! Started logfile: J1036-3744_S_2017_01_21_pus_uvs.log on Sun May 5 15:52:33 2019 obs J1036-3744_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1036-3744_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.53125 visibilities/baseline/integration-bin. ! Found source: J1036-3744 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1036-3744_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.697736Jy sigma=0.003506 ! Fit after self-cal, rms=0.689518Jy sigma=0.003471 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=6.204 mas, bpa=10.05 degrees ! Estimated noise=7751.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254451 Jy ! Component: 100 - total flux cleaned = 0.310044 Jy ! Total flux subtracted in 100 components = 0.310044 Jy ! Clean residual min=-0.020146 max=0.018055 Jy/beam ! Clean residual mean=-0.000193 rms=0.005279 Jy/beam ! Combined flux in latest and established models = 0.310044 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.310044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146434Jy sigma=0.000660 ! Fit after self-cal, rms=0.146457Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=6.982 mas, bpa=7.925 degrees ! Estimated noise=6726.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161421 Jy ! Component: 100 - total flux cleaned = 0.0234227 Jy ! Component: 150 - total flux cleaned = 0.0272758 Jy ! Component: 200 - total flux cleaned = 0.027601 Jy ! Total flux subtracted in 200 components = 0.027601 Jy ! Clean residual min=-0.017336 max=0.013832 Jy/beam ! Clean residual mean=-0.000068 rms=0.004007 Jy/beam ! Combined flux in latest and established models = 0.337645 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.337645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144862Jy sigma=0.000651 ! Fit after self-cal, rms=0.144889Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00* LA 1.16 ! MK 1.07 NL 1.00* OV 0.97 PT 0.96 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* LA 0.98 ! MK 0.96 NL 1.16 OV 1.02 PT 0.93 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00* LA 0.94 ! MK 1.03 NL 1.08 OV 0.95 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* LA 1.00* ! MK 0.89 NL 1.00* OV 1.02 PT 0.94 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.144889Jy sigma=0.000651 ! Fit after self-cal, rms=0.147048Jy sigma=0.000637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=6.974 mas, bpa=7.678 degrees ! Estimated noise=6745.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703778 Jy ! Component: 100 - total flux cleaned = 0.000502903 Jy ! Component: 150 - total flux cleaned = 0.000410276 Jy ! Component: 200 - total flux cleaned = 0.000326172 Jy ! Total flux subtracted in 200 components = 0.000326172 Jy ! Clean residual min=-0.012953 max=0.012067 Jy/beam ! Clean residual mean=-0.000000 rms=0.003421 Jy/beam ! Combined flux in latest and established models = 0.337971 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.337971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146847Jy sigma=0.000637 ! Fit after self-cal, rms=0.147090Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147090Jy sigma=0.000637 ! Fit after self-cal, rms=0.147088Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=6.97 mas, bpa=7.681 degrees ! Estimated noise=6740.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364299 Jy ! Component: 100 - total flux cleaned = 0.000282098 Jy ! Component: 150 - total flux cleaned = 0.000206261 Jy ! Component: 200 - total flux cleaned = 0.00013445 Jy ! Total flux subtracted in 200 components = 0.00013445 Jy ! Clean residual min=-0.012987 max=0.011628 Jy/beam ! Clean residual mean=-0.000003 rms=0.003376 Jy/beam ! Combined flux in latest and established models = 0.338105 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.338105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146933Jy sigma=0.000637 ! Fit after self-cal, rms=0.146966Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015035 Jy ! Component: 100 - total flux cleaned = -4.91793e-06 Jy ! Component: 150 - total flux cleaned = -7.35275e-05 Jy ! Component: 200 - total flux cleaned = -0.000140407 Jy ! Total flux subtracted in 200 components = -0.000140407 Jy ! Clean residual min=-0.013031 max=0.011415 Jy/beam ! Clean residual mean=-0.000005 rms=0.003357 Jy/beam ! Combined flux in latest and established models = 0.337965 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.337965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146850Jy sigma=0.000636 ! Fit after self-cal, rms=0.146878Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146878Jy sigma=0.000636 ! Fit after self-cal, rms=0.146662Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.967 mas, bpa=7.673 degrees ! Estimated noise=6728.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144961 Jy ! Component: 100 - total flux cleaned = 7.49983e-05 Jy ! Component: 150 - total flux cleaned = 1.21641e-05 Jy ! Component: 200 - total flux cleaned = -4.70257e-05 Jy ! Total flux subtracted in 200 components = -4.70257e-05 Jy ! Clean residual min=-0.012965 max=0.011230 Jy/beam ! Clean residual mean=-0.000005 rms=0.003336 Jy/beam ! Combined flux in latest and established models = 0.337918 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.337918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146572Jy sigma=0.000636 ! Fit after self-cal, rms=0.146594Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.89711e-05 Jy ! Component: 100 - total flux cleaned = -9.33973e-05 Jy ! Component: 150 - total flux cleaned = -0.000199348 Jy ! Component: 200 - total flux cleaned = -0.000253005 Jy ! Total flux subtracted in 200 components = -0.000253005 Jy ! Clean residual min=-0.012989 max=0.011084 Jy/beam ! Clean residual mean=-0.000008 rms=0.003332 Jy/beam ! Combined flux in latest and established models = 0.337665 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.337665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146524Jy sigma=0.000636 ! Fit after self-cal, rms=0.146545Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146545Jy sigma=0.000636 ! Fit after self-cal, rms=0.146383Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.588 mas, bmaj=21.81 mas, bpa=7.694 degrees ! Estimated noise=9825.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014193 Jy ! Component: 100 - total flux cleaned = -0.00149733 Jy ! Component: 150 - total flux cleaned = -0.00161017 Jy ! Component: 200 - total flux cleaned = -0.00171704 Jy ! Total flux subtracted in 200 components = -0.00171704 Jy ! Clean residual min=-0.014359 max=0.011833 Jy/beam ! Clean residual mean=-0.000072 rms=0.004311 Jy/beam ! Combined flux in latest and established models = 0.335948 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 31 components and 0.335948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146349Jy sigma=0.000636 ! Fit after self-cal, rms=0.146357Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.06222e-05 Jy ! Component: 100 - total flux cleaned = -0.000178587 Jy ! Component: 150 - total flux cleaned = -0.00024585 Jy ! Component: 200 - total flux cleaned = -0.000343968 Jy ! Total flux subtracted in 200 components = -0.000343968 Jy ! Clean residual min=-0.014414 max=0.011778 Jy/beam ! Clean residual mean=-0.000083 rms=0.004306 Jy/beam ! Combined flux in latest and established models = 0.335604 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.335604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146331Jy sigma=0.000636 ! Fit after self-cal, rms=0.146340Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.965 mas, bpa=7.651 degrees ! Estimated noise=6718.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.596 x 6.965 at 7.651 degrees (North through East) ! Clean map min=-0.012761 max=0.32731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.268 mas, bmaj=6.168 mas, bpa=10.01 degrees ! Estimated noise=7746.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.252538 Jy ! Component: 100 - total flux cleaned = 0.309858 Jy ! Component: 150 - total flux cleaned = 0.325996 Jy ! Component: 200 - total flux cleaned = 0.333848 Jy ! Total flux subtracted in 200 components = 0.333848 Jy ! Clean residual min=-0.015687 max=0.014714 Jy/beam ! Clean residual mean=-0.000022 rms=0.004136 Jy/beam ! Combined flux in latest and established models = 0.333848 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.333848 Jy ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.965 mas, bpa=7.651 degrees ! Estimated noise=6718.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219606 Jy ! Component: 100 - total flux cleaned = 0.00256027 Jy ! Component: 150 - total flux cleaned = 0.00289948 Jy ! Component: 200 - total flux cleaned = 0.00321149 Jy ! Total flux subtracted in 200 components = 0.00321149 Jy ! Clean residual min=-0.012966 max=0.011965 Jy/beam ! Clean residual mean=-0.000012 rms=0.003453 Jy/beam ! Combined flux in latest and established models = 0.337059 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.337059 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.588 mas, bmaj=21.81 mas, bpa=7.694 degrees ! Estimated noise=9825.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000993666 Jy ! Component: 100 - total flux cleaned = -0.00099247 Jy ! Component: 150 - total flux cleaned = -0.0010752 Jy ! Component: 200 - total flux cleaned = -0.0011532 Jy ! Total flux subtracted in 200 components = -0.0011532 Jy ! Clean residual min=-0.014081 max=0.012293 Jy/beam ! Clean residual mean=-0.000073 rms=0.004290 Jy/beam ! Combined flux in latest and established models = 0.335906 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110855 Jy ! Component: 100 - total flux cleaned = -0.000180928 Jy ! Component: 150 - total flux cleaned = -0.000280874 Jy ! Component: 200 - total flux cleaned = -0.000343822 Jy ! Total flux subtracted in 200 components = -0.000343822 Jy ! Clean residual min=-0.014148 max=0.012219 Jy/beam ! Clean residual mean=-0.000084 rms=0.004282 Jy/beam ! Combined flux in latest and established models = 0.335562 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.335562 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.965 mas, bpa=7.651 degrees ! Estimated noise=6718.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104814 Jy ! Component: 100 - total flux cleaned = 0.0012905 Jy ! Component: 150 - total flux cleaned = 0.000928078 Jy ! Component: 200 - total flux cleaned = 0.000848895 Jy ! Total flux subtracted in 200 components = 0.000848895 Jy ! Clean residual min=-0.012854 max=0.011734 Jy/beam ! Clean residual mean=-0.000020 rms=0.003410 Jy/beam ! Combined flux in latest and established models = 0.336411 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.336411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146598Jy sigma=0.000637 ! Fit after self-cal, rms=0.146588Jy sigma=0.000637 wmodel J1036-3744_S_2017_01_21_pus_map.mod ! Writing 43 model components to file: J1036-3744_S_2017_01_21_pus_map.mod wobs J1036-3744_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1036-3744_S_2017_01_21_pus_uvs.fits wwins J1036-3744_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1036-3744_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191425 Jy ! Component: 100 - total flux cleaned = -0.00172404 Jy ! Component: 150 - total flux cleaned = -0.00135567 Jy ! Component: 200 - total flux cleaned = -0.00118754 Jy ! Component: 250 - total flux cleaned = -0.00102521 Jy ! Component: 300 - total flux cleaned = -0.000872384 Jy ! Component: 350 - total flux cleaned = -0.000725024 Jy ! Component: 400 - total flux cleaned = -0.000849035 Jy ! Component: 450 - total flux cleaned = -0.00109196 Jy ! Component: 500 - total flux cleaned = -0.00143839 Jy ! Component: 550 - total flux cleaned = -0.00121731 Jy ! Component: 600 - total flux cleaned = -0.00111058 Jy ! Component: 650 - total flux cleaned = -0.00100597 Jy ! Component: 700 - total flux cleaned = -0.0010039 Jy ! Component: 750 - total flux cleaned = -0.000909974 Jy ! Component: 800 - total flux cleaned = -0.00100361 Jy ! Component: 850 - total flux cleaned = -0.000914744 Jy ! Component: 900 - total flux cleaned = -0.000830756 Jy ! Component: 950 - total flux cleaned = -0.000497768 Jy ! Component: 1000 - total flux cleaned = 7.10148e-05 Jy ! Component: 1050 - total flux cleaned = 0.000707438 Jy ! Component: 1100 - total flux cleaned = 0.00125426 Jy ! Component: 1150 - total flux cleaned = 0.00186788 Jy ! Component: 1200 - total flux cleaned = 0.00232181 Jy ! Component: 1250 - total flux cleaned = 0.00276902 Jy ! Component: 1300 - total flux cleaned = 0.00335567 Jy ! Component: 1350 - total flux cleaned = 0.00378923 Jy ! Component: 1400 - total flux cleaned = 0.00414629 Jy ! Component: 1450 - total flux cleaned = 0.0046396 Jy ! Component: 1500 - total flux cleaned = 0.00512763 Jy ! Component: 1550 - total flux cleaned = 0.00547196 Jy ! Component: 1600 - total flux cleaned = 0.0058146 Jy ! Component: 1650 - total flux cleaned = 0.00636005 Jy ! Component: 1700 - total flux cleaned = 0.00683486 Jy ! Component: 1750 - total flux cleaned = 0.00724021 Jy ! Component: 1800 - total flux cleaned = 0.00764463 Jy ! Component: 1850 - total flux cleaned = 0.00798125 Jy ! Component: 1900 - total flux cleaned = 0.00838695 Jy ! Component: 1950 - total flux cleaned = 0.00872549 Jy ! Component: 2000 - total flux cleaned = 0.0090672 Jy ! Component: 2050 - total flux cleaned = 0.00934163 Jy ! Component: 2100 - total flux cleaned = 0.00968782 Jy ! Component: 2150 - total flux cleaned = 0.0100376 Jy ! Component: 2200 - total flux cleaned = 0.0102498 Jy ! Component: 2250 - total flux cleaned = 0.0106779 Jy ! Component: 2300 - total flux cleaned = 0.0109666 Jy ! Component: 2350 - total flux cleaned = 0.0112581 Jy ! Component: 2400 - total flux cleaned = 0.011554 Jy ! Component: 2450 - total flux cleaned = 0.0117801 Jy ! Component: 2500 - total flux cleaned = 0.0120093 Jy ! Component: 2550 - total flux cleaned = 0.0123205 Jy ! Component: 2600 - total flux cleaned = 0.0124787 Jy ! Component: 2650 - total flux cleaned = 0.0127998 Jy ! Component: 2700 - total flux cleaned = 0.0127995 Jy ! Component: 2750 - total flux cleaned = 0.0128824 Jy ! Component: 2800 - total flux cleaned = 0.0129657 Jy ! Component: 2850 - total flux cleaned = 0.0130519 Jy ! Component: 2900 - total flux cleaned = 0.0132264 Jy ! Component: 2950 - total flux cleaned = 0.013315 Jy ! Component: 3000 - total flux cleaned = 0.0133141 Jy ! Component: 3050 - total flux cleaned = 0.0134997 Jy ! Component: 3100 - total flux cleaned = 0.0134059 Jy ! Component: 3150 - total flux cleaned = 0.0134057 Jy ! Component: 3200 - total flux cleaned = 0.0134058 Jy ! Component: 3250 - total flux cleaned = 0.013506 Jy ! Component: 3300 - total flux cleaned = 0.0135076 Jy ! Component: 3350 - total flux cleaned = 0.0135082 Jy ! Component: 3400 - total flux cleaned = 0.0134012 Jy ! Component: 3450 - total flux cleaned = 0.0135074 Jy ! Component: 3500 - total flux cleaned = 0.0135056 Jy ! Component: 3550 - total flux cleaned = 0.0135056 Jy ! Component: 3600 - total flux cleaned = 0.0136212 Jy ! Component: 3650 - total flux cleaned = 0.0136192 Jy ! Component: 3700 - total flux cleaned = 0.0137395 Jy ! Component: 3750 - total flux cleaned = 0.0136173 Jy ! Component: 3800 - total flux cleaned = 0.0134932 Jy ! Component: 3850 - total flux cleaned = 0.0133639 Jy ! Component: 3900 - total flux cleaned = 0.0134937 Jy ! Component: 3950 - total flux cleaned = 0.0133618 Jy ! Component: 4000 - total flux cleaned = 0.0133618 Jy ! Component: 4050 - total flux cleaned = 0.0130826 Jy ! Total flux subtracted in 4096 components = 0.0130816 Jy ! Clean residual min=-0.008146 max=0.008042 Jy/beam ! Clean residual mean=0.000145 rms=0.002242 Jy/beam ! Combined flux in latest and established models = 0.349492 Jy keep ! Adding 167 model components to the UV plane model. ! The established model now contains 210 components and 0.349493 Jy ![Exited script file: muppet] wmap "J1036-3744_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.596 x 6.965 at 7.651 degrees (North through East) ! Clean map min=-0.026739 max=0.32382 Jy/beam ! Writing clean map to FITS file: J1036-3744_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.323821 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0027204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.52028 2.52028 5.04056 10.0811 20.1622 40.3245 80.649 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0081 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.323 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.596 x 6.965 at 7.651 degrees (North through East) ! Clean map min=-0.026739 max=0.32382 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-3744_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:52:38 2019