! Started logfile: J1035+5040_S_2017_06_10_pus_uvs.log on Mon May 6 14:51:34 2019 obs J1035+5040_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1035+5040_S_2017_06_10_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.980218 visibilities/baseline/integration-bin. ! Found source: J1035+5040 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 30524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1035+5040_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 926 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.835313Jy sigma=0.008361 ! Fit after self-cal, rms=0.820803Jy sigma=0.008217 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=4.06 mas, bpa=0.4256 degrees ! Estimated noise=837.315 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138227 Jy ! Component: 100 - total flux cleaned = 0.170042 Jy ! Total flux subtracted in 100 components = 0.170042 Jy ! Clean residual min=-0.008167 max=0.038783 Jy/beam ! Clean residual mean=-0.000007 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 0.170042 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.170042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093141Jy sigma=0.000904 ! Fit after self-cal, rms=0.093135Jy sigma=0.000904 ! Inverting map ! Added new window around map position (-6.5, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316502 Jy ! Component: 100 - total flux cleaned = 0.045842 Jy ! Total flux subtracted in 100 components = 0.045842 Jy ! Clean residual min=-0.005942 max=0.007896 Jy/beam ! Clean residual mean=-0.000001 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.215884 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.215884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079668Jy sigma=0.000761 ! Fit after self-cal, rms=0.078351Jy sigma=0.000747 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126645 Jy ! Component: 100 - total flux cleaned = 0.0208173 Jy ! Total flux subtracted in 100 components = 0.0208173 Jy ! Clean residual min=-0.004261 max=0.004901 Jy/beam ! Clean residual mean=0.000004 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.236701 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.236701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075407Jy sigma=0.000716 ! Fit after self-cal, rms=0.075287Jy sigma=0.000714 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680149 Jy ! Component: 100 - total flux cleaned = 0.0119068 Jy ! Total flux subtracted in 100 components = 0.0119068 Jy ! Clean residual min=-0.003866 max=0.003689 Jy/beam ! Clean residual mean=0.000006 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.248608 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.248608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074322Jy sigma=0.000704 ! Fit after self-cal, rms=0.074306Jy sigma=0.000704 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.896 mas, bmaj=4.968 mas, bpa=1.685 degrees ! Estimated noise=458.512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611244 Jy ! Component: 100 - total flux cleaned = 0.00997279 Jy ! Component: 150 - total flux cleaned = 0.0126256 Jy ! Component: 200 - total flux cleaned = 0.0144672 Jy ! Total flux subtracted in 200 components = 0.0144672 Jy ! Clean residual min=-0.002414 max=0.002383 Jy/beam ! Clean residual mean=0.000017 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.263075 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 0.263075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073703Jy sigma=0.000698 ! Fit after self-cal, rms=0.073682Jy sigma=0.000698 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 0.97 KP 1.03 ! LA 1.02 MK 1.03 NL 0.89 OV 1.01 ! PT 1.03 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.99 KP 0.99 ! LA 0.97 MK 1.04 NL 1.09 OV 1.05 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.01 HN 0.99 KP 0.98 ! LA 1.01 MK 1.06 NL 0.97 OV 0.95 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.97 KP 1.00* ! LA 1.01 MK 1.19 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.073682Jy sigma=0.000698 ! Fit after self-cal, rms=0.072652Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=4.997 mas, bpa=2.546 degrees ! Estimated noise=456.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179543 Jy ! Component: 100 - total flux cleaned = 0.00212845 Jy ! Component: 150 - total flux cleaned = 0.00218539 Jy ! Component: 200 - total flux cleaned = 0.00224986 Jy ! Total flux subtracted in 200 components = 0.00224986 Jy ! Clean residual min=-0.001718 max=0.001897 Jy/beam ! Clean residual mean=0.000016 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.265325 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.265325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072607Jy sigma=0.000687 ! Fit after self-cal, rms=0.072617Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072617Jy sigma=0.000687 ! Fit after self-cal, rms=0.072503Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=4.999 mas, bpa=2.099 degrees ! Estimated noise=456.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072293 Jy ! Component: 100 - total flux cleaned = 0.000970255 Jy ! Component: 150 - total flux cleaned = 0.000971352 Jy ! Component: 200 - total flux cleaned = 0.000972092 Jy ! Total flux subtracted in 200 components = 0.000972092 Jy ! Clean residual min=-0.001300 max=0.001275 Jy/beam ! Clean residual mean=0.000007 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.266297 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 90 components and 0.266297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072483Jy sigma=0.000683 ! Fit after self-cal, rms=0.072483Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120513 Jy ! Component: 100 - total flux cleaned = 0.000120641 Jy ! Component: 150 - total flux cleaned = 0.000136563 Jy ! Component: 200 - total flux cleaned = 0.000137016 Jy ! Total flux subtracted in 200 components = 0.000137016 Jy ! Clean residual min=-0.001246 max=0.001265 Jy/beam ! Clean residual mean=0.000007 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.266434 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 93 components and 0.266434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072476Jy sigma=0.000683 ! Fit after self-cal, rms=0.072475Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072475Jy sigma=0.000683 ! Fit after self-cal, rms=0.072521Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=4.999 mas, bpa=1.965 degrees ! Estimated noise=456.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195614 Jy ! Component: 100 - total flux cleaned = 0.000179776 Jy ! Component: 150 - total flux cleaned = 0.000180062 Jy ! Component: 200 - total flux cleaned = 0.000194921 Jy ! Total flux subtracted in 200 components = 0.000194921 Jy ! Clean residual min=-0.001216 max=0.001209 Jy/beam ! Clean residual mean=0.000007 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.266629 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 94 components and 0.266629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072514Jy sigma=0.000683 ! Fit after self-cal, rms=0.072514Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73184e-05 Jy ! Component: 100 - total flux cleaned = 4.07945e-05 Jy ! Component: 150 - total flux cleaned = 5.36288e-05 Jy ! Component: 200 - total flux cleaned = 7.77109e-05 Jy ! Total flux subtracted in 200 components = 7.77109e-05 Jy ! Clean residual min=-0.001205 max=0.001220 Jy/beam ! Clean residual mean=0.000007 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.266707 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 95 components and 0.266706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072510Jy sigma=0.000683 ! Fit after self-cal, rms=0.072510Jy sigma=0.000683 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072510Jy sigma=0.000683 ! Fit after self-cal, rms=0.072540Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.079 mas, bmaj=8.624 mas, bpa=16.96 degrees ! Estimated noise=566.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220994 Jy ! Component: 100 - total flux cleaned = 0.000233461 Jy ! Component: 150 - total flux cleaned = 0.000232922 Jy ! Component: 200 - total flux cleaned = 0.000232853 Jy ! Total flux subtracted in 200 components = 0.000232853 Jy ! Clean residual min=-0.001067 max=0.001249 Jy/beam ! Clean residual mean=0.000015 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.266939 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 95 components and 0.266939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072541Jy sigma=0.000683 ! Fit after self-cal, rms=0.072541Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.51212e-06 Jy ! Component: 100 - total flux cleaned = 1.55545e-05 Jy ! Component: 150 - total flux cleaned = 2.67255e-05 Jy ! Component: 200 - total flux cleaned = 4.0983e-05 Jy ! Total flux subtracted in 200 components = 4.0983e-05 Jy ! Clean residual min=-0.001060 max=0.001242 Jy/beam ! Clean residual mean=0.000015 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.26698 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 96 components and 0.26698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072543Jy sigma=0.000683 ! Fit after self-cal, rms=0.072543Jy sigma=0.000683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=4.999 mas, bpa=1.892 degrees ! Estimated noise=457.102 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.943 x 4.999 at 1.892 degrees (North through East) ! Clean map min=-0.0011953 max=0.17739 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=4.099 mas, bpa=1.076 degrees ! Estimated noise=839.699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138564 Jy ! Component: 100 - total flux cleaned = 0.185416 Jy ! Component: 150 - total flux cleaned = 0.207494 Jy ! Component: 200 - total flux cleaned = 0.221184 Jy ! Total flux subtracted in 200 components = 0.221184 Jy ! Clean residual min=-0.003611 max=0.007774 Jy/beam ! Clean residual mean=-0.000005 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.221184 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.221184 Jy ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=4.999 mas, bpa=1.892 degrees ! Estimated noise=457.102 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144236 Jy ! Component: 100 - total flux cleaned = 0.023838 Jy ! Component: 150 - total flux cleaned = 0.0303085 Jy ! Component: 200 - total flux cleaned = 0.0348443 Jy ! Total flux subtracted in 200 components = 0.0348443 Jy ! Clean residual min=-0.001690 max=0.002750 Jy/beam ! Clean residual mean=0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.256028 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 67 components and 0.256028 Jy ! Inverting map ! Added new window around map position (-10, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330412 Jy ! Component: 100 - total flux cleaned = 0.00566249 Jy ! Component: 150 - total flux cleaned = 0.00737271 Jy ! Component: 200 - total flux cleaned = 0.00857438 Jy ! Total flux subtracted in 200 components = 0.00857438 Jy ! Clean residual min=-0.001219 max=0.001378 Jy/beam ! Clean residual mean=0.000006 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.264602 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.264602 Jy ! Inverting map ! Added new window around map position (-79.5, 121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104431 Jy ! Component: 100 - total flux cleaned = 0.00157641 Jy ! Component: 150 - total flux cleaned = 0.00182202 Jy ! Component: 200 - total flux cleaned = 0.00195914 Jy ! Total flux subtracted in 200 components = 0.00195914 Jy ! Clean residual min=-0.001189 max=0.001159 Jy/beam ! Clean residual mean=0.000003 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.266562 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.266562 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.079 mas, bmaj=8.624 mas, bpa=16.96 degrees ! Estimated noise=566.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372765 Jy ! Component: 100 - total flux cleaned = 0.000476939 Jy ! Component: 150 - total flux cleaned = 0.000520075 Jy ! Component: 200 - total flux cleaned = 0.000520155 Jy ! Total flux subtracted in 200 components = 0.000520155 Jy ! Clean residual min=-0.000991 max=0.001110 Jy/beam ! Clean residual mean=0.000006 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.267082 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.27608e-05 Jy ! Component: 100 - total flux cleaned = 4.40857e-05 Jy ! Component: 150 - total flux cleaned = 5.41207e-05 Jy ! Component: 200 - total flux cleaned = 7.30379e-05 Jy ! Total flux subtracted in 200 components = 7.30379e-05 Jy ! Clean residual min=-0.000968 max=0.001096 Jy/beam ! Clean residual mean=0.000007 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.267155 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 132 components and 0.267155 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.943 mas, bmaj=4.999 mas, bpa=1.892 degrees ! Estimated noise=457.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.8846e-05 Jy ! Component: 100 - total flux cleaned = -0.000111891 Jy ! Component: 150 - total flux cleaned = -0.000191042 Jy ! Component: 200 - total flux cleaned = -0.000247188 Jy ! Total flux subtracted in 200 components = -0.000247188 Jy ! Clean residual min=-0.001181 max=0.001143 Jy/beam ! Clean residual mean=0.000003 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.266908 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 142 components and 0.266908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072506Jy sigma=0.000683 ! Fit after self-cal, rms=0.072502Jy sigma=0.000683 wmodel J1035+5040_S_2017_06_10_pus_map.mod ! Writing 142 model components to file: J1035+5040_S_2017_06_10_pus_map.mod wobs J1035+5040_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1035+5040_S_2017_06_10_pus_uvs.fits wwins J1035+5040_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1035+5040_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.71122e-06 Jy ! Component: 100 - total flux cleaned = 0.000115699 Jy ! Component: 150 - total flux cleaned = 0.00026728 Jy ! Component: 200 - total flux cleaned = 0.000431226 Jy ! Component: 250 - total flux cleaned = 0.000537122 Jy ! Component: 300 - total flux cleaned = 0.000605297 Jy ! Component: 350 - total flux cleaned = 0.000654902 Jy ! Component: 400 - total flux cleaned = 0.000703499 Jy ! Component: 450 - total flux cleaned = 0.000750632 Jy ! Component: 500 - total flux cleaned = 0.000735165 Jy ! Component: 550 - total flux cleaned = 0.000780809 Jy ! Component: 600 - total flux cleaned = 0.00078097 Jy ! Component: 650 - total flux cleaned = 0.000810478 Jy ! Component: 700 - total flux cleaned = 0.000839303 Jy ! Component: 750 - total flux cleaned = 0.000810765 Jy ! Component: 800 - total flux cleaned = 0.00081092 Jy ! Component: 850 - total flux cleaned = 0.000824806 Jy ! Component: 900 - total flux cleaned = 0.000811101 Jy ! Component: 950 - total flux cleaned = 0.000838199 Jy ! Component: 1000 - total flux cleaned = 0.000864955 Jy ! Component: 1050 - total flux cleaned = 0.000891446 Jy ! Component: 1100 - total flux cleaned = 0.000891214 Jy ! Component: 1150 - total flux cleaned = 0.000891203 Jy ! Component: 1200 - total flux cleaned = 0.000916606 Jy ! Component: 1250 - total flux cleaned = 0.000916429 Jy ! Component: 1300 - total flux cleaned = 0.000891295 Jy ! Component: 1350 - total flux cleaned = 0.000854187 Jy ! Component: 1400 - total flux cleaned = 0.00084206 Jy ! Component: 1450 - total flux cleaned = 0.000854324 Jy ! Component: 1500 - total flux cleaned = 0.000842274 Jy ! Component: 1550 - total flux cleaned = 0.000842232 Jy ! Component: 1600 - total flux cleaned = 0.000842124 Jy ! Component: 1650 - total flux cleaned = 0.000818476 Jy ! Component: 1700 - total flux cleaned = 0.000806886 Jy ! Component: 1750 - total flux cleaned = 0.000818567 Jy ! Component: 1800 - total flux cleaned = 0.000818486 Jy ! Component: 1850 - total flux cleaned = 0.000773104 Jy ! Component: 1900 - total flux cleaned = 0.00085215 Jy ! Component: 1950 - total flux cleaned = 0.000829613 Jy ! Component: 2000 - total flux cleaned = 0.000851876 Jy ! Component: 2050 - total flux cleaned = 0.000851819 Jy ! Component: 2100 - total flux cleaned = 0.000819119 Jy ! Component: 2150 - total flux cleaned = 0.00084097 Jy ! Component: 2200 - total flux cleaned = 0.000841039 Jy ! Component: 2250 - total flux cleaned = 0.000862431 Jy ! Component: 2300 - total flux cleaned = 0.000862452 Jy ! Component: 2350 - total flux cleaned = 0.000862559 Jy ! Component: 2400 - total flux cleaned = 0.000894127 Jy ! Component: 2450 - total flux cleaned = 0.000914928 Jy ! Component: 2500 - total flux cleaned = 0.000956285 Jy ! Component: 2550 - total flux cleaned = 0.0009769 Jy ! Component: 2600 - total flux cleaned = 0.00102766 Jy ! Component: 2650 - total flux cleaned = 0.0010478 Jy ! Component: 2700 - total flux cleaned = 0.00110807 Jy ! Component: 2750 - total flux cleaned = 0.00112808 Jy ! Component: 2800 - total flux cleaned = 0.00114791 Jy ! Component: 2850 - total flux cleaned = 0.00116754 Jy ! Component: 2900 - total flux cleaned = 0.00119694 Jy ! Component: 2950 - total flux cleaned = 0.00122604 Jy ! Component: 3000 - total flux cleaned = 0.00123581 Jy ! Component: 3050 - total flux cleaned = 0.00126464 Jy ! Component: 3100 - total flux cleaned = 0.00126467 Jy ! Component: 3150 - total flux cleaned = 0.00131196 Jy ! Component: 3200 - total flux cleaned = 0.00133077 Jy ! Component: 3250 - total flux cleaned = 0.00134005 Jy ! Component: 3300 - total flux cleaned = 0.00133077 Jy ! Component: 3350 - total flux cleaned = 0.00135853 Jy ! Component: 3400 - total flux cleaned = 0.00140445 Jy ! Component: 3450 - total flux cleaned = 0.00140449 Jy ! Component: 3500 - total flux cleaned = 0.00142271 Jy ! Component: 3550 - total flux cleaned = 0.0014407 Jy ! Component: 3600 - total flux cleaned = 0.00146761 Jy ! Component: 3650 - total flux cleaned = 0.00149444 Jy ! Component: 3700 - total flux cleaned = 0.00151233 Jy ! Component: 3750 - total flux cleaned = 0.00154772 Jy ! Component: 3800 - total flux cleaned = 0.00156542 Jy ! Component: 3850 - total flux cleaned = 0.00157415 Jy ! Component: 3900 - total flux cleaned = 0.00160029 Jy ! Component: 3950 - total flux cleaned = 0.00162632 Jy ! Component: 4000 - total flux cleaned = 0.00166946 Jy ! Component: 4050 - total flux cleaned = 0.00167801 Jy ! Total flux subtracted in 4096 components = 0.0017378 Jy ! Clean residual min=-0.000490 max=0.000477 Jy/beam ! Clean residual mean=0.000001 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.268645 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 415 components and 0.268646 Jy ![Exited script file: muppet] wmap "J1035+5040_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.943 x 4.999 at 1.892 degrees (North through East) ! Clean map min=-0.0010515 max=0.17754 Jy/beam ! Writing clean map to FITS file: J1035+5040_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.177536 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151863 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.256618 0.256618 0.513236 1.02647 2.05294 4.10589 8.21178 16.4236 32.8471 65.6942 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.177 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.943 x 4.999 at 1.892 degrees (North through East) ! Clean map min=-0.0010515 max=0.17754 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1035+5040_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:51:40 2019