! Started logfile: J1036-3744_S_2017_04_28_pus_uvs.log on Thu May 2 16:23:01 2019 obs J1036-3744_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_04_28_pus_uva.fits ! AN table 1: 6 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.333333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.592575Jy sigma=0.003336 ! Fit after self-cal, rms=0.586521Jy sigma=0.003303 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=30.46 mas, bpa=-4.24 degrees ! Estimated noise=9203.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.326521 Jy ! Component: 100 - total flux cleaned = 0.39219 Jy ! Total flux subtracted in 100 components = 0.39219 Jy ! Clean residual min=-0.024290 max=0.024239 Jy/beam ! Clean residual mean=-0.000002 rms=0.009012 Jy/beam ! Combined flux in latest and established models = 0.39219 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.39219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133919Jy sigma=0.000701 ! Fit after self-cal, rms=0.133870Jy sigma=0.000701 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.462 mas, bmaj=29.87 mas, bpa=-4.511 degrees ! Estimated noise=7568.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181561 Jy ! Component: 100 - total flux cleaned = 0.0201516 Jy ! Component: 150 - total flux cleaned = 0.0238662 Jy ! Component: 200 - total flux cleaned = 0.0268626 Jy ! Total flux subtracted in 200 components = 0.0268626 Jy ! Clean residual min=-0.009035 max=0.008983 Jy/beam ! Clean residual mean=0.000031 rms=0.003674 Jy/beam ! Combined flux in latest and established models = 0.419052 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 76 components and 0.419052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121053Jy sigma=0.000640 ! Fit after self-cal, rms=0.120767Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.00* KP 1.01 ! LA 0.98 MK 0.98 NL 1.00* OV 1.03 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.02 ! LA 0.97 MK 1.02 NL 1.00* OV 0.98 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.97 ! LA 0.95 MK 1.02 NL 1.00* OV 0.97 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.120767Jy sigma=0.000639 ! Fit after self-cal, rms=0.114666Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=29.3 mas, bpa=-4.555 degrees ! Estimated noise=7600.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220384 Jy ! Component: 100 - total flux cleaned = -0.000655913 Jy ! Component: 150 - total flux cleaned = -0.00065021 Jy ! Component: 200 - total flux cleaned = -0.000665937 Jy ! Total flux subtracted in 200 components = -0.000665937 Jy ! Clean residual min=-0.003861 max=0.003908 Jy/beam ! Clean residual mean=0.000032 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.418386 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 133 components and 0.418387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113222Jy sigma=0.000622 ! Fit after self-cal, rms=0.113167Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113167Jy sigma=0.000622 ! Fit after self-cal, rms=0.113303Jy sigma=0.000621 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=29.33 mas, bpa=-4.552 degrees ! Estimated noise=7624.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140397 Jy ! Component: 100 - total flux cleaned = 0.00181412 Jy ! Component: 150 - total flux cleaned = 0.00200307 Jy ! Component: 200 - total flux cleaned = 0.00219343 Jy ! Total flux subtracted in 200 components = 0.00219343 Jy ! Clean residual min=-0.003186 max=0.003252 Jy/beam ! Clean residual mean=0.000036 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.42058 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 189 components and 0.42058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112720Jy sigma=0.000618 ! Fit after self-cal, rms=0.112704Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203725 Jy ! Component: 100 - total flux cleaned = -0.00218132 Jy ! Component: 150 - total flux cleaned = -0.00286726 Jy ! Component: 200 - total flux cleaned = -0.00410656 Jy ! Total flux subtracted in 200 components = -0.00410656 Jy ! Clean residual min=-0.002278 max=0.002298 Jy/beam ! Clean residual mean=0.000029 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.416474 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 244 components and 0.416473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112399Jy sigma=0.000616 ! Fit after self-cal, rms=0.112383Jy sigma=0.000616 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112383Jy sigma=0.000616 ! Fit after self-cal, rms=0.112479Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.584 mas, bmaj=29.34 mas, bpa=-4.549 degrees ! Estimated noise=7640.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212195 Jy ! Component: 100 - total flux cleaned = 0.00200288 Jy ! Component: 150 - total flux cleaned = 0.00212468 Jy ! Component: 200 - total flux cleaned = 0.00235212 Jy ! Total flux subtracted in 200 components = 0.00235212 Jy ! Clean residual min=-0.001876 max=0.001882 Jy/beam ! Clean residual mean=0.000028 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.418825 Jy selfcal ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 295 components and 0.418825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112233Jy sigma=0.000614 ! Fit after self-cal, rms=0.112236Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202571 Jy ! Component: 100 - total flux cleaned = -0.00061437 Jy ! Component: 150 - total flux cleaned = -0.00133462 Jy ! Component: 200 - total flux cleaned = -0.00184816 Jy ! Total flux subtracted in 200 components = -0.00184816 Jy ! Clean residual min=-0.001710 max=0.001757 Jy/beam ! Clean residual mean=0.000034 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.416977 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 330 components and 0.416977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112094Jy sigma=0.000613 ! Fit after self-cal, rms=0.112080Jy sigma=0.000613 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112080Jy sigma=0.000613 ! Fit after self-cal, rms=0.112206Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.948 mas, bmaj=34.86 mas, bpa=7.982 degrees ! Estimated noise=9542.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002374 Jy ! Component: 100 - total flux cleaned = 0.00371335 Jy ! Component: 150 - total flux cleaned = 0.00428481 Jy ! Component: 200 - total flux cleaned = 0.00476365 Jy ! Total flux subtracted in 200 components = 0.00476365 Jy ! Clean residual min=-0.001321 max=0.001329 Jy/beam ! Clean residual mean=0.000066 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.421741 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 401 components and 0.421741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112101Jy sigma=0.000612 ! Fit after self-cal, rms=0.112102Jy sigma=0.000612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358864 Jy ! Component: 100 - total flux cleaned = 0.000816601 Jy ! Component: 150 - total flux cleaned = 0.00150224 Jy ! Component: 200 - total flux cleaned = 0.00225543 Jy ! Total flux subtracted in 200 components = 0.00225543 Jy ! Clean residual min=-0.001047 max=0.001045 Jy/beam ! Clean residual mean=0.000043 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.423996 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 452 components and 0.423996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112031Jy sigma=0.000612 ! Fit after self-cal, rms=0.112034Jy sigma=0.000612 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=29.35 mas, bpa=-4.547 degrees ! Estimated noise=7651.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 29.35 at -4.547 degrees (North through East) ! Clean map min=-0.010386 max=0.39793 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=30.17 mas, bpa=-4.396 degrees ! Estimated noise=9176.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.32105 Jy ! Component: 100 - total flux cleaned = 0.391769 Jy ! Component: 150 - total flux cleaned = 0.39861 Jy ! Component: 200 - total flux cleaned = 0.397667 Jy ! Total flux subtracted in 200 components = 0.397667 Jy ! Clean residual min=-0.011415 max=0.011525 Jy/beam ! Clean residual mean=0.000053 rms=0.004781 Jy/beam ! Combined flux in latest and established models = 0.397667 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.397667 Jy ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=29.35 mas, bpa=-4.547 degrees ! Estimated noise=7651.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897383 Jy ! Component: 100 - total flux cleaned = 0.00844279 Jy ! Component: 150 - total flux cleaned = 0.0080504 Jy ! Component: 200 - total flux cleaned = 0.00688764 Jy ! Total flux subtracted in 200 components = 0.00688764 Jy ! Clean residual min=-0.006483 max=0.006471 Jy/beam ! Clean residual mean=0.000022 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.404554 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 105 components and 0.404554 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.948 mas, bmaj=34.86 mas, bpa=7.982 degrees ! Estimated noise=9542.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684233 Jy ! Component: 100 - total flux cleaned = 0.00656957 Jy ! Component: 150 - total flux cleaned = 0.00787291 Jy ! Component: 200 - total flux cleaned = 0.0102834 Jy ! Total flux subtracted in 200 components = 0.0102834 Jy ! Clean residual min=-0.002800 max=0.002815 Jy/beam ! Clean residual mean=0.000094 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 0.414838 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173867 Jy ! Component: 100 - total flux cleaned = 0.00346448 Jy ! Component: 150 - total flux cleaned = 0.00459039 Jy ! Component: 200 - total flux cleaned = 0.00489376 Jy ! Total flux subtracted in 200 components = 0.00489376 Jy ! Clean residual min=-0.002625 max=0.002592 Jy/beam ! Clean residual mean=0.000118 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.419732 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 209 components and 0.419731 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=29.35 mas, bpa=-4.547 degrees ! Estimated noise=7651.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275396 Jy ! Component: 100 - total flux cleaned = 0.000654446 Jy ! Component: 150 - total flux cleaned = 0.000644611 Jy ! Component: 200 - total flux cleaned = 0.000785323 Jy ! Total flux subtracted in 200 components = 0.000785323 Jy ! Clean residual min=-0.002368 max=0.002355 Jy/beam ! Clean residual mean=0.000033 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.420517 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 261 components and 0.420517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112616Jy sigma=0.000615 ! Fit after self-cal, rms=0.112626Jy sigma=0.000615 wmodel J1036-3744_S_2017_04_28_pus_map.mod ! Writing 261 model components to file: J1036-3744_S_2017_04_28_pus_map.mod wobs J1036-3744_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_04_28_pus_uvs.fits wwins J1036-3744_S_2017_04_28_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1036-3744_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 29.35 at -4.547 degrees (North through East) ! Clean map min=-0.0084408 max=0.38676 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.386759 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00100085 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.776334 0.776334 1.55267 3.10534 6.21068 12.4214 24.8427 49.6854 99.3708 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.386 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.583 x 29.35 at -4.547 degrees (North through East) ! Clean map min=-0.0084408 max=0.38676 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:23:04 2019