! Started logfile: J1036-3744_S_2017_02_19_pus_uvs.log on Sat May 4 18:48:55 2019 obs J1036-3744_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.211111 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.677636Jy sigma=0.003184 ! Fit after self-cal, rms=0.666560Jy sigma=0.003132 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=20.33 mas, bpa=-3.938 degrees ! Estimated noise=12745.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.281532 Jy ! Component: 100 - total flux cleaned = 0.353573 Jy ! Total flux subtracted in 100 components = 0.353573 Jy ! Clean residual min=-0.034032 max=0.034139 Jy/beam ! Clean residual mean=-0.000860 rms=0.011402 Jy/beam ! Combined flux in latest and established models = 0.353573 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.353573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165435Jy sigma=0.000692 ! Fit after self-cal, rms=0.166056Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.845 mas, bmaj=23.64 mas, bpa=-4.196 degrees ! Estimated noise=11485.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111296 Jy ! Component: 100 - total flux cleaned = 0.0073372 Jy ! Component: 150 - total flux cleaned = 0.000409423 Jy ! Component: 200 - total flux cleaned = -0.00268898 Jy ! Total flux subtracted in 200 components = -0.00268898 Jy ! Clean residual min=-0.007813 max=0.007704 Jy/beam ! Clean residual mean=-0.000232 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.350884 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 88 components and 0.350884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155217Jy sigma=0.000633 ! Fit after self-cal, rms=0.155394Jy sigma=0.000631 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.93 ! LA 1.04 MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.07 ! LA 1.03 MK 1.00* NL 1.05 OV 1.00* ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.00* ! LA 0.82 MK 1.00* NL 1.00 OV 1.00* ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.155394Jy sigma=0.000631 ! Fit after self-cal, rms=0.148149Jy sigma=0.000610 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=24.1 mas, bpa=-4.263 degrees ! Estimated noise=11515.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00932649 Jy ! Component: 100 - total flux cleaned = 0.0147258 Jy ! Component: 150 - total flux cleaned = 0.0170253 Jy ! Component: 200 - total flux cleaned = 0.0185394 Jy ! Total flux subtracted in 200 components = 0.0185394 Jy ! Clean residual min=-0.004913 max=0.004927 Jy/beam ! Clean residual mean=-0.000024 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.369424 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 138 components and 0.369424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146225Jy sigma=0.000602 ! Fit after self-cal, rms=0.145948Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145948Jy sigma=0.000601 ! Fit after self-cal, rms=0.143232Jy sigma=0.000600 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=24.07 mas, bpa=-4.307 degrees ! Estimated noise=11450 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457566 Jy ! Component: 100 - total flux cleaned = 0.00687147 Jy ! Component: 150 - total flux cleaned = 0.00665357 Jy ! Component: 200 - total flux cleaned = 0.00623718 Jy ! Total flux subtracted in 200 components = 0.00623718 Jy ! Clean residual min=-0.003447 max=0.003429 Jy/beam ! Clean residual mean=0.000004 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.375661 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 177 components and 0.375661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142334Jy sigma=0.000596 ! Fit after self-cal, rms=0.142143Jy sigma=0.000596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670525 Jy ! Component: 100 - total flux cleaned = 0.000129671 Jy ! Component: 150 - total flux cleaned = -3.45307e-05 Jy ! Component: 200 - total flux cleaned = -3.87032e-05 Jy ! Total flux subtracted in 200 components = -3.87032e-05 Jy ! Clean residual min=-0.002746 max=0.002746 Jy/beam ! Clean residual mean=0.000013 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.375622 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 211 components and 0.375622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141638Jy sigma=0.000594 ! Fit after self-cal, rms=0.141547Jy sigma=0.000594 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141547Jy sigma=0.000594 ! Fit after self-cal, rms=0.139746Jy sigma=0.000593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.86 mas, bmaj=24.01 mas, bpa=-4.324 degrees ! Estimated noise=11402.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224551 Jy ! Component: 100 - total flux cleaned = 0.00274625 Jy ! Component: 150 - total flux cleaned = 0.00306036 Jy ! Component: 200 - total flux cleaned = 0.0029106 Jy ! Total flux subtracted in 200 components = 0.0029106 Jy ! Clean residual min=-0.002472 max=0.002459 Jy/beam ! Clean residual mean=0.000027 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.378533 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 234 components and 0.378533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139341Jy sigma=0.000591 ! Fit after self-cal, rms=0.139253Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.61374e-05 Jy ! Component: 100 - total flux cleaned = -5.27909e-05 Jy ! Component: 150 - total flux cleaned = -0.000307271 Jy ! Component: 200 - total flux cleaned = -0.000438048 Jy ! Total flux subtracted in 200 components = -0.000438048 Jy ! Clean residual min=-0.002045 max=0.002073 Jy/beam ! Clean residual mean=0.000015 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.378095 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 253 components and 0.378095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138988Jy sigma=0.000590 ! Fit after self-cal, rms=0.138929Jy sigma=0.000590 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138929Jy sigma=0.000590 ! Fit after self-cal, rms=0.137721Jy sigma=0.000590 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.581 mas, bmaj=22.96 mas, bpa=-7.882 degrees ! Estimated noise=14500.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142376 Jy ! Component: 100 - total flux cleaned = 0.00128331 Jy ! Component: 150 - total flux cleaned = 0.00084599 Jy ! Component: 200 - total flux cleaned = 0.000844264 Jy ! Total flux subtracted in 200 components = 0.000844264 Jy ! Clean residual min=-0.002873 max=0.002822 Jy/beam ! Clean residual mean=-0.000052 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.378939 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 278 components and 0.378939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137505Jy sigma=0.000589 ! Fit after self-cal, rms=0.137450Jy sigma=0.000589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000740835 Jy ! Component: 100 - total flux cleaned = -0.000995057 Jy ! Component: 150 - total flux cleaned = -0.00112004 Jy ! Component: 200 - total flux cleaned = -0.000840112 Jy ! Total flux subtracted in 200 components = -0.000840112 Jy ! Clean residual min=-0.002417 max=0.002438 Jy/beam ! Clean residual mean=0.000094 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.378099 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 307 components and 0.378099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137273Jy sigma=0.000588 ! Fit after self-cal, rms=0.137230Jy sigma=0.000588 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=23.97 mas, bpa=-4.334 degrees ! Estimated noise=11364.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.863 x 23.97 at -4.334 degrees (North through East) ! Clean map min=-0.021865 max=0.27092 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=20.68 mas, bpa=-3.948 degrees ! Estimated noise=12610.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273224 Jy ! Component: 100 - total flux cleaned = 0.340762 Jy ! Component: 150 - total flux cleaned = 0.350621 Jy ! Component: 200 - total flux cleaned = 0.34937 Jy ! Total flux subtracted in 200 components = 0.34937 Jy ! Clean residual min=-0.015079 max=0.014870 Jy/beam ! Clean residual mean=-0.000335 rms=0.005752 Jy/beam ! Combined flux in latest and established models = 0.34937 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.34937 Jy ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=23.97 mas, bpa=-4.334 degrees ! Estimated noise=11364.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132289 Jy ! Component: 100 - total flux cleaned = 0.00787577 Jy ! Component: 150 - total flux cleaned = 0.0106325 Jy ! Component: 200 - total flux cleaned = 0.0117025 Jy ! Total flux subtracted in 200 components = 0.0117025 Jy ! Clean residual min=-0.005598 max=0.005644 Jy/beam ! Clean residual mean=-0.000204 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 0.361072 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 140 components and 0.361072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.581 mas, bmaj=22.96 mas, bpa=-7.882 degrees ! Estimated noise=14500.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234391 Jy ! Component: 100 - total flux cleaned = -0.00233994 Jy ! Component: 150 - total flux cleaned = -0.00140811 Jy ! Component: 200 - total flux cleaned = -0.00104151 Jy ! Total flux subtracted in 200 components = -0.00104151 Jy ! Clean residual min=-0.006370 max=0.006275 Jy/beam ! Clean residual mean=0.000189 rms=0.001893 Jy/beam ! Combined flux in latest and established models = 0.360031 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440033 Jy ! Component: 100 - total flux cleaned = 0.000460142 Jy ! Component: 150 - total flux cleaned = 0.00044293 Jy ! Component: 200 - total flux cleaned = 0.00113394 Jy ! Total flux subtracted in 200 components = 0.00113394 Jy ! Clean residual min=-0.012683 max=0.012621 Jy/beam ! Clean residual mean=0.000661 rms=0.003801 Jy/beam ! Combined flux in latest and established models = 0.361164 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 191 components and 0.361164 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.863 mas, bmaj=23.97 mas, bpa=-4.334 degrees ! Estimated noise=11364.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445966 Jy ! Component: 100 - total flux cleaned = 0.0064958 Jy ! Component: 150 - total flux cleaned = 0.00707453 Jy ! Component: 200 - total flux cleaned = 0.00606608 Jy ! Total flux subtracted in 200 components = 0.00606608 Jy ! Clean residual min=-0.003876 max=0.003886 Jy/beam ! Clean residual mean=-0.000034 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.36723 Jy selfcal ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 256 components and 0.367231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137600Jy sigma=0.000590 ! Fit after self-cal, rms=0.137599Jy sigma=0.000590 wmodel J1036-3744_S_2017_02_19_pus_map.mod ! Writing 256 model components to file: J1036-3744_S_2017_02_19_pus_map.mod wobs J1036-3744_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_02_19_pus_uvs.fits wwins J1036-3744_S_2017_02_19_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1036-3744_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.863 x 23.97 at -4.334 degrees (North through East) ! Clean map min=-0.019739 max=0.26258 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.262578 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00118064 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34891 1.34891 2.69781 5.39562 10.7912 21.5825 43.165 86.3299 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.262 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.863 x 23.97 at -4.334 degrees (North through East) ! Clean map min=-0.019739 max=0.26258 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:48:58 2019