 Jy ! Component: 200 - total flux cleaned = -0.00153935 Jy ! Total flux subtracted in 200 components = -0.00153935 Jy ! Clean residual min=-0.006746 max=0.007405 Jy/beam ! Clean residual mean=-0.000010 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.482046 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.482046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180601Jy sigma=0.000680 ! Fit after self-cal, rms=0.180579Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180579Jy sigma=0.000680 ! Fit after self-cal, rms=0.218438Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=10.86 mas, bpa=0.7889 degrees ! Estimated noise=2427.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00251568 Jy ! Component: 100 - total flux cleaned = -0.00291019 Jy ! Component: 150 - total flux cleaned = -0.00335836 Jy ! Component: 200 - total flux cleaned = -0.003658 Jy ! Total flux subtracted in 200 components = -0.003658 Jy ! Clean residual min=-0.006565 max=0.005980 Jy/beam ! Clean residual mean=0.000014 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.478388 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 0.478388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218220Jy sigma=0.000670 ! Fit after self-cal, rms=0.218320Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00078602 Jy ! Component: 100 - total flux cleaned = -0.00104091 Jy ! Component: 150 - total flux cleaned = -0.00119678 Jy ! Component: 200 - total flux cleaned = -0.00149227 Jy ! Total flux subtracted in 200 components = -0.00149227 Jy ! Clean residual min=-0.006599 max=0.006065 Jy/beam ! Clean residual mean=0.000011 rms=0.001535 Jy/beam ! Combined flux in latest and established models = 0.476896 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 0.476896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218230Jy sigma=0.000669 ! Fit after self-cal, rms=0.218224Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218224Jy sigma=0.000669 ! Fit after self-cal, rms=0.222569Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.655 mas, bmaj=29.03 mas, bpa=-2.531 degrees ! Estimated noise=2860.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208026 Jy ! Component: 100 - total flux cleaned = -0.00238318 Jy ! Component: 150 - total flux cleaned = -0.00242045 Jy ! Component: 200 - total flux cleaned = -0.00249236 Jy ! Total flux subtracted in 200 components = -0.00249236 Jy ! Clean residual min=-0.006544 max=0.005062 Jy/beam ! Clean residual mean=0.000017 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.474404 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 98 components and 0.474403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222511Jy sigma=0.000669 ! Fit after self-cal, rms=0.222526Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152861 Jy ! Component: 100 - total flux cleaned = -0.000224514 Jy ! Component: 150 - total flux cleaned = -0.000289548 Jy ! Component: 200 - total flux cleaned = -0.000322106 Jy ! Total flux subtracted in 200 components = -0.000322106 Jy ! Clean residual min=-0.006573 max=0.005084 Jy/beam ! Clean residual mean=0.000015 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 0.474081 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 100 components and 0.474081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222494Jy sigma=0.000669 ! Fit after self-cal, rms=0.222481Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=10.85 mas, bpa=0.7577 degrees ! Estimated noise=2424.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.455 x 10.85 at 0.7577 degrees (North through East) ! Clean map min=-0.0064085 max=0.36317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=8.401 mas, bpa=0.1286 degrees ! Estimated noise=3256.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.327568 Jy ! Component: 100 - total flux cleaned = 0.407208 Jy ! Component: 150 - total flux cleaned = 0.439119 Jy ! Component: 200 - total flux cleaned = 0.455916 Jy ! Total flux subtracted in 200 components = 0.455916 Jy ! Clean residual min=-0.008983 max=0.010348 Jy/beam ! Clean residual mean=0.000020 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.455916 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.455916 Jy ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=10.85 mas, bpa=0.7577 degrees ! Estimated noise=2424.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120912 Jy ! Component: 100 - total flux cleaned = 0.0156748 Jy ! Component: 150 - total flux cleaned = 0.0167655 Jy ! Component: 200 - total flux cleaned = 0.0178107 Jy ! Total flux subtracted in 200 components = 0.0178107 Jy ! Clean residual min=-0.006240 max=0.005948 Jy/beam ! Clean residual mean=0.000014 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.473726 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.473726 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.655 mas, bmaj=29.03 mas, bpa=-2.531 degrees ! Estimated noise=2860.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022411 Jy ! Component: 100 - total flux cleaned = 0.00232808 Jy ! Component: 150 - total flux cleaned = 0.00240853 Jy ! Component: 200 - total flux cleaned = 0.00241089 Jy ! Total flux subtracted in 200 components = 0.00241089 Jy ! Clean residual min=-0.006943 max=0.005447 Jy/beam ! Clean residual mean=0.000025 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.476137 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.53873e-06 Jy ! Component: 100 - total flux cleaned = 6.33469e-05 Jy ! Component: 150 - total flux cleaned = 6.61016e-05 Jy ! Component: 200 - total flux cleaned = 2.77836e-06 Jy ! Total flux subtracted in 200 components = 2.77836e-06 Jy ! Clean residual min=-0.006835 max=0.005307 Jy/beam ! Clean residual mean=0.000025 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.47614 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.47614 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=10.85 mas, bpa=0.7577 degrees ! Estimated noise=2424.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.75249e-05 Jy ! Component: 100 - total flux cleaned = -0.000206179 Jy ! Component: 150 - total flux cleaned = -0.000207649 Jy ! Component: 200 - total flux cleaned = -0.000373183 Jy ! Total flux subtracted in 200 components = -0.000373183 Jy ! Clean residual min=-0.006188 max=0.005696 Jy/beam ! Clean residual mean=0.000017 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.475767 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.475767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222446Jy sigma=0.000668 ! Fit after self-cal, rms=0.222485Jy sigma=0.000668 wmodel J1036-3744_S_2017_05_01_pus_map.mod ! Writing 86 model components to file: J1036-3744_S_2017_05_01_pus_map.mod wobs J1036-3744_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_05_01_pus_uvs.fits wwins J1036-3744_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J1036-3744_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000706827 Jy ! Component: 100 - total flux cleaned = -0.00109675 Jy ! Component: 150 - total flux cleaned = -0.00128201 Jy ! Component: 200 - total flux cleaned = -0.00145492 Jy ! Component: 250 - total flux cleaned = -0.00153611 Jy ! Component: 300 - total flux cleaned = -0.00153566 Jy ! Component: 350 - total flux cleaned = -0.00130265 Jy ! Component: 400 - total flux cleaned = -0.00122635 Jy ! Component: 450 - total flux cleaned = -0.000782514 Jy ! Component: 500 - total flux cleaned = -0.000422202 Jy ! Component: 550 - total flux cleaned = -0.000139566 Jy ! Component: 600 - total flux cleaned = 0.00013574 Jy ! Component: 650 - total flux cleaned = 0.00033876 Jy ! Component: 700 - total flux cleaned = 0.000604776 Jy ! Component: 750 - total flux cleaned = 0.000930613 Jy ! Component: 800 - total flux cleaned = 0.00118815 Jy ! Component: 850 - total flux cleaned = 0.00150279 Jy ! Component: 900 - total flux cleaned = 0.00187364 Jy ! Component: 950 - total flux cleaned = 0.00205519 Jy ! Component: 1000 - total flux cleaned = 0.00229392 Jy ! Component: 1050 - total flux cleaned = 0.00253101 Jy ! Component: 1100 - total flux cleaned = 0.00288065 Jy ! Component: 1150 - total flux cleaned = 0.00282329 Jy ! Component: 1200 - total flux cleaned = 0.00316389 Jy ! Component: 1250 - total flux cleaned = 0.00327492 Jy ! Component: 1300 - total flux cleaned = 0.00332952 Jy ! Component: 1350 - total flux cleaned = 0.00322017 Jy ! Component: 1400 - total flux cleaned = 0.00327489 Jy ! Component: 1450 - total flux cleaned = 0.00343562 Jy ! Component: 1500 - total flux cleaned = 0.00354071 Jy ! Component: 1550 - total flux cleaned = 0.00359239 Jy ! Component: 1600 - total flux cleaned = 0.00359253 Jy ! Component: 1650 - total flux cleaned = 0.0035929 Jy ! Component: 1700 - total flux cleaned = 0.00364365 Jy ! Component: 1750 - total flux cleaned = 0.00374317 Jy ! Component: 1800 - total flux cleaned = 0.00374335 Jy ! Component: 1850 - total flux cleaned = 0.00384068 Jy ! Component: 1900 - total flux cleaned = 0.00374439 Jy ! Component: 1950 - total flux cleaned = 0.00393525 Jy ! Component: 2000 - total flux cleaned = 0.00393507 Jy ! Component: 2050 - total flux cleaned = 0.00407605 Jy ! Component: 2100 - total flux cleaned = 0.00421434 Jy ! Component: 2150 - total flux cleaned = 0.00416812 Jy ! Component: 2200 - total flux cleaned = 0.00425907 Jy ! Component: 2250 - total flux cleaned = 0.00430393 Jy ! Component: 2300 - total flux cleaned = 0.00425929 Jy ! Component: 2350 - total flux cleaned = 0.00443644 Jy ! Component: 2400 - total flux cleaned = 0.00456816 Jy ! Component: 2450 - total flux cleaned = 0.00452467 Jy ! Component: 2500 - total flux cleaned = 0.00465369 Jy ! Component: 2550 - total flux cleaned = 0.00456731 Jy ! Component: 2600 - total flux cleaned = 0.00448259 Jy ! Component: 2650 - total flux cleaned = 0.00473584 Jy ! Component: 2700 - total flux cleaned = 0.00469368 Jy ! Component: 2750 - total flux cleaned = 0.0047347 Jy ! Component: 2800 - total flux cleaned = 0.0046516 Jy ! Component: 2850 - total flux cleaned = 0.00461078 Jy ! Component: 2900 - total flux cleaned = 0.0046517 Jy ! Component: 2950 - total flux cleaned = 0.00481321 Jy ! Component: 3000 - total flux cleaned = 0.00469285 Jy ! Component: 3050 - total flux cleaned = 0.00481218 Jy ! Component: 3100 - total flux cleaned = 0.00496966 Jy ! Component: 3150 - total flux cleaned = 0.00489092 Jy ! Component: 3200 - total flux cleaned = 0.00477396 Jy ! Component: 3250 - total flux cleaned = 0.00492925 Jy ! Component: 3300 - total flux cleaned = 0.00485232 Jy ! Component: 3350 - total flux cleaned = 0.00500566 Jy ! Component: 3400 - total flux cleaned = 0.0049679 Jy ! Component: 3450 - total flux cleaned = 0.00519441 Jy ! Component: 3500 - total flux cleaned = 0.00515621 Jy ! Component: 3550 - total flux cleaned = 0.00504376 Jy ! Component: 3600 - total flux cleaned = 0.0050067 Jy ! Component: 3650 - total flux cleaned = 0.00500679 Jy ! Component: 3700 - total flux cleaned = 0.00497015 Jy ! Component: 3750 - total flux cleaned = 0.0050067 Jy ! Component: 3800 - total flux cleaned = 0.00489841 Jy ! Component: 3850 - total flux cleaned = 0.00486252 Jy ! Component: 3900 - total flux cleaned = 0.0048628 Jy ! Component: 3950 - total flux cleaned = 0.00489817 Jy ! Component: 4000 - total flux cleaned = 0.00479226 Jy ! Component: 4050 - total flux cleaned = 0.00486244 Jy ! Total flux subtracted in 4096 components = 0.00493192 Jy ! Clean residual min=-0.002235 max=0.001913 Jy/beam ! Clean residual mean=-0.000003 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.480699 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 392 components and 0.480699 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.455 x 10.85 at 0.7577 degrees (North through East) ! Clean map min=-0.0052968 max=0.38538 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.385383 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000683798 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.5323 0.5323 1.0646 2.1292 4.2584 8.51679 17.0336 34.0672 68.1343 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.385 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.455 x 10.85 at 0.7577 degrees (North through East) ! Clean map min=-0.0052968 max=0.38538 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:33:33 2019