! Started logfile: J1036-0605_X_2017_06_10_pus_uvs.log on Mon May 6 12:45:46 2019 obs J1036-0605_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1036-0605_X_2017_06_10_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959259 visibilities/baseline/integration-bin. ! Found source: J1036-0605 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 43512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1036-0605_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.821564Jy sigma=0.007259 ! Fit after self-cal, rms=0.810694Jy sigma=0.007163 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6814 mas, bmaj=1.715 mas, bpa=-2.182 degrees ! Estimated noise=600.272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139309 Jy ! Component: 100 - total flux cleaned = 0.188254 Jy ! Total flux subtracted in 100 components = 0.188254 Jy ! Clean residual min=-0.009867 max=0.040543 Jy/beam ! Clean residual mean=-0.000008 rms=0.003222 Jy/beam ! Combined flux in latest and established models = 0.188254 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.188254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105995Jy sigma=0.000926 ! Fit after self-cal, rms=0.105918Jy sigma=0.000925 ! Inverting map ! Added new window around map position (-5.8, -6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036989 Jy ! Component: 100 - total flux cleaned = 0.058761 Jy ! Total flux subtracted in 100 components = 0.058761 Jy ! Clean residual min=-0.005731 max=0.011890 Jy/beam ! Clean residual mean=-0.000008 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.247015 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.247015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088241Jy sigma=0.000758 ! Fit after self-cal, rms=0.087637Jy sigma=0.000752 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166332 Jy ! Component: 100 - total flux cleaned = 0.028421 Jy ! Total flux subtracted in 100 components = 0.028421 Jy ! Clean residual min=-0.003642 max=0.006827 Jy/beam ! Clean residual mean=-0.000009 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.275436 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.275436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082658Jy sigma=0.000703 ! Fit after self-cal, rms=0.082588Jy sigma=0.000702 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00944974 Jy ! Component: 100 - total flux cleaned = 0.0167475 Jy ! Total flux subtracted in 100 components = 0.0167475 Jy ! Clean residual min=-0.002918 max=0.004342 Jy/beam ! Clean residual mean=-0.000009 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.292184 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.292184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080733Jy sigma=0.000684 ! Fit after self-cal, rms=0.080714Jy sigma=0.000684 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8591 mas, bmaj=2.012 mas, bpa=-1.312 degrees ! Estimated noise=386.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0099628 Jy ! Component: 100 - total flux cleaned = 0.0171249 Jy ! Component: 150 - total flux cleaned = 0.0225416 Jy ! Component: 200 - total flux cleaned = 0.0267656 Jy ! Total flux subtracted in 200 components = 0.0267656 Jy ! Clean residual min=-0.002233 max=0.003973 Jy/beam ! Clean residual mean=-0.000003 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.318949 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 83 components and 0.318949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079166Jy sigma=0.000668 ! Fit after self-cal, rms=0.079139Jy sigma=0.000667 ! Inverting map ! Added new window around map position (-1.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417718 Jy ! Component: 100 - total flux cleaned = 0.00715926 Jy ! Component: 150 - total flux cleaned = 0.00955387 Jy ! Component: 200 - total flux cleaned = 0.0115051 Jy ! Total flux subtracted in 200 components = 0.0115051 Jy ! Clean residual min=-0.002083 max=0.002724 Jy/beam ! Clean residual mean=-0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.330454 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 110 components and 0.330454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078852Jy sigma=0.000664 ! Fit after self-cal, rms=0.078842Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.02 KP 0.97 ! LA 0.96 MK 0.98 NL 0.97 OV 0.98 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00 KP 0.95 ! LA 0.96 MK 0.98 NL 0.98 OV 0.99 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.01 KP 0.96 ! LA 0.99 MK 1.00 NL 0.98 OV 0.99 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.01 KP 0.96 ! LA 0.99 MK 1.00 NL 0.98 OV 0.98 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.99 KP 0.97 ! LA 0.97 MK 1.06 NL 0.99 OV 0.99 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.00 KP 0.97 ! LA 0.99 MK 1.00 NL 1.00 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.01 KP 0.98 ! LA 0.99 MK 1.02 NL 0.99 OV 1.01 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 0.99 KP 0.97 ! LA 0.98 MK 1.04 NL 1.01 OV 0.99 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 0.98 ! LA 1.00 MK 1.02 NL 1.01 OV 1.01 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.00 ! LA 1.00 MK 1.01 NL 1.00 OV 1.01 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.06 KP 0.98 ! LA 1.01 MK 0.93 NL 1.00 OV 1.00 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.03 KP 0.95 ! LA 1.00 MK 1.12 NL 1.00 OV 1.02 ! PT 1.02 SC 1.01 ! ! ! Fit before self-cal, rms=0.078842Jy sigma=0.000664 ! Fit after self-cal, rms=0.078858Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8636 mas, bmaj=2.021 mas, bpa=-1.337 degrees ! Estimated noise=384.561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219569 Jy ! Component: 100 - total flux cleaned = 0.00328102 Jy ! Component: 150 - total flux cleaned = 0.0038915 Jy ! Component: 200 - total flux cleaned = 0.00419951 Jy ! Total flux subtracted in 200 components = 0.00419951 Jy ! Clean residual min=-0.001247 max=0.001182 Jy/beam ! Clean residual mean=-0.000002 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.334654 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 138 components and 0.334654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078787Jy sigma=0.000660 ! Fit after self-cal, rms=0.078791Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078791Jy sigma=0.000660 ! Fit after self-cal, rms=0.078758Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8628 mas, bmaj=2.022 mas, bpa=-1.357 degrees ! Estimated noise=384.834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00097608 Jy ! Component: 100 - total flux cleaned = 0.00146427 Jy ! Component: 150 - total flux cleaned = 0.00173128 Jy ! Component: 200 - total flux cleaned = 0.00190827 Jy ! Total flux subtracted in 200 components = 0.00190827 Jy ! Clean residual min=-0.001092 max=0.000959 Jy/beam ! Clean residual mean=-0.000001 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.336562 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 158 components and 0.336562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078741Jy sigma=0.000659 ! Fit after self-cal, rms=0.078744Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284134 Jy ! Component: 100 - total flux cleaned = 0.000393903 Jy ! Component: 150 - total flux cleaned = 0.000493535 Jy ! Component: 200 - total flux cleaned = 0.000509036 Jy ! Total flux subtracted in 200 components = 0.000509036 Jy ! Clean residual min=-0.001070 max=0.000907 Jy/beam ! Clean residual mean=-0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.337071 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 165 components and 0.337071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078736Jy sigma=0.000659 ! Fit after self-cal, rms=0.078736Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078736Jy sigma=0.000659 ! Fit after self-cal, rms=0.078786Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8621 mas, bmaj=2.022 mas, bpa=-1.414 degrees ! Estimated noise=384.935 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474929 Jy ! Component: 100 - total flux cleaned = 0.000568823 Jy ! Component: 150 - total flux cleaned = 0.000668812 Jy ! Component: 200 - total flux cleaned = 0.000721905 Jy ! Total flux subtracted in 200 components = 0.000721905 Jy ! Clean residual min=-0.001064 max=0.000852 Jy/beam ! Clean residual mean=-0.000002 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.337793 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 173 components and 0.337793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078779Jy sigma=0.000658 ! Fit after self-cal, rms=0.078782Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185279 Jy ! Component: 100 - total flux cleaned = 0.000198392 Jy ! Component: 150 - total flux cleaned = 0.000209958 Jy ! Component: 200 - total flux cleaned = 0.000221087 Jy ! Total flux subtracted in 200 components = 0.000221087 Jy ! Clean residual min=-0.001046 max=0.000839 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.338014 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 178 components and 0.338014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078778Jy sigma=0.000658 ! Fit after self-cal, rms=0.078778Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078778Jy sigma=0.000658 ! Fit after self-cal, rms=0.078742Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.137 mas, bmaj=3.572 mas, bpa=-1.806 degrees ! Estimated noise=497.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003352 Jy ! Component: 100 - total flux cleaned = 0.000434906 Jy ! Component: 150 - total flux cleaned = 0.000452648 Jy ! Component: 200 - total flux cleaned = 0.000452595 Jy ! Total flux subtracted in 200 components = 0.000452595 Jy ! Clean residual min=-0.000931 max=0.000868 Jy/beam ! Clean residual mean=-0.000004 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.338467 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 190 components and 0.338467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078741Jy sigma=0.000658 ! Fit after self-cal, rms=0.078741Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.25839e-05 Jy ! Component: 100 - total flux cleaned = 3.89485e-05 Jy ! Component: 150 - total flux cleaned = 2.11391e-06 Jy ! Component: 200 - total flux cleaned = -2.49979e-05 Jy ! Total flux subtracted in 200 components = -2.49979e-05 Jy ! Clean residual min=-0.000919 max=0.000861 Jy/beam ! Clean residual mean=-0.000004 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.338442 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 191 components and 0.338442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078740Jy sigma=0.000658 ! Fit after self-cal, rms=0.078740Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8616 mas, bmaj=2.022 mas, bpa=-1.441 degrees ! Estimated noise=384.864 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8616 x 2.022 at -1.441 degrees (North through East) ! Clean map min=-0.00092232 max=0.19022 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6831 mas, bmaj=1.725 mas, bpa=-2.261 degrees ! Estimated noise=600.579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138773 Jy ! Component: 100 - total flux cleaned = 0.194525 Jy ! Component: 150 - total flux cleaned = 0.228812 Jy ! Component: 200 - total flux cleaned = 0.251321 Jy ! Total flux subtracted in 200 components = 0.251321 Jy ! Clean residual min=-0.005694 max=0.012274 Jy/beam ! Clean residual mean=-0.000013 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.251321 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.251321 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8616 mas, bmaj=2.022 mas, bpa=-1.441 degrees ! Estimated noise=384.864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022694 Jy ! Component: 100 - total flux cleaned = 0.0375434 Jy ! Component: 150 - total flux cleaned = 0.0480858 Jy ! Component: 200 - total flux cleaned = 0.0559259 Jy ! Total flux subtracted in 200 components = 0.0559259 Jy ! Clean residual min=-0.002633 max=0.004535 Jy/beam ! Clean residual mean=-0.000004 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.307247 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 50 components and 0.307247 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604936 Jy ! Component: 100 - total flux cleaned = 0.010789 Jy ! Component: 150 - total flux cleaned = 0.0145516 Jy ! Component: 200 - total flux cleaned = 0.0175618 Jy ! Total flux subtracted in 200 components = 0.0175618 Jy ! Clean residual min=-0.001536 max=0.001799 Jy/beam ! Clean residual mean=-0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.324809 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 84 components and 0.324809 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243776 Jy ! Component: 100 - total flux cleaned = 0.00442865 Jy ! Component: 150 - total flux cleaned = 0.0060642 Jy ! Component: 200 - total flux cleaned = 0.00741543 Jy ! Total flux subtracted in 200 components = 0.00741543 Jy ! Clean residual min=-0.001106 max=0.001075 Jy/beam ! Clean residual mean=-0.000002 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.332224 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 113 components and 0.332224 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.137 mas, bmaj=3.572 mas, bpa=-1.806 degrees ! Estimated noise=497.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194349 Jy ! Component: 100 - total flux cleaned = 0.00325067 Jy ! Component: 150 - total flux cleaned = 0.00417342 Jy ! Component: 200 - total flux cleaned = 0.00484504 Jy ! Total flux subtracted in 200 components = 0.00484504 Jy ! Clean residual min=-0.001058 max=0.000867 Jy/beam ! Clean residual mean=-0.000004 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.337069 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497884 Jy ! Component: 100 - total flux cleaned = 0.00077602 Jy ! Component: 150 - total flux cleaned = 0.000876791 Jy ! Component: 200 - total flux cleaned = 0.00095229 Jy ! Total flux subtracted in 200 components = 0.00095229 Jy ! Clean residual min=-0.000931 max=0.000848 Jy/beam ! Clean residual mean=-0.000004 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.338022 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 175 components and 0.338022 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8616 mas, bmaj=2.022 mas, bpa=-1.441 degrees ! Estimated noise=384.864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.84722e-05 Jy ! Component: 100 - total flux cleaned = -4.82931e-05 Jy ! Component: 150 - total flux cleaned = -4.87112e-05 Jy ! Component: 200 - total flux cleaned = 1.38183e-05 Jy ! Total flux subtracted in 200 components = 1.38183e-05 Jy ! Clean residual min=-0.000961 max=0.000835 Jy/beam ! Clean residual mean=-0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.338036 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 190 components and 0.338036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078746Jy sigma=0.000658 ! Fit after self-cal, rms=0.078743Jy sigma=0.000658 wmodel J1036-0605_X_2017_06_10_pus_map.mod ! Writing 190 model components to file: J1036-0605_X_2017_06_10_pus_map.mod wobs J1036-0605_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1036-0605_X_2017_06_10_pus_uvs.fits wwins J1036-0605_X_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1036-0605_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123088 Jy ! Component: 100 - total flux cleaned = -0.000197106 Jy ! Component: 150 - total flux cleaned = -0.000239576 Jy ! Component: 200 - total flux cleaned = -0.000239514 Jy ! Component: 250 - total flux cleaned = -0.000252864 Jy ! Component: 300 - total flux cleaned = -0.000252752 Jy ! Component: 350 - total flux cleaned = -0.000252779 Jy ! Component: 400 - total flux cleaned = -0.00024027 Jy ! Component: 450 - total flux cleaned = -0.000227861 Jy ! Component: 500 - total flux cleaned = -0.000155859 Jy ! Component: 550 - total flux cleaned = -0.000132475 Jy ! Component: 600 - total flux cleaned = -9.78047e-05 Jy ! Component: 650 - total flux cleaned = -7.51207e-05 Jy ! Component: 700 - total flux cleaned = -5.25619e-05 Jy ! Component: 750 - total flux cleaned = -8.47363e-06 Jy ! Component: 800 - total flux cleaned = 2.16547e-06 Jy ! Component: 850 - total flux cleaned = 2.17006e-06 Jy ! Component: 900 - total flux cleaned = 3.38722e-05 Jy ! Component: 950 - total flux cleaned = 6.50303e-05 Jy ! Component: 1000 - total flux cleaned = 6.48201e-05 Jy ! Component: 1050 - total flux cleaned = 7.49199e-05 Jy ! Component: 1100 - total flux cleaned = 5.48825e-05 Jy ! Component: 1150 - total flux cleaned = 0.000114694 Jy ! Component: 1200 - total flux cleaned = 9.48478e-05 Jy ! Component: 1250 - total flux cleaned = 0.000104588 Jy ! Component: 1300 - total flux cleaned = 8.52183e-05 Jy ! Component: 1350 - total flux cleaned = 8.51958e-05 Jy ! Component: 1400 - total flux cleaned = 9.47054e-05 Jy ! Component: 1450 - total flux cleaned = 9.45486e-05 Jy ! Component: 1500 - total flux cleaned = 7.59472e-05 Jy ! Component: 1550 - total flux cleaned = 6.67182e-05 Jy ! Component: 1600 - total flux cleaned = 7.58941e-05 Jy ! Component: 1650 - total flux cleaned = 7.61052e-05 Jy ! Component: 1700 - total flux cleaned = 0.000102973 Jy ! Component: 1750 - total flux cleaned = 0.00010305 Jy ! Component: 1800 - total flux cleaned = 0.000120731 Jy ! Component: 1850 - total flux cleaned = 0.00013826 Jy ! Component: 1900 - total flux cleaned = 0.000146788 Jy ! Component: 1950 - total flux cleaned = 0.000172537 Jy ! Component: 2000 - total flux cleaned = 0.000163938 Jy ! Total flux subtracted in 2048 components = 0.000147104 Jy ! Clean residual min=-0.000536 max=0.000437 Jy/beam ! Clean residual mean=-0.000002 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.338183 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 337 components and 0.338183 Jy ![Exited script file: muppet] wmap "J1036-0605_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8616 x 2.022 at -1.441 degrees (North through East) ! Clean map min=-0.00076138 max=0.19018 Jy/beam ! Writing clean map to FITS file: J1036-0605_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.190175 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161114 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.254155 0.254155 0.50831 1.01662 2.03324 4.06648 8.13297 16.2659 32.5319 65.0637 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.19 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8616 x 2.022 at -1.441 degrees (North through East) ! Clean map min=-0.00076138 max=0.19018 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1036-0605_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:45:49 2019